A long, current-carrying solenoid with an air core has 1550 turns per meter of length and a radius of 0.0240 m. A coil of 200 turns is wrapped tightly around the outside of the solenoid, so it has virtually the same radius as the solenoid. What is the mutual inductance of this system

Answers

Answer 1

Answer:

[tex]M=7.05*10^{-4}[/tex]

Explanation:

From the question we are told that:

Coil one turns N_1=1550 Turns/m

Radius [tex]r=0.0240m[/tex]

Turns 2 [tex]N_2=200N[/tex]

Generally the equation for area is mathematically given by

[tex]A=\pi*r^2[/tex]

[tex]A=\pi*0.024^2[/tex]

[tex]A=\1.81*10^{-3} m^2[/tex]

Therefore

The mutual inductance of this system is

[tex]M=\mu*N_1*N_2*A[/tex]

[tex]M=(4 \pi*10^{-7})*1550*200*1.81*10^{-3}[/tex]

[tex]M=7.05*10^{-4}[/tex]


Related Questions

Choose one. 5 points
Use the equation from week 3:
frequency =
wavespeed
wavelength
and the wavelength you found in #3 to calculate the frequency of this photon (remember the speed of
light is 3E8 m/s);
7.6E14 Hz
6.0E14 Hz
4,6E14 Hz

Answers

Is 4,6E14 Hz
Good luck

The frequency is 4,6E14 Hz.

What is the frequency?

Frequency is the fee at which modern changes direction in step with 2nd. it's far measured in hertz (Hz), a worldwide unit of degree wherein 1 hertz is identical to 1 cycle in line with 2d. Hertz (Hz) = One hertz is the same as 1 cycle in step with the second. Cycle = One entire wave of alternating present-day voltage.

Frequency describes the number of waves that pass a hard and fast place in a given quantity of time. So if the time it takes for a wave to skip is half of 2d, the frequency is 2 per 2nd. If it takes 1/one hundred of an hour, the frequency is a hundred in step with hour.

Learn more about frequency here:-https://brainly.com/question/254161

#SPJ2

A cylindrical swimming pool has a radius 2m and depth 1.3m .it is completely filled with salt water of specific gravity 1.03.The atmospheric preassure is 1.013 x 10^5 Pa.

a.calculate the density of salt water.

Answers

Answer:

the density of the salt water is 1030 kg/m³

Explanation:

Given;

radius of the cylindrical pool, r = 2 m

depth of the pool, h = 1.3 m

specific gravity of the salt water, γ = 1.03

The atmospheric pressure, P₀ = 1.013 x 10⁵ Pa

Density of fresh water, [tex]\rho _w[/tex] = 1000 kg/m³

The density of the salt water is calculated as;

[tex]Specific \ gravity \ of \ salt\ water \ (\gamma _s_w) = \frac{density \ of \ salt \ water \ (\rho_{sw})}{density \ of \ fresh \ water \ (\rho_{w})} \\\\1.03 = \frac{\rho_{sw}}{1000 \ kg/m^3}\\\\\rho_{sw} = 1.03 \times 1000 \ kg/m^3\\\\\rho_{sw} = 1030 \ kg/m^3[/tex]

Therefore, the density of the salt water is 1030 kg/m³

Vector a has a magnitude of 8 and makes an angle of 45 with positive x axis vector B has also the same magnitude of 8 units and direction along the

Answers

Answer:

prove that Sin^6 ϴ-cos^6ϴ=(2Sin^2ϴ-1)(cos^2ϴ+sin^4ϴ)

please sove step by step with language it is opt maths question

The answer is:

A + B = 6,123 units at angle 112,5 degrees.
A - B = 14,782 units at angle 22,5 degrees.

Choose the appropriate explanation how such a low value is possible given Saturn's large mass - 100 times that of Earth.

a. This low value is possible because the magnetic field of Saturn is so strong.
b. This low value is possible because the magnetic field of Saturn is so weak.
c. This low value is possible because the density of Saturn is so high.
d. This low value is possible because the density of Saturn is so low.

Answers

Answer:

Explanation:

That is an amazing fact.

The minus sign is what you have to pay attention to. The earth has a mass of 100 times that of Saturn. As someone on here once noted, Saturn has such a low density that it would float in water.

The answer is D

The cart travels the track again and now experiences a constant tangential acceleration from point A to point C. The speeds of the cart are 11.0 ft/s at point A and 18.0 ft/s at point C. The cart takes 5.00 s to go from point A to point C, and the cart takes 1.30 s to go from point B to point C. What is the cart's speed at point B

Answers

Answer:

The speed at B is 16.18 ft/s .

Explanation:

Speed at A, u = 11 ft/s

Speed at C, v' = 18 ft/s

Time from A to C = 5 s

Time from B to C = 1.3 s

Let the speed of car at B is v.

Let the acceleration is a.

From A to B

Use first equation of motion

v = u + a t

18 = 11 + a x 5

a = 1.4 ft/s^2

Let the time from A to B is t' .

t' = 5 - 1.3 = 3.7 s

Use first equation of motion from A to B

v = 11 + 1.4 x 3.7 = 16.18 ft/s  

Chameleons catch insects with their tongues, which they can rapidly extend to great lengths. In a typical strike, the chameleon's tongue accelerates at a remarkable 220 m/s^2 for 20 msms, then travels at constant speed for another 30 ms.

Required:
During this total time of 50 ms, 1/20 of a second, how far does the tongue reach?

Answers

Solution :

We know,

Distance,

[tex]$S=ut+\frac{1}{2}at^2$[/tex]

[tex]$S=ut+0.5(a)(t)^2$[/tex]

For the first 20 ms,

[tex]$S=0+0.5(220)(0.020)^2$[/tex]

S = 0.044 m

In the remaining 30 ms, it has constant velocity.

[tex]$v=u+at$[/tex]

[tex]$v=0+(220)(0.020)[/tex]

v = 4.4 m/s

Therefore,

[tex]$S=ut+0.5(a)(t)^2$[/tex]

[tex]$S'=4.4 \times 0.030[/tex]

S' = 0.132 m

So, the required distance is = S + S'

                                              = 0.044 + 0.132

                                              = 0.176 m

Therefore, the tongue can reach = 0.176 m or 17.6 cm

Answer:

The total distance is 0.176 m.

Explanation:

For t = 0 s to t = 20 ms

initial velocity, u = 0

acceleration, a = 220 m/s^2

time, t = 20 ms

Let the final speed is v.

Use first equation of motion

v = u + at

v = 0 + 220 x 0.02 = 4.4 m/s

Let the distance is s.

Use second equation of motion

[tex]s = u t + 0.5 at^2\\\\s = 0 + 0.5 \times 220 \times 0.02\times 0.02\\\\s = 0.044 m[/tex]

Now the distance is

s' = v x t

s' = 4.4 x 0.03 = 0.132 m

The total distance is

S = s + s' = 0.044 + 0.132 = 0.176 m

A painter sets up a uniform plank so that he can paint a high wall. The plank is 2 m long and weighs 400 N. The two supports holding up the plank are placed 0.2 m from either end. Show that the upwards force on each of the planks is 200 N. Draw a sketch.

Answers

The upward force on each supporting plank is 200 N

The given parameters include;

weight of the plank, W₁ = 400 Nlength of the plank, l = 2 mupward force of each supporting plank, = W₂ and W₃

To show that the upward force of each supporting plank is 200 N, make the following sketch.

                 W₂                                                           W₃

                  ↑                                                              ↑                                                              

           -----------------------------------------------------------------------

              0.2m                         ↓                               0.2m

                                              400 N

The two supporting planks keeps the 2m plank in equilibrium position. If the plank is in equilibrium position the sum of the upward forces equals sum of the downward force.

W₂  +   W₃ = 400 N

But the distance of each supporting plank from the end is equal, (0.2m).

Then, W₂  =  W₃

2W₂ = 400 N

W₂ = 400N/2

W₂ = 200 N

W₃ = 200 N

Therefore, the upward force on each supporting plank that keeps the plank in equilibrium position is 200 N.

To learn more about equilibrium forces visit: https://brainly.com/question/12582625

herical piece of candy is suspended in flowing water. The candy has a density of 1950 kg/m3 and has a 1.0 cm diameter. The water velocity is 1.0 m/s, the water density is assumed to be 1000.0 kg/m3, and the water viscosity is 1.010-3 kg/m/s. The diffusion coefficient of the candy solute in water is 2.010-9 m2/s, and the solubility of the candy solute in water is 2.0 kg/m3. Calculate the mass tran

Answers

Answer: Below is the complete question

A spherical piece of candy is suspended in flowing water. The candy has a density of 1950 kg/m3 and has a 1.0 cm diameter. The water velocity is 1.0 m/s, the water density is assumed to be 1000.0 kg/m3, and the water viscosity is 1.0x10-3 kg/m/s. The diffusion coefficient of the candy solute in water is 2.0x10-9 m2/s, and the solubility of the candy solute in water is 2.0 kg/m3. Calculate the mass transfer coefficient (m/s)

answer:

mass transfer coefficient = 9.56 * 10^-5 m/s

Explanation:

Candy density = 1950 kg/m^3

Candy diameter = 1 cm

Velocity of water = 1 m/s

water density = 1000 kg/m^3

Viscosity of water = 1 * 10^-3 kg/m/s

diffusion coefficient of candy in water = 2 * 10^-9 m^2/s

solubility of candy = 2 kg/m^3

Determine the mass transfer coefficient ( m/s )

( Sh) mass transfer coefficient ( flow across sphere ) = 2 + 0.6Re^1/2 * SC^1/3

where : Re = vdp / μ ,   Sh = KLd / Deff

attached below is the remaining solution .

mass transfer coefficient =  9.56 * 10^-5 m/s

If a proton and electron both move through the same displacement in an electric field, is the change in potential energy associated with the proton equal in magnitude and opposite in sign to the change in potential energy associated with the electron?

a. The magnitude of the change is smaller for the proton.
b. The magnitude of the change is larger for the proton.
c. The signs Of the two changes in potential energy are opposite.
d. They are equal in magnitude.
e. The signs of the two changes in potential energy are the same.

Answers

Answer: They are equal in magnitude.

- The signs of the two changes in potential energy are opposite

Explanation:

When the proton and electron both move through the same displacement in an electric field, the change in potential energy that is associated with the proton is equal in magnitude.

Also, it should be noted that the signs of the two changes in potential energy are opposite.

A man standing in an elevator holds a spring scale with a load of 5 kg suspended from it. What would be the reading of the scale, if the elevator is accelerating downward with an acceleration 3.8 m/s?.

Answers

Answer:

3.1 kg

Explanation:

Applying,

R = m(g-a)..................... Equation 1

Where R = weight of the scale when the elevator is coming down, a = acceleration of the elevator, g = acceleration due to gravith.

From the question,

Given: m = 5 kg, a = 3.8 m/s²

Constant: g = 9.8 m/s²

Substitute these values into equation 1

R = 5(9.8-3.8)

R = 5(6)

R = 30 N

Hence the spring scale is

m' = R/g

m' = 30/9.8

m' = 3.1 kg

A refrigerator has a coefficient of performance equal to 4.00. The refrigerator takes in 110 J of energy from a cold reservoir in each cycle. (a) Find the work required in each cycle. J (b) Find the energy expelled to the hot reservoir. J

Answers

Answer:

The correct answer is:

(a) 27.5 Joules

(b) 141.5 Joules

Explanation:

Given:

Energy,

[tex]Q_c = 110 \ J[/tex]

Coefficient of performance refrigerator,

[tex]Cop(refrig)=4[/tex]

(a)

As we know,

⇒ [tex]Cop(refrig) = \frac{Q_c}{Work}[/tex]

or,

⇒ [tex]Work=\frac{Q_c}{Cop(refrig)}[/tex]

              [tex]=\frac{110}{4}[/tex]

              [tex]=27.5 \ Joules[/tex]

(b)

⇒ [tex]Heat \ expelled = Heat \ removed +Work \ done[/tex]

or,

⇒ [tex]Q_h = Q_c+Work[/tex]

         [tex]=114+27.5[/tex]

         [tex]=141.5 \ Joules[/tex]

A diffraction grating has 6000 lines per centimeter ruled on it. What is the angular separation (in degrees) between the second and the third orders on the same side of the central bright fringe when the grating is illuminated with a beam of light of wavelength 500 nm

Answers

Explanation:

Hope it Will help he hsuejwoamxgehanwpalasmbwfwfqoqlmdbehendalmZbgevzuxwllw. yeh we pabdvddxhspapalw. X

The angular separation (in degrees) between the second and the third orders on the same side of the central bright fringe if the wavelength is 500 nm and A diffraction grating has 6000 lines per centimeter ruled on it, is  27.29°.

What is diffraction?

Waves spreading outward around obstructions are known as diffraction. Sound, electromagnetic radiation like light, X-rays, and gamma rays, as well as very small moving particles like atoms, neutrons, and electrons that exhibit wavelike qualities all exhibit diffraction.

Given:

The number of lines = 6000 per cm,

The Wavelength, λ = 500 nm = 500 × 10 ⁻⁹ m

Calculate the diffraction grating,

[tex]d = 1 / no\ of\ lines[/tex]

d = 10⁻² / 6000 m,

Calculate the second-order maxima angle and third-order maxima angle by the formula given below,

[tex]dsin\theta_1 = n_1 \lambda[/tex]

[tex]sin\theta_1 = n_1\lambda / d[/tex]

[tex]\theta _1 = sin^{-1}[2\times 500\times 10 ^{-9}/10^{-2}\times 6000][/tex]

θ₁ = sin⁻¹(0.6)

θ₁ = 36.87°

Similarly, for θ₂,

θ₂ = sin⁻¹(3 × 500 × 10 ⁻⁹ / 10⁻² × 6000)

θ₂ = sin⁻¹(0.9)

θ₂ = 64.16°

Calculate the separation as follows,

θ₂ - θ₁ = 64.16° - 36.87°

θ₂ - θ₁ =  27.29°

Therefore, the angular separation (in degrees) between the second and the third orders on the same side of the central bright fringe if the wavelength is 500 nm and A diffraction grating has 6000 lines per centimeter ruled on it, is  27.29°.

To know more about diffraction:

https://brainly.com/question/12290582

#SPJ2

Cuando el pistón tiene un volumen de 2x10^-4 m^3, el gas en el pistón está a una presión de 150 kPa. El área del pistón es 0.00133 m^2. Calcular la fuerza que el gas ejerce sobre el embolo del pistón.

Answers

Answer:

F = 1.128 10⁸ Pa

Explanation:

Pressure is defined by

         P = F / A

If the gas is ideal for equal force eds on all the walls, so on the piston area we have

        F = P A

We reduce the pressure to the SI system

       P = 150 kpa (1000 Pa / 1kPa = 150 103 Pa

we calculate

       F = 150 10³ / 0.00133

       F = 1.128 10⁸ Pa

An electron is released from rest at a distance of 9.00 cm from a fixed proton. How fast will the electron be moving when it is 3.00 cm from the proton

Answers

Answer:

the  speed of the electron at the given position is 106.2 m/s

Explanation:

Given;

initial position of the electron, r = 9 cm = 0.09 m

final position of the electron, r₂ = 3 cm = 0.03 m

let the speed of the electron at the given position = v

The initial potential energy of the electron is calculated as;

[tex]U_i = Fr = \frac{kq^2}{r^2} \times r = \frac{kq^2}{r} \\\\U_i = \frac{(9\times 10^9)(1.602\times 10^{-19})^2}{0.09} \\\\U_i = 2.566 \times 10^{-27} \ J[/tex]

When the electron is 3 cm from the proton, the final potential energy of the electron is calculated as;

[tex]U_f = \frac{kq^2}{r_2} \\\\U_f = [\frac{(9\times 10^9)\times (1.602 \times 10^{-19})^2}{0.03} ]\\\\U_f = 7.669 \times 10^{-27} \ J \\\\\Delta U = U_f -U_i\\\\\Delta U = (7.699\times 10^{-27} \ J ) - (2.566 \times 10^{-27} \ J)\\\\\Delta U = 5.133 \times 10^{-27} \ J[/tex]

Apply the principle of conservation of energy;

ΔK.E = ΔU

[tex]K.E_f -K.E_i = \Delta U\\\\initial \ velocity \ of \ the \ electron = 0\\\\K.E_f - 0 = \Delta U\\\\K.E_f = \Delta U\\\\\frac{1}{2} mv^2 = \Delta U\\\\where;\\\\m \ is \ the \ mass \ of\ the \ electron = 9.1 1 \times 10^{-31} \ kg\\\\v^2 = \frac{ 2 \Delta U}{m} \\\\v = \sqrt{\frac{ 2 \Delta U}{m}} \\\\v = \sqrt{\frac{ 2 (5.133\times 10^{-27})}{9.11\times 10^{-31}}}\\\\v = \sqrt{11268.935} \\\\v = 106.2 \ m/s[/tex]

Therefore, the  speed of the electron at the given position is 106.2 m/s

A parallel-plate capacitor consists of two plates, each with an area of 29 cm2cm2 separated by 3.0 mmmm. The charge on the capacitor is 7.8 nCnC . A proton is released from rest next to the positive plate. Part A How long does it take for the proton to reach the negative plate

Answers

Answer:

   t = 2.09 10⁻³ s

Explanation:

We must solve this problem in parts, first we look for the acceleration of the electron and then the time to travel the distance

let's start with Newton's second law

        ∑ F = m a

the force is electric

        F = q E

         

we substitute

        q E = m a

        a = [tex]\frac{q}{m} \ E[/tex]

        a = [tex]\frac{1.6 \ 10^{-19}}{ 9.1 \ 10^{-31} } \ 7.8 \ 10^{-9}[/tex]

        a = 1.37 10³ m / s²

now we can use kinematics

        x = v₀ t + ½ a t²

indicate that rest starts v₀ = 0

        x = 0 + ½ a t²

        t = [tex]\sqrt{\frac{2x}{a} }[/tex]

        t = [tex]\sqrt{\frac {2 \ 3 \ 10^{-3}}{ 1.37 \ 10^3} }[/tex]

        t = 2.09 10⁻³ s

Light of a given wavelength is used to illuminate the surface of a metal, however, no photoelectrons are emitted. In order to cause electrons to be ejected from the surface of this metal you should: ___________

a. use light of the same wavelength but increase its intensity.
b. use light of a shorter wavelength.
c. use light of the same wavelength but decrease its intensity.
d. use light of a longer wavelength.

Answers

Answer:

use light of the same wavelength but decrease it's intensity

For example, we can take Water
In (A) Water has same mass and great volume
In (B) Water has same mass and lower volume
Will there be any change in its density then?

Answers

Answer:

yes there will be change in its density

Rays of light coming from the sun (a very distant object) are near and parallel to the principal axis of a concave mirror. After reflecting from the mirror, where will the rays cross each other at a single point?
The rays __________
a. will not cross each other after reflecting from a concave mirror.
b. will cross at the center of curvature.
c. will cross at the point where the principal axis intersects the mirror.
d. will cross at the focal point. will cross at a point beyond the center of curvature.

Answers

A concave mirror is an example of curved mirrors. So that the appropriate answer to the given question is option D. The rays will cross at the focal point.

A concave mirror is a type of mirror in which its inner part is the reflecting surface, while its outer part is the back of the mirror.  This mirror reflects all parallel rays close to the principal axis to a point of convergence. It can also be referred to as the converging mirror.

In this type of mirror, all rays of light parallel to the principal axis of the mirror after reflection will cross at the focal point.

Therefore, the required answer to the given question is option D. i.e The rays will cross at the focal point.

For reference: https://brainly.com/question/20380620

Derive the dimension of coefficient of linear expansivity

Answers

Answer:

The SI unit of coefficient of linear expansion can be expressed as °C-1 or °K-1. ... The dimension of coefficient of linear expansion will be M0L0T0K−1.

Q1. A metal rod is of length 64.576 cm at a temperature 90°C whereas the same metal rod has a length of 64.522 cm at a temperature 12°C. Calculate the coefficient of linear expansion.

An ink-jet printer steers charged ink drops vertically. Each drop of ink has a mass of 10-11 kg, and a charge due to 500,000 extra electrons. It goes through two electrodes that gives a vertical acceleration of 104 m/s2. The deflecting electric field is _____ MV/m.

Answers

Answer:

  E = 1.25 MV / m

Explanation:

For this exercise let's use Newton's second law

          F = m a

where the force is electric

          F = q E

we substitute

          q E = m a

          E = m a / q

indicate there are 500,000 excess electrons

          q = 500000 e

          q = 500000 1.6 10⁻¹⁹

          q = 8 10⁻¹⁴ C

the mass is m = 10⁻¹¹ kg and the acceleration a = 10⁴ m / s²

         

let's calculate

          E = 10⁻¹¹ 10⁴ / 8 10⁻¹⁴

          E = 0.125 10⁷ V / m = 1.25 10⁶ V / m

          E = 1.25 MV / m

Do you believe in ghost​

Answers

Answer:

well its about our thinking but i do believe in ghost a little

In the diagram, the crest of the wave is show by:
A
B
C
D

Answers

Answer:

D.

Explanation:

The crest of a wave refers to the highest point of a wave. This is illustrated by D.

A large metal sphere has three times the diameter of a smaller sphere and carries three times the charge. Both spheres are isolated, so their surface charge densities are uniform. Compare (a) the potentials (relative to infinity) and (b) the electric field strengths at their surfaces.

Answers

Answer:

A. Equals to that of the smaller sphere

B. 3 times less than that of the smaller sphere

Explanation:

(a) Equals to that of the smaller sphere

The potential of an isolated metal sphere, with charge Q and radius R, is kQ=R, so a sphere with charge 3Q and radius 3R has the same potential

b) 3 times less than that of the smaller sphere

However, the electric field at the surface of the smaller sphere is ?=? 0 = kQ=R2 , so tripling Q and R reduces the surface field by a factor of 1/3

One charge is fixed q1 = 5 µC at the origin in a coordinate system, a second charge q2 = -3.2 µC the other is at a distance of x = 90 m from the origin.

What is the potential energy of this pair of charges?

Answers

Answer:

5.4uC

Explanation:

A cylinder is given a push and then rolls up an inclined plane. If the origin is the starting point, sketch the position, velocity, and acceleration of the cylinder vs. time as it goes up and then down the plane.

Answers

It will take a shorter amount of time for the cylinder to go down the plane down off the plane Because more pressure is applied one going up then going down there’s no pressure at all it’s the gravity is helping


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88

is the correct answer

A circular parallel-plate capacitor whose plates have a radius of 25 cm is being charged with a current of 1.3 A. What is the magnetic field 11 cm from the center of the plates

Answers

The magnetic field at 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.

Given;

radius of the circular plate, d = 25 cm = 0.25 m

current in the plate, I = 1.3 A

distance from the center of the circular plate, r = 11 cm = 0.11 m

To find:

magnetic field (B)

The magnetic field from the given distance is calculated as from Biot Savart equation:

[tex]B = \frac{\mu_o I}{2\pi r} \\\\where;\\\\\mu_o \ is \ permeability \ of \ free \ space \ 4\pi \times 10^{-7} \ T.m/A\\\\B = \frac{(4\pi \times 10^{-7} ) \times (1.3)}{2\pi \times 0.11} \\\\B = 2.364 \ \times 10^{-6} \ T[/tex]

Therefore, the magnetic field 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.

Learn more here: https://brainly.com/question/17035710

A object of mass 3.00 kg is subject to a force Fx that varies with position as in the figure below. A coordinate plane has a horizontal axis labeled x (m) and a vertical axis labeled Fx (N). There are three line segments. The first segment runs from the origin to (4,3). The second segment runs from (4,3) to (11,3). The third segment runs from (11,3) to (17,0). (a) Find the work done by the force on the object as it moves from x = 0 to x = 4.00 m. J (b) Find the work done by the force on the object as it moves from x = 4.00 m to x = 11.0 m. J (c) Find the work done by the force on the object as it moves from x = 11.0 m to x = 17.0 m. J (d) If the object has a speed of 0.450 m/s at x = 0, find its speed at x = 4.00 m and its speed at x = 17.0 m.

Answers

Answer:

Explanation:

An impulse results in a change of momentum.

The impulse is the product of a force and a distance. This will be represented by the area under the curve

a) W = ½(4.00)(3.00) = 6.00 J

b) W = (11.0 - 4.00)(3.00) = 21.0 J

c) W = ½(17.0 - 11.0)(3.00) = 9.00 J

d) ASSUMING the speed at x = 0 is in the direction of applied force

½(3.00)(v₄²) = ½(3.00)(0.450²) + 6.00

v₄ = 2.05 m/s

½(3.00)(v₁₇²) = ½(3.00)(0.450²) + 6.00 + 21.0 + 9.00

v₁₇ = 4.92 m/s

If the initial speed is NOT in the direction of applied force, the final speed will be slightly less in both cases.

potential diffetence​

Answers

Answer:

6v

Explanation:

V=IR

V= 2* 3

V= 6 volts

What is the volume of a metal block 3cm long by 2cm wide by 4cm high? What would be the volume of a block twice as long, wide, and high?

Answers

Answer:

Volume of a metal block = 24 cm^3

Volume of a block twice as long, wide and high = 192 cm^3

Explanation:

Volume of a block is measured in l*w*h and in the first block, the sides are 3, 2 and 4 and 3*2*4 = 24

Second block, just double each of the lengths to get 6*4*8 = 192

Other Questions
Decide whether each statement describes the Patricia class or the plebeian class and then drag it to the correct space? A child of divorce may exhibit which of the following behaviorsA. RelievedB. GuiltyC. DepressionD. All apply The length of a rectangular playing field is 5m longer than its width. If the perimeter of the field is 150m,find it's width Does the point (0, 0) satisfy the equation y = x2? Express 3.023 in P form where p and q are integers and q= 0 D How does the design demonstrate the ability to analyze, research, and explore a variety of information sources to adequately address how the target market might interpret a designmessage Enter the coordinates of the pointon the unit circle at the given angle. 0 Help,anyone can help me do quetion,I will mark brainlest. Find the slope, if it exists, of the line containing the points (10,-3) and (10,-8).Select the correct choice below and, if necessary, fill in the answer box to complete your choice.m= 20 POINTS AND BRAIN LIESTJ ulia s urveyed the pl ayers on her so ccer team to see how many hou rs each mem ber prac ticed during the week. Her data is shown in the histo gram.A histogram titled Prac tice Time has number of hours on the x -axis and number of players on the y-axis. 0.1 to 0.5 hours is 5 players, 0.6 to 1: 6, 1.1 to 1.5: 5, 1.6 to 2: 2, 2.1 to 2.5: 1, 2.6 to 3: 2, 3.1 to 3.5: 2, 3.6 to 4: 1, 4.1 to 4.5: 1.Which of the following best describes the histogram?The histogram is evenly distributed.The histogram is symmetrical. The left side of the histogram has a cluster.The left side of the histogram is the mirror image of the right side. 1/x^-2 x=7 yeet yeet enlightenment and the great awakening Read this excerpt of 'From Blossoms*:From laden boughs,from hands,from sweet fellowship in the bins,comes nectar at the roadside, succulentpeaches we devour, dusty skin and all,comes the familiar dust of summer, dust we eat.Which word helps create a positive mood? A. devour B. dust C. binsO D. sweet In a few sentences compare Tito and Gus. Tito and Gus are two kids in middle school living in a tough neighborhood. They just choose to act about it differently. Tell me how they are different, the things they do, how they act, choices they make, etc. In the context of talent development approaches, outdoor experiential activities as a development tool for individuals in teams _____. Alas! she is dead. (What word class does underline in the sentence belong to) 1. In 2020, the populations of City A and City B were equal. From 2015 to 2020, the population of City A increased by 20% and the population of City B decreased by 10%. If the population of City A was 120,000 in 2015, what is the population of City B in 2015?2. A chef is preparing a sauce for a steak she offers as a key dish in her menu. To prepare the sauce she needs to prepare a mix with 40% butter, with the rest being egg yolk. In the kitchen right now, she only has a sauce that has 20% butter (rest is egg yolk) and a sauce that has 50% butter (rest is egg yolk) in stock. In what ratio should she mix the 20% sauce with the 50% sauce in order to obtain the 40% sauce that she needs to prepare her famous recipe?3. A book was on sale for 30% off its original price. If the sale price of the book was $28, what was the original price of the book? (Assuming there is no sales tax)4. At a retail store, they needed to do surveys of 32 stores which equals 40% of all their stores. How many stores does the retailer have in total?* Find the surface area of this cylinder.Round to the nearest tenth.r = 3 cm3 cmSA = [ ? ] cm2PLEASE HELP En casa de herrero cuchillo de pollo What do safeguarding devices do to protect the worker?Select the 3 answer options that apply.Detects operator contact with the machine's point of operationPrevents operator contact with the machine's point of operation