The man does 480 J of work while loading the appliance across the ramp from bottom to top.
To solve this problem, we can use the equation for work:
Work = Force * Distance
We know that the force is equal to the weight of the appliance, which is 120 kg * 9.8 m/s² = 1176 N.
We also know that the distance is equal to the length of the ramp, which we can calculate using the Pythagorean theorem:
Length of ramp = √(4.0 m² + 4.0 m²) = 4.24 m
Plugging these values into the equation for work, we get:
Work = 1176 N * 4.24 m = 480 J
To know more about the Pythagorean theorem refer here :
https://brainly.com/question/14930619#
#SPJ11
Complete question :
A man loads 120kg appliance onto a truck across a ramp (sloped surface). The side opposite the ramps angle is 4.0 m in height. How much work does the man do while loading the appliance across the ramp from bottom to top
1. (a) In reaching equilibrium, how much heat transfer occurs from 1.1 kg of water at 40°C when it is placed in contact with 1.1 kg of 20°C water? Specific heat of water c=4186 J/(kg°C) Hint: If th
The heat transfer that occurs from 1.1 kg of water at 40°C to 1.1 kg of water at 20°C is 92,270 J.
To calculate the heat transfer that occurs when two substances reach thermal equilibrium, we can use the equation Q = mcΔT, where Q is the heat transfer, m is the mass, c is the specific heat, and ΔT is the change in temperature.
In this case, we have two equal masses of water, each weighing 1.1 kg. The specific heat of water, c, is given as 4186 J/(kg°C).
First, we need to calculate the change in temperature, ΔT, which is the difference between the final equilibrium temperature and the initial temperature. Since the masses are equal, the equilibrium temperature will be the average of the initial temperatures, which is (40°C + 20°C) / 2 = 30°C.
Next, we can calculate the heat transfer for each mass of water using the equation Q = mcΔT. For the water at 40°C, the heat transfer is Q₁ = (1.1 kg) * (4186 J/(kg°C)) * (30°C - 40°C) = -45,530 J (negative because heat is transferred out of the water). Similarly, for the water at 20°C, the heat transfer is Q₂ = (1.1 kg) * (4186 J/(kg°C)) * (30°C - 20°C) = 137,800 J.
The total heat transfer is the sum of the individual heat transfers: Q_total = Q₁ + Q₂ = -45,530 J + 137,800 J = 92,270 J.
Therefore, the heat transfer that occurs from 1.1 kg of water at 40°C to 1.1 kg of water at 20°C is 92,270 J.
To know more about thermal equilibrium refer here:
https://brainly.com/question/29419074#
#SPJ11
Complete Question:
(a) In reaching equilibrium, how much heat transfer occurs from 1.1 kg of water at 40€ when it is placed in contact with 1.1 kg of 20€ water? Specific heat of water c=4186 J/(kg) Hint: If the masses of water are equal, what is the equilirium temperature of the water mixture?
Consider a metal pipe that carries water to a house.Which answer best explains why a pipe like this may burst in very cold weather? O The metal contracts to a greater extent than the water. O The interior of the pipe contracts less than the outside of the pipe O Both the metal and the water expand,but the water expands to a greater extent. O Water expands upon freezing while the metal contracts at lower temperatures. O Water contracts upon freezing while the metal expands at lower temperatures
A metal pipe may burst in very cold weather because water expands upon freezing while the metal contracts at lower temperatures.
The reason a metal pipe may burst in very cold weather is due to the expansion of water upon freezing, combined with the contraction of the metal at lower temperatures.
When water freezes, it undergoes a phase change from a liquid to a solid state. Unlike most substances, water expands upon freezing. This expansion is due to the formation of ice crystals, which take up more space than the liquid water molecules. As the water inside the pipe freezes and expands, it exerts pressure on the surrounding walls of the pipe.
On the other hand, metals generally contract when they are exposed to colder temperatures. This contraction occurs because the colder temperature reduces the thermal energy of the metal atoms, causing them to move closer together.
When the water inside the pipe expands due to freezing, and the metal contracts due to the cold temperature, the combined effect can exert significant pressure on the pipe. This pressure may exceed the structural strength of the pipe, leading to bursting or cracking.
A metal pipe may burst in very cold weather because water expands upon freezing while the metal contracts at lower temperatures. This combination of expansion and contraction puts pressure on the pipe, potentially exceeding its structural strength. Understanding this behavior is crucial to prevent damage and ensure the proper functioning of pipes in cold weather conditions.
To know more about metal visit:
https://brainly.com/question/28183884
#SPJ11
what is the highest order dark fringe, , that is found in the diffraction pattern for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide?
The highest order dark fringe, n is approximately equal to 2 for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide.
The highest order dark fringe, n can be determined using the equation:
n λ = a sin θ
where,λ = 629 nma = 1480 nm
Given data:
wavelength (λ) = 629 nmsingle slit width (a) = 1480 nm
The highest order dark fringe, n can be determined using the equation:n λ = a sin θThe first dark fringe corresponds to n = 1, second dark fringe corresponds to n = 2, and so on.
For the highest order dark fringe, we need to find the largest value of n which gives a valid value of
sin θ.n λ = a sin θ ⇒ sin θ = (n λ) / a
For the highest order dark fringe, sin θ = 1 which gives:
n λ = a sin θ⇒ n λ = a⇒ n = a / λ
We have,a = 1480 nmλ = 629 nm
Substituting the values in the equation, we get:
n = a / λ= 1480 nm / 629 nm= 2.35 or 2 (approx)Therefore, the highest order dark fringe, n is approximately equal to 2
The highest order dark fringe, n is approximately equal to 2 for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide.
To know more about dark fringe, visit:
https://brainly.com/question/31576174
#SPJ11
A box with a mass of 25 kg rests on a horizontal surface. The coefficient of static friction between the box and the surface is 0.20. What horizontal force must be applied to the box for it to start s
To start the box sliding along the surface in the positive x direction, a horizontal force greater than 49 N in the positive x direction must be applied.
The maximum static friction force can be calculated using the equation:
f_static_max = μ_static * N
where μ_static is the coefficient of static friction and N is the normal force acting on the box. In this case, since the box is on a horizontal surface, the normal force is equal to the weight of the box:
N = m * g
Substituting the given values:
N = 25 kg * 9.8 m/s² = 245 N
Now, we can determine the maximum static friction force:
f_static_max = 0.20 * 245 N = 49 N
This is the maximum force that can be exerted before the box starts sliding. Therefore, to overcome the static friction and initiate sliding in the positive x direction, a horizontal force greater than 49 N in the positive x direction must be applied. The exact value of the force will depend on the magnitude of the static friction and the force applied.
To know more about static friction refer here:
https://brainly.com/question/30886698#
#SPJ11
Complete Question:
A box with a mass of 25 kg rests on a horizontal surface. The coefficient of static friction between the box and the surface is 0.20. What horizontal force must be applied to the box for it to start sliding along the surface in the positive x direction? Use g = 9.8 m/s². O A horizontal force greater than 49 N in the positive x direction. O A horizontal force equal to 49 N in the positive x direction. O A horizontal force less than 49 N in the positive x direction. O A horizontal force that is either equal to or greater than 49 N in the positive x direction. O None of the other answers
Magnetic Field on the Axis of a Circular Current Loop Problem Consider a circular loop of wire of radius R located in the yz plane and carrying a steady current I as in Figure 30.6. Calculate the magnetic field at an axial point P a distance x from the center of the loop. Strategy In this situation, note that any element as is perpendicular to f. Thus, for any element, ld5* xf| (ds)(1)sin 90° = ds. Furthermore, all length elements around the loop are at the same distancer from P, where r2 = x2 + R2. = Figure 30.6 The geometry for calculating the magnetic field at a point P lying on the axis of a current loop. By symmetry, the total field is along this axis,
The net magnetic field on the axis of the circular current loop is given by B=(μ0IR2/2)(x2+R2)-3/2 This is the required expression for the magnitude of the magnetic field on the axis of a circular current loop at a point P which is at a distance x from the center of the loop.
Magnetic field on the axis of a circular current loop at point P which is at a distance x from the center of the loop is calculated by the Biot-Savart law. The magnetic field is given by [tex]B=(μ0/4π)∫dl×r/r3[/tex] where r is the distance between the current element and the point P.
Magnetic field direction is perpendicular to the plane of the loop on the axis of the loop. Let us now find the expression for the magnitude of magnetic field on the axis of a circular current loop.
The geometry for calculating the magnetic field at a point P lying on the axis of a current loop
Let us take the Cartesian coordinate system such that the center of the circular loop is at the origin O. Then the position vector of the current element is [tex]r’=Rcosθi+Rsinθj[/tex] and the position vector of the point P is [tex]r=xk[/tex].
Then the vector r’-r is given by r’-[tex]r=Rcosθi+Rsinθj-xk[/tex]
=(Rcosθi+Rsinθj-xk)
Now the magnitude of this vector is [tex]|r’-r|=√[(Rcosθ-x)2+(Rsinθ)2][/tex]
Then, the magnetic field dB due to this current element is given by [tex]dB=μ0/4π dl/r2[/tex]
where dl=I(r’dθ) is the current element. Now the vector dB can be expressed in terms of its x, y and z components as follows:
[tex]dB=μ0/4π dl/r2[/tex]
=μ0/4π I(r’dθ)/r2 (Rcosθi+Rsinθj-xk)/[R2+ x2 -2xRcosθ+R2sin2θ]
Taking the x-component of dB we get
dB Bx=μ0I[Rcosθ(R2+x2)-xR2cos2θ-R2x]/[4π(R2+ x2 -2xRcosθ+R2sin2θ)3/2]
Integrating the x-component of dB from θ=0 to θ=2π
we get
[tex]Bx=∫dBBx[/tex]
=∫μ0I[Rcosθ(R2+x2)-xR2cos2θ-R2x]/[4π(R2+ x2
-2xRcosθ+R2sin2θ)3/2]dθ=0
Therefore, the net magnetic field on the axis of the circular current loop is given by [tex]B=(μ0IR2/2)(x2+R2)-3/2[/tex]
This is the required expression for the magnitude of the magnetic field on the axis of a circular current loop at a point P which is at a distance x from the center of the loop.
To learn more about Magnetic visit;
https://brainly.com/question/3617233
#SPJ11
the winding of an ac electric motor has an inductance of 21 mh and a resistance of 13 ω. the motor runs on a 60-hz rms voltage of 120 v.
a) what is the rms current that the motor draws, in amperes?
b) by what angle, in degrees, does the current lag the input voltage?
c) what is the capacitance, in microfarads, of the capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage?
The capacitance, in microfarads, of the capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage is 0.33 µF.
a) We have L = 21 mH, R = 13 ω and V = 120 V
The rms current that the motor draws, in amperes is calculated as follows:Irms = V/Z
Where, [tex]Irms = V/Z[/tex]
L = Inductance = 21 m
H = 21 × 10⁻³H
f = 60 Hz
R = Resistance = 13 Ω
V = RMS voltage = 120 V
Reactance, [tex]X = 2πfL[/tex]
= 2 × 3.1415 × 60 × 21 × 10⁻³
= 7.92 Ω
Thus, Z = sqrt(R² + X²)
= sqrt(13² + 7.92²)
= 15.22 Ω And,
[tex]Irms = V/Z[/tex]
= 120/15.22
= 7.89 A
Therefore, the rms current that the motor draws, in amperes is 7.89 A.
b) The current lags the voltage by a phase angle, ϕ. This can be calculated as follows:
[tex]tan ϕ = X/R[/tex]
= 7.92/13
= 0.609
Thus, the angle is,
ϕ = tan⁻¹0.609
= 30.67⁰
Therefore, by 30.67 degrees does the current lag the input voltage.
c) The capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage is given by,
[tex]C = 1/(2πfX)[/tex]
Where, f = 60 Hz
X = 7.92 Ω
C = 1/(2 × 3.1415 × 60 × 7.92 × 10⁰)
= 0.33 µF
Thus, the capacitance, in microfarads, of the capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage is 0.33 µF.
To learn more about capacitance visit;
https://brainly.com/question/18271076
#SPJ11
21.42 using cyclopentanone as your starting material and using any other reagents of your choice, propose an efficient synthesis for each of the following compounds
Cyclopentanone, C5H8O is a cyclic ketone and can be converted to various organic compounds with the help of different reagents. Thus, cyclopentanone can be used as a starting material to synthesize different organic compounds using various reagents and catalysts.
Here, efficient syntheses for three organic compounds using cyclopentanone as a starting material are given below:
1) 2-Methylcyclopentanone: It can be prepared by the reaction of cyclopentanone with isopropyl, magnesium bromide, followed by hydrolysis of the resulting product. This reaction is shown below:
2) Cyclopentylmethanol: It can be prepared by the reduction of cyclopentanone with sodium borohydride (NaBH4) in methanol. This reaction is shown below:
3) 2-Cyclopenten-1-one: It can be prepared by the dehydration of cyclopentanol, which can be prepared by the reduction of cyclopentanone with lithium aluminum hydride (LiAlH4). The dehydration of cyclopentanol can be carried out by the elimination of water molecule using an acid catalyst like H2SO4. The overall reaction is shown below.
to know more about cyclopentanone visit:
https://brainly.com/question/14919939
#SPJ11
A charge -5.5 nC is placed at (-3.1.-3) m and another charge 9.3 nC is placed at (-2,3,-2) m. What is the electric field at (1,0,0)m?
The electric field at (1,0,0) m due to the given charges is -1.2 x 10^5 N/C, directed towards the left.
Let's first calculate the electric field at point P due to the first charge:q1 = -5.5 nC, r1 = (-3.1, -3, 0) m and r = (1, 0, 0) m
The distance between charge 1 and point P is:r = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)r = √((1 - (-3.1))² + (0 - (-3))² + (0 - 0)²)r = √(4.1² + 3² + 0²)r = 5.068 m
Therefore, the electric field at point P due to charge 1 is:
E1 = kq1 / r1²E1 = (9 x 10^9 Nm²/C²) x (-5.5 x 10^-9 C) / (5.068 m)²E1 = -4.3 x 10^5 N/C (towards left, as the charge is negative)
Now, let's calculate the electric field at point P due to the second charge:
q2 = 9.3 nC, r2 = (-2, 3, -2) m and r = (1, 0, 0) m
The distance between charge 2 and point P is:
r = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)
r = √((1 - (-2))² + (0 - 3)² + (0 - (-2))²)
r = √(3² + 3² + 2²)r = √22 m
Therefore, the electric field at point P due to charge 2 is:
E2 = kq2 / r2²
E2 = (9 x 10^9 Nm²/C²) x (9.3 x 10^-9 C) / (√22 m)²
E2 = 3.1 x 10^5 N/C (towards right, as the charge is positive)
Now, the total electric field at point P due to both charges is:
E = E1 + E2
E = -4.3 x 10^5 N/C + 3.1 x 10^5 N/C
E = -1.2 x 10^5 N/C
Therefore, the electric field at (1,0,0) m due to the given charges is -1.2 x 10^5 N/C, directed towards the left.
Learn more about electric field at:
https://brainly.com/question/15906502
#SPJ11
The electric field at point P (1, 0, 0)m is (-2.42 × 10⁶) î + 6.91 × 10⁶ ĵ N/C.
The given charges are -5.5 nC and 9.3 nC. The position vectors of these charges are (-3.1, -3, 0)m and (-2, 3, -2)m. We need to find the electric field at (1, 0, 0)m.
Let's consider charge q1 (-5.5 nC) and charge q2 (9.3 nC) respectively with position vectors r1 and r2. Electric field due to q1 at point P (1,0,0)m is given by:r1 = (-3.1, -3, 0)mq1 = -5.5 nC
Position vector r from q1 to P = rP - r1 = (1, 0, 0)m - (-3.1, -3, 0)m = (4.1, 3, 0)m
Using the formula of electric field, the electric field due to q1 at point P will be given by:
E1 = kq1 / r²
where k is the Coulomb constantk = 9 × 10⁹ N m² C⁻²
Electric field due to q1 at point P isE1 = 9 × 10⁹ × (-5.5) / (4.1² + 3²) = -2.42 × 10⁶ N/C
Now, let's consider charge q2. The position vector of q2 is given by:r2 = (-2, 3, -2)mq2 = 9.3 nC
Position vector r from q2 to P = rP - r2 = (1, 0, 0)m - (-2, 3, -2)m = (3, -3, 2)m
Electric field due to q2 at point P will be given by:
E2 = kq2 / r²
Electric field due to q2 at point P is
E2 = 9 × 10⁹ × 9.3 / (3² + (-3)² + 2²) = 6.91 × 10⁶ N/C
Now, we can get the total electric field due to the given charges by adding the electric fields due to q1 and q2 vectorially.
The vector addition of electric fields E1 and E2 is given by the formula:
E = E1 + E2
Let's consider charge q1 (-5.5 nC) and charge q2 (9.3 nC) respectively with position vectors r1 and r2. Electric field due to q1 at point P (1,0,0)m is given by:r1 = (-3.1, -3, 0)mq1 = -5.5 nC
Position vector r from q1 to P = rP - r1 = (1, 0, 0)m - (-3.1, -3, 0)m = (4.1, 3, 0)m
Using the formula of electric field, the electric field due to q1 at point P will be given by:E1 = kq1 / r²
where k is the Coulomb constant
k = 9 × 10⁹ N m² C⁻²
The magnitude of the electric field due to q1 at point P is given by|E1| = 9 × 10⁹ × |q1| / r²= 9 × 10⁹ × 5.5 / (4.1² + 3²) N/C= 2.42 × 10⁶ N/C
The direction of the electric field due to q1 at point P is towards the charge q1.
Now, let's consider charge q2. The position vector of q2 is given by:r2 = (-2, 3, -2)mq2 = 9.3 nC
Position vector r from q2 to P = rP - r2 = (1, 0, 0)m - (-2, 3, -2)m = (3, -3, 2)m
The magnitude of the electric field due to q2 at point P will be given by:
E2 = kq2 / r²= 9 × 10⁹ × 9.3 / (3² + (-3)² + 2²) N/C= 6.91 × 10⁶ N/C
The direction of the electric field due to q2 at point P is away from the charge q2.
Now, we can get the total electric field due to the given charges by adding the electric fields due to q1 and q2 vectorially. The vector addition of electric fields E1 and E2 is given by the formula:E = E1 + E2E = (-2.42 × 10⁶) î + 6.91 × 10⁶ ĵ N/C
Learn more about electric field: https://brainly.com/question/30544719
#SPJ11
In your own words define the following term and state its
importance for hypothesis testing (2 points correct definition, 3
points correct importance for hypothesis testing).
Null Hypothesis
Sampling
Sampling is the process of selecting a subset of individuals or items from a larger population in order to gather information or make inferences about the whole population. This method allows researchers to collect data from a smaller group, which is more efficient and cost-effective than collecting data from the entire population.
Sampling is a crucial process in research because it helps ensure that the data collected is representative of the population and reduces the potential for bias. There are several types of sampling methods, including random sampling, stratified sampling, and convenience sampling. The choice of sampling method depends on the research question, the population being studied, and the resources available to the researcher. The accuracy of the data obtained from a sample depends on the sample size and the sampling method used. A larger sample size is generally more representative of the population and reduces the margin of error, while a smaller sample size may be more susceptible to sampling bias.
Know more about population, here:
https://brainly.com/question/15889243
#SPJ11
A 0.200-kg object is attached to a spring that has a force constant of 95.0 N/m. The object is pulled 7.00 cm to the right of equilibrium and released from rest to slide on a horizontal, frictionless table. Calculate the maximum speed Umas of the object. Upis m/y Find the location x of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up. m
The maximum speed of the object is Umas = 1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x = 6.97 cm..
To find the maximum speed of the object, we can use the concept of mechanical energy conservation. At the maximum speed, all the potential energy stored in the spring is converted into kinetic energy.
The potential energy stored in the spring is given by:
Potential energy (PE) = (1/2)kx²
Where:
k = force constant of the spring = 95.0 N/m
x = displacement of the object from equilibrium = 7.00 cm = 0.0700 m (converted to meters)
Substituting the values into the equation:
PE = (1/2)(95.0 N/m)(0.0700 m)²
PE ≈ 0.230 Joules
At the maximum speed, all the potential energy is converted into kinetic energy:
Kinetic energy (KE) = 0.230 Joules
The kinetic energy is given by:
KE = (1/2)mv²
Where:
m = mass of the object = 0.200 kg
v = maximum speed of the object (Umas)
Substituting the values into the equation:
0.230 Joules = (1/2)(0.200 kg)v²
v² = (0.230 Joules) * (2/0.200 kg)
v² = 2.30 Joules/kg
v ≈ 1.516 m/s
Therefore, the maximum speed of the object is Umas ≈ 1.516 m/s.
To find the location of the object relative to equilibrium when it has one-third of the maximum speed, we can use the concept of energy conservation again. At this point, the kinetic energy is one-third of the maximum kinetic energy.
KE = (1/2)mv²
(1/3)KE = (1/6)mv²
Substituting the values into the equation:
(1/3)(0.230 Joules) = (1/6)(0.200 kg)v²
0.077 Joules = (0.0333 kg)v²
v² = 2.311 Joules/kg
v ≈ 1.519 m/s
Now, we need to find the displacement x of the object from equilibrium at this velocity. We can use the formula for the potential energy stored in the spring:
PE = (1/2)kx²
Rearranging the equation:
x² = (2PE) / k
x² = (2 * 0.230 Joules) / 95.0 N/m
x² ≈ 0.004842 m²
x ≈ ±0.0697 m
Since the object is moving to the right, the displacement x will be positive:
x ≈ 0.0697 m
Converting this to centimeters:
x ≈ 6.97 cm
Therefore, the location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.
The maximum speed of the object is Umas ≈ 1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.
To know more about speed, visit:
https://brainly.com/question/30249508
#SPJ11
Question 1 Calculate the amount of radiation emitted by a blackbody with a temperature of 353 K. Round to the nearest whole number (e.g., no decimals) and input a number only, the next question asks a
The amount of radiation emitted by a blackbody with a temperature of 353 K is 961 {W/m}².
The formula for calculating the amount of radiation emitted by a blackbody is given by the Stefan-Boltzmann law: j^* = \sigma T^4 Where j* is the radiation energy density (in watts per square meter), σ is the Stefan-Boltzmann constant (σ = 5.67 x 10^-8 W/m^2K^4), and T is the absolute temperature in Kelvin (K).Using the given temperature of T = 353 K and the formula above, we can calculate the amount of radiation emitted by the blackbody: j^* = \sigma T^4 j^* = (5.67 \times 10^{-8}) (353)^4 j^* = 961.2 {W/m}².
Therefore, the amount of radiation emitted by the blackbody with a temperature of 353 K is approximately 961 watts per square meter (W/m²).Rounding this to the nearest whole number as specified in the question gives us the final answer of: 961 (no decimals).
More on radiation: https://brainly.com/question/31106159
#SPJ11
what is the best definition of relativistic thought according to perry
Relativistic thought refers to the recognition that our perceptions and beliefs are influenced by our experiences, upbringing, and cultural and social environments, according to Perry.
It suggests that reality is subjectively constructed rather than objectively discovered, and that what is "true" or "right" for one person or group may not be for another. Relativistic thinking entails a degree of tolerance for opposing viewpoints and a willingness to engage in dialogue rather than debate or dismiss opposing perspectives. Instead of seeing things in black and white, relativistic thought acknowledges the nuances and complexity of human experience and acknowledges that there may be multiple valid perspectives on any given issue.
To know more about degree of tolerance, visit:
https://brainly.com/question/32378860
#SPJ11
Relative to the ground, a car has a velocity of 17.3 m/s, directed due north. Relative to this car, a truck has a velocity of 23.0 m/s, directed 52.0° north of east. What is the magnitude of the truc
The
magnitude
of the truck's velocity
is approximately 22.783 m/s.
To solve this problem, we can break down the velocities into their x and y components.
The
car's velocity
is directed due north, so its
x-component is 0 m/s and its y-component is 17.3 m/s.
The truck's velocity is directed 52.0° north of east. To find its x and y components, we can use trigonometry. Let's define the
angle
measured counterclockwise from the positive x-axis.
The x-component of the truck's velocity can be found using the cosine function:
cos(52.0°) = adjacent / hypotenuse
cos(52.0°) = x-component / 23.0 m/s
Solving for the x-component:
x-component = 23.0 m/s * cos(52.0°)
x-component ≈ 14.832 m/s
The y-component of the truck's velocity can be found using the sine function:
sin(52.0°) = opposite / hypotenuse
sin(52.0°) = y-component / 23.0 m/s
Solving for the y-component:
y-component = 23.0 m/s * sin(52.0°)
y-component ≈ 17.284 m/s
Now, we can find the magnitude of the truck's velocity by using the
Pythagorean theorem
:
magnitude = √(x-component² + y-component²)
magnitude = √((14.832 m/s)² + (17.284 m/s)²)
magnitude ≈ √(220.01 + 298.436)
magnitude ≈ √518.446
magnitude ≈ 22.783 m/s
Therefore, the magnitude of the truck's
velocity
is approximately 22.783 m/s.
To know more about
magnitude
visit:
https://brainly.com/question/30337362
#SPJ11
A solid surface with dimensions 2.5 mm ✕ 3.0 mm is exposed to argon gas at 90. Pa and 500 K. How many collisions do the Ar atoms make with this surface in 20. s?v
A solid surface with dimensions 2.5 mm ✕ 3.0 mm is exposed to argon gas at 90. Pa and 500 K, the Ar atoms make 4.6128 collisions with the surface in 20 seconds.
We may utilise the idea of the kinetic theory of gases to determine how many collisions the Ar (argon) atoms have with the solid surface.
The expression for the quantity of surface collisions per unit of time is:
Collisions per unit time = (Number of particles per unit volume) × (Velocity) × (Area of the surface)
Number of particles per unit volume = (Pressure) / (Gas constant * Temperature)
Number of particles per unit volume = (Pressure) / (Gas constant * Temperature)
= (90) / (8.314 * 500 K)
= 0.02154 [tex]mol/m^3[/tex]
Number of particles in the given volume = (Number of particles per unit volume) × (Volume)
= (0.02154) × (7.5 × [tex]10^{(-6)[/tex])
= 1.6155 × [tex]10^{(-7)[/tex] mol (approximately)
Number of collisions = (Number of particles in the given volume) × (Collisions per unit time) × (Time)
= (1.6155 × [tex]10^{(-7)[/tex]) × (Number of particles per unit volume) × (Velocity) × (Area of the surface) × (Time)
Velocity = √((3 * k_B * T) / M_Ar)
Velocity = √((3 * 1.380649 × [tex]10^{(-23)[/tex] J/K * 500) / (39.95 × [tex]10^{(-3)[/tex] )
≈ 1,558.45 m/s
Number of collisions = (1.6155 × [tex]10^{(-7)[/tex]) × (0.02154) × (1,558.45 m/s) × (7.5 × [tex]10^{(-6)[/tex]) × (20)
≈ 4.6128 collisions
Therefore, the Ar atoms make approximately 4.6128 collisions with the surface in 20 seconds.
For more details regarding collisions, visit:
https://brainly.com/question/13138178
#SPJ4
please respond quickly
(a) Explain in your own words what is meant by active and passive sensors. Give an example of each type of sensor. [4 marks] (b) A thermometer is regarded as a first-order instrument where a time dela
(a) Active and passive sensors have a crucial role to play in the world of sensor technology. (b) A thermometer is regarded as a first-order instrument where a time delay is inherent, thereby making the device a passive sensor.
Active sensors transmit energy into the environment, then detect and measure the energy that reflects back. Passive sensors only detect incoming energy that is emitted from the environment. An example of an active sensor is radar, which transmits radio waves and listens for echoes back to detect the location of objects. An example of a passive sensor is a thermometer that reads the temperature without actively transmitting energy.
(b) A thermometer is regarded as a first-order instrument where a time delay is inherent, thereby making the device a passive sensor. A first-order instrument has a linear response, and it typically lacks precision. Passive sensors like thermometers rely on natural energy sources to measure temperature, such as the thermal energy emitted by an object. They only detect energy that comes to them and do not transmit energy like an active sensor would.
Detached sensors distinguish energy transmitted or reflected from an item, and incorporate various kinds of radiometers and spectrometers. The majority of passive systems utilized in remote sensing work in the microwave, visible, thermal infrared, and infrared regions of the electromagnetic spectrum.
Know more about passive sensors, here:
https://brainly.com/question/32616536
#SPJ11
please fast.
- 14. A 0.400 kg physics cart is moving with a velocity of 0.22 m/s. This cart collides inelastically with a second stationary cart and the two move off together with a velocity of 0.16 m/s. What was
In an inelastic collision, two or more objects stick together and travel as one unit after the collision. The principle of conservation of momentum states that the total momentum of a closed system remains constant if no external forces act on the system, which is also true for an inelastic collision.
As a result, the momentum of the first cart is equal to the combined momentum of the two carts after the collision, since the collision is inelastic. The velocity of the two carts after the collision can be calculated using the conservation of momentum, as follows:0.400 kg x 0.22 m/s + 0 kg x 0 m/s = (0.400 kg + 0 kg) x 0.16 m/s0.088 Ns = 0.064 NsThe total momentum of the system is 0.064 Ns.
The two carts move together after the collision with a velocity of 0.16 m/s. The mass of the second cart is 0 kg, therefore, its initial momentum is 0 Ns. The momentum of the first cart is therefore equal to the total momentum of the system.
The initial momentum of the first cart can be calculated using the following formula:p = mv0.088 Ns = 0.400 kg x v Therefore, the initial velocity of the first cart is:v = p/mv = 0.088 Ns / 0.400 kgv = 0.22 m/s Hence, the initial velocity of the first cart is 0.22 m/s.
To know more about inelastic collision refer here:
https://brainly.com/question/14521843#
#SPJ11
A 100.0 mL sample of 0.10 M NH3 is titrated with 0.10 M HNO3. Determine the pH of the solution after the addition of 50.0 mL of KOH. The Kb of NH3 is 1.8 x 10-5, A) 4.74 B) 7.78 C) 7.05 D) 9.26 E) 10.34
The pH of the solution after the addition of 50.0 mL of KOH is 9.26
So, the correct answer is D.
The limiting reactant is the one that will be completely consumed in the reaction. In this case, NH₃ is the limiting reactant because it is present in a greater amount than the HNO₃.
This means that all of the HNO₃ will react with NH₃ and there will be some NH₃ left over.
To find the amount of NH₃ that will react, use stoichiometry:
1 mol HNO₃ reacts with 1 mol NH₃ 0.0050 mol HNO₃ reacts with 0.0050 mol NH₃This means that 0.0100 mol - 0.0050 mol = 0.0050 mol of NH₃ remains after the reaction with HNO₃.
Now, find the concentration of NH₃ after the reaction:
0.0050 mol / 0.150 L = 0.033 M NH₃
Now, calculate the pOH of the solution:
pOH = -log(1.8 x 10⁻⁵) + log(0.033) = 4.74
Finally, calculate the pH of the solution:
pH = 14 - 4.74 = 9.26
Therefore, the answer is option D) 9.26.
Learn more about chemical reaction at:
https://brainly.com/question/30663464
#SPJ11
Option (c), The solution has a pH of 7.05. We are given the volume and the molarity of NH3 and HNO3 in the equation.
So, let's first calculate the moles of NH3 present in 100.0 mL of 0.10 M NH3.
The number of moles of NH3 in the solution will be: (100.0 mL / 1000 mL/L) × 0.10 M = 0.010 moles of NH3
Also, the number of moles of HNO3 in the solution will be the same because the two are reacted in a 1:1 ratio. Therefore, the number of moles of HNO3 in the solution will also be 0.010 mol. It is now time to calculate the concentration of the solution after the addition of 50.0 mL of 0.10 M KOH. Using the balanced chemical equation, KOH reacts with HNO3 in a 1:1 ratio as follows:
KOH(aq) + HNO3(aq) → KNO3(aq) + H2O(l)
Using the volume and molarity of KOH, we can calculate the number of moles of KOH in the solution as follows:(50.0 mL / 1000 mL/L) × 0.10 M = 0.0050 moles of KOH
Now we can determine the number of moles of HNO3 left in the solution by subtracting the number of moles of KOH from the original number of moles of HNO3:Number of moles of HNO3 = 0.010 - 0.0050 = 0.0050 mol
Finally, we can calculate the concentration of HNO3 in the solution using the new total volume of the solution. Since the total volume of the solution has doubled (from 100 mL to 200 mL), the molarity of the solution is halved:
Molarity of HNO3 = 0.0050 mol / 0.200 L = 0.025 M
The Kb value for NH3 is given in the question as 1.8 x 10-5. We can use this value and the concentration of NH3 to calculate the pKb as follows:
pKb = -log(Kb) = -log(1.8 x 10-5) = 4.74
The pH of the solution can now be calculated as follows:
pH = 14.00 - pOH = 14.00 - (pKb + log([NH3]/[NH4+])) = 14.00 - (4.74 + log(0.010/0.0050)) = 7.05
Therefore, the correct option is (C) 7.05.
Learn more about the molarity: https://brainly.com/question/2817451
#SPJ11
a lens has a refractive power of -1.50. what is its focal length?
It has been determined that the focal length of the lens is -0.6667 m.
Given: The refractive power of a lens is -1.50We are supposed to find the focal length of the given lens
Solution:The formula to find the focal length of a lens is given by:1/f = (n-1) (1/R1 - 1/R2)
Given: Refractive power (P) = -1.50
As we know that, P = 1/f (Where f is the focal length)
Hence, -1.50 = 1/fOr, f = -1/1.5= -0.6667 m
Therefore, the focal length of the given lens is -0.6667 m.
From the above calculations, it has been determined that the focal length of the lens is -0.6667 m.
To know more about focal length visit:
brainly.com/question/31755962
#SPJ11
the following appear on a physician's intake form. identify the level of measurement: (a) happiness on a scale of 0 to 10 (b) family history of illness (c) age (d) temperature
(a) The level of measurement for "happiness on a scale of 0 to 10" is an interval.
The happiness scale from 0 to 10 represents an interval measurement. The scale has equal intervals between the numbers, but it does not have a true zero point. The absence of happiness (0) does not indicate the complete absence of the attribute being measured. Therefore, it is an interval level of measurement.
(b) The level of measurement for "family history of illness" is nominal.
Family history of illness is a qualitative variable that represents categories or groups. It does not have a numerical order or magnitude. It is simply a classification of whether or not there is a family history of illness. Hence, it is a nominal level of measurement.
(c) The level of measurement for "age" is a ratio.
Age is a quantitative variable that has a meaningful zero point and a numerical order. Ratios between values are also meaningful. For example, someone who is 20 years old is half the age of someone who is 40 years old. Age satisfies all the properties of a ratio level of measurement.
(d) The level of measurement for "temperature" is an interval.
Temperature is a quantitative variable that can be measured on a scale such as Celsius or Fahrenheit. While temperature has equal intervals between the values, it does not have a true zero point (absolute absence of temperature). Therefore, it is an interval level of measurement.
To learn more about magnitude click here
https://brainly.com/question/29766788
#SPJ11
What value below has 3 significant digits? a) 4.524(5) kev b) 1.48(4) Mev c) 58 counts d) 69.420 lols Q13: What is the correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000? a) 40.897(8) counts/sec b) 40.90(12) counts/sec c) 41.0(5) counts/sec d) 41(5) counts/sec e) Infinite Q14: What kind of detectors have the risk of a wall effect? a) Neutron gas detectors b) All gas detectors c) Neutron semiconductor detectors d) Gamma semiconductor detectors e) Geiger-Müller counters
The value below that has 3 significant digits is: c) 58 counts
In this value, the digits "5" and "8" are considered significant, and the trailing zero does not contribute to the significant figures. The value "58" has two significant digits.
Q13: The correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000 is:
b) 40.90(12) counts/sec
The value has 4 significant digits, and the uncertainty is indicated by the value in parentheses. The uncertainty is determined by the count rate's precision and the dead time effect.
Q14: The detectors that have the risk of a wall effect are:
c) Neutron semiconductor detectors
d) Gamma semiconductor detectors
The wall effect refers to the phenomenon where radiation interactions occur near the surface of a detector, leading to reduced sensitivity and accuracy. In the case of neutron and gamma semiconductor detectors, their thin semiconductor material can cause a significant portion of radiation interactions to occur close to the detector surface, resulting in the wall effect.
To know more about digits, visit
https://brainly.com/question/24491627
#SPJ11
The displacement of a wave traveling in the negative y-direction
is D(y,t)=(9.0cm)sin(45y+70t+π)D(y,t)=(9.0cm)sin(45y+70t+π), where
y is in m and t is in s.
What is the frequency of this wave?
Wh
The displacement of a wave traveling in the negative y-direction depends on the amplitude and frequency of the wave.
The displacement of a wave traveling in the negative y-direction is a combination of factors. The first factor is the amplitude, which is the maximum distance that a particle moves from its rest position as a wave passes through it. The second factor is the frequency, which is the number of waves that pass a fixed point in a given amount of time. The displacement of a wave is given by the formula y = A sin(kx - ωt + ϕ), where A is the amplitude, k is the wave number, x is the position, ω is the angular frequency, t is the time, and ϕ is the phase constant. This formula shows that the displacement depends on the amplitude and frequency of the wave.
These variables have the same fundamental meaning for waves. In any case, it is useful to word the definitions in a more unambiguous manner that applies straightforwardly to waves: Amplitude is the distance between the wave's maximum displacement and its resting position. Frequency is the number of waves that pass by a particular point every second.
Know more about amplitude and frequency, here:
https://brainly.com/question/31863582
#SPJ11
why did the masses of the objects have to be very small to be able to get the objects very close to each other?
The masses of the objects have to be very small to be able to get the objects very close to each other because of the gravitational force.
Gravitational force is the force of attraction between any two objects with mass. It is an attractive force that acts between all objects with mass. The strength of the gravitational force depends on the masses of the objects involved and the distance between them. When the objects are close to each other, the gravitational force between them becomes stronger. If the masses of the objects are very large, the gravitational force between them becomes very strong. This means that it is very difficult to get the objects very close to each other because of the strong force of gravity. However, if the masses of the objects are very small, the gravitational force between them becomes very weak. This means that it is much easier to get the objects very close to each other because there is less gravitational force pushing them apart.
Gravitational force is one of the fundamental forces in nature. It is an attractive force that acts between any two objects with mass. The strength of the gravitational force depends on the masses of the objects involved and the distance between them. When the objects are close to each other, the gravitational force between them becomes stronger. If the masses of the objects are very large, the gravitational force between them becomes very strong. This means that it is very difficult to get the objects very close to each other because of the strong force of gravity. However, if the masses of the objects are very small, the gravitational force between them becomes very weak. This means that it is much easier to get the objects very close to each other because there is less gravitational force pushing them apart. In general, the strength of the gravitational force between two objects is given by the formula F = Gm1m2/r^2, where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them. As you can see from this formula, the strength of the gravitational force decreases as the distance between the objects increases.
To know more about gravitational force visit :-
https://brainly.com/question/32609171
#SPJ11
a child on a merry-go-round takes 4.4 s to go around once. what is his angular displacement during a 1.0 s time interval?
The child's angular displacement during a 1.0 s time interval is approximately 1.432 radians.
To determine the angular displacement of the child on the merry-go-round during a 1.0 s time interval, we can use the formula:
Angular Displacement (θ) = Angular Velocity (ω) × Time (t)
The angular velocity (ω) can be calculated by dividing the total angular displacement by the total time taken to complete one revolution.
In this case:
Time taken to go around once (T) = 4.4 s
Angular Velocity (ω) = 2π / T
Angular Velocity (ω) = 2π / 4.4 s ≈ 1.432 radians/s
Now, we can calculate the angular displacement during a 1.0 s time interval:
Angular Displacement (θ) = Angular Velocity (ω) × Time (t)
Angular Displacement (θ) = 1.432 radians/s × 1.0 s
Angular Displacement (θ) ≈ 1.432 radians
Learn more about angular displacement here:
https://brainly.com/question/31387317
#SPJ11
The angular displacement of the child during a 1.0 s time interval is 1.44 radian. The given values are, Time taken by the child to go around once, t = 4.4 s Time interval, t₁ = 1 s
Formula used: Angular displacement (θ) = (2π/t) × t₁. Substitute the given values in the formula, Angular displacement (θ) = (2π/t) × t₁= (2π/4.4) × 1= 1.44 radian. Thus, the angular displacement of the child during a 1.0 s time interval is 1.44 radian.
The change in the angular position of an object or a point in a rotational system is known as angular displacement and it measures the amount and direction of rotation from an initial position to a final position. Angular displacement is an important concept in physics and engineering, as it helps to describe a rotational motion.
To know more about angular displacement, refer
https://brainly.com/question/31150979
#SPJ11
Our Sun, a type G star, has a surface temperature of 5800 K. We know, therefore, that it is cooler than a type O star and hotter than a type M star Othersportta coos tracking id: ST-630-45-4466-38345. In accordance with Expert TA's Terms of Service copying this information t 50% Part (a) How many times hotter than our Sun is the hottest type O star, which has a surface temperature of about 40,000 K? Number of times hotter sin() cos() tan() asin() acos() B12 SOAL atan() acotan() sinh() cotanh() tanh) Degrees O Radians cotan() cosh() (1) 7 4 1 Hint 8 9 5 6 2 3 + 0 VO CONCE . CLEAK Submit I give up! Hints: 0% deduction per hint. Hints remaining: 1 Feedback: 1% deduction per feedback. 50% Part (b) How many times hotter is our Sun than the coolest type M star, which has a surface temperature of 2400 K?
(a) The hottest type O star is approximately 6.90 times hotter than our Sun.
(b) Our Sun is approximately 2.42 times hotter than the coolest type M star.
How many times hotter than our Sun is the hottest type O star with a surface temperature of about 40,000 K, and how many times hotter is our Sun than the coolest type M star with a surface temperature of 2400 K?Part (a) To determine how many times hotter the hottest type O star is compared to our Sun, we can calculate the temperature ratio as follows:
Temperature ratio = Temperature of the type O star / Temperature of our Sun
= 40,000 K / 5,800 K
≈ 6.90
Therefore, the hottest type O star is approximately 6.90 times hotter than our Sun.
Part (b) To determine how many times hotter our Sun is compared to the coolest type M star, we can calculate the temperature ratio as follows:
Temperature ratio = Temperature of our Sun / Temperature of the type M star
= 5,800 K / 2,400 K
≈ 2.42
Therefore, our Sun is approximately 2.42 times hotter than the coolest type M star.
Learn more about hottest type
brainly.com/question/30049280
#SPJ11
A 20.0-kg cannon ball is fired from a cannon with a muzzle speed of 100 m/s at an angle of 20.0° with the horizontal. Use the conservation of energy principle to find the maximum height reached by ba
A 20.0 kg cannonball is fired from a cannon with a muzzle speed of 100 m/s at an angle of 20.0°. Using conservation of energy, the maximum height reached by the cannonball is approximately 510.2 meters.
A cannon ball weighing 20.0 kg is launched from a cannon with an initial velocity of 100 m/s at an angle of 20.0° above the horizontal.
To determine the maximum height reached by the cannonball using the conservation of energy principle, we consider the conversion of kinetic energy into gravitational potential energy.
Initially, the cannonball has only kinetic energy, given by the equation KE = (1/2)mv², where m is the mass and v is the velocity.
At the highest point of its trajectory, the cannonball has no vertical velocity, meaning it has no kinetic energy but possesses gravitational potential energy, given by the equation PE = mgh, where h is the height and g is the acceleration due to gravity (approximately 9.8 m/s²).
Using the conservation of energy, we equate the initial kinetic energy to the maximum potential energy:
(1/2)mv² = mgh
Canceling the mass and rearranging the equation, we find:
v²/2g = h
Plugging in the given values, we have:
(100²)/(2*9.8) = h
Simplifying the equation, we find:
h ≈ 510.2 m
Therefore, the maximum height reached by the cannonball is approximately 510.2 meters.
To know more about maximum height refer here:
https://brainly.com/question/30878848#
#SPJ11
Water at 70 kPa and 100°C is compressed isentropically in a closed system to 4 MPa. Determine the final temperature of the water and the work required, in kJ/kg, for this compression. [Ans.: 664°C, 887.1 kJ/kg]
Final temperature of water is 664°C and work required for the compression process is 887.1 kJ/kg.
Given data:
Initial pressure P1 = 70 kPa
Initial temperature T1 = 100°C
Final pressure P2 = 4 MPa
Adiabatic or isentropic process, so heat transferred is zero, Q = 0
We need to determine the final temperature T2 and the work required for the compression process, W.
Adiabatic process is a process where there is no heat transfer, Q = 0. The energy balance equation for a closed system undergoing adiabatic or isentropic process can be written as:
dE = dQ - dW
Here, dE = Change in internal energy
dQ = Heat transferred (for adiabatic process, dQ = 0)
dW = Work done by the system
We can write the above equation in terms of specific quantities as: de = dq - dw
where, e = Internal energy per unit mass
q = Heat transferred per unit mass (for adiabatic process, q = 0)w = Work done per unit mass
We can use the entropy formula to determine the final temperature T2.S = constant
We can use the following equation for an adiabatic process:
S1 = S2
where S1 is the entropy of the water at P1 and T1 and S2 is the entropy of the water at P2 and T2.
S2 = S1 = constant
The entropy of the water can be calculated using the following equation:
s = Cp ln(T) - R ln(P)
where, s is the entropy per unit mass, Cp is the specific heat capacity at constant pressure, R is the gas constant, P is the pressure, and T is the temperature.
In our case, since the process is isentropic or adiabatic, the entropy change is zero.
Therefore, we can write:
S2 - S1 = 0Cp ln(T2) - R ln(P2) - Cp ln(T1) + R ln(P1) = 0Cp ln(T2/T1) - R ln(P2/P1) = 0Cp ln(T2/T1) = R ln(P1/P2)T2/T1 = (P1/P2)^(R/Cp)T2 = T1 * (P1/P2)^(R/Cp)
The specific heat capacity at constant pressure for water vapor can be taken as Cp = 1.872 kJ/kg K and the gas constant for water vapor is R = 0.4615 kJ/kg K.
The work done for an adiabatic process can be calculated using the following equation:
W = Cp * (T1 - T2)/(γ - 1)
where γ = Cp/Cv is the ratio of specific heats.
Cv for water vapor can be taken as 1.4 kJ/kg K.The specific work done per unit mass for the compression process can be calculated as:
W/m = W/m = Cp * (T1 - T2)/(γ - 1)We can substitute the given values in the above equations to obtain:
T2 = T1 * (P1/P2)^(R/Cp)T2 = 100 + 273.15 * (70 / 4000)^(0.4615/1.872) = 937.15
K = 664°CW/m = Cp * (T1 - T2)/(γ - 1)W/m = 1.872 * (100 + 273.15 - 937.15)/(1.4 - 1) = -887.1 kJ/kg
Work required for the compression process is 887.1 kJ/kg.
Final temperature of water is 664°C and work required for the compression process is 887.1 kJ/kg.
To know more about work, visit:
https://brainly.com/question/18094932
#SPJ11
if a dvd is spinning at 100 mph and has a radius of 14 inches, what is the linear speed of a point 3 inches from the center.
The linear speed of a point 3 inches from the center of a DVD spinning at 100 mph and with a radius of 14 inches is approximately 219.91 mph.
Linear speed is the rate at which an object moves along a circular path. It is measured in distance per unit time, such as miles per hour (mph) or meters per second (m/s).
The formula for linear speed is:
v = rω where:
v = linear speed
r = radius of the circle
rω = angular speed (measured in radians per second)
To calculate the linear speed of a point on a DVD spinning at 100 mph and with a radius of 14 inches, we need to convert the units of the given speed from mph to inches per second:
100 mph = (100 x 5280 feet) / 3600 seconds = 146.67 feet/second
146.67 feet/second = 1760 inches/second
Next, we need to find the angular speed ω of the DVD.
Angular speed is the rate at which an object rotates about an axis, and it is measured in radians per second. The formula for angular speed is:
ω = 2πf where:
ω = angular speed
f = frequency (measured in hertz)
π = 3.14159...
The frequency f of the DVD is equal to its rotational speed divided by the number of revolutions per second. One revolution is a complete turn around the circle, or 2π radians. Therefore, the frequency is:
f = (100 mph) / (2π x 14 inches x 3600 seconds/5280 feet) = 0.862 hertz
Finally, we can substitute the given values into the formula for linear speed:
v = rωv = (14 + 3) inches x 2π x 0.862 hertz = 219.91 inches/second
Therefore, the linear speed of a point 3 inches from the center of a DVD spinning at 100 mph and with a radius of 14 inches is approximately 219.91 mph.
Learn more about Linear speed https://brainly.com/question/29345009
#SPJ11
what hall voltage (in mv) is produced by a 0.160 t field applied across a 2.60 cm diameter aorta when blood velocity is 59.0 cm/s?
A 0.160 t field applied across a 2.60 cm diameter aorta when blood velocity is 59.0 cm/s will give Hall voltage of 2.3712 mV.
For calculating this, we know that:
VH = B * d * v * RH
In this instance, the blood flow rate is given as 59.0 cm/s, the magnetic field strength is given as 0.160 T, the aorta diameter is given as 2.60 cm (which we will convert to metres, thus d = 0.026 m), and the magnetic field strength is given as 0.160 T.
Let's assume a value of RH = [tex]3.0 * 10^{-10} m^3/C.[/tex]
VH = (0.160 T) * (0.026 m) * (0.59 m/s) * [tex]3.0 * 10^{-10} m^3/C.[/tex]
VH = 0.0023712 V
Or,
VH = 2.3712 mV
Thus, the Hall voltage produced in the aorta is approximately 2.3712 mV.
For more details regarding Hall voltage, visit:
https://brainly.com/question/32048582
#SPJ4
A capacitor is discharged through a 20.0 Ω resistor. The discharge current decreases to 22.0% of its initial value in 1.50 ms.
What is the time constant (in ms) of the RC circuit?
a) 0.33 ms
b) 0.67 ms
c) 1.50 ms
d) 3.75 ms
The time constant (in ms) of the RC circuit is 3.75 ms. Hence, the correct option is (d) 3.75 ms.
The rate of decay of the current in a charging capacitor is proportional to the current in the circuit at that time. Therefore, it takes longer for a larger current to decay than for a smaller current to decay in a charging capacitor.A capacitor is discharged through a 20.0 Ω resistor.
The discharge current decreases to 22.0% of its initial value in 1.50 ms. We can obtain the time constant of the RC circuit using the following formula:$$I=I_{o} e^{-t / \tau}$$Where, I = instantaneous current Io = initial current t = time constant R = resistance of the circuit C = capacitance of the circuit
To know more about circuit visit:-
https://brainly.com/question/12608516
#SPJ11
The time constant of the RC circuit is approximately 0.674 m s.
To determine the time constant (τ) of an RC circuit, we can use the formula:
τ = RC
Given that the discharge current decreases to 22.0% of its initial value in 1.50 m s, we can calculate the time constant as follows:
The percentage of the initial current remaining after time t is given by the equation:
I(t) =[tex]I_oe^{(-t/\tau)[/tex]
Where:
I(t) = current at time t
I₀ = initial current
e = Euler's number (approximately 2.71828)
t = time
τ = time constant
We are given that the discharge current decreases to 22.0% of its initial value. Therefore, we can set up the following equation:
0.22 =[tex]e^{(-1.50/\tau)[/tex]
To solve for τ, we can take the natural logarithm (ln) of both sides:
ln(0.22) = [tex]\frac{-1.50}{\tau}[/tex]
Rearranging the equation to solve for τ:
τ = [tex]\frac{-1.50 }{ ln(0.22)}[/tex]
Calculating this expression:
τ ≈ 0.674 m s
Learn more about time constant here:
brainly.com/question/32577767
#SPJ11
suppose the previous forecast was 30 units, actual demand was 50 units, and ∝ = 0.15; compute the new forecast using exponential smoothing.
By using the formula of exponential smoothing, we can get the new forecast. Hence, the new forecast using exponential smoothing is 33 units.
Given:
Previous forecast = 30 units
Actual demand = 50 unitsα = 0.15Formula used:
New forecast = α(actual demand) + (1 - α)(previous forecast)
New forecast = 0.15(50) + (1 - 0.15)(30)New forecast = 7.5 + 25.5
New forecast = 33 units
Therefore, the new forecast using exponential smoothing is 33 units.
In exponential smoothing, the new forecast is computed by using the actual demand and previous forecast. In this question, the previous forecast was 30 units and actual demand was 50 units, with α = 0.15. By using the formula of exponential smoothing, we can get the new forecast. Hence, the new forecast using exponential smoothing is 33 units.
To know more about New forecast visit:
brainly.com/question/31844712
#SPJ11
