A new element R shows chemical properties similar to the element sodium. What is the correct formula of a compound formed with R and sulfur?
R₂S
RS₂
RS
R₂S₂​

Answers

Answer 1

Answer:

R2S this is because sodium has one 1 valence and sulfur has valence of 2 so when they combine theyinterchange their valence


Related Questions

Trends in the periodic table indicate that the element with the greatest ionization energy is in which of the following periods and groups?

a
Period 2, Group 1
b
Period 7, Group 2
c
Period 6, Group 17
d
Period 1, Group 18

Answers

Answer:

D Period 1, Group 18

Explanation:

it's helium

it's top right corner of the periodic table

What is the Law of Octaves?

A. The rule used to compose a poem of eight lines
B. Law describing the special properties of elements within eight electrons in the outer shell.
C. Each note has a series of eight sub notes increasing in variation between it and the next notes.
D.When ordered by atomic mass every eight elements has similar properties

Answers

i believe the answer would be D. When ordered by atomics mass every eighth element has similar properties.

Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?

A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma

Answers

Answer:

For the wavelenth of light spectrum, I believe the order would be red visible light, infrared, microwaves and radio waves.

What is water cycle ?​

Answers

Answer:

is the water that passes through the carbon cycle of atmosphere

Nitrogen dioxide gas is dark brown in color and remains in equilibrium with dinitrogen tetroxide gas, which is colorless.

2NO2(g) ⇌ N2O4(g)

When a light brown colored mixture of the two gases at equilibrium was moved from room temperature to a higher temperature, the mixture turned dark brown in color.

Which of the following conclusions about this equilibrium mixture is true?

This reaction is exothermic because the system shifted to the left on heating.
This reaction is exothermic because the system shifted to the right on heating.
This reaction is endothermic because the system shifted to the left on heating.
This reaction is endothermic because the system shifted to the right on heating.

Answers

Answer:

This reaction is exothermic because the system shifted to the left on heating.

Explanation:

2NO₂ (g) ⇌ N₂O₄(g)

Reactant => NO₂ (dark brown in color)

Product => N₂O₄ (colorless)

From the question given above, we were told that when the reaction at equilibrium was moved from room temperature to a higher temperature, the mixture turned dark brown in color.

This simply means that the reaction does not like heat. Hence the reaction is exothermic reaction.

Also, we can see that when the temperature was increased, the reaction turned dark brown in color indicating that the increase in the temperature favors the backward reaction (i.e the equilibrium shift to the left) as NO₂ which is the reactant is dark brown in color. This again indicates that the reaction is exothermic because an increase in the temperature of an exothermic reaction will shift the equilibrium position to the left.

Therefore, we can conclude that:

The reaction is exothermic because the system shifted to the left on heating.

The reaction is exothermic and the equilibrium position shifted to the left hand side.

An exothermic reaction is one in which heat is given out. Hence, the equilibrium position moves towards the left when the temperature is increased in an exothermic reaction.

Given the reaction, 2NO2(g) ⇌ N2O4(g) the appearance of a dark brown gas at high temperature implies that the reaction is exothermic and the equilibrium position shifted to the left hand side.

Learn more about exothermic reaction: https://brainly.com/question/15308590

Which phrase best describes a Hawaiian eruption?
A. Slow-moving lava flows and explosions of pumice
B. Ash shooting high into the atmosphere
C. Fast-moving lava flows and explosions of cinder
D. Lava fountains and fissure eruptions

Answers

Answer:

C.faste-moving lava flows and explosion of cinder

classify each of the following solids as ionic,metallic, molecular, network (covalent)or amorphous?
1) Tetra phosphorous deicide(P4O10)
2)Graphite
3) Ammonium phosphate (NH4)3po4
4) Brass
5)SiC
6)Rb
7)l2
8)LiBr
9)P4
10) Plastic
11)Si​

Answers

Answer;

P4O10 - molecular solid

Graphite - network solid

Ammonium phosphate - ionic

Brass - metallic

SiC - network solid

Rb- metallic

I2 - molecular

LiBr- ionic

P4 - molecular

Plastic - amorphous

Si - network

Explanation:

An ioinc solid is made up of a pair of oppositely charged ion held together by electrostatic interaction between the bonding species.

A covalent solid is a solid in which the atoms involved in the solid are bonded together by covalent bonds. Covalent solids are also molecular.

Metals are held together by interaction of metal ions and a sea of electrons. This is called the metallic bond.

A network solid is composed of covalently bonded atoms that repeat itself in a definite manner. E.g SiC

which hybridization is found in CO2?​

Answers

The answer is The type of hybridization in CO2 is sp hybridization, and each carbon atom forms two sp hybrid orbitals. Out of two hybrid orbitals, one will be used to produce a bond with one oxygen atom, and the other will be used to produce a bond with another oxygen atom.

Hope this helps :)

HELP PLSSS WOOT WOOT

Answers

The answer is D Transform boundary

I need the answer to this asap!! please explain

Answers

Answer:

See explanation

Explanation:

Calcium carbide reacts with water to yield acetylene gas and calcium hydroxide as follows;

CaC2(s)+2H2O(g)⇋Ca(OH)2(s)+C2H2(g)

This now shows us that the equation as written in the question is wrong. Since the equation for the reaction of calcium carbide and water as shown in the question is wrong, the equation can not be balanced.

Someone plz help me here are the photos, I need the last one

Answers

Answer:

(6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol) - (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)

Explanation:

Question; From the given options, the chemical reaction in the question is presented as follows;

C₆H₁₂O₆(s) + 6O₂(g) → 6CO₂(g) + 6H₂O(l), given that we have;

[tex]\Delta \text H _f^{\circ}[/tex] for C₆H₁₂O₆ = -1,273.02 kJ/mol

[tex]\Delta \text H _f^{\circ}[/tex] for O₂(g) = 0 kJ/mol

[tex]\Delta \text H _f^{\circ}[/tex] for CO₂(g) = -393.5 kJ/mol

[tex]\Delta \text H _f^{\circ}[/tex] for H₂O(l) = -285.83 kJ/mol

The heat or enthalpy of a reaction,  is given as follows;

[tex]\Delta\text H_{rxn}^{\circ} = \sum \text n \cdot \Delta \text H _f^{\circ}(\text {products}) - \sum \text m \cdot \Delta \text H _f^{\circ}(\text {reactants} \text)[/tex]

Therefore, the equation which should be used to calculate [tex]\Delta\text H_{rxn}^{\circ}[/tex], is given as follows;

[tex]\sum \text n \cdot \Delta \text H _f^{\circ}(\text {products})[/tex] = (6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol)

[tex]\sum \text m \cdot \Delta \text H _f^{\circ}(\text {reactants} \text)[/tex] = (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)

Therefore;

[tex]\Delta\text H_{rxn}^{\circ}[/tex] = (6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol) - (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)

a que llamamos niveles y subniveles de energia?

Answers

Answer:

agua

Explanation:

por que estamos en la planeta


All light waves can be described in terms of their speed, frequency, and_____

Answers

I’m not really sure just trying to get points but maybe it’s length

What element has 9 electrons, and 11 neutrons?

Answers

fluorineelement has 9 electrons, and 11 neutrons

I need answers to question 1,2,3

Answers

Answer:

1. 0.125 mole

2. 42.5 g

3. 0.61 mole

Explanation:

1. Determination of the number of mole of NaOH.

Mass of NaOH = 5 g

Molar mass of NaOH = 23 + 16 + 1

= 40 g/mol

Mole of NaOH =?

Mole = mass /molar mass

Mole of NaOH = 5/40

Mole NaOH = 0.125 mole

2. Determination of the mass of NH₃.

Mole of NH₃ = 2.5 moles

Molar mass of NH₃ = 14 + (3×1)

= 14 + 3

= 17 g/mol

Mass of NH₃ =?

Mass = mole × molar mass

Mass of NH₃ = 2.5 × 17

Mass of NH₃ = 42.5 g

3. Determination of the number of mole of Ca(NO₃)₂.

Mass of Ca(NO₃)₂ = 100 g

Molar mass of Ca(NO₃)₂ = 40 + 2[14 + (3×16)]

= 40 + 2[14 + 48]

= 40 + 2[62]

= 40 + 124

= 164 g/mol

Mole of Ca(NO₃)₂ =?

Mole = mass /molar mass

Mole of Ca(NO₃)₂ = 100 / 164

Mole of Ca(NO₃)₂ = 0.61 mole

Which statement is not true about the periodic table?
A. Elements in the same family have the same number of protons.
B. An element of the table is represented by a box with a symbol in it.
C. Elements in the same period of the periodic table have the same
number of electron shells.
D. It is organized by atomic number.

Answers

Answer is A
All elements on the periodic table have a different number of protons that can be represented by its atomic number

Elements in the same family have the same number of protons. This  statement is not true about the periodic table. Therefore, option A is correct.

What is periodic table ?

The chemical elements are arranged in rows and columns in the periodic table, sometimes referred to as the periodic table of the elements. It is frequently used in physics, chemistry, and other sciences and is frequently regarded as a symbol of chemistry.

The table can be used by scientists to anticipate chemical reactions, study trends in the periodic properties of certain elements, and speculate on the properties of yet-to-be-discovered elements. The elements are arranged in the contemporary periodic table according to their atomic numbers and periodic characteristics.

The periodic table has changed to represent more than 150 years of chemical and physics research and development.

Thus, option A is correct.

To learn more about the periodic table, follow the link;

https://brainly.com/question/11155928

#SPJ2

The reaction from NaOH and CH3COOH gives
a. Basic Salt
b. Acidic Salt
c. Normal Salt
d. Neutral Salt​

Answers

Acidic acid will react with sodium hydrogen oxide and 80H to procedure of sodium acetate and water the imbalance chemical equation that describes this neutralization reaction

As a pure element the oxidation number of zinc is ________, but in compounds such as ZnCO3 its oxidation number is ________. Group of answer choices

Answers

Answer:

0, +2

Explanation:

As a pure element, any element or simple compound has an oxidation number of 0. This makes it a lot easier, and can be applied for almost any element or compound that uses one atom, like F2, O3, Zn, Fe, etc. However, in compounds, Zinc's oxidation number tends to be +2, and this is just a rule that I memorized when I learned this topic. Please let me know if you still need help and I hope you understood!

As a pure element, the oxidation number of zinc is zero, but in compounds such as  [tex]ZnCO_3\\[/tex] its oxidation number is +2.

What is the oxidation number?

Oxidation number also called oxidation state, is the total number of electrons that an atom either gains or loses in order to form a chemical bond with another atom.

As a pure element, any element or simple compound has an oxidation number of 0. This makes it a lot easier and can be applied for almost any element or compound that uses one atom, like [tex]F_2[/tex], [tex]O_3[/tex], Zn, Fe, etc.

However, in compounds, Zinc's oxidation number tends to be +2.

Learn more about the oxidation number here:

https://brainly.com/question/10079361

#SPJ2

What are the effects of acid precipitation in city centers

Answers

Answer:

Answer to the following question is as follows.

Explanation:

Acid rain causes harm to houses and buildings by dissolving stone or corroding metal exposed to the elements. Acid rain can degrade calcium carbonate or calcium-based chemicals found in some of these products.

The acidic particles damage metal and accelerate the deterioration of paint and stone. They also make buildings and other structures, like as monuments, filthy.

Which of the following elements is the largest in size?
A) O
B) He
C) K
ODH

Answers

Answer:

C) K

Explanation:

K has an electron configuration of 2.8.8.1

Help me please I really need this tomorrow

Answers

9.D

10.A

11.C

12.B

13.D

14.C

15.A

16.A

18.C

_______organisma consist of only one cell and _________ organisms consist of many cells​

Answers

Answer:

Unicellular organisms consist of only one cell and multicellular organisms consist of many cell.

Explanation:

Living things made up of a cell are called unicellular beings. They are very small and simple. In other words, unicellular organisms are those that are formed only by a single cell in which all the vital functions necessary for life are produced. For this reason, they are mostly microscopic organisms. Examples of unicellular organisms are viruses or bacteria.

Multicellular organisms are made up of a large number of cells. They present, therefore, a greater complexity than unicellular organisms in terms of the functions they develop. All current multicellular organisms come from a single cell, that is, they begin their life being unicellular. That is, they are formed from a zygote. Some examples of multicellular organisms are mammals, fungi, and mosses.

So, unicellular organisms consist of only one cell and multicellular organisms consist of many cell.

the representative particle for KBr is the?​

Answers

Answer:

This is a chemical symbol for Potassium Bromide

 Help ASAP only right answers only no spam don’t answer if you don’t know

















Answers

i know the answer is a theory

I believe it’s A.theory Im so sorry if it ain’t correct but I really think it is

At a temperature of -25 °C, a sample of gas in a rigid container exerts a pressure of 55.8 kPa. At what temperature will the pressure reach 145 kPa?

Answers

The required temperature of the gas sample is -64.96 °C.

What is ideal gas equation?

Ideal gas equation gives idea about the behavior of gas at different condition & represented as:

PV = nRT.

From the above equation it is clear that relation between temperature and pressure for this question is:

P₁/T₁ = P₂/T₂, where

P₁ & T₁ are the initial pressure and temperature.

P₂ & T₂ are the final pressure and temperature.

On putting values, we get

T₂ = (145)(-25) / (55.8) = -64.96 °C

Hence required temperature of the sample is -64.96 °C.

To know more about ideal gas equation, visit the below link:
https://brainly.com/question/1056445

#SPJ2

A 115.0-g sample of oxygen was produced by heating 400.0 g of potassium chlorate. 2KClO3 Right arrow. 2KCI 3O2 What is the percent yield of oxygen in this chemical reaction

Answers

Answer:

Percentage yield of O₂ = 73.4%

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2KClO₃ —> 2KCl + 3O₂

Next, we shall determine the mass of KClO₃ that decomposed and the mass of O₂ produced from the balanced equation. This can be obtained as follow:

Molar mass of KClO₃ = 39 + 35.5 + (3×16)

= 39 + 35.5 + 48

= 122.5 g/mol

Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mass of O₂ from the balanced equation = 3 × 32 = 96 g

SUMMARY:

From the balanced equation above,

245 g of KClO₃ decomposed to produce 96 g of O₂.

Next, we shall determine the theoretical yield of O₂. This can be obtained as follow:

From the balanced equation above,

245 g of KClO₃ decomposed to produce 96 g of O₂.

Therefore, 400 g 245 g of KClO₃ will decompose to produce

= (400 × 96)/245 = 156.7 g of O₂.

Thus, the theoretical yield of O₂ is 156.7 g

Finally, we shall determine the percentage yield of O₂. This can be obtained as follow:

Actual yield of O₂ = 115.0 g

Theoretical yield of O₂ = 156.7 g

Percentage yield of O₂ =?

Percentage yield = Actual yield /Theoretical × 100

Percentage yield = 115/156.7 × 100

Percentage yield = 11500/156.7

Percentage yield of O₂ = 73.4%

How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?

Answers

Hi there!

[tex]\large\boxed{3.203 * 10^{22} atoms}[/tex]

We can use the following conversions to solve:

Total mass --> amount of mols --> amount of atoms (Avogadro's number)

Begin by calculating the amount of boron trifluoride in 3.61 grams:

3.61 g * (1 mol BF₃ / 67.8 g) ≈ 0.0532 mol BF₃

Use avogadro's number to convert:

0.0532 mol * 6.02× 10²³atoms / 1 mol = 3.203 × 10²² atoms

The reversible reaction, 4HCl(g) + Si (s) ⇌ SiCl4 (l) + 2H2 (g) , would be classified as a ______________ reaction.


exothermic
endothermic
homogeneous
heterogeneous

Answers

Answer:

endothermic

Explanation:

endothermic reactions absorb heat from their surroundings, in this reaction the reactants are gas and solid and the products are liquid and gas, implying heat was absorbed to turn a solid to a liquid.

When triglycerides are metabolized, ___ is/are converted to pyruvate or glucose, whereas ____ is/are converted to acetyl CoA.

Answers

Answer:

Glycerol;Pyruvate

Explanation:

Metabolism of triglycerides occur through a process known as lipolysis. During triglyceride metabolism, Glycerol is converted to pyruvate or glucose through glycolysis or gluconeogenesis respectively. Glycerol enters these pathways by being converted to glycerol-3-phosphate (reaction catalyzed by glycerol kinase) which can in turn be converted to dihydroxyacetone phosphate (reaction catalyzed by glycerol-3-phosphate dehydrogenase).

NOTE: Dihydroxyacetone phosphate is a compound/substrate found in both glycolysis and gluconeogenesis.

The end product of glycolysis is pyruvate; this pyruvate, under aerobic condition is converted to acetyl coA (reaction catalyzed by pyruvate dehydrogenase complex), an intermediary of the Tricarboxylic acid cycle.

Stae the change in oxidation state of iron during the reactiong of iron extraction

Answers

Answer:

3

Explanation:

The reaction for the extraction of Iron is :-

2Fe2O3(s) + 3C(s) → 4Fe(l) + 3CO2(g)

O.S. of Fe in Fe2O3 is 3 and O.S. of Fe(l) is 0

change in oxidation state (O.S.) = higher O.S - lower O.S

= 3 - 0

= 3

Other Questions
Ethics Learning to recognize ethical issues is the most important step in understanding business ethics.a. Trueb. False In confirmatory visualization Group of answer choices Users expect to see a certain pattern in the data Users confirm the quality of data visualization Users don't know what they are looking for Users typically look for anomaly in the data write a function rule for the following data What are the functions of leaves? (Select all that apply.) PLEASE ANSWER ASAP AND GET 25 POINTSrelease water vaporabsorb water and nutrientsstore water and glucoseperform photosynthesis the series of specific steps you follow to achieve a goal is known as a(n) Accounts receivable, equipment, the building itself, and the land on which the building stands are examples of: Oxygen is a diatomic element.why give reason. Carl and Tulip are getting a divorce and wa In the context of working parents, a consistent finding is that in contrast to children whose mothers are not employed outside the home, children of working mothersnt to know how they can best communicate the news to their young children. Ellen Galinsky and Judy David would suggest that write a paragraph about yourself by using present tense What's a ruling family called? Drag the label to the correct location on the image including facts in an essay establishes fallacy, sets the time period, represents status, or gains credibility? In order to use moving averages to forecast a time series, the first step is to select the order k, the number of time series values to be included in the moving average.a) trueb) false El Espritu Santo da un conocimiento ms profundo del mensaje de_____ Sobre lo que hemos visto y en pocas palabras qu es lo que ms les llama la atencin? es de religin the flowers of the ____ bloom with sunrise and close with sunset. Which of the following is a like radical to cube rt of 7x The price elasticity of demand for a good is likely to be elastic __________. A. the budget share spent on the good. B. the number of close substitutes for the good. C. the available time during which consumers can adjust. D. all of the above. Shjdksjcksmcjcsnuckamc mt hnh vi c th ng thi l vi phm php lut hnh s va l vi phm php lut hnh chnh, nhng khng th ng thi va l vi phm php lut hnh s va l vi phm php lut dn s ng hay sai the id selector uses the id attribute of an html element to select a specific element give Example ?