Answer:
[tex]F = \frac{m {v}^{2} }{r} \\ = \frac{82 \times { (\frac{590 \times 1000}{3600} )}^{2} }{970} \\ = 2270.6 \: newtons[/tex]
Increasing the surfactant concentration above the critical micellar concentration
will result in: Select one:
1.An increase in surface tension
2. A decrease in surface tension
3. No change in surface tension
4.None of the above
Answer:
Explanation:no change in surface tension
An increase in the surfactant concentration above the critical micellar concentration will result in no change in surface tension.
In water-gas interface, surfactant reduces the surface tension of water by adsorbing at the liquid–gas interface.
Also, in oil-water interface, surfactant reduces the interfacial tension between oil and water by adsorbing at the oil-water interface.
The concentration of the surfactant can increase to a level called critical micellar concentration, which is an important characteristic of a surfactant.
As the concentration of the surfactant increases before critical micellar concentration, the surface tension changes strongly with an increase in the concentration of the surfactant. After reaching the critical micellar concentration, any further increase in the concentration will result in no change of the surface tension, that is the surface tension will be constant.Thus, increasing the surfactant concentration above the critical micellar concentration will result in no change in surface tension.
Learn more here: https://brainly.com/question/15785205
Wind is caused by ___. the earth's tilt the Coriolis effect temperature differences humidity
I am guessing wind is caused by climate change in the atmosphere
Explanation:
wind is cause by climate change in the atmosphere that depends weather is is breezy really cold or rain and cold
Answer:
caused by the uneven heating of the Earth by the sun and the own rotation.
A 0.0780 kg lemming runs off a
5.36 m high cliff at 4.84 m/s. What
is its kinetic energy (KE) when it
is 2.00 m above the ground?
Answer:
0.913
Explanation:
k.e=1/2mv square
k.e=1/2×0.078g×23.4256m/s square
k.e=0.913J
The kinetic energy when the lemming is 2.00 m above the ground is approximately 2.56 J (Joules).
To calculate the kinetic energy (KE) of the lemming when it is 2.00 m above the ground, we need to consider the change in its potential energy (PE) as it falls.
The potential energy at a height h is given by:
PE = m g h
Where:
m is the mass of the lemming (0.0780 kg)
g is the acceleration due to gravity (9.8 m/s²)
h is the height above the ground
Given:
Height of the cliff (h) = 5.36 m
Velocity of the lemming (v) = 4.84 m/s
Height above the ground (h') = 2.00 m
The lemming will lose potential energy as it falls from the cliff, which is converted into kinetic energy. Therefore, the kinetic energy when it is 2.00 m above the ground is equal to the difference between its total initial kinetic energy and the potential energy at that height.
Initial potential energy at the top of the cliff:
PE_initial = m g h
Potential energy when it is 2.00 m above the ground:
PE_final = m * g * h'
The change in potential energy is given by:
ΔPE = PE_final - PE_initial
The kinetic energy (KE) when it is 2.00 m above the ground:
KE = ΔPE = -ΔPE (due to energy conservation)
Let's calculate the potential energy at the top of the cliff and when it is 2.00 m above the ground:
PE_initial = m ×g × h
= 0.0780 kg × 9.8 m/s² × 5.36 m
PE_initial ≈ 4.09 J
PE_final = m ×g × h'
= 0.0780 kg ×9.8 m/s² ×2.00 m
PE_final ≈ 1.53 J
The change in potential energy (ΔPE) is:
ΔPE = PE_final - PE_initial = 1.53 J - 4.09 J
ΔPE ≈ -2.56 J
Since the change in potential energy is equal to the kinetic energy, the kinetic energy when the lemming is 2.00 m above the ground is approximately 2.56 J (Joules).
To know more about kinetic energy
https://brainly.com/question/999862
#SPJ2
can some one tell the answers
A helicopter is ascending vertically witha speed of 5.40 m/s. At a height of 105 m above the earth a package is dropped from the helicopter. How much time does is take for the package to reach the ground
Answer: 5.21 s
Explanation:
Given
Helicopter ascends vertically with [tex]u=5.4\ m/s[/tex]
Height of helicopter [tex]h=105\ m[/tex]
When the package leaves the helicopter, it will have the same vertical velocity
Using equation of motion
[tex]\Rightarrow h=ut+\dfrac{1}{2}at^2\\\\\Rightarrow 105=-5.4t+0.5\times 9.8t^2\\\Rightarrow 4.9t^2-5.4t-105=0\\\\\Rightarrow t=\dfrac{5.4\pm \sqrt{5.4^2+4\times 4.9\times 105}}{2\times 4.9}\\\\\Rightarrow t=\dfrac{5.4\pm 45.68}{9.8}\\\\\Rightarrow t=5.21\ s\quad \text{Neglect negative value}[/tex]
So, package will take 5.21 s to reach the ground
g you hang an object of mass m on a spring with spring constant k and find that it has a period of T. If you change the spring to one that has a spring constant of 2 k, the new period is
Answer:
a) T = 2π [tex]\sqrt{\frac{m}{k} }[/tex], b) T ’= [tex]\frac{1}{\sqrt{2} } T[/tex]
Explanation:
a) A system formed by a mass and a spring has a simple harmonic motion with angular velocity
w² = k / m
angular velocity and period are related
w = 2π /T
we substitute
4π²/ T² = k / m
T = 2π [tex]\sqrt{\frac{m}{k} }[/tex]
b) We change the spring for another with k ’= 2 k, let's find the period
T ’= 2π [tex]\sqrt{\frac{m}{k'} }[/tex]
T ’= 2π [tex]\sqrt{ \frac{m}{2k} }[/tex]
T ’= [tex]\frac{1}{\sqrt{2} } T[/tex]
A child throws a ball vertically upward to a friend on a balcony 28 m above him. The friend misses the ball on its upward flight but catches it as it is falling back to earth. If the friend catches the ball 3.0 s after it is thrown, at what time did it pass him on its upward flight
Answer:
[tex]t=1.9 sec[/tex]
Explanation:
From the question we are told that:
Height [tex]h=28m[/tex]
Time [tex]t=3s[/tex]
Generally the Newton's equation for Initial velocity upward is mathematically given by
[tex]s=ut+\frtac{1}{2}at^2[/tex]
[tex]28=3u-\frac{1}{2}*9.8*3^2[/tex]
[tex]u=24.03m/s[/tex]
Generally the velocity at elevation and depression occurs as ball arrives and passes through S=28
[tex]v=\sqrt{24.03-2*9.8*28}[/tex]
[tex]v=5.35m/s and -5.35m/s[/tex]
Generally the Newton's equation for time to reach initial velocity is mathematically given by
[tex]v=u+at[/tex]
[tex]5.35=24.03-9.8t[/tex]
[tex]t=\frac{28.03-5.35}{9.8}[/tex]
[tex]t=1.9 sec[/tex]
Water at 200 C has a bulk modulus of 2.2109 Pa, and the speed of sound in water at this temperature is 1480m/s. For 1000Hz sound waves in water at 200 C, what displacement amplitude is produced if the pressure amplitude is 310-2 Pa?
1000 grams of water is heated from 0 degree to 200 degree . The specific heat of water is 4186 j/kg.°C. Estimate the change in entropy of the water.
Answer:2
Explanation:
turn this scentence to repirted speach.
i ate icecream
She said that..........
Answer:
dhfhffuththt9tr8tujtngigjtjrjrjrurur
In the following circuit (Fig.3), calculate the intensity I through the resistance 3 using the principle of superposition.
Answer:
time
Explanation:
A police car in hot pursuit goes speeding past you. While the siren is approaching, the frequency of the sound you hear is 5500 Hz. When the siren is receding away from you, the frequency of the sound is 4500 Hz. Use the Doppler formula to determine the velocity of the police car. Use vsound=330 m/s.
What is the velocity v of the police car ?
When a police car in hot pursuit goes speeding past you, the velocity v of the police car is 33 m/s.
What is the Doppler formula?The formula is used when there exists a Doppler shift. The Doppler shift is due to the relative motion of sound waves between the source and observer.
The frequency increase by the Doppler effect is represented by the formula
f' = [tex]\dfrac{v-v_{o} }{v-v_{s} }[/tex]× f
Given the frequency of source f' is 5500 Hz . Velocity of the observer v₀ is 0.
Substituting the value into the equation will give us the velocity of the police car.
[tex]5500 = \dfrac{330}{330-v} \times f[/tex]...........(1)
When the car is receding, the frequency of the receiving signal f = 4500 Hz.
[tex]4500 = \dfrac{330}{330+v} \times f[/tex]..........(2)
Solving both equation, we get the velocity of a police car.
v = 33 m/s
Therefore, the velocity v of the police car is 33 m/s.
Learn more about Doppler equation.
https://brainly.com/question/15318474
#SPJ2
Por que nos dias de hoje o futebol é mais técnico, com mas estratégias e mais disputado?
Explanation:
[tex]which \: language \: is \: this[/tex]
[tex]pls \: write \: in \: english[/tex]
[tex]then \: only \: i \: can \: answer \: u[/tex]
[tex]otherwise \: sry[/tex]
Human vision cuts off on the red side of the spectrum at about 675 nm. What is the energy of a photon (in J) of this wavelength?
Answer:
The energy of a photon is 2.94x10⁻¹⁹ J.
Explanation:
The energy of the photon is given by:
[tex] E = \frac{hc}{\lambda} [/tex]
Where:
h: is Planck's constant = 6.62x10⁻³⁴ J.s
c: is the speed of light = 3.00x10⁸ m/s
λ: is the wavelength = 675 nm
Hence, the energy is:
[tex] E = \frac{hc}{\lambda} = \frac{6.62 \ccdot 10^{-34} J.s*3.00 \cdot 10^{8} m/s}{675 \cdot 10^{-9} m} = 2.94 \cdot 10^{-19} J [/tex]
Therefore, the energy of a photon is 2.94x10⁻¹⁹ J.
I hope it helps you!
A parallel-plate capacitor is connected to a battery of electric potential difference V. If the plate separation is decreased, do the following quantities increase, decrease, or remain the same: (a) the capacitor’s capacitance, (b) the potential difference across the capacitor, (c) the charge on the capacitor, (d) the energy stored by the capacitor, (e) the magnitude of the electric field between the plates, and (f ) the energy density of that electric field?
Answer:
a) increases.
b) remains the same.
c) increases.
d) increases.
e) increases.
f) increases.
Explanation:
a)
Since the capacitance of a parallel-plate depends only on geometric constants and the dielectric between the plates, we can use the following expression to asess the value of the capacitance:[tex]C = \epsilon_{0}*\frac{A}{d} (1)[/tex]
where ε₀ = permitivitty of free space
A = area of one of the plates
d= plate separation
As we can see, if the plate separation is decreased, the value of the capacitance must increase.b)
Per definition the capacitance explains the relationship between the charge on one of the conductors, and the potential difference between them, as follows:[tex]C = \frac{Q}{V} (2)[/tex]
Assuming that the capacitor remains connected to the battery when the plate separation is decreased, since the voltage can't change (as it must hold the same voltage than previously since it's directly connected to the battery) the potential difference between plates must remain the same.c)
From B, we know that V in (2) must remain constant. Since we know from (1) that C must increase, this means from (2) that Q must increase too.d)
The energy stored in the electric field between the plates can be expressed as follows in terms of the capacitance C and the potential difference V:[tex]U = \frac{1}{2}* C*V^{2} (3)[/tex]
From (1) in a) and from b) we know that the capacitance C must increase whilst V must remain the same, so U in (3) must increase also.e)
In the capacitor the magnitude of the Electric field between the plates is constant, and is related to the potential difference between them by the following linear relationship:[tex]V = E*d (4)[/tex]
Since we know that V must remain the same, if the distance d decreases, the electris field E must increase in the same ratio in order to keep the equation balanced.f)
The energy density of the electric field is defined as the energy stored between plates by unit volume, as follows:[tex]u = \frac{U}{v} = \frac{\frac{1}{2}* C*V^{2}}{A*d} =\frac{1}{2}* \epsilon_{0}*\frac{A*V^{2} }{A*d*d} = \frac{1}{2} *\epsilon_{0}*E^{2} (5)[/tex]
Since it's proportional to the square of the electric field, and we know from e) that the magnitude of the electric field must increase, u must increase too.A 1 500-kg car rounds an unbanked curve with a radius of 52 m at a speed of 12.0 m/s. What minimum coefficient of friction must exist between the road and tires to prevent the car from slipping
Explanation:
The centripetal force [tex]F_c[/tex] on the car must equal the frictional force f in order to avoid slipping off the road. Let's apply Newton's 2nd law to the y- and x-axes.
[tex]y:\:\:\:\:N - mg = 0[/tex]
[tex]x:\:\:F_c = f \Rightarrow \:\:\:m \dfrac{v^2}{r} = \mu N[/tex]
or
[tex]m \dfrac{v^2}{r} = \mu mg[/tex]
Solving for [tex]\mu[/tex],
[tex]\mu = \dfrac{v^2}{gr} = \dfrac{(12.0\:\frac{m}{s})^2}{(9.8\:\frac{m}{s^2})(52\:m)} = 0.28[/tex]
ou charge a piece of aluminum foil (mass = 4.99 g) by touching it to a charged rod. The charged rod gives the aluminum foil a charge of 13 µC. Your professor brings a charged plate over and tells you to put the aluminum foil on top of the plate. To your surprise the aluminum foil hovers motionless in the air above it! Calculate the value of the electric field from the charged plate (assume it is a uniform field and the aluminum foil is a point charge).
Answer:
The appropriate answer is "3761.69 N/C".
Explanation:
Given that:
Mass,
m = 4.99 g
or,
= [tex]4.99\times 10^{-3} \ kg[/tex]
Charge,
q = 13 µC
or,
= [tex]13\times 10^{-6} \ C[/tex]
As we know,
⇒ [tex]F=mg=Eq[/tex]
then,
⇒ [tex]E=\frac{mg}{q}[/tex]
By putting the values, we get
[tex]=\frac{4.99\times 10^{-3}\times 9.8}{13\times 10^{-6}}[/tex]
[tex]=3761.69 \ N/C[/tex]
20. Using the picture, how many neutrons does lithium have?
Answer:
No. of Neutrons = 3
Explanation:
The atomic number of Lithium is given as 3 in the symbol while the mass number is given as 5.941 which is approximately equal to 6.
Mass Number = No. of Protons + No. of Neutrons = 6
Atomic Number = Number of Electrons = No. of Protons = 3
Therefore,
Mass Number - Atomic Number = (No. of Protons + No. of Neutrons) - No. of Protons
Mass Number - Atomic Number = No. of Neutrons
No. of Neutrons = 6 - 3
No. of Neutrons = 3
Answer:
3
Explanation:
Honestly, it is the only one in the picture and as an answer.
A wave has angular velocity 12 rad/sec and maximum displacement X cm (X= last two digit [1] of your student’s ID). Calculate the maximum acceleration of the wave.
Answer:
[tex]a=1440\ m/s^2[/tex]
Explanation:
Given that,
The angular velocity of a wave, [tex]\omega=12\ rad/s[/tex]
The maximum displacement of the wave, A = 10 cm (let)
The maximum acceleration of the wave is given by :
[tex]a=-A\omega^2[/tex]
Put all the values,
[tex]a=10\times 12^2\\\\a=1440\ m/s^2[/tex]
So, the maximum acceleration of the wave is equal to [tex]1440\ m/s^2[/tex].
If the temperature of the conductor is increased, the electrons’ speeds decrease
Answer:
HOPE IT HELPS YOU!!!
Explanation:
Mark FadedGirl25 as brainliest
A train starts from rest and accelerates uniformly until it has traveled 5.6 km and acquired a forward velocity of The train then moves at a constant velocity of for 420 s. The train then slows down uniformly at until it is brought to a halt. The acceleration during the first 5.6 km of travel is closest to which of the following?
a. 0.19 m/s^2
b. 0.14 m/s^2
c. 0.16 m/s^2
d. 0.20 m/s^2
e. 0.17 m/s^2
Answer:
The acceleration during the first 5.6 km of travel is closest to 0.16 m/s²
Option c) 0.16 m/s² is the correct answer.
Explanation:
Given the data in the question;
since the train starts from rest,
Initial velocity; u = 0 m/s
final velocity; v = 42 m/s
distance covered S = 5.6 km = ( 5.6 × 1000 )m = 5600 m
acceleration a = ?
From the third equation of motion;
v² = u² + 2as
we substitute in our values
( 42 )² = ( 0 )² + [ 2 × a × 5600 ]
1764 = 0 + [ 11200 × a ]
1764 = 11200 × a
a = 1764 / 11200
a = 0.1575 ≈ 0.16 m/s² { two decimal place }
Therefore, The acceleration during the first 5.6 km of travel is closest to 0.16 m/s²
Option c) 0.16 m/s² is the correct answer.
what change occurs to the mass of an object when a unbalanced
Answer:
The mass decreases
Explanation:
Just smart
can anyone answer this fast pls
Q2/Deceleration of a particle is based on relation a=-3 v² m/s² where v in m/s. If it moves along a straight line and has velocity 10 m/s and position s = 8m when t=0, determine its velocity and position when t= 3 s. Where the velocity become zero. Discuss briefly.
Explanation:
Given: a = -3v^2
By definition, the acceleration is the time derivative of velocity v:
[tex]a = \frac{dv}{dt} = - 3 {v}^{2} [/tex]
Re-arranging the expression above, we get
[tex] \frac{dv}{ {v}^{2} } = - 3dt[/tex]
Integrating this expression, we get
[tex] \int \frac{dv}{ {v}^{2} } = \int {v}^{ - 2}dv = - 3\int dt[/tex]
[tex] - \frac{1}{v} = - 3t + k[/tex]
Since v = 10 when t = 0, that gives us k = -1/10. The expression for v can then be written as
[tex] - \frac{1}{v} = - 3t - \frac{1}{10} = - ( \frac{30 + 1}{10} )[/tex]
or
[tex]v = \frac{10}{30t +1 } [/tex]
We also know that
[tex]v = \frac{ds}{dt} [/tex]
or
[tex]ds = vdt = \frac{10 \: dt}{30t + 1} [/tex]
We can integrate this to get s:
[tex]s = \int v \: dt = \int ( \frac{10}{30t + 1}) \: dt = 10 \int \frac{dt}{30t + 1} [/tex]
Let u = 30t +1
du = 30dt
so
[tex] \int \frac{dt}{30t + 1} = \frac{1}{30} \int \frac{du}{u} = \frac{1}{30}\ln |u| + k[/tex]
[tex]= \frac{1}{30}\ln |30t + 1| + k[/tex]
So we can now write s as
[tex]s = \frac{1}{3}\ln |30t + 1| + k[/tex]
We know that when t = 0, s = 8 m, therefore k = 8 m.
[tex]s = \frac{1}{3}\ln |30t + 1| + 8[/tex]
Next, we need to find the position and velocity at t = 3 s. At t = 3 s,
[tex]v = \frac{10}{30(3) +1 } = \frac{10}{91}\frac{m}{s} = 0.11 \: \frac{m}{s} [/tex]
[tex]s = \frac{1}{3}\ln |30(3) + 1| + 8 = 9.5 \: m[/tex]
Note: velocity approaches zero as t --> [tex]\infty [/tex]
Your car breaks down in the middle of nowhere. A tow truck weighing 4000 lbs. comes along and agrees to tow your car, which weighs 2000 lbs., to the nearest town. The driver of the truck attaches his cable to your car at an angle of 20 degrees to horizontal. He tells you that his cable has a strength of 500 lbs. He plans to take 10 secs to tow your car at a constant acceleration from rest in a straight line along a flat road until he reaches the maximum speed of 45 m.p.h. Can the driver carry out the plan
Answer:
F = 1010 Lb
the tension on the cable is greater than its resistance, which is why the plan is not viable
Explanation:
For this exercise we can use the kinematic relations to find the acceleration and with Newton's second law find the force to which the cable is subjected.
v = v₀ + a t
how the car comes out of rest v₀ = 0
a = v / t
let's reduce to the english system
v = 45 mph (5280 ft / 1 mile) (1h / 3600) = 66 ft / s
let's calculate
a = 66/10
a = 6.6 ft / s²
now let's write Newton's second law
X axis
Fₓ = ma
with trigonometry
cos 20 = Fₓ / F
Fₓ = F cos 20
we substitute
F cos 20 = m a
F = m a / cos20
W = mg
F = [tex]\frac{W}{g} \ \frac{a}{cos 20}[/tex]
let's calculate
F = [tex]\frac{2000}{32} \ \frac{6.6 }{cos20}[/tex](2000/32) 6.6 / cos 20
F = 1010 Lb
Under these conditions, the tension on the cable is greater than its resistance, which is why the plan is not viable.
which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Answer:
d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Explanation:
The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.
So, in dc steady state, the voltage across a capacitor is constant and the current zero.
The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.
So, in dc steady state, the voltage across an inductor is zero and the current constant.
So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
The answer is d.
LC-circuit of the radio receiver consists of variable capacitor (Cmin= 1 pF, Cmax=10 pF) and inductor
with inductance 1 µH. Determine the wavelength range of this radio receiver.
Answer:
the radio can tune wavelengths between 1.88 and 5.97 m
Explanation:
The signal that can be received is the one that is in resonance as the impedance of the LC circuit.
X = X_c - X_L
X = 1 / wC - w L
at the point of resonance the two impedance are equal so their sum is zero
X_c = X_L
1 / wC = w L
w² = 1 / CL
w = [tex]\sqrt{\frac{1}{CL} }[/tex]
let's look for the extreme values
C = 1 10⁻¹² F
w = [tex]\sqrt{\frac{1}{ 1 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]
w = [tex]\sqrt{1 \ 10^{18}}[/tex]
w = 10⁹ rad / s
C = 10 10⁻¹² F
w = [tex]\sqrt{\frac{1}{10 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]Ra 1/10 10-12 1 10-6
w = [tex]\sqrt{0.1 \ 10^{18}}[/tex]Ra 0.1 1018
w = 0.316 10⁹ rad / s
Now the angular velocity and the frequency are related
w = 2π f
f = w / 2π
the light velocity is
c = λ f
λ = c / f
we substitute
λ = c 2π/w
we calculate the two values
C = 1 pF
λ₁ = 3 10⁸ 2π / 10⁹
λ₁= 18.849 10⁻¹ m
λ₁ = 1.88 m
C = 10 pF
λ₂ = 3 10⁸ 2π / 0.316 10⁹
λ₂ = 59.65 10⁻¹ m
λ₂ = 5.97 m
so the radio can tune wavelengths between 1.88 and 5.97 m
what is microeconomics
Answer:
Microeconomics is a part of economics and the study of decisions made by people and businesses regarding the allocation of resources, and prices at which they trade goods and services.
Microeconomics helps business planning i.e. helps the business community to plan their costs, production, etc. in anticipation of demand in order to maximize profits. Microeconomics is useful in explaining how market mechanism determines the price in a free market economy.
An 8.50 kg point mass and a 14.5 kg point mass are held in place 50.0 cm apart. A particle of mass (m) is released from a point between the two masses 12.0 cm from the 8.50 kg mass along the line connecting the two fixed masses.Find the magnitude of the acceleration of the particle.
Answer:
[tex]a=2.8*10^{-9}m/s[/tex]
Explanation:
From the question we are told that:
First Mass [tex]m=8.50kg[/tex]
2nd Mass [tex]m=14.5kg[/tex]
Distance
[tex]d_1=50=>0.50m\\\\d_2=>12cm=>0.12m[/tex]
Generally the Newtons equation for Gravitational force is mathematically given by
[tex]F_n=\frac{Gm_nm}{(r_n)^2}[/tex]
Therefore
Initial force on m
[tex]F_1=\frac{Gm_1m}{(r_1)^2}[/tex]
Final force on m
[tex]F_2=\frac{Gm_2m}{(r_2)^2}\\\\F=\frac{Gm_1m}{(r_1)^2}-\frac{Gm_2m}{(r_2)^2}[/tex]
Acceleration of m
[tex]a=\frac{F}{m}\\\\a=\frac{Gm_1}{r_1^2}-\frac{Gm_2}{r_2^2}[/tex]
[tex]a=6,67*10^{-11}{\frac{8.5}{0.12}}-\frac{14.5}{0.50}[/tex]
[tex]a=2.8*10^{-9}m/s[/tex]
An object with mass m = 0.56 kg is attached to a string of length r = 0.72 m and is rotating with an angular velocity ω = 1.155 rad/s. What is the centripetal force acting in the object?
Answer:
The centripetal force is 0.54 N.
Explanation:
mass, m = 0.56 kg
radius, r = 0.72 m
angular speed, w = 1.155 rad/s
The centripetal force is given by
[tex]F = m r w^2\\\\F =0.56\times 0.72\times 1.155\times 1.155\\\\F = 0.54 N[/tex]
