A police car in hot pursuit goes speeding past you. While the siren is approaching, the frequency of the sound you hear is 5500 Hz. When the siren is receding away from you, the frequency of the sound is 4500 Hz. Use the Doppler formula to determine the velocity of the police car. Use vsound=330 m/s.
What is the velocity v of the police car ?

Answers

Answer 1
Vs = 34m/s
I don’t have an explanation my apologies.
Answer 2

When a police car in hot pursuit goes speeding past you, the velocity v of the police car is 33 m/s.

What is the Doppler formula?

The formula is used when there exists a Doppler shift. The Doppler shift is due to the relative motion of sound waves between the source and observer.

The frequency increase by the Doppler effect is represented by the formula

f' = [tex]\dfrac{v-v_{o} }{v-v_{s} }[/tex]× f

Given the frequency of source f' is 5500 Hz . Velocity of the observer v₀  is 0.

Substituting the value into the equation will give us the velocity of the police car.

[tex]5500 = \dfrac{330}{330-v} \times f[/tex]...........(1)

When the car is receding, the frequency of the receiving signal f = 4500 Hz.

[tex]4500 = \dfrac{330}{330+v} \times f[/tex]..........(2)

Solving both equation, we get the velocity of a police car.

v = 33 m/s

Therefore, the velocity v of the police car is 33 m/s.

Learn more about Doppler equation.

https://brainly.com/question/15318474

#SPJ2


Related Questions

E=kq/r^2 chứng minh điện thế V=kq/r từ mối liên hệ giữa điện trường E và điện thế V

Answers

Answer:

hindi ko maintindihan teh

If the loading is 0.4, the coinsurance rate is 0.2, the number of units of medical care is 100, and the number of units of medical care is 1. What is the premium of this insurance?

Answers

Answer:

72  is the premimum of the insurance.

Explanation:

Below is the given values:

The loading = 0.4

Coinsurance rate = 0.2

Number of units = 100

Total number of units = 100 * 0.4 = 40

Remaining units = 60 * 0.2 = 12

Add the 60 and 12 values = 60 + 12 = 72

Thus, 72  is the premimum of the insurance.

plz answer the question

Answers

Answer:

Ray A = Incidence ray

Ray B = Reflected ray

Explanation:

From the law of reflection,

Normal: This is the line that makes an angle of 90° with the reflecting surface.

Ray A is the incidence ray: This is the ray that srikes the surface of a reflecting surface. The angle formed between the normal and the incidence ray is called the incidence angle

Ray B is the reflected ray: This is the ray leaves the surface of a reflecting surface. The angle formed between the reflected ray and the normal is called reflected angle

A digital signal differs from an analog signal because it a.consists of a current that changes smoothly. b. consists of a current that changes in pulses. c.carries information. d. is used in electronic devices.​

Answers

Answer:

d.it is used in electronic devices

A lens with a focal length of 15 cm is placed 45 cm in front of a lens with a focal length of 5.0 cm .

Required:
How far from the second lens is the final image of an object infinitely far from the first lens?

Answers

Answer:

the required distance is 6 cm

Explanation:

Given the data in the question;

f₁ = 15 cm

f₂ = 5.0 cm

d = 45 cm

Now, for first lens object distance s = ∝

1/f = 1/s + 1/s' ⇒ 1/5 = 1/∝ + 1/s'

Now, image distance of first lens s' = 15cm  

object distance of second lens s₂ will be;

s₂ = 45 - 15 = 30 cm

so

1/f₂ = 1/s₂ + 1/s'₂

1/5 = 1/30 + 1/s'₂

1/s'₂ = 1/5 - 1/30  

1/s'₂ = 1 / 6

s'₂ = 6 cm

Hence, the required distance is 6 cm

 

The distance of the final image from the first lens will be is 6 cm.

What is mirror equation?

The mirror equation expresses the quantitative connection between object distance (do), image distance (di), and focal length (fl).

The given data in the problem is;

f₁ is the focal length of lens 1= 15 cm

f₂ s the focal length of lens 2= 5.0 cm

d is the distance between the lenses = 45 cm

From the mirror equation;

[tex]\frac{1}{f} = \frac{1}{s} +\frac{1}{s'} \\\\ \frac{1}{5} = \frac{1}{\alpha} +\frac{1}{s'} \\\\[/tex]

If f₁ is the focal length of lens 1 is 15 cm then;

[tex]s'=15 cm[/tex]

f₂ s the focal length of lens 2= 5.0 cm

s₂ = 45 - 15 = 30 cm

From the mirror equation;

[tex]\frac{1}{f_2} = \frac{1}{s_1} +\frac{1}{s_2'} \\\\ \frac{1}{5} = \frac{1}{30} +\frac{1}{s_2'} \\\\ \frac{1}{s_2'}= \frac{1}{5} -\frac{1}{30} \\\\ \frac{1}{s_2'}= \frac{1}{6} \\\\ \rm s_2'= 6 cm[/tex]

Hence the distance of the final image from the first lens will be is 6 cm.

To learn more about the mirror equation refer to the link;

https://brainly.com/question/3229491

A ship is flying away from Earth at 0.9c (where c is the speed of light). A missile is fired that moves toward the Earth at a speed of 0.5c relative to the ship. How fast does the missile move relative to the Earth

Answers

Answer:

the required speed with which the missile move relative to the Earth is -0.727c

Explanation:

Given the data in the question;

relative velocity relation;

u' = u-v / 1 - [tex]\frac{uv}{c^2}[/tex]

so let V[tex]_B[/tex] represent the velocity as seen by an external reference frame; u=V[tex]_B[/tex]

and let V[tex]_A[/tex] represent the speed of the secondary reference frame; v=V[tex]_A[/tex]

hence, u' is the speed of B as seen by A

so

u' = V[tex]_B[/tex]-V[tex]_A[/tex] / 1 - [tex]\frac{V_BV_A}{c^2}[/tex]

now, given that; V[tex]_A[/tex] = 0.9c  and V[tex]_B[/tex]  = 0.5c

we substitute

u' = ( 0.5c - 0.9c ) / 1 - [tex]\frac{(0.5c)(0.9c)}{c^2}[/tex]

u' = ( 0.5c - 0.9c ) / 1 - [tex]\frac{c^2(0.5)(0.9)}{c^2}[/tex]

u' = ( 0.5c - 0.9c ) / 1 - (0.5 × 0.9)

u' = ( -0.4c ) / 1 - 0.45

u' = -0.4c / 0.55

u' = -0.727c

Therefore, the required speed with which the missile move relative to the Earth is -0.727c

What is 3*10^-6 divided by 2.5*10^6 expressed in standard notation?​

Answers

Answer:

1.2 x 10^-12

Explanation:

3/2.5 x 10^-6/10^6

1.2 x 10^-6 x 10^-6

1.2 x 10^-12

nariz (am
miria amy
0 = 0 +260 + (0)
U= 29 mb
6= ut +1 (04)
Car I was sitting at rest when it nous hit from
the rear by car 2 of identical mass. Both cant had
their heaks on and they stidled together Guy
in the original directioned of motion. If the stopping
force is notx (Combined weight of the cars), die
u=0 to find the approximate speed of car a just
before the collision took place on​

Answers

Answer:

33 mph

Explanation:

My best guess

A 2 kg object traveling at 5 m s on a frictionless horizontal surface collides head-on with and sticks to a 3 kg object initially at rest. Which of the following correctly identifies the change in total kinetic energy and the resulting speed of the objects after the collision? Kinetic Energy Speed
(A) Increases 2 m/s 3.2 m/s
(B) Increases Soold 2 m/s
(C) Decreases 3.2 m/s
(D) Decreases

Answers

Answer: (d)

Explanation:

Given

Mass of object [tex]m=2\ kg[/tex]

Speed of object [tex]u=5\ m/s[/tex]

Mass of object at rest [tex]M=3\ kg[/tex]

Suppose after collision, speed is v

conserving momentum

[tex]\Rightarrow mu+0=(m+M)v\\\\\Rightarrow v=\dfrac{2\times 5}{2+3}\\\\\Rightarrow v=2\ m/s[/tex]

Initial kinetic energy

[tex]k_1=\dfrac{1}{2}\times 2\times 5^2\\\\k_1=25\ J[/tex]

Final kinetic energy

[tex]k_2=\dfrac{1}{2}\times (2+3)\times 2^2\\\\k_2=10\ J[/tex]

So, it is clear there is decrease in kinetic energy . Thus, energy decreases and velocity becomes 2 m/s.

Give the missing ammeter reading a and b. suggest why more current flow through some bulbs than through others Grade 10 question and Answer

Answers

Answer:

becaude of electricity

A scenario where reaction time is important is when driving on the highway. During the delay between seeing an obstacle and reacting to avoid it (or to slam on the brakes!) you are still moving at full highway speed. Calculate how much distance you cover in meters before you start to put your foot on the brakes if you are travelling 65 miles per hour.

Answers

Answer:

66.83 meters

Explanation:

After a quick online search, it seems that scientists calculate the average reaction time of individuals as 2.3 seconds between seeing an obstacle and putting their foot on the brakes. Now that we have this reaction time we need to turn the miles/hour into meters/second.

1 mile = 1609.34 meters  (multiply these meters by 65)

65 miles = 104,607 meters

1 hour = 3600 seconds

Therefore the car was going 104,607 meters every 3600 seconds. Let's divide these to find the meters per second.

[tex]\frac{104,607}{3600} = \frac{29.0575 meters}{1 second}[/tex]

Now we simply multiply these meters by 2.3 seconds to find out the distance covered before the driver puts his/her foot on the brakes...

29.0575m * 2.3s = 66.83 meters

If 1.02 ✕ 1020 electrons move through a pocket calculator during a full day's operation, how many coulombs of charge moved through it?

Answers

Answer:

Explanation:

one electron has [tex]1.60217662*10^{-19}~coulombs~then\\\\1.02*10^{20}~electrons------->1.02*10^{20}*1.60217662*10^{-19}~coulombs= 16.3422~coulombs[/tex]

why material selection is important to design and manufacturing?​

Answers

Answer:

. You want your product to be as strong and as long lasting as possible. There are also the safety implications to consider. You see, dangerous failures arising from poor material selection are still an all too common occurrence in many industries. yep that the answer have a Great day

Explanation:

(◕ᴗ◕✿)

A strong trough in a Rossby wave occurs when the jet stream A. bends towards the Equator. B. bends toward the poles. C. does not bend but maintains an east to west flow. D. does not bend but maintains a west to east flow.

Answers

Answer:

A. bends towards the Equator.

Explanation:

Rossby waves are inertial waves that are naturally occurring in a rotating fluids. These waves are also called as the planetary waves.

The Rossby waves are undulated that occur in the polar front jet stream when there is a significant differences in the temperatures between the polar and the tropical air masses.

It occurs when the polar air masses moves towards the equator and when the tropical air masses moves towards the pole.  It is formed when the air bends away from the poles and bends towards the equator.

Hence the correct option is (A).

what is the frequency of a wave related to​

Answers

Answer:

Frequency is the number of complete oscillations or cycles or revolutions made in one second.

which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Answers

Answer:

d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Explanation:

The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.

So, in dc steady state, the voltage across a capacitor is constant and the current zero.

The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.

So, in dc steady state, the voltage across an inductor is zero and the current constant.

So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

The answer is d.

Pete is investigating the solubility of salt (NaCl) in water. He begins to add 50 grams of salt to 100 grams of
room temperature tap water in a beaker. After adding all of the salt and stirring for several minutes, Pete
notices a solid substance in the bottom of the beaker. Which statement best explains why there is a solid
substance in the bottom of the beaker?
A. The salt he is using is not soluble in water.
B. The salt is changing into a new substance that is not soluble in water,
C. The dissolving salt is causing impurities in the water to precipitate to the bottom
D. The water is saturated and the remaining salt precipitates to the bottom

Answers

Answer:

would the answer be c

Explanation: that what i think in my opian

Answer:

A

Explanation:

help asap PLEASE I will give u max everything all that

steps if possible

Answers

Explanation:

2. [tex]R_T = R_1 + R_2 + R_3 = 625\:Ω + 330\:Ω + 1500\:Ω[/tex]

[tex]\:\:\:\:\:\:\:= 2455\:Ω = 2.455\:kΩ[/tex]

3. Resistors in series only need to be added together so

[tex]R_T = 8(140\:Ω) = 1120\:Ω = 1.12\:kΩ[/tex]

Which of the following elements has the largest atomic radius?
Silicon
Aluminum
Sulfur
Phosphorous

Answers

aluminum has the largest atomic radius

Answer:

francium

Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.

Other Questions
In 2008, the Los Angeles Times asked members of the American public whether free international trade has helped or hurt the economy. Of those surveyed, a.16 percent said free international trade hurt the economy. b.26 percent said free international trade helped the economy. c.57 percent said free international trade helped the economy. d.30 percent said free international trade hurt the economy. A ship is flying away from Earth at 0.9c (where c is the speed of light). A missile is fired that moves toward the Earth at a speed of 0.5c relative to the ship. How fast does the missile move relative to the Earth Find the co-ordinates of the points where the line represented by the linear equationy = 2x -4 intersects x-axis and y-axis. During a storm, heavy rain ___________ a large rock into smaller pieces and then those pieces are __________ downstream from one place to another. *erodes / weatherdeposits / erodedweathered / erodeddischarges / deposits Which of the following is the function f(x) if f^-1(x) = 5x - 19?A. f(x) = x - 19 over 5 B. f(x) = x + 19 over 5 C. f(x) = 5x + 19 D. f(x) = x over 5 + 19 What was the USSR in control of after WW2? Please Help!!! Why do you think people feared the black nationalism movement? Name 3 characteristics of R&B Length of radius r ? The graph represents the piecewise function:f(x)= { __, if -1 x 1; __, if 3 x 5 } hi i need help with this algebra vocabulary please plz help me with this Dan, Harry and Regan sell cars.Dan sells x cars.Harry sells 5 more cars than Dan.Regan sells twice as many cars as Dan.Write an expression, in terms of x, for the mean number of cars Dan, Harry and Regan sell. Solve 2x + 6 > 20. OLA X> 18 B. X>7 O c. xsomeone help por favor Can anybody help?? If somebody can answer I'd love it!! Explain what Lester thinks the duty of a witness is What percentage of ozone is contained in the stratosphere? a. 10% b. 50% C. 80% d. 90% Please select the best answer from the choices provided find the height x of the tree (write and solve an algebraic equation to find the measure of each angle based on the given description.)***11. Two angles form a linear pair. The measure of one angle is 24 more than themeasure of the other angle. What is 3*10^-6 divided by 2.5*10^6 expressed in standard notation?