Answer: b
Explanation:
When heat is released by the system i.e. system loses heat. So, we take it as negative -Q
When the work is done on the system then it is considered as negative work on the system i.e. -W
In this case, the plunger is pulled out, and work is done on the system. So, we take work as negative work -W
Correct option is b
The answer is D.
-Q +W
Why does a concave lense always form a virtual image?
Answer:
Concave lens spreads out light rays that are then refracted through it.: A concave mirror or a converging lens will only produce a virtual image at a point if the image is located beyond the focal point. By the focal point, we define the point that is more than one focal length away.
dew forms when humid air cools overnight. if the temperature falls below freezing, blank will form instead
A 445-N force is used to hold up a Papa Johns sign in place. What is the mass of the sign?
Answer:
The mass of the sign is 44.5 kg.
Explanation:
Given that,
Force acting on the sign, F = 445 N
We need to find the mass of the sign.
Net force acting on it is given by :
F = mg
Where g is the acceleration due to gravity
[tex]m=\dfrac{F}{g}\\\\m=\dfrac{445\ N}{10\ m/s^2}\\\\m=44.5\ kg[/tex]
So, the mass of the sign is 44.5 kg.
At the time of the founding of the country, most Americans worked as
A.shopkeepers
B.soldiers
C.ship builders
D.farm workers
Answer:
Farmers
Explanation:
At the time of founding our country most soldiers in the revolutionary war were farmers who were inexperienced.
Answer:
D. farm workers
Explanation:
It is because when they started founding the country, people needed food and everything was based on agriculture and economy, and the main economy wat cotton and tobacco.
Question 1 of 10
Which option is a potential environmental benefit of adopting a new
technology?
A. Expanded customer base
B. Improved product quality
C. Higher numbers of sales
D. Reduced emission of pollutants
SUBMIT
Answer:
Its obviously number D
Explanation:
When it comes to environmental benefit, Reducing emission of pollutants does the best job.
Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.
What are pollutants?The elements, molecules, and particles that contribute to pollution are known as pollutants; life can be injured by exposure to these substances, and their impacts on people and plants are widely documented.
There are several ways that pollutants can enter the environment, both naturally and through human activity.
Depending on the type of pollution, what happens to it once it is released into the air, soil, or water supply.
Therefore, Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.
To learn more about pollutants, refer to the link:
https://brainly.com/question/28519286
#SPJ2
Have you ever noticed that how much electrical energy is consumed by electrical appliances in your home. Make a chart of all of these appliances with their power in kW and an average use on daily, weekly, and monthly basis. Usually the electrical power is written on most of the appliances or on their packing. Calculate the total consumption of electrical energy in kWh in your home for December, 2020. Find the expected electricity bill for this month, if 1 kWh energy costs Rs 10. Which item consumed most energy during the month
Answer:
A. The expected electricity bill for this month is Rs 18,896.2
B. The item which consumed the most energy during the month is the electric cooker with a total consumption of 1,110Kw/Month
Explanation:
Step 1 - Identify electrical appliances
I only have 8 electrical appliances in my home.
Electric Cooker. Its power rating 3000 Watts (that is 3Kw/h)Refrigerator. Its power rating is 150 Watts (that is 0.15Kw/h)Waterheater. Its power rating is 4000 Watts (that is 4Kw/h)Electric Iron. Its power rating is 1000 Watts (that is 1Kw/h)Led TV. Its power rating is 235 watts (that is 0.235Kw/h)13 Energy-saving Light bulbs at 60 watts which is a total of 780 watts (which is 0.78Kw)Electric Standing Fan. Its power rating is 55 watts (that is 0.055Kw)Washing machine. Its power rating 255 watts (that is 0.255Kw)Step 2 - Assign usage per hour and calculate wattage used /month
The Electric Cooker is used an average of 9 hours/day. This is 270hours/month. Total Kw used per month 3Kw * 270hours = 1,110Kw/MonthThe refrigerator is used 24 hours. That is 0.15Kw *24*30days= 108Kw/MonthThe water heater is used 1 hour every day. That is 4Kw *30days = 120Kw/MonthThe electric Iron is used for 20 Minutes every day.That is 1Kw * 0.34hr *30= 10Kw/MonthThe Led Tv is used for 12hours/day. That is 0.235Kw*12*30=84.6Kw/monthThe bulbs are used for about 18hours/day. That is 0.78kw*18*30= 421.2Kw/monthThe electric standing fan is used for about 18 hours/day. That is 0.055kw*18*30=29.7Kw/monthThe washing machine is used for about 6 hours/week. That is 0.255Kw*4*6=6.12Kw/month
Step 3 - Add up all the Kw used per month and multiply by the cost of 1 Kw
Total Kilowatt Consumed/Month = 1110 +108+120+10+84.6+421.2+29.7+6.12
= 1,889.62Kw/Month
Total cost of energy consumed per month = 1889.62 * Rs 10
= Rs 18,896.2
Cheers!
I think this is physics?
A student wants to calculate the density of the two objects shown below:
A Metal Cube and a Small Statue.
Describe the methods that the student should use to calculate the densities of the two objects.
ASAP please this piece of work is already late XD
Answer:
Okay
Explanation:
First we should quickly remind ourselves of the equation for density:density= mass/ volumeTo calculate the density we need a method of measuring the mass of each object and another method for measuring the volume of each object. To measure the mass in both cases we can simply use a measuring balance. To measure the volume we will need to use 2 separate methods. For the cube we can simply measure the length, height and depth with a ruler, multiply our measurements and we obtain the volume. The statue is a little more tricky because it has an irregular shape so we can't use the ruler anymore. Instead we should use graduated tank/trough of water. First of all measure the amount of water in the tank before putting in the statue. Then submerge the statue in the water and take another measurement of the volume of water in the tank. The statue will displace the water in the tank giving a higher value. We finally subtract the initial volume from the final volume and we should obtain the volume of the statue.We now have all the measurements necessary to calculate the density of both objects!
Velocities of two bodies A and B are given in vectors notation as va =i+2j-3k and Vb=3i+2j-k what will be the relative velocity of b with respect to a?
Answer:
[tex]V_{B/A}=2i+2k[/tex]
Explanation:
The relative velocity can be calculated by means of the difference between vector B minus vector A.
[tex]V_{A}=i+2j-3k\\V_{B}=3i+2j-k\\V_{B}-V_{A}=(3-1)i + (2-2)j+(-1-(-3))k\\V_{B/A}=2i+2k[/tex]
Intensitatea curentului electric a unui circuit este de 123A iar sarcina electrica este de 1,7C sa se afle intervalul de timp in care este transportata sarcina electrica
The intensity of the electric current of a circuit is 123A and the electric charge is 1.7C to find the time interval in which the electric charge is transported.
Given that,
Current, I = 123 A
Electric charge, q = 1.7 C
To find,
The time interval in which the charge is transported.
Solution,
The electric current is given by electric charge per unit time. So,
[tex]I=\dfrac{q}{t}\\\\t=\dfrac{q}{I}\\\\t=\dfrac{1.7}{123}\\\\t=0.0138\ s[/tex]
So, the required time is 0.0138 seconds.
Think about holding a glass of cold water. Your hand is warmer than the glass. Do the particles in your hand or those in the glass of cold water move faster? Why?
technically usually the warmer object/substances particles move master which causes friction among the particles plus the kinetic energy being converted to thermal energy, so i would say the hand.
What is common between transverse waves and longitudinal waves?
Both include an amplitude, crest, and rarefactions
Both move faster at higher temperatures
Both move slower through densely packed molecules
Both include a wavelength from compression to compression
Answer:
b
Explanation:
i took the quiz
Both the transverse and longitudinal waves move faster at higher temperatures.
What is meant by transverse wave?A wave in which the motion of the particles is perpendicular to the direction of the wave propagation is referred to as a transverse wave.
Here,
As a result of the shear stress that is produced, transverse waves are frequently observed in elastic materials.
In this situation, the oscillations are caused by the displacement of the solid particles from their relaxed state in directions perpendicular to the wave's propagation.
The wave in which the particles of the medium oscillate parallel to the direction of propagation of the wave is called a longitudinal wave.
Sound waves similarly oscillate parallel to the direction of propagation, forming the compressions and rarefactions. Hence sound waves are called longitudinal waves.
Hence,
Both the transverse and longitudinal waves move faster at higher temperatures.
To learn more about transverse waves, click:
https://brainly.com/question/13863548
#SPJ5
If an oceanic plate and a continent plate converge, or push towards each other, which plate will sink under the other one?
Answer:
The oceanic plate will sink under
Explanation:
Due to erosion over time and the sudden shift, the continental plate will rise causing earthquakes, tsunami’s, etc..
Help me I got this photo please
Answer:
Carbon Sink- photosythesis, ocean absorption, fossilization
Carbon Source- combustion, respiration
Explanation:
in which diagram 1 or 2 would the person be experiencing summer? explain
Answer:
Diagram 1
Explanation:
In diagram one, the earth is leaning toward the sun, meaning it is summertime.
The person will experience summer in diagram one because the earth is tilted towards the sun.
What is the summer season?From diagram one we can see that earth is tilted towards the sun. During summer, the North Pole of the earth is tilted towards the sun.
As a consequence, the sun’s path is higher in the sky, causing the northern hemisphere to receive more light and heat.
In addition, because the sun is in the sky for more hours, the summer solstice is also the longest day of the year.
These extra hours of sunlight give the sun more time to heat the earth and this is the main reason for summer to be the hottest season.
During summer the sun is perpendicular to the tropic of cancer and heats more areas that lie in the tropic of cancer.
Thus the answer will be diagram 1 because the earth is tilted towards the sun.
To know more about the Summer season follow
https://brainly.com/question/4172420
If an object of 10kg has gained 300J of GPE, what height has the object gained
define specific heat capacity
Estimate the volume of each ball. Use the formula
where V is the volume and r is the radius. Record the volumes in Table A of your Student Guide.
What is the estimated volume of the table tennis ball?
cm3
What is the estimated volume of the golf ball?
cm3
The given question is incomplete. The complete question is:
Estimate the volume of each ball. Use the formula [tex]v=\frac{4\pi\times r^3}{3}[/tex] where v is the volume and r is the radius. record the volume in table A of your student guide. The radius of the tennis ball is 2.1 cm and the radius of thr golf ball is 2.0 cm. What is the estimated volume of the table tennis ball in [tex]cm^3 [/tex] What is the estimated volume of the golf ball in
Answer: Volume of the tennis ball is [tex]38.8cm^3[/tex] and Volume of the golf ball is [tex]33.5cm^3[/tex]
Explanation:
We have to find the Volume of tennis ball and golf ball by using the formula [tex]v=\frac{4\pi\times r^3}{3}[/tex]
Radius of the tennis ball = 2.1 cm
Radius of the golf ball =2.0 cm.
Putting the value of radius in the formula , we get:
Volume of the tennis ball = [tex]\frac{4\times 3.14\times (2.1cm)^3}{3} =38.8cm^3[/tex]
Volume of the golf ball = [tex]\frac{4\times 3.14\times (2.0cm)^3}{3} =33.5cm^3[/tex]
Volume of the tennis ball is [tex]38.8cm^3[/tex] and Volume of the golf ball is [tex]33.5cm^3[/tex]
it's 38.8 and 33.5 hope this helps
Which of these statements is FALSE?*
If you find someone's DNA at a crime scene, they are guilty without a doubt
Even identical Twins have different DNA Fingerprints
DNA is individual evidence
When DNA is found, it will not always lead to usable DNA Fingerprint evidence
1. Which of these is not a property of a soun wave? A. Elasticity B. Loudness C. Pitch
Answer:
A
Explanation:
What could you do to find the density of a fork, knife, and a spoon?
Answer:
Density is equal to mass divided by volume.
Explanation:
Density = mass / volume
or
p=m/v
Answer:
Use the formula D=m/v
Explanation: In order to find the volume for these objects, use a ruler and measure the length, width, and height. Proceed to multiply them all together, L*W*H. To find the mass of an object, I would say to use a triple beam balance. After finding both the mass and volume of you object, use the formula D = m/v and you'll get your answer.
Look at the atoms below
a. Atom W: 9 protons and 9 neutrons
b. Atom X: 8 protons and 9 neutrons
c. Atom Y: 9 protons and 9 neutrons
d. Atom Z: 9 protons and 10 neutrons
Which ones below are isotopes of each other and why?
element z are isotopes because number of netron are different and number of protons are same
A softball and a baseball are launched from 2 different pitching machines at the same time.
th
Softball
182 g
165 m/sec
Baseball
143 g
112 m/sec
Which of these BEST explains what factors give the baseball and softball different velocities?
O mass and speed
O mass and direction
O speed and direction
O size and mass
The two blocks shown below have masses m1 = 400 g and m2 = 600 g. They are connected by a string and lie on a frictionless tabletop. A 3.5 N force is applied to block m2, pulling it to the right. Find the acceleration then find the tension force in the string between two objects
PLEASE ANSWER ILL GIVE BRAIN!!!
Answer:
what's the question?........
The difference between temperature and thermal energy is that___________.
Answer:
Heat vs temperature - Energy Education The core difference is that heat deals with thermal energy, whereas temperature is more concerned with molecular kinetic energy. Heat is the transfer of thermal energy, whereas temperature is a property the object exhibits.
find the cp of an article which is sold for rupees 4048 , thereby , making a profit of 15 percent
Answer:
4048 = 115x/100.
Explanation:
Profit P = (15/100) X x.
P= 15x/100.
15x/100 = 4048- x.
4048 = 15x/100 + x.
4048 = 115x/100.
a manor house was most similar to
Answer:
I don't know the multiple choices or if you have any but my best answer is castle.
I hope this helps!
How much potassium nitrate (KNO3) would dissolve in 50 milliliters of water at 45ºC given that 55g of KNO3 is dissolved in 150mL of water at 45°C.
A. 19.7g
B. 15.1g
C. 18.3g
D. 23.3g
Putting the ball back into play by the offense is called a ____ ____
Answer:
Hand ball ?
Explanation:
A 5 kg ball of clay is moving with a speed of 25 m/s directly toward a 10 kg ball of clay which is at rest. The two clay balls collide and stick together. What is their velocity immediately after the collision?
Answer:
8.3m/s
Explanation:
Given parameters:
mass of clay ball = 5kg
Speed of clay ball = 25m/s
mass of clay ball at rest = 10kg
speed of clay ball at rest = 0m/s
Unknown:
Velocity after collision = ?
Solution:
Since the balls stick together, this is an inelastic collision:
m1v1 + m2v2 = v(m1 + m2)
5(25) + 10(0) = v (5 + 10)
125 = 15v
v = 8.3m/s
