A satellite measures a spectral radiance of 8 Watts/m2/um/ster at a wavelength of 10 microns. Assuming a surface emissivity of 0.90, what would be the estimated temperature

Answers

Answer 1
Satellite video of the show will come to

Related Questions

A gymnast weighs 450 N. She stands on a balance beam of uniform construction which weighs 250 N. The balance beam is 3.0 m long and is supported at each end. If the support force at the right end is four times the force at the left end, how far from the right end is the gymnast

Answers

Answer:

   x = 9.32 cm

Explanation:

For this exercise we have an applied torque and the bar is in equilibrium, which is why we use the endowment equilibrium equation

Suppose the counterclockwise turn is positive, let's set our reference frame at the left end of the bar

          - W l / 2 - W_{child} x + N₂ l = 0

             x = [tex]\frac{-W l/2 + n_2 l}{W_{child}}[/tex]             1)

now let's use the expression for translational equilibrium

         N₁ - W - W_(child) + N₂ = 0

indicate that N₂ = 4 N₁

we substitute

           N₁ - W - W_child + 4 N₁ = 0

           5 N₁ -W - W_{child} = 0

           N₁ = ( W + W_{child}) / 5

         

we calculate

           N₁ = (450 + 250) / 5

          N₁ = 140 N

           

we calculate with equation 1

           x = -250 1.50 + 4 140 3) / 140

           x = 9.32 cm

Our system is a block attached to a horizontal spring on a frictionless table. The spring has a spring constant of 4.0 N/m and a rest length of 1.0 m, and the block has a mass of 0.25 kg.

Compute the PE when the spring is compressed by 0.50 m.

Answers

Answer

E - 1/2 K x^2      potential energy of compressed spring

E = 1/2 * 4 N / m * (.5 m)^2 = 2 * .5^2 N-m = .5 N-m

Given that two vectors A = 5i-7j-3k, B = -4i+4j-8k find A×B​

Answers

[tex]\textbf{A}×\textbf{B}= 68\hat{\textbf{i}} + 52\hat{\textbf{j}} - 8\hat{\textbf{k}}[/tex]

Explanation:

Given:

[tex]\textbf{A} = 5\hat{\textbf{i}} - 7\hat{\textbf{j}} - 3\hat{\textbf{k}}[/tex]

[tex]\textbf{B} = -4\hat{\textbf{i}} + 4\hat{\textbf{j}} - 8\hat{\textbf{k}}[/tex]

The cross product [tex]\textbf{A}×\textbf{B}[/tex] is given by

[tex]\textbf{A}×\textbf{B} = \left|\begin{array}{ccc}\hat{\textbf{i}} & \hat{\textbf{j}} & \hat{\textbf{k}} \\\:\:5 & -7 & -3 \\ -4 & \:\:4 & -8 \\ \end{array}\right|[/tex]

[tex]= \left|\begin{array}{cc}-7 & -3\\\:4 & -8\\ \end{array}\right|\:\hat{\textbf{i}}\:+\:\left|\begin{array}{cc}-3 & \:\:5\\-8 & -4\\ \end{array}\right|\:\hat{\textbf{j}}\:+\: \left|\begin{array}{cc}\:\:5 & -7\\-4 & \:\:4\\ \end{array}\right|\:\hat{\textbf{k}}[/tex]

[tex]= 68\hat{\textbf{i}} + 52\hat{\textbf{j}} - 8\hat{\textbf{k}}[/tex]

what is meant by specific latent heat of vaporization of water is -2.26mjkg^-1 or -2.26mj/kg?​

Answers

Answer:

The specific latent heat of a substance is the amount of energy required to change the state of one kilo of the substance without change in it temperature.The latent heat of vaporization or evaporation is the heat given to some mass to convert if from the liquid to the vapor phase.

A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?​

Answers

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

What is velocity?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

During normal beating, the heart creates a maximum 4.10-mV potential across 0.350 m of a person's chest, creating a 1.00-Hz electromagnetic wave. (a) What is the maximum electric field strength created? V/m (b) What is the corresponding maximum magnetic field strength in the electromagnetic wave? T (c) What is the wavelength of the electromagnetic wave?

Answers

Explanation:

Given that,

Maximum potential, V = 4. mV

Distance, d = 0.350 m

Frequency of the wave, f = 100 Hz

(a) The maximum electric field strength created is given by:

[tex]E=\dfrac{V}{d}\\\\E=\dfrac{4.1\times 10^{-3}}{0.350 }\\\\E=0.0117\ V/m[/tex]

(b) The corresponding maximum magnetic field strength in the electromagnetic wave is given by :

[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.0117}{3\times 10^8}\\\\B=3.9\times 10^{-11}\ T[/tex]

(c) The wavelength of the electromagnetic wave can be calculated as :

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{100}\\\\=3\times 10^6\ m[/tex]

So, the wavelength of the electromagnetic wave is [tex]3\times 10^6\ m[/tex].


Physics question plz help ASAP

Answers

The Correct answer is D Hope this helps :)

a person lifts 60kg on the surface of the earth, how much mass can he lift on the surface of the moon if he applies same magnitude of force​

Answers

Explanation:

Hey there!

According to the question;

A person can lift mass of 60 kg on earth.

mass(m1) = 60kg

acceleration due to gravity on earth (a) = 9.8m/s²

Now;

force (f) = m.a

= 60*9.8

= 588 N

Since, there is application of same magnitude of force on moon,

mass(m) =?

acceleration due to gravity on moon (a) = 1.67m/s²

Now;

force (f) = m.a

588 = m*1.67

m = 352.09 kg

Therefore, the person who can lift the mass of 60 kg on earth can lift mass of 352 kg on moon.

Hope it helps!

Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097

Outside a spherically symmetric charge distribution of net charge Q, Gauss's law can be used to show that the electric field at a given distance:___________.
A) must be directed inward.
B) acts like it originated in a point charge Q at the center of the distribution.
C) must be directed outward.
D) must be greater than zero.
E) must be zero.

Answers

Answer:

Q at the center of the distribution.

Explanation:

The Gauss's law is the law that relates to the distribution of electrical charges to the resulting electrical field. It states that a flux of electricity outside the arabatory closed surface is proportional to the electricitical harg enclosed by the surface.

The potential difference between the plates of a capacitor is 234 V. Midway between the plates, a proton and an electron are released. The electron is released from rest. The proton is projected perpendicularly toward the negative plate with an initial speed. The proton strikes the negative plate at the same instant the electron strikes the positive plate. Ignore the attraction between the two particles, and find the initial speed of the proton.
I have tried looking at the cramster.com solution manual and do not like the way it is explained. Simply put, I cannot follow what is going on and I am looking for someone who can explain it in plain man's terms and help me understand and get the correct answer. I am willing to give MAX karma points to anyone who can help me through this. Thank you kindly.

Answers

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]

A 771.0-kg copper bar is melted in a smelter. The initial temperature of the copper is 300.0 K. How much heat must the smelter produce to completely melt the copper bar? For solid copper, the specific heat is 386 J/kg • K, the heat of fusion is 205 kJ/kg, and the melting point is 1357 K.

Answers

Answer:

4.73 × 10^5

Explanation:

given A=4i-10j and B= 7i+5j find b such that A+bB is a vector pointing along the x-axis (i.e has no y component)​

Answers

Answer:

-4/7

Explanation:

Given the following

A=4i-10j and B= 7i+5j

A+ bB = 4i-10j + (7i+5j)b

A+ bB =  4i-10j + 7ib+5jb

A+ bB =

The vector along the x-axis is expressed as i + 0j

If the vector A+ bB is pointing in the direction of the x-axis then;

[tex]A+ bB * \frac{i+0j}{|i+0j|} = 0 \\ (4+7b)i-(10-5b)j* \frac{i+0j}{\sqrt{1^2+0^2} } = 0\\(4+7b)i-(10-5b)j *(i+0j) = 0\\4+7b-0 =0\\7b=-4\\b = -4/7[/tex]

Hence the value of b is -4/7

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

According to the statement, we have following system of vectorial equations:

[tex]\vec A = 4\,\hat {i} - 10\,\hat{j}[/tex] (1)

[tex]\vec {B} = 7\,\hat{i} + 5\,\hat{j}[/tex] (2)

[tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] (3)

By applying (1) and (2) in (3):

[tex](4\,\hat{i}-10\,\hat{j}) + \beta\cdot (7\,\hat{i}+5\,\hat{j}) = c\,\hat{i}[/tex]

[tex](4+7\cdot \beta)\,\hat{i} +(-10+5\cdot \beta)\,\hat{j} = c\,\hat{i}[/tex]

And we get two scalar equations after analyzing each component:

[tex]4+7\cdot \beta = c[/tex] (4)

[tex]-10+5\cdot \beta = 0[/tex] (5)

We solve for [tex]\beta[/tex] in (5):

[tex]\beta = 2[/tex]

And for [tex]c[/tex] in (4):

[tex]c = 4+7\cdot (2)[/tex]

[tex]c = 18[/tex]

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

Please see this question related to Sum of Vectors for further details: https://brainly.com/question/11881720

A 2.0 kg puck is at rest on a level table. It is pushed straight north with a constant force of 5N for 1.50 s and then let go. How far does the puck move from rest in 2.25 s?

Answers

Answer:

d = 6.32 m

Explanation:

Given that,

The mass of a puck, m = 2 kg

It is pushed straight north with a constant force of 5N for 1.50 s and then let go.

We need to find the distance covered by the puck when move from rest in 2.25 s.

We know that,

F = ma

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{2}\\\\a=2.5\ m/s^2[/tex]

Let d is the distance moved in 2.25 s. Using second equation of motion,

[tex]d=ut+\dfrac{1}{2}at^2\\\\d=0+\dfrac{1}{2}\times 2.5\times (2.25)^2\\\\d=6.32\ m[/tex]

So, it will move 6.32 m from rest in 2.25 seconds.

What is not one of the main uses of springs?
A. Car suspension
B. Bike suspension
C. The seasons
D. Clock making

Answers

Hi! I believe the answer is C. or The seasons because all the other options use springs when making cars, bikes, and clocks. I hope this helped. Goodluck :)

Flag question
Consider the pressure and force acting on the
dam retaining a reservoir of water. Suppose the
dam is 500-m wide
and the water is 80.0-m
deep at the dam, as illustrated below. What is
the average pressure on the dam due to the
water?​

Answers

Answer:

P = density (p) * g * h

P = 1000  kg/m^3 * 9.8 m/s^2 * 40 m = 392,000 N/m^2

since kg m / s^2 = Newtons

The average pressure is 1/2 (pressure at 0m +  pressure 80 m) for liquid of uniform density

3. A microscope is focused on a black dot. When a 1.30 cm -thick piece of plastic is placed over the dot, the microscope objective has to be raised 0.410 cm to bring the dot back into focus. What is the index of refraction of the plastic

Answers

The index of refraction of the plastic is approximately 1.461

The known values in the question are;

The thickness of the piece of plastic placed on the dot = 1.30 cm

The height to which the microscope objective is raised to bring the dot back to focus = 0.410 cm

The unknown values in the question are;

The index of refraction

Strategy;

Calculate the refractive index by making use of the apparent height and real height method for the black dot under the thick piece of plastic

[tex]\mathbf{ Refractive \ index, n = \dfrac{Real \ depth}{Apparent \ depth}}[/tex]

The real depth of the dot below the piece of plastic, d₁ = 1.30 cm

The apparent depth of the dot, d₂ = The actual depth - The height to which the microscope is raised

Therefore;

The apparent depth of the dot, d₂ = 1.30 cm - 0.410 cm = 0.89 cm

[tex]The \ refractive \ index, \ n = \dfrac{d_1}{d_2}[/tex]

Therefore, n = 1.30/0.89 ≈ 1.461

The refractive index of the plastic block, n ≈ 1.461

Learn more about refractive index of light here;

https://brainly.com/question/24321580

Condensation is the process of ____________________.
a. planetesimals accumulating to form protoplanets.
b. planets gaining atmospheres from the collisions of comets.
c. clumps of matter adding material a small bit at a time.
d. clumps of matter sticking to other clumps.
e. clouds formed from volcanic eruptions.

Answers

D. I hope my answer helps you!

If the mass of an object is 15 kg and the velocity is -4 m/s, what is the momentum?

Answers

momentum p= m x v = 15 x -4 = -60 N.s

A student graphs power (p) on the vertical axis and time (t) on the horizontal axis. The graph appears to be a hyperbola.

a) What should the student graph on each axis to test whether the relationship is actually
hyperbolic?

b) If the relationship is actually hyperbolic, what is the general equation for the relationship between power and time?

Answers

Answer: it would be daddy

Explanation:

Because I’m daddy

Where is the center of mass of homogeneous body which has a regular ​

Answers

Following the definition of the center of mass, "In physics, the center of mass of a distribution of mass in space is the unique point where the weighted relative position of the distributed mass sums to zero."

(see explanation below)

An object is acted upon by two and only two forces that are equal magnitude and oppositely directed. Is the objected necessarily in static equilibrium? Explain. You can draw a picture if that helps explain.

Answers

Answer:

the body is subjected to a continuous rotation and the body is not in rotational equilibrium

Explanation:

For an object to have a static equilibrium, it must meet two relationships

             ∑ F = 0

             ∑ τ =0              

force acting on a body fulfills the relation of

         sum F = F - F = 0

when two forces do not move from position.

To find the torque we assume that the counterclockwise rotations are positive

        Σ τ = - F r - F r

        Στ = -2 Fr <> 0

consequently the body is subjected to a continuous rotation and the body is not in rotational equilibrium

what additional load will be required to cause the extension of 2.0cm when an elastic wire extend by 1.0cm when a load of 20g range from it

Answers

Answer:

The additional load is 20g


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right

A cycle track is 500 metres long. A cyclist completes 10 laps (that is, he rides completely round the track 10 times).
a) How many kilometres has the cyclist travelled?
b) On average it took the cyclist 50 second to complete one lap (that it, to ride round just one).
(i) What was the average speed of the cyclist?
(ii) How long in minutes and seconds dit it take the cyclist to complete the 10 laps?
c) Near the end of the run the cyclist put on a spurt. During this spurt it took the cyclist 2 seconds to increase speed from 8 m/s to 12 m/s. What was the cyclist's acceleration during this spurt?

Answers

Explanation:

a) D_t = 500m*10laps

D_t = 5000m or 5km

b)

I) v = d/t

v = 500m/50s

v = 10m/s

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

c) v_f = v_0 + a*t

v_f-v_0 = a*t

a = (v_f-v_0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

Part(a),

The distance travelled by the cyclist is 5 km.

Part(b),

(i) The average speed is 10 m/s

(ii) The time taken to cover 10 laps is 8 minutes and 20 seconds.

Part(c),

The acceleration is 2 m/s²

What is speed?

Speed is defined as the ratio of the time distance travelled by the body to the time taken by the body to cover the distance. Speed is the ratio of the distance travelled by time. The unit of speed in miles per hour.

a) The distance will be calculated as

D = 500m*10laps

D = 5000m or 5km

b) The average speed is calculated as,

I) v = d/t

v = 500m/the 50s

v = 10m/s

The time will be calculated as,

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

The acceleration is calculated as,

c) vf = v0 + at

vf-v0 = at

a = (vf-v0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

To know more about speed and acceleration follow

https://brainly.com/question/14344386

#SPJ2

a concave mirror has a radius of curvature of 60cm. How close to the mirror should an object be placed so that the rays travel parallel to each other after reflection

Answers

Answer:

Answer:30 cm

Answer:30 cmExplanation:

Answer:30 cmExplanation:Given=ROC= 60cm

Answer:30 cmExplanation:Given=ROC= 60cmObject be placed so that the rays that came from the object to them mirror are reflected from the mirror, and, then travel parallel to each other= 30cm at focus.

which of the following cannot be increased by using a machine of some kind? work, force, speed, torque

Answers

Explanation:

Work cannot be increased by using a machine of some kind.

Work cannot be increased by using a machine of some kind.

A machine is any device in which the effort applied at one end overcomes a load at the other end.

Machines are generally used to perform different tasks faster.

However, a simple machine can not be used to increase the amount of work done at any time.

Force, speed and torque can all be increased using machines.

Learn more: https://brainly.com/question/15365822

A 55kg bungee jumper has fallen far enough that her bungee cord is beginning to stretch and resist her downward motion . Find the ( magnitude and direction ) exerted on her by the bungee cord at an instant when her downward acceleration has a magnitude of 7.1m/s2​

Answers

Answer:

148.5 N

Explanation:

Given that,

The mass of a bungee jumper, m = 55 kg

The downward acceleration, a = 7.1 m/s²

We need to find the net force acting on the jumper. As it is moving in downward direction, net force is :

T = m(g-a)

Put all the values,

T = 55(9.8 - 7.1)

= 148.5 N

So, the force exerted on the bungee cord is 148.5  N.

Answer:

The downward force is 148.5 N.

Explanation:

mass, m = 55 kg

downwards acceleration, a = 7.1 m/s^2

Let the force is F.

According to the newton's second law

m g - F = m a

F = m (g - a)

F = 55 (9.8 - 7.1)

F = 148.5 N

Megan accelerates her skateboard from 0 m/s to 8 m/s in 2 seconds. What is the magnitude of the acceleration of the skateboard?
O 8 m/s^2
O 16 m/s^2
O 2 m/s^2
O 4 m/s^2​

Answers

Answer:

chk picture for eqn

Explanation:

A 10 n force is applied horizontally on a box to move it 10 m across a frictionless surface. How much work was done to move the box?

Answers

Given from question
Force = 10 N
Displacement = 10 m
Work done = ?
We know that
Work done = force X displacement
So 10 X 10
100
Work done = 100J answer

Answer:

[tex]\boxed {\boxed {\sf 100 \ J}}[/tex]

Explanation:

We are asked to calculate the work done to move a box.

Work is the product of force and distance or displacement.

[tex]W= F*d[/tex]

A 10 Newton force is applied horizontally on the box. Since the surface is frictionless, there is no force of friction, and the net force is 10 Newtons. The force moves the box 10 meters.

F= 10  N d= 10 m

Substitute the values into the formula.

[tex]W= 10 \ N * 10 \ m[/tex]

Multiply.

[tex]W= 100 \ N*m[/tex]

Let's convert the units. 1 Newton meter is equal to 1 Joule, therefore our answer of 100 Newton meters is equal to 100 Joules.

[tex]W= 100 \ J[/tex]

100 Joules of work was done to move the box.

Other Questions
im having trouble with this question. if anyone can answer it would mean a lot Opponents of labeling defend GMOs, but proponents are skeptical.What type of sentence is this? a. compound-complex b. simple c. complex d. compound One of the techniques for absolute dating of wood using annual pairs of growth rings is called:Group of answer choicesa. radiocarbon datingb. isotope analysisc. dendrochronologyd. both a and b above discuss extensively, the historical development of public Administration I need to verify this function is symmetric with respect to the y-axis. How would I go about doing that?h(x)=x^4-5x^2+3 Necesito un corte de pelo. Voy a _____.1. la pastelera 2. la carnicera3. la peluquera 821) The integon which is 15 more than - 55 is Generally, the primary source of all water supply is said to be In the diagram below, lines AB and CD are... What was the first colonial settlement in New England? Solve the inequality (help please) Please help me to solve this question pleaseee A research historian is interested in finding sunken treasure in the Atlantic Ocean. She knows that her equipment is only good enough to recover items that are at a depth of 5 000 m or less. The speed of sound through the water is 1 530 m/s. While working, the sonar equipment detects a reflection that is of interest. The echo from the item takes 6.2 s to return to the sonar detector. Will she be able to retrieve this item? 3x + ky = 8X 2ky = 5are simultaneous equations where k is a constant.Show that x = 3. Splash Island and Magic Park are amusement parks. If you visit splash Island, you pay $3 per ride plus a $14 entrance fee. If you visit Magic Park, you pay $5 per ride plus a $7 entrance fee. You have $32. At which park could you go on more rides? WILL MARK BRAINLIEST! Can someone please help! I don't understand some of these questions :( The Bargain of 1877: Group of answer choices allowed Samuel Tilden to become president. called for the passage of the Fifteenth Amendment. marked a compromise between Radical and Liberal Republicans. was made by Grant to prevent his impeachment over the Whiskey Ring. led to the appointment of a southerner as postmaster general. Which of the following is an example of an anabolic reaction?A citric acid cycleB fatty acid decarboxylationC glycolysisD photosynthesis The amount of water dispensed by a water dispenser is normally distributed,with a mean of 11.60 ounces and a standard deviation of 0.15 ounces. Inwhich range will the amount of water dispensed be found 68% of the time?A. 11.30 ounces to 11.90 ouncesB. 11.15 ounces to 12.05 ouncesC. 11.45 ounces to 11.75 ouncesD. 11.00 ounces to 12.20 ouncesSUBMIT Blood pressure values are often reported to the nearest 5 mmhg (100, 105, 110, etc.). the actual blood pressure values for nine randomly selected individuals are given below. 108.6 117.4 128.4 120.0 103.7 112.0 98.3 121.5 123.2Required:a. What is the median of the reported blood pressure values?b. Suppose the blood pressure of the second individual is 117.7 rather than 117.4 (a small change in a single value). What is the new median of the reported values?c. What does this say about the sensitivity of the median to rounding or grouping in the data?