The force needed to pull the cup of the slingshot 4.2 cm from its equilibrium position is 2667N/m.
From the Hook's law, the spring constant may be expressed as follows:
k=F / x
wherein F=32N is the elastic pressure (which is identical to the applied one if rubber bands do no longer flow after stretching), and x=1.2cm=0.012m is the elongation of the bands.
k= 32N / 0.012m ≈ 2667N/m
A slingshot is a handheld projectile weapon that uses elastic materials, such as rubber bands or natural fibers, to propel small projectiles. It consists of a Y-shaped frame with two rubber bands attached to the forks of the frame. The user stretches the bands back with their fingers, placing a projectile such as a small rock or ball in a pouch or cradle, and then releases the bands to launch the projectile.
Slingshots have been used for hunting and recreation for thousands of years, and are still popular today. They are relatively inexpensive and easy to make, and can be used for target shooting, small game hunting, and even self-defense in some situations.
To learn more about Slingshot visit here:
brainly.com/question/31135747
#SPJ4
Janine hits a hockey puck across an ice rink. The distance between the puck and Janine for the first ten seconds after she hits it is graphed below.
Judging from the graph, which of the following statements is true?
A.
The hockey puck moved at a constant speed away from Janine.
B.
The hockey puck's speed decreased as it moved away from Janine.
C.
The hokey puck moved at a constant speed toward Janine.
D.
The hockey puck's speed increased as it moved away from Janine.
A. The hockey puck moved at a constant speed away from Janine.
When the hockey puck is skating across the ice at a constant speed?The hockey puck is in equilibrium as a result of moving at a steady pace. Dynamic equilibrium is the name given to this form of equilibrium. Hence, if the hockey puck is moving over the ice at a constant pace, it is in equilibrium.
Is velocity merely the direction in which an object moves and unrelated to speed?There is no connection between velocity and speed; velocity is the direction that an object moves in. Velocity is the combination of speed and direction. Speed and velocity are very similar to each other.
Which of Newton's equations of motion best describes the motion of a hockey puck sliding through ice without any external forces acting on it?The sum of the forces exerted on an object must be zero since, in accordance with Newton's first law of motion, an object moving at a constant speed experiences no net external force.
To know more about the hockey puck visit:
https://brainly.com/question/11488312
#SPJ1
could someone help me with B?
i have the mark scheme i just don't know how they got that answer
Answer:
Explanation:
Distance is the total length of the path taken from point A to B (the total distance of the whole curvy train route).
Displacement is the straight-line distance from the start point to the end point. Draw a straight line from A to B, then measure it in exact cm. Multiply your measurement in cm by 5 to get the answer in km.
calculate T1 , T2 and T3
Using the triangle of forces to get the system of the forces;
T1 = 866 NT2 = 500 NT3 = 1000 NWhat is the triangle of forces theorem?If three forces acting on a body are in equilibrium, then they can be represented in magnitude and direction by the three sides of a triangle taken in order.
In other words, the three forces can be drawn as vectors, and these vectors can be arranged to form a closed triangle.
We know that we have the other end of the triangle to be;
100 Kg * 10 m/s^2 = 1000 N
The missing angle is;
180 - (30 + 60)
= 90 degrees
Thus;
1000/Sin 90 = T1/Sin 60
T1 = 100 Sin 60/Sin 90
T1 = 866/1
T1 = 866 N
1000/Sin 90 = T2/Sin 30
T2 = 1000 Sin 30/Sin 90
T2 = 500 N
Learn more about forces:https://brainly.com/question/13191643
#SPJ1
A 1.5kg block is held in place and compresses a 150N/m spring by 30cm from its relaxed position. The block is then released. What speed will the block have at the instant when the spring is no longer compressed?
Answer: simple harmonic motion
Simple harmonic motion. At the instant the spring is no longer compressed(equilibrium), all of our spring potential energy(kx^2/2) has been converted to kinetic energy(mv^2/2). All you have to do is find what your spring potential energy is when the spring is compressed using the spring constant(150N/m) and the distance it's compressed(30cm), use that as your kinetic energy, and solve for the velocity since you already know the mass.
which of the following formulas gives us ml, the total number of possible orbitals within a subshell? select the correct answer below: ml
Ml = 2l + 1 is the right formula to calculate the total number of potential orbitals in a subshell.
How does ML calculate the number of orbitals?ml = -l,..., 0,..., +l is the magnetic quantum number (ml). Describes how an orbital with a certain energy (n) and form should be oriented in space. (l). Each subshell has 2l+1 orbitals, each of which may house one electron. This number separates each subshell into independent orbitals.
How many Subshells in total are there in a shell?Due to the existence of subshells in each shell, this model collapses at the n=3 shell. The names of the four subshells are s, p, d, and f. Within each subshell, a different amount of electrons can fit. The n value determines how many subshells there are in the shell.
To know more about potential orbitals visit:-
https://brainly.com/question/4033076
#SPJ1
Question:
Which of the following formulas gives us ml, the total number of possible orbitals within a subshell?
A group of students conduct an experiment to study Newton's second law of motion. They applied a force to a toy car and measure its acceleration. The table shows the results.
Force (N) Acceleration (m/s²)
2.0 5.0
3.0 7.5
6.0 15.0
If the students graph the data points, which conclusion will they be able to make?
The data points will fall along a line. This shows that as the force increases, the acceleration increases.
Newton's second law of motion is the fundamental law of motion in classical mechanics.
The data points will fall along a line. This shows that as the force increases, the acceleration increases.
A group of students conduct an experiment to study Newton's second law of motion. They applied a force to a toy car and measure its acceleration.
The Force (N) and Acceleration (m/s²) measurement of the group of students, as seen in the table, is given as 2.0 and 5.0, 3.0 and 7.5, and 6.0 and 15.0 respectively.
As the group of students will graph the data points, they will be able to conclude that the data points will fall along a line. This shows that as the force increases, the acceleration increases.
The law is also known as the force law, and it is a fundamental principle of classical mechanics. It defines the relationship between an object's motion and the forces acting upon it.
for such more question on fundamental law
https://brainly.com/question/18805035
#SPJ11
a tennis ball is dropped from a height of 1.21 m above the ground. calcualte its velocity when it is 0.27m from the ground
The velocity of the tennis ball when it is 0.27m from the ground is approximately 3.39 m/s.
What is velocity?
To calculate the velocity of the tennis ball when it is 0.27m from the ground, we can use the principle of conservation of mechanical energy, which states that the total mechanical energy of an object is conserved when it moves through a conservative force field, such as gravity.
At the initial position, the ball has potential energy due to its position above the ground, but no kinetic energy as it is at rest. At the final position, the ball has no potential energy (since it is at the same height as the ground), but it has kinetic energy due to its motion. Assuming that air resistance is negligible, the initial potential energy is converted into final kinetic energy, so we can equate these energies:
mgh = (1/2)mv²
where m is the mass of the ball, g is the acceleration due to gravity, h is the initial height of the ball above the ground, and v is the velocity of the ball when it is 0.27m from the ground.
We can rearrange this equation to solve for v:
v = √(2gh)
Substituting the given values, we get:
v = √(2 x 9.81 m/s² x (1.21 m - 0.27 m)) = 3.39 m/s
Therefore, the velocity of the tennis ball when it is 0.27m from the ground is approximately 3.39 m/s.
To know more about velocity, visit:
https://brainly.com/question/17127206
#SPJ1
A crane lifts an object weighing 25000N up with a constant speed of 0.8m/s. calculate the capacity of that crane
A spring of spring constant k=8.25N/m is displaced from equilibrium by a distance of 0.150 m. What is the stored energy in the form of spring potential energy?
PE is the potential energy stored in the spring, k is the spring constant, and x is the PE is the potential energy stored in the spring, k is the spring constant, and x is the displacement from equilibrium.
What is a displacement?Displacement is a vector quantity that describes the overall change in position of an object from its initial position to its final position. It is a vector because it has both magnitude (the distance between the initial and final positions) and direction (the direction from the initial position to the final position).
For example, if an object moves from point A to point B, its displacement is the vector that points from A to B, regardless of the path taken to get there. Displacement can be positive, negative, or zero, depending on the direction of the vector.
Displacement is often used in kinematics, which is the study of motion without considering the forces that cause the motion. It is a key concept in describing the motion of objects in one, two, or three dimensions.
To know more about displacement visit :
https://brainly.com/question/30087445
#SPJ1
A 509g mass oscillates with an amplitude of 13.0cm on a spring whose spring constant is 20.0N/m . A. Determine the period T= ....... s B. Determine the maximum speed Vmax= ...... m/s C. Determine the total energy Wtotal= ........ J
Period (T):
T = 2π√(m/k)
where m is the mass of the object and k is the spring constant.
Maximum speed (Vmax):
Vmax = Aω
where A is the amplitude of oscillation and ω is the angular frequency, which is given by ω = √(k/m).
Total energy (Wtotal):
W total = 1/2 kA^2
where k is the spring constant and A is the amplitude of oscillation.
Given:
m = 509g = 0.509 kg
A = 13.0 cm = 0.13 m
k = 20.0 N/m
A. Determine the period T:
T = 2π√(m/k)
T = 2π√(0.509 kg / 20.0 N/m)
T = 0.798 s
Therefore, the period of oscillation is 0.798 s.
B. Determine the maximum speed Vmax:
ω = √(k/m) = √(20.0 N/m / 0.509 kg) = 8.05 rad/s
Vmax = Aω = 0.13 m * 8.05 rad/s = 1.05 m/s
Therefore, the maximum speed of the oscillating mass is 1.05 m/s.
C. Determine the total energy W total:
Wtotal = 1/2 kA^2 = 1/2 * 20.0 N/m * (0.13 m)^2 = 0.135 J
Therefore, the total energy of the oscillating mass is 0.135 J.
What is energy ?Energy is a physical property of objects that can be transferred to other objects or converted into different forms, but cannot be created or destroyed. It is often defined as the ability to do work, where work is the product of a force and the distance through which it acts.
Energy exists in many different forms, including mechanical energy associated with motion and position of objects, thermal energy associated with the temperature of objects, electromagnetic energy associated with electric and magnetic fields chemical energy associated with chemical reactions), and nuclear energy associated with the energy released during nuclear reactions.
To know more about Energy visit :
https://brainly.com/question/1932868
#SPJ1
What is the
equivalent
capacitance of this
combination?
(Remember, μ means 10-6.)
HHH
25 μF 15 μF
[?] × 10²¹ F
X
The equivalent capacitance of this combination is 9.375 μF, or 9.375 × 10⁻⁶ F in scientific notation.
What is capacitor ?
A capacitor is an electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by a non-conductive material, called a dielectric. When a voltage is applied to the capacitor, electric charge builds up on the plates, creating an electric field between them. The amount of charge that can be stored on the plates depends on the capacitance of the capacitor, which is determined by the size and spacing of the plates, as well as the properties of the dielectric material.
When capacitors are in series, their effective capacitance is given by:
1/C_series = 1/C_1 + 1/C_2 + ...
In this case, we have two capacitors in series, with capacitances of 25 μF and 15 μF:
1/C_series = 1/25μF + 1/15μF
1/C_series = (15 + 25)/(1525μF²)
1/C_series = 40/(375*μF²)
C_series = 375*μF²/40
C_series = 9.375 μF
Therefore, the equivalent capacitance of this combination is 9.375 μF, or 9.375 × 10⁻⁶ F in scientific notation.
To know more about capacitor visit :-
https://brainly.com/question/27753307
#SPJ1
I'd like help with this question
the given values, we get va = sqrt((350 kg * 9.81 m/s² - 0)))
Since the cable is inextensible, the distance moved by both blocks is the same.
Let's denote the distance moved by both blocks as "d". Then, the distance moved by block A is "1m + d" to the right.
Using conservation of energy, we can write:
(1/2) * ma * va² + (1/2) * mb * vb²= (ma + mb) * g * d
where ma and mb are the masses of blocks A and B, va and vb are their velocities, and g is the acceleration due to gravity.
Since the system is released from rest, va = 0, and we can solve for vb:
(1/2) * mb * vb²= (ma + mb) * g * d
vb²= 2 * (ma + mb) * g * d / mb
vb = sqrt(2 * (ma + mb) * g * d / mb)
Now, we need to find the velocity of block A after it has moved 1m + d to the right. To do this, we can use the equations of motion. Since block A is moving to the right, we take the positive x direction to be to the right. Then, we have:
ma * a = T - fa
where a is the acceleration of block A, T is the tension in the cable, and fa is the frictional force acting on block A due to the incline.
The tension in the cable is the same throughout, so we can write:
T = mb * g
The frictional force fa can be calculated using:
fa = µ * ma * g * cos(theta)
where µ is the coefficient of friction, theta is the angle of the incline, and cos(theta) = 1/sqrt(2) since the incline makes a 45 degree angle with the horizontal.
Substituting these values, we get:
ma * a = mb * g - µ * ma * g / sqrt(2)
Solving for a, we get:
a = (mb * g - µ * ma * g / sqrt(2)) / ma
Now, we can use the equations of motion again to find the final velocity of block A after it has moved 1m + d to the right. We have:
d = (1/2) * a * t²
where t is the time taken by block A to move 1m + d to the right.
Substituting the value of a, we get:
d = (1/2) * [(mb * g - µ * ma * g / sqrt(2)) / ma] * t²
Solving for t, we get:
t = sqrt(2 * d * ma / (mb * g - µ * ma * g / sqrt(2)))
Finally, we can use the equations of motion again to find the final velocity of block A. We have:
1m + d = (1/2) * a * t²
Substituting the values of a and t, we get:
1m + d = (1/2) * [(mb * g - µ * ma * g / sqrt(2)) / ma] * [2 * d * ma / (mb * g - µ * ma * g / sqrt(2))]²
Solving for the final velocity of block A, we get:
va = sqrt((mb * g - µ * ma * g / sqrt(2)) / ma * (1m + d) / 2)
Substituting the given values, we get:
va = sqrt((350 kg * 9.81 m/s² - 0
To know more about velocity visit :-
https://brainly.com/question/80295
#SPJ1
Use the work energy theorem to rank the final kinetic energy of a ball based on the initial kinetic energy Ki, the magnitude of a constant force F on the ball, the displacement of the ball, d and the angle, theta between the displacement of the ball and the net force on the ball. Rank from greatest kinetic energy (1) to least kinetic energy (4).
a) Ki=150J F=10N d=15m theta=90 degrees
b) Ki=300J F=200N d=1.5m theta=180 degrees
c) Ki=200J F=25N d=4m theta=0 degrees
d) Ki=450J F=15N d=30m theta=150 degrees
Answer:
Explanation:
The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. Therefore, we can use this theorem to calculate the final kinetic energy of the ball in each case.
We know that the work done by a constant force is given by the equation W = Fd cos(theta), where F is the magnitude of the force, d is the displacement of the ball, and theta is the angle between the force and displacement vectors.
Using the work-energy theorem, we can write:
W = ΔK = Kf - Ki
where ΔK is the change in kinetic energy, Kf is the final kinetic energy, and Ki is the initial kinetic energy.
We can rearrange this equation to solve for Kf:
Kf = Ki + W = Ki + Fd cos(theta)
a) Kf = 150 J + (10 N)(15 m)cos(90°) = 150 J
b) Kf = 300 J + (200 N)(1.5 m)cos(180°) = 0 J
c) Kf = 200 J + (25 N)(4 m)cos(0°) = 300 J
d) Kf = 450 J + (15 N)(30 m)cos(150°) = 112.5 J
Ranking from greatest to least final kinetic energy:
c) Ki=200J F=25N d=4m theta=0 degrees
a) Ki=150J F=10N d=15m theta=90 degrees
d) Ki=450J F=15N d=30m theta=150 degrees
b) Ki=300J F=200N d=1.5m theta=180 degrees
Please do help me. Nonsense answers will be reported.
An object is thrown horizontally with a speed of 30 m/s from the top of a building. Complete the table below for the indicated time interval. Use g≈ 10 m/s²)
The time that was taken for the movement of the item is observed as 3 seconds.
How do you use the equations of motion?The equations of motion describe the motion of objects in terms of their position, velocity, acceleration, and time.
For the equation;
v = u + at
This equation relates the final velocity (v) of an object to its initial velocity (u), acceleration (a), and time (t). If three of these variables are known, the equation can be rearranged to solve for the unknown variable.
We know that;
v = u - gt
We know that the object would come to rest after being thrown.
0 = 30 - 10t
-30 = - 10t
t = 3 seconds
Learn more about equations of motion:https://brainly.com/question/29278163
#SPJ1
Help with 2 Kirchoff law exercises
1-For the circuit in the figure below, find V₁ and V2.
2-Find the currents and voltages in the following circuit.
Answer:
v1 = 8V; v2=12Vi1=9/7A, i2=13/14A, i3=5/14A, v1=18/7V, v2=52/7V, v3=10/7VExplanation:
You want the voltages in each circuit, and also the currents in the second circuit.
1. Voltage dividerIn this series circuit, the voltage is divided in proportion to the resistance.
v1 = 2/5(20V) = 8V
v2 = 3/5(20V) = 12V
2. Current equationsThe sum of voltages around a loop is 0, so we can write the equations ...
2·i1 +8·i2 = 10
8·i2 -4·i3 = 6
i1 -i2 -i3 = 0
The attachment shows the calculation of the currents. Those are used to find the corresponding voltages.
(i1, i2, i3) = (9/7, 13/14, 5/14)A
(v1, v2, v3) = (18/7, 52/7, 10/7)V
__
Additional comment
A T-circuit as in figure 2 can usually be solved handily by making use of Norton's equivalents for the sources. The left source can be replaced by a 5A current source in parallel with 2Ω. The right source can be replaced by a 1.5A current source in parallel with 4Ω. Then the circuit degenerates to a 6.5A source in parallel with 8/(4+1+2) = 8/7Ω. So, the voltage v2 is ...
v2 = (6.5A)(8/7Ω) = 52/7V
Then {v1, -v3} = {10, 6} -v2 ⇒ (v1, v3) = (18/7, 10/7)
The currents are found by dividing the voltage by the resistance:
{i1, i2, i3} = {18/7, 52/7, 10/7}÷{2, 8, 4} = (9/7, 13/14, 5/14) . . . . as above
Note that these calculations can all be done without the aid of calculator.
Parallel resistors that are multiples of one another can be thought of as some number of resistors in parallel. Here, the 2Ω resistor can be thought of as 4 8Ω resistors in parallel. Similarly, the 4Ω resistor is effectively 2 8Ω resistors in parallel. Thus the parallel combination of 2Ω, 8Ω, and 4Ω is effectively 4+1+2 = 7 8Ω resistors in parallel, or 8/7Ω. No calculator required.
A person with a mass of 55.0 kg jumps straight upwards, gaining 820.0 J of gravitational potential energy. How high did the person jump?
m=55.0 D=820 so were are looking for the velocity ? v= m\d V = 55.0*820 =45100 ...
Derive a formula for the efficiency of the Diesel cycle, in terms of the compression ratio �
1
/
�
2
V 1
/V 2
and the cutoff ratio �
3
/
�
2
.
V 3
/V 2
. Show that for a given compression ratio, the Diesel cycle is less efficient than the Otto cycle. Evaluate the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2.
The theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2 is 0.94.
The efficiency of the Diesel cycle, denoted by η, can be expressed as a function of the compression ratio (r)
and the cutoff ratio (r_c)
as follows:
[tex]η = 1 - 1/(r^(r_c-1))[/tex]
This equation shows that as the compression ratio increases, the efficiency of the Diesel cycle increases.
When comparing the efficiency of the Diesel cycle to that of the Otto cycle, it can be seen that for a given compression ratio, the Diesel cycle is less efficient than the Otto cycle. To evaluate the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2, we can use the equation above to calculate the efficiency as:
[tex]η = 1 - 1/(18^(2-1))[/tex]
η = 1 - 1/18
η = 0.94
Therefore, the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2 is 0.94.
for such more question on theoretical efficiency
https://brainly.com/question/22224978
#SPJ11
What are density and volume?
Simple explanation please
Answer:
Explanation:
Density is a measure of how much mass is contained in a given volume. It is the amount of matter (mass) in a given space (volume). Density is usually expressed in units of mass per unit of volume, such as kilograms per cubic meter (kg/m³) or grams per milliliter (g/mL).
Volume is the amount of space occupied by an object or substance. It is the measurement of the three-dimensional space occupied by an object, substance, or material. Volume can be measured in different units, such as liters (L), cubic meters (m³), or cubic feet (ft³), depending on the scale of the object being measured.
If the pressure exerted on the floor by a box is 200kpa, find the weight of the box given that the bottom of the box has a contact area of 20cm³?
The weight of the box is approximately 0.0408 kg.
What is Pressure?
Pressure is a measure of how much force is applied per unit area of surface. It is a scalar quantity and has units of force per unit area. It is typically expressed in units such as pascals (Pa), atmospheres (atm), or pounds per square inch (psi).
We can use the formula:
pressure = force / area
where pressure is given as 200 kPa and area is given as 20 cm^2. Converting cm^2 to m^2:
20 cm^2 = 20 x 10^-4 m^2 = 0.002 m^2
Substituting the values in the formula and solving for force:
200 kPa = force / 0.002 m^2
force = 200 kPa x 0.002 m^2
force = 0.4 kN (kilonewtons)
The weight of the box is the force acting on it due to gravity, which is given by:
weight = mass x gravitational acceleration
Assuming the box is on the Earth's surface, we can use a value of 9.81 m/s^2 for gravitational acceleration. Solving for mass:
mass = weight / gravitational acceleration
mass = 0.4 kN / 9.81 m/s^2
mass = 0.0408 kg (kilograms)
Therefore, the weight of the box is approximately 0.0408 kg.
Learn more about Pressure from given link
https://brainly.com/question/28012687
#SPJ1
What is the equivalent
capacitance of this
combination?
(Remember, μ means 10-6.)
[?] × 10¹ F
5.2 µF
HH
7 μF 9 μF
10 V
The equivalent capacitance of the combination is 2.2405 μF.
StepsTo find the equivalent capacitance of the combination, we can use the formula:
1/C = 1/C1 + 1/C2 + 1/C3
where C1, C2, and C3 are the capacitances of the three capacitors.
Plugging in the values, we get:
1/C = 1/5.2μF + 1/7μF + 1/9μF
1/C = 0.1923077 + 0.1428571 + 0.1111111
1/C = 0.4462759
C = 1/0.4462759
C = 2.2405 μF (rounded to 4 significant figures)
Therefore, the equivalent capacitance of the combination is 2.2405 μF.
CapacitanceA system's capacitance is its capacity to store an electric charge. The proportion of the electric charge held on a conductor to the difference in potential between the conductors is what is meant by this term.
The farad (F), which is equal to one coulomb per volt, is the unit of capacitance.
learn more about capacitance here
https://brainly.com/question/13578522
#SPJ1
Just after launch from the earth, the space-shuttle orbiter is in the 42 x 153–mi orbit shown. At the apogee point A, its speed is 17246 mi/hr. If nothing were done to modify the orbit, what would its speed be at the perigee P? Neglect aerodynamic drag. (Note that the normal practice is to add speed at A, which raises the perigee altitude to a value that is well above the bulk of the atmosphere.) The radius of the earth is 3959 mi.
If nothing were done to modify the orbit, the speed of the space-shuttle orbiter at the perigee P would be approximately 17085 mi/hr
What is the speed of the space-shuttle?
We can use the principle of conservation of energy to determine the speed of the space-shuttle orbiter at the perigee P.
At the apogee point A, the potential energy of the space-shuttle orbiter is at a maximum, while its kinetic energy is at a minimum. Conversely, at the perigee point P, the kinetic energy is at a maximum, while the potential energy is at a minimum.
The potential energy of the space-shuttle orbiter at any point in its orbit can be calculated as:
U = - G M m / r
where;
G is the gravitational constant, M is the mass of the Earth, m is the mass of the orbiter, and r is the distance between the Earth's center and the orbiter.The kinetic energy of the orbiter can be calculated as:
K = (1/2) m v^2
where;
v is the velocity of the orbiter.Since the sum of the kinetic energy and potential energy remains constant throughout the orbit, we can set the total energy E equal to the sum of the kinetic and potential energies at the apogee point A:
E = U(A) + K(A)
At the perigee point P, the total energy is the same, so we can write:
E = U(P) + K(P)
Equating these two expressions for E, we get:
U(A) + K(A) = U(P) + K(P)
Substituting the expressions for potential and kinetic energy, we get:
G M m / r(A) + (1/2) m v(A)² = - G M m / r(P) + (1/2) m v(P)²
Canceling out the mass of the orbiter and multiplying both sides by -1, we get:
G M / r(A) - (1/2) v(A)² = G M / r(P) - (1/2) v(P)²
Solving for v(P), we get:
v(P) = √[2 G M / r(P) - (1/2) v(A)² + 2 G M / r(A)]
Now we can substitute the given values and solve for v(P):
v(A) = 17246 mi/hr
r(A) = 3959 + 153 = 4112 mi
r(P) = 3959 + 42 = 4001 mi
G M = 1.327 × 10^11 m^3/s^2
Converting units to SI, we get:
v(A) = 7742.6 m/s
r(A) = 6617.6 km
r(P) = 6400.2 km
G M = 3.986 × 10¹⁴ m³/s²
Substituting these values, we get:
v(P) = √[2 (3.986 × 10¹⁴) / (6400.2 × 1000) - (1/2) (7742.6)² + 2 (3.986 × 10¹⁴) / (6617.6 × 1000)]
= 7640.7 m/s
Converting back to miles per hour, we get:
v(P) = 17085 mi/hr (rounded to the nearest mile per hour)
Learn more about conservation of energy here: https://brainly.com/question/27422874
#SPJ1
5. In the diagram below, Aircraft A is flying East and maintaining a groundspeed of 340 kt (a kt = speed of 1 NM / hr). Aircraft B is flying in the same direction as aircraft A but 210 NM ahead, maintaining a ground speed of 280 kt. Aircraft A will catch Aircraft B at Point ‘X’. What distance will Aircraft B have travelled when this event occurs?
For the event to occur, Aircraft B will have travelled a distance of 980 NM.
How to calculate distance?Since Aircraft A is flying East, we can assume that the positive direction is to the East and negative direction is to the West. Let's assume that the position of Aircraft A is x and position of Aircraft B is x + 210 NM.
Let t be the time it takes for Aircraft A to catch up with Aircraft B. At that moment, both aircraft will be at the same position, so:
distance traveled by Aircraft A = distance traveled by Aircraft B
Ground speed x time = Ground speed x time + 210
Using the given ground speeds, we can set up the equation as:
340t = 280t + 210
60t = 210
t = 3.5 hours
Therefore, Aircraft B will have traveled a distance of:
distance = ground speed x time
distance = 280 kt x 3.5 hr
distance = 980 NM
So, Aircraft B will have traveled 980 NM when Aircraft A catches up with it at Point X.
Find out more on Aircraft here: https://brainly.com/question/31362675
#SPJ1
Find the net electric flux through a spherical closed surface of two charges +1.00nc and -3.00nC embedded inside and a +2.00nC outside.
Answer:
Explanation:
To find the net electric flux through a closed surface, we need to apply Gauss's law:
Phi_E = Q_enclosed / epsilon_0
where Phi_E is the electric flux, Q_enclosed is the net charge enclosed by the closed surface, and epsilon_0 is the electric constant.
Let's consider a spherical closed surface of radius R enclosing the charges. We can divide the surface into two regions: inside and outside the sphere.
For the charges inside the sphere, the net charge enclosed is:
Q_enclosed = +1.00 nC - 3.00 nC = -2.00 nC
Therefore, the electric flux through the inner surface of the sphere is:
Phi_E_inside = Q_enclosed / epsilon_0 = (-2.00 nC) / epsilon_0
For the charge outside the sphere, the net charge enclosed is:
Q_enclosed = +2.00 nC
Therefore, the electric flux through the outer surface of the sphere is:
Phi_E_outside = Q_enclosed / epsilon_0 = (2.00 nC) / epsilon_0
The net electric flux through the closed surface is the sum of the electric flux through the inner and outer surfaces:
Phi_E_net = Phi_E_inside + Phi_E_outside = (-2.00 nC) / epsilon_0 + (2.00 nC) / epsilon_0
= 0
Therefore, the net electric flux through the closed surface is zero. This means that the total amount of electric field lines entering the surface is equal to the total amount of electric field lines leaving the surface. This result is consistent with Gauss's law, which states that the net electric flux through a closed surface is proportional to the net charge enclosed by the surface. In this case, since the net charge enclosed is zero, the net electric flux is also zero.
In this circuit, what is the potential difference across C4?
Use the following values in your calculation:
V = 12.0 V
C1 = 3.0 ?F
C2 = 2.0 ?F
C3 = 2.0?F
C4 = 1.0 ?F
C5 = 4.0 ?F
V4 =
The potential difference across C4 can be found using the equation V = V4 - V3. Using the given values, V = 12.0V, C1 = 3.0 ?F, C2 = 2.0 ?F, C3 = 2.0 ?F, C4 = 1.0 ?F, and C5 = 4.0 ?F, we can solve for V4.
V4 = 12.0V + (3.0 ?F + 2.0 ?F + 2.0 ?F + 1.0 ?F) / (1.0 ?F + 4.0 ?F)
V4 = 12.0V + (8.0 ?F / 5.0 ?F)
V4 = 12.0V + 1.6V
V4 = 13.6V
Therefore, the potential difference across C4 is 13.6V - 12.0V = 1.6V.
The potential difference across C4 can be determined using the formula Q = CV. Where Q represents the charge stored in the capacitor, C represents capacitance, and V represents the potential difference across the capacitorTo determine the potential difference across C4, we can use the formula Q = CV. To determine Q, we need to determine the equivalent capacitance of the circuit.
The equivalent capacitance of capacitors in parallel is equal to the sum of their capacitance. The equivalent capacitance of capacitors in series is equal to the reciprocal of the sum of their reciprocals.C1, C2, and C3 are in series, and their equivalent capacitance is given by:C_eq1=1/((1/C1)+(1/C2)+(1/C3))=1/(1/3+1/2+1/2)=3/7 μF{C_eq1=1/((1/C1)+(1/C2)+(1/C3))=1/(1/3+1/2+1/2)=3/7μF}C_eq2 is the equivalent capacitance of C4 and C5 in parallel.C_eq2=C4+C5=1+4=5μF {C_eq2=C4+C5=1+4=5μF}
Now we can determine the equivalent capacitance of the entire circuit.C_eq=C_eq1+C_eq2=3/7+5=38/7μF{C_eq=C_eq1+C_eq2=3/7+5=38/7μF}Now, we can determine the charge stored in the circuit.Q=C_eqV=38/7*12= 65.14μC{Q=C_eqV=38/7*12=65.14μC}To determine the potential difference across C4, we can use the formula Q = CV.V=C4Q/C4= 65.14/1 = 65.14V{V=C4Q/C4=65.14/1=65.14V}Therefore, the potential difference across C4 is 65.14 V.
For more such questions on potential difference
https://brainly.com/question/3535763
#SPJ11
what is one way to increase the momentum of an object
1 . decrease aerodynamics
2. decrease velocity
3. increase friction
4. increase force
Explanation:
Momentum = mv so the most likely way to increase an object's momentum would be to increase its velocity
Person A stands on the ground, train B with proper length L moves to the right at speed 3c/5, and person C runs to the right at speed 4c/5. C starts behind the train and eventually passes it. Let event E1 be "C coincides with the back of the train," and let event E2 be "C coincides with the front of the train." Find the Delta t and Delta x between the events E1 and E2 in the frames of A, B, and C, and show that c2 Delta t2 - Delta x2 is the same in all three frames.
The Delta t and Delta x between the events E1 and E2 in the frames of A, B, and C, and show that c2 Delta t2 - Delta x2 is the same in all three frames. The Space time interval in all frames is [tex]\frac{144}{25}L^2[/tex].
In the following we will find out the time interval and space interval between the two events E1 and E2 with respective to A, B and C.
Simultaneously we will find out space time interval in each case and finally show that they are the same.
In the frame of reference of C
The time interval is the time it takes for ( to Cover the contracted length of B.
with respect to C, B will have a relative velocity Ux' = (-5/13)C (we had already found out it.Only the sign changes)
Then the contrasted length of B with respect to C.
would be L' = [tex]L\sqrt{1 - \frac{Ux^2}{C^2}} = L\sqrt{1 - \frac{25}{169}}[/tex]
L' = (12/13)L
So dt = L'/un\x' =(12/13)L / (-5/13)C = (12/5)(L/C)
dx =0 as E1, and E2 occurs at the same point with respect to C. Now space time Interval is Cdt^2 = dx^2 =
[tex]C^2 \frac{144}{25}\frac{L^2}{C^2}-0 = \frac{144}{25}L^2[/tex]
The quantity of time between two given instances is referred to as time interval. In other words, it is the amount of time that has surpassed among the beginning and end of the event. it is also called elapsed time. interval of time is measured in special units. every unit describes a one of a kind quantity of time. some units are better appropriate to specific durations of time.
As an instance, if you were baking a cake within the oven, you will select to measure the time in minutes or perhaps in hours. in case you were calculating the time on your birthday from a particular date, you will choose to measure the time in days, weeks, or months (relying on how far away it became).
To learn more about Time interval visit here:
brainly.com/question/28210196
#SPJ4
If pulse 1 were reflected from a wall, which one of the patterns above would represent the reflected pulse? A) 1 B) 2 C) 3 D) 4 E) 5
If pulse 1 is reflected from a wall, pattern 2 would represent the reflected pulse. This is because when a wave is reflected from a fixed end, its amplitude is inverted. So, pattern 2 represents the reflection of pulse 1 from a fixed end.
A pulse is a short burst of energy that travels through space or matter. These bursts of energy can come in many different forms, including sound waves, light waves, and even electromagnetic radiation. In the context of waves, a pulse refers to a single disturbance that propagates through a medium. The reflection of waves refers to the behavior of waves that encounter a barrier or a discontinuity in a medium that causes them to return to their original medium. When waves are reflected, their direction of motion changes, and they experience a change in amplitude, phase, and polarization.
The amplitude of the reflected wave is related to the amplitude of the incident wave, as well as to the reflectivity of the medium. The reflection of waves is an essential phenomenon in many fields of science and engineering. For example, it is essential in optics, where it is used to form images in mirrors and lenses. It is also important in acoustics, where it is used to analyze the characteristics of sound waves. In addition, the reflection of waves is a critical aspect of the design of structures such as bridges and buildings, where it can help to reduce the impact of seismic waves during an earthquake.
To learn more about Amplitude ;
https://brainly.com/question/3613222
#SPJ11
I actually have 3 questions. >33
1. Write about a time when you felt very cold and did something to make yourself feel warm, or a time when you felt hot and did something to cool yourself down. What caused the heat to transfer from one place to another place? How did this transfer of heat cause a change in temperature?
2. Why is the temperature of the liquid in the flask on the previous page measured when the liquid in the thermometer has stopped rising?
3. How can the thermometer in the flask on the previous page be used to demonstrate the relationship between heat transfer and kinetic energy? Explain.
When you contact anything hot, the heat is transmitted from the object to your hand, making it feel hot. When you contact something cold, heat is transmitted from your hand to the object, making it feel chilly.
When heated the molecules of the liquid move faster causes them to get a little further apart?when heated, the molecules of the liquid in the thermometer move faster, causing them to get a little further apart. this results in movement up the thermometer. when cooled, the molecules of the liquid in the thermometer move slower, causing them to get a little closer together.
When the liquid in the thermometer is heated, the molecules move quicker, forcing them to move wider apart. This causes the thermometer to rise. When the liquid in the thermometer is chilled, the molecules travel slower, leading them to get closer together.
Learn more about heat
https://brainly.com/question/1429452
#SPJ1
For small bodies with high thermal conductivity, the features surrounding the medium that favor lumped system analysis
The medium should be a poor conductor of heat
The medium should be motionless
Small bodies with high thermal conductivity, the medium should be a poor conductor of heat and should be motionless in order to favour lumped system analysis.
For small bodies with high thermal conductivity, the features surrounding the medium that favor lumped system analysis are that the medium should be a poor conductor of heat and the medium should be motionless.
In other words, for small bodies with high thermal conductivity, the thermal energy will stay confined within the boundaries of the medium if it is a poor conductor of heat and the medium is not moving. This allows the energy to be spread evenly throughout the system, which is why lumped system analysis can be used.
Lumped system analysis is a method used to analyse heat transfer and energy flow within a system. It assumes that thermal energy is transferred across a body of homogeneous material and can be used to calculate the temperature of an object at different points in the body.
The effectiveness of this method relies on the heat capacity of the medium and its thermal conductivity, which is why it is most suitable for small bodies with high thermal conductivity.
For large bodies, or bodies with low thermal conductivity, distributed system analysis is typically used instead of lumped system analysis. This method assumes that the body has different thermal properties at different points, and calculates the temperature at those points based on their respective thermal properties.
For similar questions on thermal conductivity
https://brainly.com/question/29419715
#SPJ11
the frequency of two alleles in a gene pool is 0.19 (a) and 0.81(a). assume that the population isin hardy-weinberg equilibrium.
Based on the information given, we can assume that there are two alleles for a particular gene in a population: allele "A" with frequency of 0.19 and allele "a" with frequency of 0.81.
What is the frequency?
If the population is in Hardy-Weinberg equilibrium, then the allele frequencies will remain constant from generation to generation.
According to the Hardy-Weinberg equation, the expected genotype frequencies can be calculated as follows:
AA genotype frequency = p^2 = (0.19)^2 = 0.0361Aa genotype frequency = 2pq = 2(0.19)(0.81) = 0.3082aa genotype frequency = q^2 = (0.81)^2 = 0.6561
What is genotype?
These genotype frequencies should remain constant in future generations as long as the assumptions of the Hardy-Weinberg equilibrium are met, such as random mating, no migration, no mutation, no natural selection, and large population size.
To know more about genotype, visit:
https://brainly.com/question/29156144
#SPJ1
