A small part of a current loop consisting of a very, very large triangular conductor in the x-y plane is shown below, with the current i=39.30 A.



12 10 4 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 x (cm)



Calculate the magnitude of the B-field at point 'p'.

Answer:

51.54 m/s

Explanation:

Applying,

Law of conservation of momentum,

Total momentum before collision = Total momentum after collision

mu+m'u' = mv+m'v'.................... Equation 1

Where m = mass of the head of the golf club, m' = mass of the gulf ball, u = initial velocity of the head of the gulf club, u' = initial velocity of the gulf ball, v = final velocity of the head of a gulf club, v' = final velocity of the gulf ball

From the question,

Given: m = 151 g = 0.151 kg, u = 43.9 m/s, m' = 46 g = 0.046 kg, u' = 0 m/s (at rest), v = 28.2 m/s

Substitute these values into equation 1

0.151(43.9)+0.046(0) = 0.151(28.2)+0.046(v')

solve for v'

6.6289+0 = 4.2582+0.046v'

0.046v' = 6.6289-4.2582

0.046v' = 2.3707

v' = 2.3707/0.046

v' = 51.54 m/s

Answer:

718.02N is the answer to the question

Answer:

1)  ΔE = -800 J, 2) ΔE = 200 J, 3)  ΔE = -200 J, 4) ΔE = 800 J

Explanation:

For this exercise let's use the first law of thermodynamics

          ΔE = Q + W

Where we will apply this expression to several cases

1) output Q = 500 J and does work of W = 300 J.

The two processes involve an energy output

         ΔE = - 500 - 300

         ΔE = -800 J

Therefore, the internal energy of the gas decreases by this amount,

2) enter Q = 500J and do work of W = 300 J

         Positive heat is added and does negative work

         ΔE = 500 - 300

         ΔE = 200 J

3) they leave Q = 500 J and do (work on the gas) W = 300J

negative heat and positive work come out

          ΔE = -500 + 300

          ΔE = -200 J

4) heat enters Q = 500 J, work on gas W = 300 J

both positive

         ΔE = 500 + 300

         ΔE = 800 J

Answer:

Explanation:

The Law of Momentum Conservation for us has the equation

[tex][m_rv_r+m_gv_g]_b=[m_rv_r+m_gv_g]_a[/tex] and filling in:

[tex][(.50)(5.0)+(.50)(0)]=[(.50)(2.0)+(.50)v_g][/tex] and

2.5 = 1.0 + .50v and

1.5 = .50v so

v = 3 m/s

The final speed of the green ball is 3m/s. This can be calculated by the law of conservation of momentum. Thus, the correct option is D.

The principle of the law of conservation of momentum states that if any two objects undergo collision, then the total momentum of the objects before and after the collision will be the same if there is no external force acting on the colliding objects.

The Law of Conservation of Momentum has the equation which is:

m₁ × u₁ + m₂ × u₂ = m₁ × v₁ + m₂ × v₂

where, m₁ = mass of object 1,

u₁ = initial velocity of object 1 before collision,

m₂ = mass of object 2,

v₁ = final velocity of object 1 after collision,

v₂ = final velocity of the object 2 after collision.

0.50 × 5 + 0.50 × 0 = 0.50 × 2 + 0.50 × v₂

2.5 + 0 = 1.0 + 0.50 × v₂

2.5 - 1.0 = 0.50 × v₂

1.5 = 0.50 × v₂

1.5/ 0.5 = v₂

v₂ = 3m/s

Therefore, the correct option is D.

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ2

Answer:

a

Explanation:

because it's need someone moving it so it can move somewhere else

0.5Ω

Since different currents are passing through the resistors, then the resistors are most probably connected in parallel. This also means that the same voltage will pass across them.

Using Ohm's law, the voltage across a resistor in a circuit is given by;

V = I(R + r)            -----------(i)

For the 1ohm resistor, the voltage across it is given by;

Where;

I = current passing through the 1 ohm resistor = 0.6A

R = resistance of the 1 ohm resistor = 1Ω

r = internal resistance of the cell = r

Substitute these values into equation (i) as follows;

V = 0.6(1 + r)                 -------------------(ii)

For the 4.0ohm resistor, the voltage across it is given by;

Where;

I = current passing through the 4.0 ohms resistor = 0.2A

R = resistance of the 4.0 ohms resistor = 4.0Ω

r = internal resistance of the cell = r

Substitute these values into equation (i) as follows;

V = 0.2(4.0 + r)                 -------------------(iii)

Now solve equations (ii) and (iii) simultaneously;

V = 0.6(1 + r)

V = 0.2(4.0 + r)

Substitute the value of V in equation (ii) into equation (iii). Therefore, we have;

0.6(1 + r) = 0.2(4.0 + r)

Solve for r

0.6 + 0.6r = 0.8 + 0.2r

0.6r - 0.2r = 0.8 - 0.6

0.4r = 0.2

r = [tex]\frac{0.2}{0.4}[/tex]

r = 0.5

Therefore, the internal resistance of the cell is 0.5Ω

If two vectors are represented both in magnitude and direction by the two adjacent sides of a triangle taken in an order, then their resultant is given by the third side taken in the reverse order.

Resultant vector :

                         R = sqrt of A^2 + B^2 + 2ABcosθ

given :

          A = 200 units

          B = 300 units

          θ = 30 degrees

∴ R = sqrt of 200^2 + 300^2 + 2(200)(300)cos35

the answer is 477.805656

Answer:

Explanation:

Use the one-dimensional equation

[tex]v_f=v_0+at[/tex] where v is the final velocity, v0 is the initial velocity, a is the acceleration, and t is the time it takes to reach that final velocity. We are solving for t. Filling in the other values:

0 = 28 + (-6.4)t and

-28 = -6.4t so

t = 4.4 seconds

Answer:

4.4

Explanation:

Answer:

hey are you ok!?!?!?!

Explanation:

Is Angie your Dad new gf or wife???

Answer:

:(

Explanation:

u ok?

running away from problems only makes things worse. Your teaching urself to run. but I dont blame u

anyway hope u find what ur looking for out there!!

Answer:

PLEASE MARK ME AS A BRAINLIEST

Explanation:

There are slight variations in the value of g about earth's surface. These variations result from the varying density of the geologic structures below each specific surface location. They also result from the fact that the earth is not truly spherical; the earth's surface is further from its center at the equator than it is at the poles. This would result in larger g values at the poles. As one proceeds further from earth's surface - say into a location of orbit about the earth - the value of g changes still.

Answer:

25 m/s

Explanation:

1 km/h = .277778 m/s, so 90 x .277778 = 25

Answer:

A comet

Explanation:

The picture is of an elliptical orbit of a comet. You can tell it is a comet because of the tail. Also, I just took the test and it was a comet.

The statement which describes the possible interaction(s) between two objects caused by the electric, magnetic, or gravitational force between them is:

Gravitational forces only cause objects to be attracted to each other, and magnetic and electric forces can cause objects to

Force can be defined as the push or pull on an object with mass that causes it to change its velocity

So therefore, the statement which describes the possible interaction(s) between two objects caused by the electric, magnetic, or gravitational force between them is:

Gravitational forces only cause objects to be attracted to each

other, and magnetic and electric forces can cause objects to

Learn more force:

https://brainly.com/question/14839816

#SPJ1

Answer:

It depends on the medium

Explanation:

2021 edge

The energy of a sound wave decreases as it travels through a medium to another medium. Thus, the correct option is D.

A sound wave is the pattern of disturbance which is caused by the energy which is travelling away from the source of the sound in that medium. Sound waves are the longitudinal waves. This means that the propagation of these vibration of particles is parallel to the energy which this wave propagation direction has. When the atoms in the medium are set in vibration then they move back and forth in a direction. This continuous to occur in back and forth motion resulting in a high-pressure and a low-pressure region in the medium and thus propagating sound.

Sound wave is the physical vibration wave which travel through the air to reach the ears of organisms. Sound energy is the result when force makes an object to vibrate. A wave can lose energy as it travels through a medium because the medium can also absorb the energy from the wave. The medium changes some of the acoustic energy of the sound wave into heat energy.

Therefore, the correct option is D.

Learn more about Sound wave here:

https://brainly.com/question/21995826

#SPJ2

Answer:

Mass = 52.63 kilograms

Explanation:

Given the following data;

Acceleration due to gravity = 3.8 m/s²

Weight = 200 N

To find mass;

Mathematically, the weight of a physical object is given by the formula;

Weight = mass * acceleration due to gravity

Substituting into the formula, we have;

200 = mass * 3.8

Mass = 200/3.8

Mass = 52.63 kg

Explanation:

distance = velocity * time

d = 37.9 * 118

distance = 4472.2

Answer:

Middle layer, density increases with depth as pressure increases

Explanation:

The Earth's mantle is the middle layer of the earth. It is the largest layer of the earth consisting of about 83 % of the earth's volume and continues to a depth of 2900 km. Also, the mantle is hot and made of solid rock. It is hot since it is close to the core and its pressure and density increases with depth causing it to be more solid.

So, the Earth's mantle is the middle layer, density increases with depth as pressure increases.

Answer:ur mom

Explanation:because

Answer:

Let the power delivered by the sound wave be 'P'

Intensity by definition is the power delivered per unit area.

i.e. I =

dA

dP

;

In spherical polar coordinate system dA = r

2

Ω

I =

r

2

Ω

dP

;

I ∝

r

2

1

So if distance increases 3 fold. The Intensity becomes

9

1

times the initial

Answer:

Explanation:

Let's analyze the situation presented in order to know which answer is correct.

When the stick collides with the puck, it exerts a force for a certain time and discants. / After this time the horizontal force decreases to zero and the disk continues to move by the action of the initial velocity on the x axis and the acceleration of gravity on the y axis.

Therefore, after the collision, the only force that acts on the disk is the gravitational attractive force (WEIGHT), directed on the axis and in a negative direction.

The correct answer is:

C)           Since there is no frictional force exerted on the puck, a normal force is not exerted on the puck, but the gravitational force is exerted on the puck

Answer:

Work is said to be done when a force applied to an object moves that object. We can calculate work by multiplying the force by the movement of the object.

Answer:

Work is done by a force on an object if (i) a force acts on the object and (ii) the object is displaced from its original position

Answer:

v = 37.59 km/h

Explanation:

The question says, "how fast in km / h did usain bolt run at the berlin world championship in 2009 to break the world record for the 100m sprint in 9.58".

Distance, d = 100 m = 0.1 km

Time, t = 9.58 s = 0.00266 h

We need to find the speed of the Usain Bolt. We know that,

Speed = distance/time

So,

[tex]v=\dfrac{0.1}{0.00266}\\\\v=37.59\ km/h[/tex]

So, the required speed is equal to 37.59 km/h.

Answer:

the rotational kinetic energy of the disk is 5,133.375 J

Explanation:

Given;

mass of the disk, m = 27 kg

radius of the disk, r = 1.3 m

angular speed, ω = 15 rad/s

The rotational kinetic energy of the disk is calculated as;

[tex]K.E_{rot} = \frac{1}{2}I \omega^2\\\\ where;\\I \ is \ moment \ of \ inertia\\\\K.E_{rot} = \frac{1}{2} \times (mr^2) \times \omega ^2\\\\ K.E_{rot} = \frac{1}{2} \times (27\times 1.3^2) \times \ 15^2\\\\K.E_{rot} = 5,133.375 \ J[/tex]

Therefore, the rotational kinetic energy of the disk is 5,133.375 J

Answer:

weight of rod =weight of liquid displaced

mass of the rod ×g =mass of liquid displaced ×g

(g cancelled out)

mass of the rod =mass of liquid displaced

density of rod ×volume of rod =density of liqiud ×volume of liquid displaced

O×cross section area of rod ×height of rod =density of liquid ×Cross section area of rod ×height of rod under the surface

O×L=density of liquid ×(L-h)

then density of liquid =OL/(L-h) shown as required

The density of the liquid is given by =OL/L − h

Density is the ratio of mass of an object and its volume.

According to the Archimedes principle, weight of rod = weight of liquid displaced

mass of the rod ×g =mass of liquid displaced ×g

So, mass of the rod =mass of liquid displaced

Mass in terms of density is substituted,

density of rod × volume of rod =density of liquid ×volume of liquid displaced

O× cross section area of rod ×height of rod =density of liquid ×Cross section area of rod ×height of rod under the surface

O×L=density of liquid ×(L-h)

Then, density of liquid =OL/(L-h).

Learn more about density.

https://brainly.com/question/9215083

#SPJ2

Answer:

Final velocity = 60 m/s

Distance travelled = 9000 m

Explanation:

Applying,

For Final velocity,

v = u+at ............... Equation 1

Where v = final velocity, u = initial velocity, a = acceleration, t = time.

From the question,

Given: u = 0 m/s(at rest), a = 0.2 m/s², t = 5 minutes = (5×60) = 300 s

Substitute these values into equation 1

v = 0+0.2(300)

v = 60 m/s.

Also for distance,

Applying,

s = ut+1/2at²................ Equation 2

Where s = distance travelled.

subtitute thes values above into equation 2

s = (0×300)+(0.2×300²)/2

s = 9000 m

Answer:

Its Letter C Because Gravity's characteristic is to draw objects (including us) toward its center (which in this case, Earth).