The volume difference between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution is 538.56 ml.
What is the volume difference?To calculate the volume difference, we need to first calculate the total volume of the solution and the volume of each component in the solution.
The total volume of the solution is the sum of the volumes of ethanol and water:
Total volume = volume of ethanol + volume of water
Total volume = 736.0 ml + 694.0 ml
Total volume = 1430.0 ml
To calculate the volume of ethanol in the solution, we need to convert the mass of ethanol to volume using its density:
Mass of ethanol = volume of ethanol x density of ethanol
Volume of ethanol = mass of ethanol / density of ethanol
Volume of ethanol = (9.186 mol/L) x (0.7893 g/ml) x (736.0 ml) / (46.07 g/mol)
Volume of ethanol = 197.44 ml
Similarly, we can calculate the volume of water in the solution:
Volume of water = 694.0 ml
Therefore, the actual volume of the solution is the sum of the volumes of ethanol and water:
Actual volume of solution = volume of ethanol + volume of water
Actual volume of solution = 197.44 ml + 694.0 ml
Actual volume of solution = 891.44 ml
The volume difference is the difference between the total volume of ethanol and water that were mixed and the actual volume of the solution:
Volume difference = Total volume - Actual volume of solution
Volume difference = 1430.0 ml - 891.44 ml
Volume difference = 538.56 ml
Learn more about volume difference here: https://brainly.com/question/21305745
#SPJ1
write a balanced chemical equation, including physical state symbols, for the decomposition of solid mercury(ii) oxide (hgo) into liquid mercury and gaseous dioxygen.
The balanced chemical equation for the decomposition of solid Mercury (II) oxide (HgO) into liquid Mercury and gaseous Dioxygen is:
[tex]HgO (s) \rightarrow Hg (l) + O_2 (g)[/tex]
Mercury (II) oxide, HgO, is a stable compound that may be decomposed by heating it to generate mercury metal and oxygen gas.
This reaction may be classified as a thermic decomposition reaction because it is initiated by heat. The equation is balanced as there is one atom of mercury on the left-hand side and one on the right-hand side.
Similarly, there are two atoms of oxygen on the left-hand side and two on the right-hand side. The physical state of HgO is solid, whereas the physical state of Hg and [tex]O_2[/tex] is liquid and gaseous, respectively.
To learn more about balanced chemical equation refer - https://brainly.com/question/14228953
#SPJ11
does the buffering system appear to be neutralizing all acidity associated with atmospheric carbon dioxide
The buffering system does not appear to neutralize all acidity associated with atmospheric carbon dioxide. Acid-base buffering is a physiological mechanism that maintains the pH of a solution within a certain range by resisting changes in the acidity or basicity of the solution.
It achieves this by utilizing a weak acid and its corresponding weak base, which can accept or donate H+ ions as required.
The buffering system reacts with the atmospheric carbon dioxide to form carbonic acid. The carbonic acid dissociates into hydrogen ions and bicarbonate ions, which are regulated by the lungs and kidneys. When the concentration of atmospheric carbon dioxide increases, it increases the concentration of hydrogen ions in the blood, reducing the pH of the blood.
As a result, the body increases ventilation to eliminate excess carbon dioxide, returning the pH to its normal range. The buffering system does not neutralize all of the atmospheric carbon dioxide acidity; instead, it helps to maintain the pH of the body within a certain range.
Learn more about acid: https://brainly.com/question/25148363
#SPJ11
Give the approximate bond angle for a molecule with an octahedral shape. 109.5° 180° 120 O 105° 90° QUESTION 3 What is the hybridization of the orbitals on carbon in C2H4?
1. The approximate bond angle for a molecule with an octahedral shape is 90 degree. so, option (e) is correct.
2. The hybridization of the orbitals on carbon in C2H4 is SP2 hybridization.
The octahedral shape of molecules is defined as the shape of molecules where six atoms or ligands or groups of atoms are arranged in a systematic way around a central dogma or atom. The Octahedral Shape of Molecules contains eight faces and the band angel is 90 degree. It consists of two square pyramids back to back each square pyramid with four faces.
In sp² hybridization is defined as the hybridization where one s orbital and two p orbitals hybridize to form three sp² orbitals each of this consisting of 33% s character and 67% p character. SP2 hybridization is required whenever an atom is surrounded by three groups of electrons.
To learn more about octahedral shape
https://brainly.com/question/30160815
#SPJ4
The complete question is,
1. Give the approximate bond angle for a molecule with an octahedral shape.
a. 109.5°
b. 180°
c. 120
d. 105°
e. 90°
2. What is the hybridization of the orbitals on carbon in C2H4?
Did you know that dihydrogen monoxide (DHMO), hydric acid, kills over 4,000 people a year and can injure or seriously hurt thousands more? It’s in the food you will eat today and in everything you drink. Yet the government does not outlaw this dangerous chemical compound. Links to an external site. What can we do to fix this?
Water, a naturally occurring and vital component for life on Earth, is really known chemically as dihydrogen monoxide (DHMO). When consumed in moderation, it is not dangerous.
Dihydrogen monoxideThe claim you made appears to be a well-known internet hoax that has been circulated for a while. It is frequently used in jokes and satire to highlight how quickly false information and fear-mongering can spread.
It is crucial to rely on reliable sources and scientific facts when analyzing information, especially when it comes to health and safety, to address your concern. To assist people in recognizing and avoiding misleading or inaccurate information, it is also crucial to encourage critical thinking and media literacy.
In other words, since dihydrogen monoxide is a fundamental substance required for existence, there is nothing to "repair" in regard to it. Instead, in order to assure accurate and trustworthy knowledge, we should concentrate on information verification and the advancement of scientific literacy.
learn more about dihydrogen monoxide here
https://brainly.com/question/29094259
#SPJ1
While the composition of oxygen and nitrogen in air does not change with altitude, the decreasing temperature at high altitude does change the percent of air that is composed of H2O. Assuming constant relative humidity, which of the following can be asserted about the total grams of H2O in a given volume of air at 3000 m above sea level versus at sea level?
A. Assuming constant relative humidity means that air has roughly the same mass of H2O per unit volume at 3000 m above sea level.
B. Whether air at very high altitude has more or less mass of H2O per unit volume than it does at sea level depends on the temperature at high altitude.
C. Air has significantly more mass of H2O per unit volume at 3000 m above sea level.
D. Air has significantly less mass of H2O per unit volume at 3000 m above sea level.
The correct assertion is that whether air at very high altitude has more or less mass of H2O per unit volume than it does at sea level depends on the temperature at high altitude and the correct option is option B.
As the altitude increases, the temperature decreases. The amount of water vapor that air can hold is dependent on its temperature, with colder air being able to hold less moisture.
Therefore, at higher altitudes with lower temperatures, the air has a reduced capacity to hold water vapor. This means that the amount of water vapor in a given volume of air at high altitude will be less than at sea level, assuming constant relative humidity.
Thus, the ideal selection is option B.
Learn more about Composition of air, here:
https://brainly.com/question/28704548
#SPJ12
How many kilograms are there in 81. 2 Mg? Express your answer in scientific notation
As there are 1,000,000 kg in 1 Mg, we must multiply by 1,000,000 to convert from Mg (megagrams) to kilogrammes. Therefore:
8.12 × 107 kg or 81.2 Mg is equal to 81.2 x 1,000,000 kg.
8.12 x 107 kilos, or in scientific notation, are contained in 81.2 Mg.
, I apologize for my mistake in the previous response. The conversion from Mg to kg is indeed done by multiplying by 1,000,000. Thank you for providing the correct calculation and explanation. The answer is:
81.2 Mg = 81.2 x 1,000,000 kg = 8.12 x 10^7 kg
Expressed in scientific notation, there are 8.12 x 10^7 kilograms in 81.2 Mg.
8.12 x 107 kilos, or in scientific notation, are contained in 81.2 Mg.
8.12 x 107 kilos, or in scientific notation, are contained in 81.2 Mg.
learn more about kilogrammes here:
https://brainly.com/question/5305768
#SPJ4
what needs to increase in order to make a substance more soluble?
By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.
A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.
learn more about solubility here:
https://brainly.com/question/29857840
#SPJ4
Ian noticed that during a reaction the beaker containing his reactants got very cold. What kind of reaction is this?
Answer: Endothermic Reaction
Explanation:
It is Endothermic Reaction because, during Endothermic reaction, heat is absorbed from the surrounding. It is cold because, due to the reaction, the heat is absorbed, lowering the temperature of the mixture in the beaker, making the reactants cold.
Review these definitions, and make sure to not get confused between Exothermic and Endothermic reactions.
Exothermic Reaction: A chemical reaction where energy is released.
Endothermic Reaction: A chemical reaction where energy is absorbed from the environment.
identify the phrases that generally apply to molecular compounds.
a. contain metals and nonmetals
b.are often gases or liquids
c. have low melting points
d.contain ionic bonds
e. use covalent bonding
The phrases that applied to molecular compounds are often gases and liquids, which have low melting points and and use covalent bonding. So. options (b), (c) and (e) are correct.
Molecular compounds are defined as the chemical compounds that take the form of discrete molecules. The molecular compounds are very different from ionic compounds like sodium chloride. These compounds are held together by covalent bonds. Molecular compounds are usually gases and liquids at room temperature due to their low melting and boiling points. Some molecular compounds are solids at room temperature but they tend to be soft and flexible. The boiling points of these compounds are also low due to weak intermolecular forces because it does not take that much energy to separate and vaporize the molecular molecules.
To learn more about Molecular compounds
https://brainly.com/question/14018732
#SPJ4
Think about how you would expect the temperatures in the star to vary between each of the layers shown, and use this to sort the following elements in order of increasing temperature at which they burn in a nuclear fusion reaction.
Helium - Carbon - Oxygen - Hydrogen - Neon - Sulfur
The correct order of the elements will be Hydrogen, Helium, Neon, Oxygen, Carbon, Sulfur.
What is nuclear fusion?
A reaction known as nuclear fusion occurs when two or more atomic nuclei fuse to create new atomic and subatomic particles. Energy is released or absorbed depending on how much mass there is between the reactants and products.
The temperature inside a star fluctuates depending on the layers in which nuclear fusion reactions occur. In this problem, students are asked to sort the given elements in order of increasing temperature at which they burn in a nuclear fusion reaction.
To do so, it is necessary to determine the order in which the layers of the star are located. This can be accomplished by considering the temperature required for nuclear fusion to take place in each layer. The following is a list of elements arranged in order of increasing temperature required for nuclear fusion:
Hydrogen - Helium - Neon - Oxygen - Carbon - Sulfur.
Learn more about nuclear fusion on:
https://brainly.com/question/17870368
#SPJ11
what is the main psychoactive ingredient in amanita muscaria?
The main psychoactive ingredient in Amanita muscaria is muscimol.
Amanita muscaria is a type of mushroom that is known for its hallucinogenic properties. Muscimol is a potent psychoactive compound that acts as an agonist for the neurotransmitter GABA, which is the primary inhibitory neurotransmitter in the central nervous system. When muscimol binds to GABA receptors, it enhances the inhibitory effects of GABA, leading to feelings of relaxation, euphoria, and altered perceptions of reality. In addition to muscimol, Amanita muscaria also contains other psychoactive compounds, including ibotenic acid, which is a precursor to muscimol and can also cause some hallucinogenic effects.
To know more about hallucinogenic effects, here
brainly.com/question/11912861
#SPJ4
isotopes are different forms of an element that have different ______.
Isotopes are different forms of an element that have different atomic masses. The number of protons in each atom of an element will remain the same, but isotopes of an element will have different numbers of neutrons, leading to different atomic masses.
Isotopes are different forms of an element that have different numbers of neutrons in their nuclei. The number of neutrons in an atom can vary from one to several, depending on the element. Isotopes are atoms of an element that differ in the number of neutrons present in their nucleus. The atomic number of an element is determined by the number of protons present in the nucleus. However, the isotopes of the same element differ in their mass numbers. The atomic mass of an element is determined by the number of protons and neutrons present in the nucleus.
The atomic number of an atom is the sum of the number of protons in the nucleus and the number of electrons in a neutral (non-ionized) atom. Each atomic number designates a particular element, but not an isotope; the number of neutrons in an atom of a given element can vary widely. Each isotope of an element has a particular mass number, which is determined by the number of nucleons (both protons and neutrons) in the nucleus. Therefore, the isotopes of an element have different atomic masses.
Isotopes can be radioactive or stable, depending on the number of neutrons present in the nucleus. For instance, carbon-14 is a radioactive isotope of carbon, while carbon-12 is a stable isotope.
For more such questions on Isotopes , Visit:
https://brainly.com/question/14220416
#SPJ11
The concentration of barium ion, Ba2+, in solution is 0.010 M.a) What concentration of sulfate ion, SO42–, is required to begin precipitation of BaSO4?b) When enough SO42– has been added so that the concentration of sulfate ion in solution reaches 0.015 M, what concentration of Ba2+ will remain in solution?
The balanced chemical equation for precipitation of [tex]BaSO4[/tex] is:
[tex]Ba2+ (aq) + SO42- (aq) → BaSO4 (s)[/tex]. The concentration of Ba2+ remaining in solution is 7.3 × 10^-9 M.
a) To begin precipitation of BaSO4, the ion product of Ba2+ and SO42- must reach the solubility product constant, Ksp, for BaSO4. The Ksp for BaSO4 is[tex]1.1 * 10^{-10}[/tex]. [tex]Ksp = [Ba2+][SO42-][/tex] , [tex]1.1 * 10^{-10} = (0.010 M)(x M)[/tex],[tex]x = 1.1 * 10^{-8} M[/tex]. Therefore, concentration of sulfate ion required to begin precipitation of BaSO4 is [tex]1.1 * 10^{-8} M[/tex].
b) Once concentration of SO42- in solution reaches 0.015 M, the ion product of Ba2+ and SO42- will exceed the Ksp for BaSO4, and precipitation will occur until equilibrium is established. [tex][Ba2+][SO42-][/tex] = (0.010 M)(1.1 × 10^-8 M) = 1.1 × 10^-10.
Let x be the concentration of Ba2+ that remains in solution after precipitation: [tex]Ksp = [Ba2+][SO42-][/tex] ,[tex]1.1 * 10^{-10} = (x M)(0.015 M),[/tex] [tex]x = 7.3 * 10^{-9 }M.[/tex]
To know more about precipitation, here
brainly.com/question/18109776
#SPJ4
An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble
An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.
Therefore, option b. NaOH is correct option.
An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.
Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.
As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.
for such more question on amine
https://brainly.com/question/9631835
#SPJ11
Write a chemical equation for HNO3(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answer.Part CWrite a chemical equation for HF(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answe
Part A The chemical equation for HNO3 showing it is acid is:-
HNO3 (aq) → H+ (aq) + NO3- (aq)
The phases are HNO3 (aq) = aqueous solution, H+ (aq) = aqueous solution and NO3- (aq) = aqueous solution.
Part B The chemical equation for HF showing it is acid is:-
HF (aq) → H+ (aq) + F- (aq)
The phases are HF (aq) = aqueous solution, H+ (aq) = aqueous solution, and F- (aq) = aqueous solution.
HNO3 (aq) is an acid according to the Arrhenius definition because the chemical substance HNO3 (nitric acid) dissociates in an aqueous solution to release hydrogen ions (H+).
HF (aq) is an acid according to the Arrhenius definition because the chemical substance HF (hydrofluoric acid) dissociates in an aqueous solution to release hydrogen ions (H+).
Learn more about Arrhenius:
https://brainly.com/question/14739712
#SPJ11
The student decides to determine the molarity of the same Na2CO3 solution using a second method. When Na2CO3 is dissolved in water, CO3 ^2−(aq) hydrolyzes to form HCO3 ^−(aq), as shown by the following equation.CO3 2−(aq) + H2O(l) HCO3 −(aq) + OH−(aq) Kb = [HCO3^ -][OH^- ]/ [CO3^2- ] - - - = 2.1 × 10^−4explain how the student could use the measured value in part (f)(i) to calculate the initial concentration of co3-2 (aq). (do not do any numerical calculations.)
To calculate the initial concentration of CO32- (aq), the student can use the measured value from part (f)
(i) to calculate the equilibrium concentration of HCO3- (aq) and OH- (aq)
according to the equilibrium expression: Kb = [HCO3-]eq [OH-]eq / [CO32-]eq.
The student can then use the equilibrium concentrations to calculate the initial concentration of CO32- (aq) by solving the equilibrium expression for [CO32-]eq.
The initial concentration of CO32- (aq) is equal to the sum of the equilibrium concentrations of HCO3- (aq) and OH- (aq).
to know more about equilibrium refer here:
https://brainly.com/question/30807709#
#SPJ11
19. which sample, when dissolved in 1.0 liter of water, produces a solution with the lowest boiling point?
The sample with the lowest boiling point when dissolved in 1.0 liter of water is sodium chloride (NaCl). Sodium chloride is a common salt compound which, when dissolved in water, lowers the boiling point of the solution.
To calculate the boiling point, use the following equation: Boiling Point = K b x m, where Kb is the ebullioscopic constant and m is the molality of the solution.
The ebullioscopic constant for sodium chloride is 0.51 K kg mol-1 and the molality is equal to the number of moles of solute divided by the volume of the solution. Therefore, for a 1.0 liter solution, the boiling point of the solution would be 0.51 K kg mol-1 x 0.78 moles/1.0 liter = 0.398 K kg mol-1.
Learn more about boiling point: https://brainly.com/question/40140
#SPJ11
what the deffinition of structural formula?
Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.
Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.
The structural formula also shows the spatial arrangement of atoms and groups in a compound.
There are two types of structural formulas: condensed structural formulas and Lewis structures.
Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.
The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.
Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.
These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.
For similar question on structural formula.
https://brainly.com/question/26388921
#SPJ11
."Scientists believe the amygdala is responsible for emotion."
What is the best definition for responsible as it is used in the previous
quote?
A Liable to be called on to answer
B. Having the job or duty
C. Politically answerable
D. Able to answer for one's conduct and obligations
D. Able to answer for one's conduct and obligations
What is the amygdala?The amygdala is a pair of almond-shaped structures located in the brain's temporal lobes. It is part of the limbic system, which is involved in the processing of emotions and memory. The amygdala is involved in the formation of memories associated with emotional events, as well as the reaction to those memories.
The amygdala also plays a role in the regulation of the body's fight-or-flight response, which is the autonomic nervous system's response to danger or perceived danger. It is thought to be involved in the formation of fears and phobias, as well as the development of aggressive behaviors. In addition, the amygdala is believed to be involved in the processing of social cues, such as facial expressions and body language.
Learn more about the amygdala here:
https://brainly.com/question/24171355
#SPJ1
The molecules of a substance diffuse through a medium. The diffusion is one-dimensional. After a time to the molecules have diffused a distance Ro. What distance will the molecules have diffused after a time of 3'To? a. 2.45*Ro b. 3.00*Ro c. 4.24.Ro d. 1.73*Ro e. 9,00*Ro
The distance molecules diffuse in a medium is an example of diffusion after a tie of 3'To is 1.73 × Ro. Thus, the correct option is D.
What is diffusion?Diffusion is a physical process that occurs when molecules in a substance move from a region of high concentration to a region of lower concentration until a uniform concentration is obtained. The molecules continue to move even after the concentration is uniform, but at a slower rate.
One-dimensional diffusion is a special case of diffusion that occurs in a straight line, with no other directions being affected. It only occurs in one direction, resulting in a change in concentration. For instance, diffusion across a flat surface. Formula to calculate distance traveled in time T using one-dimensional diffusion is:
Ro² = 2D × T
where, Ro is the distance traveled by the molecules in time T, and D is the diffusion coefficient of the substance in the medium.
The distance that the molecules will have diffused in a time of 3'To will be: Ro×√3. Using the formula of one-dimensional diffusion and solving for the distance Ro, we have:
Ro² = 2D × To
Solving for Ro, we get: Ro = √2D × To
After a time of 3'To, the molecules would have traveled a distance of Ro × √3.
Therefore, the correct option is D.
Learn more about Diffusion here:
https://brainly.com/question/14852229
#SPJ11
What element from space is pulled by gravity and turn into a protostar?
Elements from space that are pulled by gravity and turn into a protostar are mostly made up of hydrogen.
Hydrogen is the most abundant element in the universe and is present in large quantities in space. When gravity pulls together a large amount of hydrogen gas and dust, it can create a protostar. As the hydrogen particles come together, they begin to heat up due to the increased pressure and eventually, the temperature and pressure become so great that nuclear fusion can occur, creating a fully-fledged star. Therefore, the process of star formation is primarily driven by the gravitational attraction between hydrogen atoms. Other elements such as helium, carbon, and oxygen may also be present in space, but their role in star formation is typically secondary.
To know more about hydrogen click here:
brainly.com/question/31018544
#SPJ4
In an open manometer with an atmospheric pressure of 104 kPa, the mercury level in the arm connected to the gas is 150 mm Hg lower than in the arm connected to the atmosphere. What is the pressure of the gas sample?
Suppose the molar solubility of Ag2CrO4 in water is x M, while its molar solubility in a 0.005 M solution of Na2CrO4 is y M. Which of the following is correct?A) It can't be determined.B) x < yC) x > yD) x = y
When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.
The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.
Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.
Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.
As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.
Learn more about molar solubility here:
brainly.com/question/28170449
#SPJ11
salts are composed of both cations and anions, both of which can potentially affect ph. which of the following salts would you test if you wanted to observe how just anions affect ph? group of answer choices nach3coo cacl2 nahco3 tris-hcl na2co3 nh4cl
The salt which you would test if you wanted to observe how just anions affect pH is Na2CO3.
What is salt? Salts are inorganic compounds made up of a cation and an anion. Salts are formed by the neutralization of an acid with a base, for example, hydrochloric acid and sodium hydroxide form table salt: NaCl. The cation is typically a metal or a positively charged organic compound, whereas the anion is generally a non-metal or a negatively charged organic compound. The salt's properties are a function of the cation and anion and are hence unique.
Salt's effect on pH: Salts are made up of cations and anions, both of which can have an impact on pH. Cations and anions can both have an impact on the pH of the solution, but they can do it in different ways. The pH of a solution can be affected by the anion of the salt since it can act as a base or an acid. The pH of a solution can be affected by the cation of the salt since it can act as an acid or a base. For instance, if we dissolve copper sulfate in water, the pH of the solution will be acidic since the sulfate ion will be hydrolyzed to create sulfuric acid, H2SO4.
However, if we dissolve sodium carbonate in water, the pH of the solution will be basic because the carbonate ion acts as a base, picking up H+ ions from water molecules to generate HCO3- ions. Hence, Na2CO3 is the salt which you would test if you wanted to observe how just anions affect pH.
To learn more about "cations and anions", visit: https://brainly.com/question/28971609
#SPJ11
Read through each scenario. Under the scenario, write which lab safety rule is being broken.
Explanation:
1. Carlos is using unknown chemicals, which is breaking the rules that state: "Treat every chemical hazardous" and "No chemical should be taken without proper authorisation".
2. Jane doesn't know where the eye-wash station is, so she is breaking Rule #1: "Know locations of laboratory safety showers, eyewash stations, and fire extinguishers. The safety equipment may be located in the hallway near the laboratory entrance."
3. Harry has broken the rule that says that "No horseplay will be tolerated." He has turned on the hot plate without instruction.
4. Brent is eating in class. Eating in laboratories where hazardous materials are present is prohibited, yet he still eats a bagel. He is at risk of food poisoning.
5. Sniffing or tasting chemicals can be dangerous or even deadly as the vapours or fumes can contain traces of unknown toxins.
6. She should be more careful, and according to lab safety rules, she should put her bag in the designated areas and work independently unless she is told by her instructor to do otherwise.
7. Rachel should dress for the lab. If she doesn't and her clothes react badly to the chemicals, it would pose serious health problems.
8. I don't know about this question.
9. Water can act as a reactant, so the chemical in the sink may damage the lab or outside pipes if corrosive. Experiments should be left in the lab unless told to do otherwise by the instructor.
10. Clean up at the end of lab. In this situation, Diana and Mike didn't clean up thoroughly, which can damage their bench top.
11. Jake is performing experiments without permission. He may become a threat to himself if his body gets contaminated.
12. The experiments wouldn't be conducted correctly, which may contaminate the students around them or damage the lab. Heather and Jennifer might pose a threat to the lab.
13. Again, tasting or smelling lab materials are strictly prohibited. Rebecca may harm her digestive system if she tries an unknown salt.
14. Unwanted reactions may occur, and the result might be acidic, corrosive, contaminate the surrounding area or discolour some places.
15. Because if we do not follow procedures and rule, we may damage some tools or fellow students.
A solution contains a total concentration of molecules [A]tot of 5.345 x 10-5 mol/l and a total concentration of molecules [B]tot of 1.245 x 10-4 mol/l. The dissociation constant for the complex AB is 2.208 x 10-6 mol/l. Part A - Concentration of AB in equilibrium Determine the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the solution.
The equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B is 0.003026 mol/l.
Why equilibrium concentration is 0.003026 mol/l.?
The equilibrium concentration of the heterodimeric complex AB formed by the molecules A and B in the given solution can be determined using the dissociation constant for the complex AB and the total concentrations of molecules A and B provided in the problem statement.
The dissociation constant for the complex AB is given by Kd = [A][B]/[AB]
where [A] and [B] are the concentrations of the individual molecules A and B and [AB] is the concentration of the complex AB at equilibrium.
Rearranging this equation gives [AB] = [A][B]/Kd.
Substituting the given values of [A], [B], and Kd in the above equation,
we get: [AB] = (5.345 x 10⁻⁵mol/l) x (1.245 x 10⁻⁴mol/l)/(2.208 x 10⁻⁶mol/l)
[AB] = 0.003026 mol/l
Therefore, the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the given solution is 0.003026 mol/l.
Learn more about equilibrium concentration
brainly.com/question/13043707
#SPJ11
Select all of the following molecules that contain stereocenters.-alkene with H wedges and CH3 dash-both 1,2-dimethylcyclohexane-cyclohexane with wedge-dash methyl
The stereocenter-containing molecule is:
1,2-dimethylcyclohexane (both carbons at position 1 and 2 are stereocenters as they have four distinct substituents connected to them)
(both carbons at position 1 and 2 are stereocenters as they have four different substituents attached to them)
Stereocenters are absent from the other compounds that were listed. Because the double bond does not include any substituents that are distinct from one another, the alkene with H wedges and the CH3 dash does not have stereocenters. As all of the carbons in cyclohexane are symmetric and do not have four separate substituents connected to them, the cyclohexane with wedge-dash methyl likewise lacks stereocenters., the only molecule in the list that contains stereocenters is 1,2-dimethylcyclohexane.
learn more about stereocenter-containing here:
https://brainly.com/question/23096013
#SPJ4
How many moles of carbon monoxide would be needed to react with 100 g Fe₂O3?
Explanation:
Amount = Reacting mass ÷ Molecular MassReacting mass = 100gMolecular Mass = (55.845×2) + ( 16 ×3) = 111.69 + 48 = 159.69 g/ mol.: Amount= 100÷ 159.69 = 0.63moles.: 0.63 moles of carbon monoxide would be needed to react with 100g of Fe2O3
how would the value of the atomic mass of the metal calculated be affected if the hot metal sample cooled off before it was transferred to the water in the calorimeter? would it be too high or too low?
The value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
How is atomic mass calculated?The atomic mass of an element is defined as the mass of an atom of an element in atomic mass units (amu). One atomic mass unit is defined as 1/12th of the mass of an atom of carbon-12.
The atomic mass of an element can be calculated using the following formula:
Atomic mass = (mass of isotope 1 × % abundance of isotope 1) + (mass of isotope 2 × % abundance of isotope 2) + (mass of isotope 3 × % abundance of isotope 3) + ...
If the hot metal sample cooled off before it was transferred to the water in the calorimeter, the temperature of the sample would have decreased. The decrease in temperature would result in a decrease in the thermal energy of the sample. Consequently, the amount of heat absorbed by the water in the calorimeter would decrease, leading to a lower value of the heat capacity of the metal.
Since the heat capacity is directly proportional to the mass of the sample, a lower value of the heat capacity would lead to a higher value of the atomic mass of the metal calculated. Therefore, the value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
Learn more about atomic mass here: https://brainly.com/question/3187640.
#SPJ11
The model for the atom that was understood when Bohr made his contributions was called the:
Select the correct answer below:
planetary model
plum pudding model
solid sphere model
quantum model
The model for the atom that was understood when Bohr made his contributions were called the option (A) Planetary Model.
What is the Bohr's Model?Bohr's model, also known as the Planetary model, is a basic model of the atom that explains the atomic structure. The atomic nucleus is in the center of the atom, with electrons moving in circular orbits about it at different energy levels.
The model is called the planetary model because it resembles the planets in the solar system revolving around the sun. The electrons are arranged in concentric circles around the nucleus, with each circle corresponding to a specific energy level.
In summary, when Bohr made his contributions, the model for the atom that was understood was called the Planetary Model.
To know more about the planetary model:
https://brainly.com/question/30790603
#SPJ11
