Answer:
0.1 mm
Explanation:
Given data : A stack of paper contains 500 sheets of paper.
The stack has dimensions of 0.297 m x 21.0 cm x
50.0 mm.
To Find : What is the thickness of one sheet of paper
So,
1 m = 1000 mm
1 m = 100 cm
1 cm = 10 mm
The stack has dimensions of 0.297 m x 21.0 cm x 50.0 mm.
0.297 m = 297 mm
21 cm = 210 m
297 mm * 210 mm are paper length width
Hence 50 mm is thickness of 500 sheets
- thickness of one sheet of paper = 50/500 = 1/10 mm
= 0.1 mm
Hope It Helps :)
The thickness of one sheet of paper would be 62.37 ×10⁻⁶ meters.
The volume of the stack of paper in cm³ would be 0.031185 mm³.
What is multiplication?Finding the product of two or more numbers in mathematics is done by multiplying the numbers. It is one of the fundamental operations in mathematics that we perform on a daily basis.
As given in the problem a stack of paper contains 500 sheets of paper. The stack has dimensions of 0.297 m x 21.0 cm x 50.0 mm.
The volume of the stack = 0.297 m x 21.0 cm x 50.0 mm
= 0.000297 mm×2.1 mm x 50.0 mm
the thickness of one sheet of paper = 0.000297 mm×2.1 mm x 50.0/500mm
=62.37 ×10⁻⁶ meters
The volume of the stack of paper = 31.185 cm³
To learn more about multiplication here, refer to the link;
https://brainly.com/question/10520264
#SPJ2
Any two importance of measurement
Answer:
to sell and to buy
Explanation:
measurement is a comparison between unknown quantity with a known quantity
what’s the correct answer
According to 1st equation of motion :
[tex]\boxed{ \boxed{v = u + at}}[/tex]
where,
v = final velocityu = initial velocity a = acceleration t = timelet's solve for t
[tex] \hookrightarrow \: 17.63 = 0 + 2.13t[/tex]
[tex] \hookrightarrow \: t = \dfrac{17.63}{2.13} [/tex]
[tex] \hookrightarrow \: t = 8.276 \approx 8.28\: \: sec[/tex]
What is the displacement of a car traveling 14 km North on I985 then 20 km South on I985?
Displacement = (14-20) Km = -6 Km
The displacement of a car is -6 Km South
Object X is attracted to object Y. If object Y is negatively charged, what can you say about object X? (a) It is positively charged (b) It is negatively charged (c) It is electrically neutral (d) Object X may be positively charged, but it is possible it is also electrically neutral with an induced charge separation
Answer:
a) Object X is positively charged
Explanation:
Unlike charges attract each other
Like charges repel each other
The object X will be positively charged through charging by conduction.
The given parameters:
Object Y = positively chargeA charge can be produced by conduction. This method of charge generation involves charging a neutral body by placing it in contact charged body.
When object X is placed in contact with object Y, which is negatively charged, the negative charges of object Y repels negative charges of object X. This leaves object X with excess protons, thereby becoming positively charged.
Thus, the object X will be positively charged through charging by conduction.
Learn more about charging by conduction here: https://brainly.com/question/8418256
Bella makes the 2.5m distance to her food bowl in 9.1 seconds. What is her average velocity?
Average Velocity=Total Distance/Total Time
[tex]\\ \sf\longmapsto \dfrac{2.5}{9.1}[/tex]
[tex]\\ \sf\longmapsto 0.3m/s[/tex]
You are taking a turn at 30.0 m/s on a ramp of radius 25.0 m. What is your acceleration?
Acceleration = v^2 / r
Acceleration = 30^2/25
Acceleration = 900/25
Acceleration = 36 m/s^2
Determining a formula for the change in surface area of a uniform solid sphere of radius r if it's Coefficient of linear expansion is a (assumed constants )and its temperature is changed by DT
Answer:
Explanation:
Area A = 4 pi R^2
lnA = ln(4 pi) + 2 ln R
dA/A = 2 dR/R = 2*(alpha)*dT
delta A = 2A*alpha*(delta T)
OR
A at T + deltaT
delta A = 4 pi (R + deltaR)^2 - A
= 4 pi R(1 + alpha*deltaT)^2 -A
= 4 pi R^2 *[1 + 2*alpha*deltaT +
(alpha*deltaT)^2] - A
= 2*A*alpha*deltaT + A*(alpha*deltaT)^2
(Ignore the second term in deltaT^2)
If you are given force and time, you can determine power if you can know
(a) watts
(b) energy
(c) distance
Answer:
joules/energy.
Explanation:
power is defined as the rate of work. Hence power=work/time, then you obtain Watts.
Work is the product of force and displacement.
A train accelerates from rest and covers a distance of 600m in 20s. What is the train's speed at the end of 20s? What is the final velocity of the train after 20s?
Answer:
v = 60 m/s
final velocity after 20 seconds depends on how long it continues to accelerate after 20 seconds. Also we do not know the direction to complete the velocity requirements of a scalar value and direction component.
Explanation:
If we assume that the acceleration is constant
d = ½at² = ½(Δv/t)t² = ½Δvt = ½(v - 0)t = ½vt
v = 2d/t
v = 2(600)/20 = 60m/s
explain 3points to be taken into consideration while measuring the length of a body
Answer:
Y T and v
Explanation:
A vehicle starts from rest and travels 50 m in 5 s. What is its acceleration?
What is the kinetic energy of a 0.5 kg soccer ball that is traveling at a
velocity of 3 m/s?
What’s the answer
Answer:
kinetic energy = 1/2mv²
k.E =1/2 X 0.5 X 3²
k.e = 9/4
K.E = 2.25j
Convert 4 centimeters to meters using dimensional analysis and scientific notation. Please go step by step as I am having difficulty with this subject.
Question:-
Convert 4cm to m
Solution:-
Lets do
First note down the below formula
[tex]\boxed{\sf 1m=10^{2}cm}[/tex]
Then
[tex]\boxed{\sf 1cm=10^{-2}cm}[/tex]
Now we are given 4cm
So convert
[tex]\\ \sf\longmapsto 4\times 10^{-2}m[/tex]
If we simplify to decimal
[tex]\\ \sf\longmapsto 4cm=0.04m[/tex]
Hence done .
A man walks his dog on a very straight path in a park. He can walk back and forth as slow or fast as he wants to, but he has to stay on the path. Which of the following statements is correct for an arbitrary time interval?
a. His average speed can be greater than the magnitude of his average velocity.
b. His average speed can be less than the magnitude of his average velocity.
c. Since he is walking along a straight path, his average acceleration must be zero.
d. His average velocity must be zero.
Answer:
a. His average speed can be greater than the magnitude of his average velocity.
Explanation:
As speed is distance traveled over time traveled, this is always greater than zero if he has moved at all.
velocity is displacement over time traveled. As the man is allowed to return to the point of origin, his velocity at some point might be zero while his speed is positive.
what is an adam and a moreculw and a half note ???
what is kinematics ???
what is it concerned with ??
Kinematics deals with the motion and time
It is concerned with motion
[tex] \huge \boxed{\mathfrak{Question} \downarrow}[/tex]
What's kinematics? What is it concerned with?[tex] \huge \boxed{\mathfrak{Answer} \downarrow}[/tex]
Kinematics is a branch of mechanical physics that deals with motion. It includes all types of motion & all ways of showing motion (like, through graphs, moving objects & so on). In short kinematics is the => geometry of motion.2. Determine the units of the quantity described by each of the following
combinations of units:
a. kg (m/s) (1/s)
b. (kg/s) (m/s)
c. (kg/s) (m/s)
d. (kg/s) (m/s)
We have that the unit of the quantities are described
a.kg (m/s) (1/s)=Newton
b. (kg/s) (m/s^2)=Newton
c. (kg/s) (m/s)^2=Newton
d. (kg/s) (m/s)=Newton
From the question we are give the units
a.kg (m/s) (1/s)
b. (kg/s) (m/s^2)
c. (kg/s) (m/s)^2
d. (kg/s) (m/s)
a)
Generally
kg (m/s) (1/s) is Represented as Newton
Where Newton is the unit Force and Weight
b)
Generally
(kg/s) (m/s) is the unit representation of Newton
Therefore
Newton
c)
kg/s) (m/s) is the unit representation of Newton
Therefore
Newton
d)
Generally
(kg/s) (m/s) is the unit representation of Newton
Therefore
Newton
For more information on this visit
brainly.com/question/11800127
A wheel of mass 4kg is pulled up a plane inclined at 30° to the horizontal by a force of 45N applied to the axle and parallel to the plane. If the wheel has a radius of 0.5m and the moment of inertia 0.5kgm?, calculate the translational velocity acquired after travelling 12m up the plane, assuming the wheel is initially at rest (6 marks)
Answer:
v = 10 m/s
Explanation:
Let's assume the wheel does not slip as it accelerates.
Energy theory is more straightforward than kinematics in my opinion.
Work done on the wheel
W = Fd = 45(12) = 540 J
Some is converted to potential energy
PE = mgh = 4(9.8)12sin30 = 235.2 J
As there is no friction mentioned, the remainder is kinetic energy
KE = 540 - 235.2 = 304.8 J
KE = ½mv² + ½Iω²
ω = v/R
KE = ½mv² + ½I(v/R)² = ½(m + I/R²)v²
v = √(2KE / (m + I/R²))
v = √(2(304.8) / (4 + 0.5/0.5²)) = √101.6
v = 10.07968...
A car is accelerating at 6 m/s2. How long would it take the car to go 12 m/s faster?
Answer:
2 seconds
Explanation:
Each second, it increases its speed by 6 m/s, so it will take 2 seconds for the speed to increase by 12 m/s.
hằng số phổ biến chất khí
Answer:
please in english......................................
Explanation:
why do we observe winds blowing towards the equator
Answer:
The cooler air from region of up to 30degree latitude belt on both sides of the equator ,rushes toward the equator ,to take the place of warm rising air. This makes the wind to blow from north and south direction toward equators
Which of the following can be excluded when evaluating the reliability of a source? (1 point)
O accuracy of data
O timeliness of information
O purpose of the author
O length of content
D. Length of content.
Reliable sources need to be accurate, they need to make sense at the time they were created and the author needs to not be biased with their writing. It does not matter how long the content is as long as it is reliable.
A mountain climber at the peak ha ___________ energy.
A.gravitational potential
B. Elastic potential
C.Kinetic
The microwave portion of the spectrum has wavelengths ranging from 1 mm to 1 m. Find the corresponding frequencies. g
Answer:
f = c / y where y is the wavelength
f1 = 3 *10E8 m/s / .001 m = 3 * 10E11 / s
f2 = 3 * 10E8 m/s / 1 m = 3 * 10E8 / s
In order to have a good hypothesis, which of the following are needed:
Answer:
There must be a possibility to prove that the hypothesis is true. There must be a possibility to prove that the hypothesis is false. The results of the hypothesis must be reproducible.
Explanation:
Make sure your hypothesis is "testable." To prove or disprove your hypothesis, you need to be able to do an experiment and take measurements or make observations to see how two things (your variables) are related. You should also be able to repeat your experiment over and over again, if necessary
.
BONUS: Usain Bolt speeds up from 0 m/s to 22 m/s in
55 seconds. What is his acceleration in meters per
minute (Round answer to nearest whole number)?
Answer:
0.4 meters per second I believe
find the final velocity of the initial velocity of 8m/s with an acceleration of 7 m/s2 over 3 second interval
Please find attached photograph for your answer. Hope it helps! Please do comment.
distinguish between basic and derived units
Answer:
Base units are defined units based on specific objects or events in the physical world. Derived units are defined by combining base units.
Base units are defined by a particular process of measuring a base quantity whereas derived units are defined as algebraic combinations of base units. For example, length is a base quantity in both SI and the English system, but the meter is a base unit in the SI system only.
What is difference between simple microscope and compound microscope
Answer:
simple microscope - a codenser lens is not required I simple microscopes .
compound microscope- the condenser lens is embedded in compound microscopes for adjusting the intensity of the light to magnify the object.
Explanation:
hope this helps you
mrk me brainiliest
What phase of matter has the highest energy?
Answer:
plasma is the state with the highest energy level.
