Answer:
I think the answer is C
Explanation:
Its heavy but not too heavy
75 points!
In a particular chemical reaction, the energy of the reactants is 30 kJ and the energy of the products is 5 kJ. The maximum energy of the system is 40 kJ.
A. Sketch a potential energy diagram for this reaction. Make sure to label the energy of the reactants, the energy of the products, the activation energy, and the enthalpy change for the reaction.
B. What is the activation energy for this reaction?
C. What is the enthalpy change for this reaction?
D. Is this reaction endothermic or exothermic? Explain your answer in two ways: first, using the energy values, and second, by referring to the shape of the graph.
Answer:
The activation energy of a chemical reaction is the energy require to form the activated complex and the activated complex then converted to product. The activation energy is always positive for both endothermic and exothermic reactions.
Explanation:
pls if im worng add a star pls
Two chickens are bred and produce the following numbers of offspring. What are the most likely appearances of the parents?
Table of offspring
A. Both parents have red/white feathers.
B. Both parents have white feathers.
C. One parent has white feathers, and one parent has red/white feathers.
D. One parent has white feathers, and one parent has red feathers.
Answer:
Well, Your best answer will be is C. One parent has white feathers, and one parent has red/white feathers.
GOOD LUCK!~
[tex]^{By[/tex][tex]^{Itsbrazts[/tex]
Answer:
c
Explanation:
Which is NOT a subjective feeling experience? A) Happy B) Sore C) Angry D) Sad
Answer:
b sore
Explanation:
because it's a physical feeling I think
Please help! I will give Brainliest! The image shows a cross section of a landscape and a well.
1: Land surface. 2: Unsaturated zone. 3: Groundwater. 4: Saturated zone.
Please Hurry timed test! Which of the layers shown is an aquifer?
1
2
3
4
Answer:
3!
Explanation:
have a nice day
Which of the following gives the best description of the motion of electrons in a conductor?
A.
The electrons in conductors usually move in straight lines.
B.
The electrons in conductors are able to move about freely.
C.
The electrons in insulators are unable to move about freely.
D.
The electrons in conductors usually move in regular patterns.
Answer:
The correct answer is B. The electrons in conductors are able to move about freely.
Explanation:
The conductive materials are those that have an atomic structure that favors that the electrical charges can be easily moved inside. That is, a conductive material is one that allows the transport of electric charge, presenting little resistance to the movement of electric charge or electrons when an electric field is applied.
The arrangement and freedom of movement of the electrons along the atomic structure is what favors the circulation of electricity through the conductor.
So, the correct answer is B. The electrons in conductors are able to move about freely.
Determine What is the efficiency of a machine whose work output is 4 joules, and whose work input is 10 joules?
Answer:
The efficiency of the machine is 40 %.
Explanation:
We have,
Output work by the machine is 4 joules and the input work is 10 joules.
It is required to find the efficiency of a machine. The efficiency of a machine is given by the ratio of output work to the input work. It is given as :
[tex]\eta=\dfrac{4}{10}\times 100\\\\\eta=40\%[/tex]
So, the efficiency of the machine is 40 %.
does space have plenty of oxygen
Answer:
I don't think so because we can't breathe in space
Explanation:
Answer:
No
Explanation:
There is no oxygen in space, so astronauts must bring tanks of oxygen
Which term is defined as the force applied to the object divided by the mass of the object?
speed
velocity
mass
acceleration
Answer:
acceleration
Explanation:
From the question: "FORCE... divided by the MASS..." is translated to a math equation as "F / m", where "F" is the force and "m" is the mass.
Now, the second Newton's law says "F = m . a ", where a is acceleration.
If you move m to the left side, clearly you have "F / m", and "a" is alone to the right. Math equation:
a = F / m
acceleration = force / mass
Which triangle side lengths form a right triangle? Choose all that apply.
A. 5,6,7
B. 6,8,14
C. 8,15,17
D. 10,12,15
E. 15,20,25
F. 16,18,20
Convection currents not only in the Earth's core but in what?
A. Only liquids
B. When a dense substance is warmer than a less dense substance
C. In both liquids and gases
D. Weakly in solids
Answer:
B. When a dense substance is warmer than a less dense substance
Explanation:
What is the net force acting on a .15 kg hockey puck accelerating at a rate of 12 m/s2
Answer:
The net force is 1.8N
Explanation:
Given that the formula for force is Force = mass×acceleration. So you have to substitute the values into the formula :
[tex]force = mass \times acceleration[/tex]
Let mass = 0.15kg,
Let acceleration = 12m/s²,
[tex]force = 0.15 \times 12[/tex]
[tex]force = 1.8[/tex]
Answer:
1.8 Newtons
Explanation:
We want to figure out the net force acting on a 0.15 kg hockey puck that has an acceleration of 12 m/s². To solve this, we must apply Newton's Second Law of Motion which is denoted by the formula: f = ma.
Here, f is the force, m is the mass, and a is the acceleration. Plug our given values in to find f:
f = ma
f = (0.15 kg) * (12 m/s²) = 1.8 Newtons
Thus, the answer is 1.8 N.
~ an aesthetics lover
This graph provides data on the amount of water needed to grow four different crops, each used to produce ethanol, a fuel. For each crop, the data shows how many liters of water are needed to produce one liter of ethanol fuel. Which of the following would require using the most water? *
Producing 100 L of ethanol from sugar cane
Producing 200 L of ethanol from sugar beet
Producing 300 L of ethanol from potatoes
Producing 400 L of ethanol from corn
Answer:
Producing 300 L of ethanol from potatoes
Explanation:
From the diagram, one liter of ethanol production from sugar cane requires 2000 liters of water. Hence, in order to produce 100 L of ethanol from sugar cane, 2000 x 100 = 200,000 L of water.
1000 liters of water is needed to produce 1 liter of ethanol from sugar beet. Hence, 200 x 1000 = 200,000 L of water will be needed to produce 200 liters of ethanol.
1000 liters of water is also required to produce 1 liter of ethanol from potatoes, hence, 300 x 1000 = 300,000 L of water would be required to produce 300 L of ethanol from the same material
About 500 liters of water is required to produce 1 liter of ethanol from corn, hence, 400 x 500 = 200,000 L of water would be needed to produce 400 L of ethanol from corn.
In conclusion, producing 300 L of ethanol from potatoes would require using the most water among all the options.
David drinks a glass of water in his kitchen. The water is at room temperature, and David
decides to make it colder by adding ice. Which of the following describes why the ice cubes
will melt?
A. Liquid water is reacting with solid water to absorb energy.
B. Water is evaporating from the surface of the water.
C. Slow-moving molecules move out of the ice.
D. Heat from the water moves into the ice.
Answer:
I think it's C
Explanation:
The pressure of water at the bottom of a well is _________ than at the surface of the pond.
Answer:
Greater
Explanation:
When you go deeper in water, the presure increases, the deeper you go, so it would be greater in a well then the surfce of a pond. Hope this helps!
A uniform electric field contains a number of particles. All are experiencing forces in the same direction as the electric field. What can be concluded from this?
All the particles have negative charges.
All the particles have positive charges.
All the particles are charged, but they may be positive or negative.
All the particles must be uncharged.
Answer: D
All the particles must be uncharged
Explanation:
If all the particles are positively charged, then there will be force of repulsion between them which will give different directions away from each other. The same is applicable if they are all negatively charged.
If the particles are positively and negatively charged, their will be force of attraction between them which will give different directions towards each other.
For all to be experiencing forces in the same direction, We can conclude that
All the particles must be uncharged.
Answer:
This picture represents the electric field diagram between two particles with static charges.
Do the two particles have the same charge?
✔ no
If the particles are free to move, what affect will the two particles have on each other?
✔ They will attract each other.
If a third particle was added to this field with a positive charge, what would it be attracted to?
✔ B
If an uncharged particle was placed between A and B, which way would it move?
✔ neither direction
Explanation:
For each of the following solutions, name the solvent and the solute
Saltater
Seltzer water
Lemonade made from powdered drink mix
Answer:
Explanation:
The solvent in all the given solutions is water. The solute in the salt water is salt and the solute in the seltzer water or carbonated water is carbon dioxide. The solute in lemonade is lemon pulp juice.
What is a solution?A solution is the combination of a solute and a solvent. The solute can be of completely soluble , partially soluble or insoluble in the solvent. The completely dissolving solute forms a homogeneous solution.
A partially soluble or insoluble solution solutes form heterogeneous solutions. The solubility depends on the bond type, mass, pressure, temperature etc.
The solution salt water is formed by dissolving salt in the solvent, water. Similarly, the seltzer water or carbonated water is formed by carbon dioxide dissolved in water solvent.The solute in lemonade is lemon juice and solvent is water.
To find more on solutions, refer here:
https://brainly.com/question/1616939
#SPJ2
How much current must be applied across a 60 Ω light bulb filament in order for it to consume 55 W of power? Unserious answers will be deleted, and reported. (Please show some work)
Answer: current I = 0.96 Ampere
Explanation:
Given that the
Resistance R = 60 Ω
Power = 55 W
Power is the product of current and voltage. That is
P = IV ...... (1)
But voltage V = IR. From ohms law.
Substitutes V in equation (1) power is now
P = I^2R
Substitute the above parameters into the formula to get current I
55 = 60 × I^2
Make I^2 the subject of formula
I^2 = 55/60
I^2 = 0.92
I = sqr(0.92)
I = 0.957 A
Therefore, 0.96 A current must be applied.
An airplane moves in straight level flight at constant velocity. What is the
net force acting on it if the mass of the plane is 1000 kg and the frictional
drag of the air is 1800 N? *
Answer:
Net force = 0
Explanation:
We have, an airplane moves in straight level flight at constant velocity.
Mass of the plane is 1000 kg
The frictional force acting of the air is 1800 N.
It is required to find the net force acting on it. We know that net force is given by the product of mass and acceleration. But here the airplane moves with constant speed, it means its acceleration is equal to 0 such that net force is equal to 0.
Work is the product of force and an object's
A. time
B. momentum
C. displacement
D. space
Answer:
C. displacement
Explanation:
Work is the product of force and an object's displacement. The correct answer is displacement and the correct option is option (C).
The result of a force and an object's displacement is called work. Work (W) is represented mathematically by the equation:
W = F × d
In the International System of Units (SI), the unit of work is the joule (J). When a force is applied to an object and it moves over a predetermined distance in the force's direction, work has been done.
No work is done if the item stays still or if the force and displacement are parallel to one another.
Therefore, Work is the product of force and an object's displacement and the correct option is option (C).
To know more about the work done:
https://brainly.com/question/32263955
#SPJ6
Signals that are broken up into binary code are characterized as
Well I have 2 examples.
AM/FM radio is a perfect type of technology.
A smart phone is also a great presentation of technology.
Answer:Continuous signals
Can someone please help me with this?
Answer:
the answer is A.
Answer:
The Answer Is B.
It's Hard To Explain You Just Have To Trust Me
Explanation:
If It's Correct (Which i am certain that it is) can you plz award me with Brainliest
Which of the following provides the best summary of the process of natural
selection?
A. Population sizes increase with every generation.
B. Individuals pass on their best traits to their offspring.
C. Mutations help an individual survive and reproduce.
D. Well-adapted individuals survive and reproduce.
Answer:
B. Individuals pass on their best traits to their offspring.
Explanation:
because genes are always passed from parents to offspring.
The best summary of the process of natural selection is Individuals pass on their best traits to their offspring. Hence, the correct option is B.
What is the theory of Natural selection?The theory of natural selection gives the mechanism of evolution. It defines the method of different survival and reproduction of individuals due to differences in phenotype.
The theory of natural selection was proposed by Charles Darwin as a way of adaptation and speciation. The variations occur in organisms by random mutations occurring in the genome of individual organisms and this change in mutations may inherit in offspring.
Organisms that are more adapted to the environment are more likely to survive and pass on the genes to future generations. This process cause changes to the generations and diverged over time.
The organisms produce more offspring that are able to survive in the environment. The four factors of natural selection are Variations, Inheritance, Selection, and time.
Thus, the best summary of the process of natural selection is individuals pass on their best traits to their offspring. Hence, the ideal solution is option B.
To learn more about the Theory of natural selection:
https://brainly.com/question/912187
#SPJ7
a force of 20 N acted on a ball thereby imparting an impulse of 70 Ns to the ball. For how long did the force act on the ball?
Answer:3.5 seconds
Explanation:
An ohmmeter is a common device for measuring resistance. Using an ohmmeter, you find that a certain material has a very high resistance. This material is most likely what?
conductor
insulator
semiconductor
superconductor
Answer:
An insulator
Explanation:
Insulators have a very high resistance because the electrons of the insulator are bounded strongly with the nucleus. Hence it requires more voltage to move an electron from the valence band to the conduction band.
What are the two ways to create plasma?
Answer:
Plasma can be artificially generated by heating a neutral gas or subjecting it to a strong electromagnetic field to the point where an ionized gaseous substance becomes increasingly electrically conductive.
Answer:
By heating a natural gas
Explanation:
which of the following describes glass?
A. a material that has a low resistance and allows charges to move freely
B. a material that has a high resistance and prevents charges from moving freely
C. a material that has a low resistance and prevents charges from moving freely
D. a material that has a high resistance and allows charges to move freely
Answer:
C
Explanation:
Glass doesn't move freely until it is too hot and melts.
Identify the magnetic north pole of Earth’s magnet?
Answer:
using magnets
Explanation:
If we hang a magnet with a rope to an object the north pole of the magnet will point to the Earth's north pole
A loop with a break in it that prevents current from flowing is called a(n)_______
circuit.
Answer:
an open circuit
Explanation:
The functional unit of the kidney is the ________?
Answer:
nephron
Explanation:
I can't really explain this one.
Answer:
nephron
Explanation:
thats what it is
21. An electric lamp is marked 2 points
240V, 60W. What is its
resistance (?) when it is
operated at the correct
voltage?
O A. 1/960
O B. 1/4
O 0.4
O D. 960
Answer:
The resistance of the lamp is 960 ohms.
Explanation:
We have,
Voltage of electric lamp is 240 V and power is 60 W.
It is required to find the resistance of the lamp.
The power of an electrical device is given by :
[tex]P=\dfrac{V^2}{R}[/tex]
R is resistance
[tex]R=\dfrac{V^2}{P}\\\\R=\dfrac{(240)^2}{60}\\\\R=960\ \Omega[/tex]
So, the resistance of the lamp is 960 ohms.
