a student standing between two walls shouts once.he hears the first echo after 3 seconds and the next after 5 seconds. calculate the distance between the walls.​

Answer:

The SI unit of power is watt

Answer:

C. A force must be acting on the object.

Explanation:

This is due to the action of its momentum direction.

[tex].[/tex]

Answer: Wavelength can be defined as the distance between two successive crests or troughs of a wave. It is measured in the direction of the wave.

Explanation:

Wavelength refers to the length or distance between two identical points of neighboring cycles of a wave signal traveling in space or in any physical medium. ... The wavelength of a signal is inversely proportional to its frequency, that is, the higher the frequency, the shorter the wavelength.

Answer:

Explanation:

That is an amazing fact.

The minus sign is what you have to pay attention to. The earth has a mass of 100 times that of Saturn. As someone on here once noted, Saturn has such a low density that it would float in water.

The answer is D

Polarized sunglasses creates filter of vertical openings for light. The light rays will reach the eyes of human vertically only.

The sun rays will not reach human eye directly which will create a shield for sun light burden on human eye.

Polarized sunglasses are best used for blocking and eliminating certain wavelengths of light.

Therefore the correct answer is option C. Polarizes Sunglasses are polarized and it filter out certain wavelengths of light.

Learn more at https://brainly.com/question/24372632

Answer:

the density of the salt water is 1030 kg/m³

Explanation:

Given;

radius of the cylindrical pool, r = 2 m

depth of the pool, h = 1.3 m

specific gravity of the salt water, γ = 1.03

The atmospheric pressure, P₀ = 1.013 x 10⁵ Pa

Density of fresh water, [tex]\rho _w[/tex] = 1000 kg/m³

The density of the salt water is calculated as;

[tex]Specific \ gravity \ of \ salt\ water \ (\gamma _s_w) = \frac{density \ of \ salt \ water \ (\rho_{sw})}{density \ of \ fresh \ water \ (\rho_{w})} \\\\1.03 = \frac{\rho_{sw}}{1000 \ kg/m^3}\\\\\rho_{sw} = 1.03 \times 1000 \ kg/m^3\\\\\rho_{sw} = 1030 \ kg/m^3[/tex]

Therefore, the density of the salt water is 1030 kg/m³

Answer:

the  speed of the electron at the given position is 106.2 m/s

Explanation:

Given;

initial position of the electron, r = 9 cm = 0.09 m

final position of the electron, r₂ = 3 cm = 0.03 m

let the speed of the electron at the given position = v

The initial potential energy of the electron is calculated as;

[tex]U_i = Fr = \frac{kq^2}{r^2} \times r = \frac{kq^2}{r} \\\\U_i = \frac{(9\times 10^9)(1.602\times 10^{-19})^2}{0.09} \\\\U_i = 2.566 \times 10^{-27} \ J[/tex]

When the electron is 3 cm from the proton, the final potential energy of the electron is calculated as;

[tex]U_f = \frac{kq^2}{r_2} \\\\U_f = [\frac{(9\times 10^9)\times (1.602 \times 10^{-19})^2}{0.03} ]\\\\U_f = 7.669 \times 10^{-27} \ J \\\\\Delta U = U_f -U_i\\\\\Delta U = (7.699\times 10^{-27} \ J ) - (2.566 \times 10^{-27} \ J)\\\\\Delta U = 5.133 \times 10^{-27} \ J[/tex]

Apply the principle of conservation of energy;

ΔK.E = ΔU

[tex]K.E_f -K.E_i = \Delta U\\\\initial \ velocity \ of \ the \ electron = 0\\\\K.E_f - 0 = \Delta U\\\\K.E_f = \Delta U\\\\\frac{1}{2} mv^2 = \Delta U\\\\where;\\\\m \ is \ the \ mass \ of\ the \ electron = 9.1 1 \times 10^{-31} \ kg\\\\v^2 = \frac{ 2 \Delta U}{m} \\\\v = \sqrt{\frac{ 2 \Delta U}{m}} \\\\v = \sqrt{\frac{ 2 (5.133\times 10^{-27})}{9.11\times 10^{-31}}}\\\\v = \sqrt{11268.935} \\\\v = 106.2 \ m/s[/tex]

Therefore, the  speed of the electron at the given position is 106.2 m/s

Answer:

Volume of a metal block = 24 cm^3

Volume of a block twice as long, wide and high = 192 cm^3

Explanation:

Volume of a block is measured in l*w*h and in the first block, the sides are 3, 2 and 4 and 3*2*4 = 24

Second block, just double each of the lengths to get 6*4*8 = 192

After being released, the restoring force exerted by the spring performs

1/2 (5200 N/m) (0.090 m)² = 12.06 J

of work on the block. At the same time, the block's weight performs

- (0.260 kg) g (0.090 m) ≈ -0.229 J

of work. Then the total work done on the block is about

W ≈ 11.83 J

The block accelerates to a speed v such that, by the work-energy theorem,

W = ∆K   ==>   11.83 J = 1/2 (0.260 kg) v ²   ==>   v ≈ 9.54 m/s

Past the equilibrium point, the spring no longer exerts a force on the block, and the only force acting on it is due to its weight, hence it has a downward acceleration of magnitude g. At its highest point, the block has zero velocity, so that

0² - v ² = -2gy

where y is the maximum height. Solving for y gives

y = v ²/(2g) ≈ 4.64 m

Answer:

875 Watts

Explanation:

P = W/t = mgh/t = 700(10)/8 = 875 Watts

Answer:

The current is more in the parallel combination than in the series combination.

Explanation:

two resistances, R1 and R2 are connected to a battery of voltage V.

When they are in series,

R = R1 + R2

In series combination, the current is same in both the resistors, and it is given by Ohm's law.

V = I (R1 + R2)

[tex]I = \frac{V}{R_1 + R_2}[/tex]..... (1)

When they are connected in parallel.

the voltage is same in each resistor.

The effective resistance is R.

[tex]R = \frac{R_1R_2}{R_1 + R_2}[/tex]

So, the current is

[tex]I = \frac{V(R_1+R_2)}{R_1 R_2}[/tex]..... (2)

So, the current is more is the parallel combination.

Answer:

3.1 kg

Explanation:

Applying,

R = m(g-a)..................... Equation 1

Where R = weight of the scale when the elevator is coming down, a = acceleration of the elevator, g = acceleration due to gravith.

From the question,

Given: m = 5 kg, a = 3.8 m/s²

Constant: g = 9.8 m/s²

Substitute these values into equation 1

R = 5(9.8-3.8)

R = 5(6)

R = 30 N

Hence the spring scale is

m' = R/g

m' = 30/9.8

m' = 3.1 kg

Answer:

Here, m=9×10

−31

kg,

q=1.6×10

−19

C,v=3×10

7

ms

−1

,

b=6×10

−4

T

r=

qB

mv

=

(1.6×10

−19

)(6×10

−4

)

(9×10

−31

)×(3×10

7

)

=0.28m

v=

2πr

v

=

2πm

Bq

=

2×(22/7)×9×10

−31

(6×10

−4

)×(1.6×10

−19

)

=1.7×10

7

Hz

Ek=

2

1

mv

2

=

2

1

×(9×10

−31

)×(3×10

7

)

2

J

=40.5×10

−17

J=

1.6×10

−16

40.5×10

−17

keV

=2.53keV

Answer:

[tex]f=9.55Hz[/tex]

Explanation:

From the question we are told that:

Number of Turns [tex]N=200[/tex]

Length [tex]l=5cm to 10cm[/tex]

Voltage [tex]V=18V[/tex]

Magnetic field [tex]B=300mT[/tex]

Generally, the equation for Frequncy of an amarture is mathematically given by

[tex]f =\frac{ V}{(N B A * 2 pi )}[/tex]

[tex]f =\frac{ 18}{(200 300*10^{-3} (10*10^-2)(5*10^{-2}) * 2 *3.142 )}[/tex]

[tex]f=9.55Hz[/tex]

Answer:

It will travel 350 meters each second.

Explanation:

The unit rate, 350 m/s, tells us that the jet will travel 350 meters per every second elapsed.

Answer:

5.83 seconds

Explanation:

60 seconds in 1 minute

350 meters per second

350/60

=5.83

The masses of the gliders provided in the question differ from the masses mentioned in the "Required" section. I'll use the first masses throughout.

Momentum is conserved, so the total momentum of the system is the same before and after the collision:

m₁ v₁ + m₂ v₂ = m₁ v₁' + m₂ v₂'

==>

(0.160 kg) (0.710 m/s) + (0.296 kg) (-2.23 m/s) = (0.160 kg) v₁' + (0.296 kg) v₂'

==>

-0.546 kg•m/s ≈ (0.160 kg) v₁' + (0.296 kg) v₂'

where v₁' and v₂' are the gliders' respective final velocities. Notice that we take rightward to be positive and leftward to be negative.

Kinetic energy is also conserved, so that

1/2 m₁ v₁² + 1/2 m₂ v₂² = 1/2 m₁ (v₁' )² + 1/2 m₂ (v₂' )²

or

m₁ v₁² + m₂ v₂² = m₁ (v₁' )² + m₂ (v₂' )²

==>

(0.160 kg) (0.710 m/s)² + (0.296 kg) (-2.23 m/s)² = (0.160 kg) (v₁' )² + (0.296 kg) (v₂' )²

==>

1.55 kg•m²/s² ≈ (0.160 kg) (v₁' )² + (0.296 kg) (v₂' )²

Solve for v₁' and v₂'. Using a calculator, you would find two solutions, one of which we throw out because it corresponds exactly to the initial velocities. The desired solution is

v₁' ≈ -3.11 m/s

v₂' ≈ -0.167 m/s

and take the absolute values to get the magnitudes.

If you want to instead use the masses from the "Required" section, you would end up with

v₁' ≈ -3.18 m/s

v₂' ≈ -0.236 m/s

Answer:

1.37 mm²

Explanation:

From the image attached below:

Let's take a look at the two rays r and r' hitting the same mirror from two different positions.

Let x be the distance between these rays.

[tex]d_o =[/tex] distance between object as well as the mirror

[tex]d_{eye}[/tex] = distance between mirror as well as the eye

Thus, the formula for determining the distance between these rays can be expressed as:

[tex]x = 2d_o tan \theta[/tex]

where; the distance between the eye of the observer and the image is:

[tex]s = d_o + d_{eye}[/tex]

Then, the tangent of the angle θ is:

[tex]tan \theta = \dfrac{R}{d_o+d_{eye}}[/tex]

replacing [tex]tan \theta = \dfrac{R}{d_o+d_{eye}}[/tex] into [tex]x = 2d_o tan \theta[/tex], we have:

[tex]x = 2d_o \Big( \dfrac{R}{d_o+d_{eye}}\Big)[/tex]

[tex]x = 2(10) \Big( \dfrac{0.25}{10+28}\Big)[/tex]

[tex]x = 20\Big( \dfrac{0.25}{38}\Big) cm[/tex]

x = (0.13157 × 10) mm

x = 1.32 mm

Finally, the area A = π r²

[tex]A = \pi(\frac{x}{2})^2[/tex]

[tex]A = \pi(\frac{1.32}{2})^2[/tex]

A = 1.37 mm²

Answer:

opinion a

Explanation:

the si units of distance is metre (m)

Answer:

A

Explanation:

what do you mean about it

Solution :

We know,

Distance,

[tex]$S=ut+\frac{1}{2}at^2$[/tex]

[tex]$S=ut+0.5(a)(t)^2$[/tex]

For the first 20 ms,

[tex]$S=0+0.5(220)(0.020)^2$[/tex]

S = 0.044 m

In the remaining 30 ms, it has constant velocity.

[tex]$v=u+at$[/tex]

[tex]$v=0+(220)(0.020)[/tex]

v = 4.4 m/s

Therefore,

[tex]$S=ut+0.5(a)(t)^2$[/tex]

[tex]$S'=4.4 \times 0.030[/tex]

S' = 0.132 m

So, the required distance is = S + S'

                                              = 0.044 + 0.132

                                              = 0.176 m

Therefore, the tongue can reach = 0.176 m or 17.6 cm

Answer:

The total distance is 0.176 m.

Explanation:

For t = 0 s to t = 20 ms

initial velocity, u = 0

acceleration, a = 220 m/s^2

time, t = 20 ms

Let the final speed is v.

Use first equation of motion

v = u + at

v = 0 + 220 x 0.02 = 4.4 m/s

Let the distance is s.

Use second equation of motion

[tex]s = u t + 0.5 at^2\\\\s = 0 + 0.5 \times 220 \times 0.02\times 0.02\\\\s = 0.044 m[/tex]

Now the distance is

s' = v x t

s' = 4.4 x 0.03 = 0.132 m

The total distance is

S = s + s' = 0.044 + 0.132 = 0.176 m

Answer:

Explanation:

An impulse results in a change of momentum.

The impulse is the product of a force and a distance. This will be represented by the area under the curve

a) W = ½(4.00)(3.00) = 6.00 J

b) W = (11.0 - 4.00)(3.00) = 21.0 J

c) W = ½(17.0 - 11.0)(3.00) = 9.00 J

d) ASSUMING the speed at x = 0 is in the direction of applied force

½(3.00)(v₄²) = ½(3.00)(0.450²) + 6.00

v₄ = 2.05 m/s

½(3.00)(v₁₇²) = ½(3.00)(0.450²) + 6.00 + 21.0 + 9.00

v₁₇ = 4.92 m/s

If the initial speed is NOT in the direction of applied force, the final speed will be slightly less in both cases.

Answer:

F = 1.128 10⁸ Pa

Explanation:

Pressure is defined by

         P = F / A

If the gas is ideal for equal force eds on all the walls, so on the piston area we have

        F = P A

We reduce the pressure to the SI system

       P = 150 kpa (1000 Pa / 1kPa = 150 103 Pa

we calculate

       F = 150 10³ / 0.00133

       F = 1.128 10⁸ Pa

Answer:

The correct answer is - c.  Spaceship will have a velocity to the East and will be slowing down.

Explanation:

In this case, if turned on thruster #2 then it will exert force on the west side as thruster 2 is on the east side and it can be understood by Newton's third law that says each action has the same but opposite reaction.

As the spaceship engine applies force on the east side then according to the law the exhauster gas applies on towards west direction. It will try to decrease the velocity of the spaceship however, the direction of floating still be east side initally.

Answer:

A curved mirror is a mirror with a curved reflecting surface. The surface may be either convex or concave. Most curved mirrors have surfaces that are shaped like part of a sphere, but other shapes are sometimes used in optical devices.

A convex mirror (or lens) is one constructed so that it is thicker in the middle than it is at the edge.

Answer:

L = 169.5 m

Explanation:

Using Ohm's Law:

V = IR

where,

V = Voltage = 1.5 V

I = Current = 10 mA = 0.01 A

R = Resistance = ?

Therefore,

1.5 V = (0.01 A)R

R = 150 Ω

But the resistance of a wire is given by the following formula:

[tex]R = \frac{\rho L}{A}[/tex]

where,

ρ = resistivity = 1 x 10⁻⁶ Ω.m

L = length of wire = ?

A = cross-sectional area of wire = πr² = π(0.6 mm)² = π(0.6 x 10⁻³ m)²

A = 1.13 x 10⁻⁶ m²

Therefore,

[tex]150\ \Omega = \frac{(1\ x\ 10^{-6}\ \Omega .m)L}{1.13\ x\ 10^{-6}\ m^2}\\\\L = \frac{150\ \Omega(1.13\ x\ 10^{-6}\ m^2)}{1\ x\ 10^{-6}\ \Omega .m}\\\\[/tex]

L = 169.5 m

Answer:

 emf = 312 V

Explanation:

In this exercise the electromotive force is asked, for which we must use Faraday's law

           emf =  [tex]- N \frac{d \Phi }{dt}[/tex]- N dfi / dt

           Ф = B. A = B A cos θ

bold type indicates vectors.

They indicate that the magnetic field is constant, the angle between the normal to the area and the magnetic field is parallel by local cosine values ​​1

It also indicates that the area is reduced from  a₀ = 0.325 me² to a_f = 0 in a time interval of ΔT = 0.100 s, suppose that this reduction is linear

            emf = -N B [tex]\frac{dA}{dT}[/tex]

            emf = - N B (A_f - A₀) / Dt

we calculate

           emf = - 60 1.60 (0 - 0.325) /0.100

           emf = 312 V

The direction of this voltage is exiting the page

Answer:

b = frequency

Answer:

The resolving power remains same.

Explanation:

The resolving power of the lens is directly proportional to the diameter of the lens not on the focal length.

As the diameter is same but the focal length is doubled so the resolving power remains same.

Blood comes into the right atrium from the body, moves into the right ventricle and is pushed into the pulmonary arteries in the lungs. After picking up oxygen, the blood travels back to the heart through the pulmonary veins into the left atrium, to the left ventricle and out to the body's tissues through the aorta.

Hope it helps you

Mark my answer as brainlist

have a nice day

Answer:

If decreased blood pressure is detected, the adrenal gland is stimulated by these stretch receptors to release aldosterone, which increases sodium reabsorption from the urine, sweat, and the gut. This causes increased osmolarity in the extracellular fluid, which will eventually return blood pressure toward normal.