A student swings back and forth from position A to C, as shown.

Which of the following happens when the swing moves from Position C to Position B?

A. Both potential energy and kinetic energy of the student increase.
B. Both potential energy and kinetic energy of the student decrease.
C. Potential energy of the student decreases and kinetic energy of the student increases.
D. Kinetic energy of the student decreases and potential energy of the student increases.

Answer:

Explosive eruptions from Composite or strato volcano

Explanation:

since they have multiple holes of exit, they can get pretty explosive.

Answer:

iv. N³⁻, O²⁻, F⁻, Na⁺, Mg²⁺

Explanation:

Isoelectronic elements are those that have the same number of electrons. So, if at least 2 elements differ in their number of electrons, the series is not of isoelectronic elements.

To know the number of electrons we will consider the atomic number and add electrons if it is an anion and subtract electrons it is a cation.

Identify the isoelectronic elements.

Characteristic properties are used because the sample size and the shape of the substance does not matter.

Answer:

2 K(s) + Cl₂(g) ⟶ 2 KCl(s)

2 Cu(s) + O₂(g) ⟶ 2 CuO(s)

Explanation:

Both reactions are synthesis reactions (two substances combine to form another).

Reaction: K(s) + Cl₂(g) ⟶

The product is the binary salt KCl. The balanced chemical equation is:

2 K(s) + Cl₂(g) ⟶ 2 KCl(s)

Reaction: Cu(s) + O₂(g) ⟶

The most likely product is the metal oxide CuO. The balanced chemical equation is:

2 Cu(s) + O₂(g) ⟶ 2 CuO(s)

Answer:

SO < CO2 < C3H8

Explanation:

Entropy refers to the degree of disorderliness of a system. The standard molar entropy of a substance refers to the entropy of 1 mole of the substance vunder standard conditions.

The molar entropy depends on the number of microstates in the system which in turn depends on the number of atoms in the molecule.

C3H8 has 11 atoms and hence the highest number of microstates followed by CO2 having three atoms and least of all SO having only two atoms.

Answer:

Im sorry i cant write a whole essay right now but these sourcea could help.

https://climate.nasa.gov/effects/

https://www.climate.gov/news-features/understanding-climate/climate-change-global-temperature

Answer:

have you done it yet?

Explanation:

..

Answer: The correct answer is Protein B.

Explanation:

Gel-filtration chromatography is a separation technique that is based on the size of the molecules in a compound. It is also known as size-exclusion chromatography in which the eluent (carrier) used is an aqueous solution.

The matrix that is used is a porous material. When the sample is inserted in the column, the smaller particles interact strongly with the matrix than the large ones. Thus, as the eluent is passed through the matrix, larger molecules come out first, and the smallest molecule comes out last.

Given sizes of the proteins:

Protein A: 1200 kDa

Protein B: 2000 kDa

Protein C: 800 kDa

As protein B has the largest size of all the given proteins, it will emerge out first from the column.

Hence, the correct answer is Protein B.

Hydrogen sulfide ions, dihydrogen phosphate, and water are amphoteric. Therefore, option (a), (c), and (d) are correct.

Amphoteric can be stated as any compound that can be mixed with other compounds both as a base and an acid. Water is amphoteric as it can be transformed into a compound that can be mixed as an alkali or an acid.  

Amphoterism is explaining the reactivity of a compound that indicates alkaline nature when mixed with an acid and describes acidic characteristics in an alkaline environment.

When acid reacts with water, it forms H₃O⁺ ion adding an H⁺ ion from the acid. When water is combined with a base, it donates a hydrogen H⁺ ion to the base and releases a hydroxide ion.

Besides water, there are many oxides and hydroxides are utilized in amphoterism. The substances that have both characteristics acids are proton donors and bases are proton acceptors are identified as amphoteric substances.

Therefore, HS⁻, H₂O, and H₂PO₄⁻ are amphoteric in nature.

Learn more about amphoteric, here:

https://brainly.com/question/2908795

#SPJ5

Answer:

n = 0.21 moles

Explanation:

Given that,

Volume, V = 0.84 L

Pressure, P = 4.6 atm

T = 222 K

We need to find the number of moles of Neon gas. We know that,

PV = nRT

Where

n is the number of moles

R i the gas constant, R = 0.08206 L-atm/mol-K

Put all the values,

[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{4.6\times 0.84}{0.08206 \times 222}\\\\n=0.21\ \text{moles}[/tex]

So, there are 0.21 moles of Neon gas.

Answer:

11 protons 10 neutrons 11 electron

13 protons 14 neutrons 13 electrons

Explanation:

Isotopes are atoms of the same element having same atomic number but different mass numbers.

Answer:

yes the experimental result is the expected result .

Explanation:

When Titrating acetate buffer with acid the PH will decrease gradually from a more neutral PH to a more acidic level and this is because buffer solutions are prepared with weak acids and its conjugate base.

The results gotten from the continuous addition of base NaOH to the acetate buffer is the expected result because the base is been absorbed by the buffer solution and it is converted to a conjugate base of the buffer solution which will gradually increase the PH level of the solution as more conjugate base is formed due to the addition of more NaOH.  

Answer: trial b

Explanation:

Answer:

Molarity: 0.092M

Molality: 0.090m

Explanation:

Molarity, M, is defined as the moles of solute (In this case, C14H12 -Molar mass: 180.25g/mol-) in 1L of solution.

The molality, m, are moles of solute per kg of solvent.

Molarity:

Moles solute:

7.9g * (1mol/180.25g) = 0.04383 moles

Liters solution:

475mL = 0.475L

Molarity: 0.04383 moles / 0.475L = 0.092M

Molality:

kg solvent:

475mL * (1.03g/mL) = 489.25g = 0.48925kg

Molality:

0.04383 moles / 0.48925kg = 0.090m

Answer:

a) will react with water: K

b) will react with steam or acid, but not water: Cr & Sn

d) will not react with water, steam, or acid: Cu

Explanation:

K reacts violently with water.

Cr will react with steam to form an oxide + H gas and will react with most acids

Sn will react with steam to form SnO₂ + H gas and, though it does not react as rapidly as other metals in acid, it dissolves easily in concentrated acids

Cu is an extremely nonreactive metal, which is what makes it so suitable for wiring

Answer:

a. True

Explanation:

From the basic concepts of acids and bases, we know that when a base accepts a hydrogen ion (H⁺), it forms a conjugate acid which can accept again the H⁺ ion:

B⁻ + H₂O ⇆ BH + OH⁻

The stronger the base, the weaker the conjugate base. Thus, as more strength has a base, lesser strength will have the conjugate base (it will not be able to accept again the H⁺ ion). For example, when water (H₂O) loses its H⁺ , it forms the conjugate base OH⁻. So, OH⁻ is the stronger base that can exist in an aqueous solution.

H₂O ⇆ H⁺ + OH⁻

In fact, strong bases are hydroxides, such as NaOH or KOH.

Answer:

The mechanical properties of urea formaldehyde resins may be improved by incorporating therein polyvinyl alcohol. The polyvinyl alcohol may be incorporated during pre-mixing, mid mixing, and/or post mixing of the resin components. Resins prepared using polyvinyl alcohol are particularly desirable in articles requiring improved mechanical strength and water resistance, as compared to similar resins prepared without the polyvinyl alcohol such as shingles.

Answer:

0.10 M Ca(CH3COO)2- Less soluble than in pure water.

0.10 M K2SO3- Less soluble than in pure water.

0.10 M NaNO3 - More soluble than in pure water.

0.10 M KCH3COO- Similar solubility as in pure water.

Explanation:

We have to cast our minds back to the idea of common ions effect. If any ion is already present in solution, the presence of that ion in solution prevents any solute containing a common ion with the solution from dissolving in that solution. In order words, the presence of a common ion makes a solute less soluble in a solvent than it is in pure water.

For instance, 0.10 M Ca(CH3COO)2 and K2SO3 both contain Ca^2+ and SO3^2- ions respectively which are also contained in the solute calcium sulfite.

The presence of these common ions in solution makes calcium sulfite less soluble in these solutions than it is in pure water because the equilibrium position for the dissolution of the solute lies towards the left hand side.

However, calcium sulfite is more soluble in 0.10 M NaNO3 than in pure water due to displacement reaction between the ions in solution.

The solubility of calcium sulfite and 0.10 M KCH3COO in pure water is quite comparable.

Answer: here you go

Explanation:

Physical properties of the substances in a mixture are different, so this allows the substances to be separated. Think about the example of a mixture of salt water.

Answer:

Mixtures can be classified on the basis of particle size into three different types: solutions, suspensions, and colloids. The components of a mixture retain their own physical properties. These properties can be used to separate the components by filtering, boiling, or other physical processes.

Explanation:

Answer:

B

Explanation:

hợp chất nào có khả năng là hợp chất ion cao nhất ?

A Al2O3?

B

Answer:

true once light has been produce it will keep travelling jn straight parts until it hits something else

Answer:

NaCl

Explanation:

[tex]na + cl > nacl[/tex]

This is also a salt

Explanation:

Iron atom is been oxidised as it losses 2 electron to form 2 + ion.

Answer:

The tasks which form the preliminaries to a descriptive investigation are: Making careful objective observations. Asking the relevant scientific questions.

Answer:

Carbon is dull, have a low density, and are poor conductors of heat.

Explanation:

Carbon is a non-metal, therefore bearing properties of a non-metal element.