a system of equations is shown below.
y=3x+5
x + y=-7

Answer:

Step-by-step explanation:

[tex]y=2x-4[/tex]    (slope-intercept form is [tex]y=mx+b[/tex] where m=gradient

                     and b is where line intercepts y-axis)

The coordinates of A' and B' after a dilation with a scale factor of 5 and a center point of dilation at the origin are A'(5, 10) and B'(-10, -5), respectively.

To find the coordinates of the points A' and B' after a dilation with a scale factor of 5 and a center point of dilation at the origin, we can use the following formula:

[tex]$$(x', y') = (5(x - 0), 5(y - 0)) = (5x, 5y)$$[/tex]

where (x, y) are the original coordinates of the point, and (x', y') are the new coordinates after the dilation.

For point A(1, 2), the new coordinates A' are:

[tex]$$(x_A', y_A') = (5(1), 5(2)) = (5, 10)$$[/tex]

Therefore, the coordinates of point A' are (5, 10).

For point B(-2, -1), the new coordinates B' are:

[tex]$$(x_B', y_B') = (5(-2), 5(-1)) = (-10, -5)$$[/tex]

Therefore, the coordinates of point B' are (-10, -5).

Therefore, the coordinates of A' and B' after a dilation with a scale factor of 5 and a center point of dilation at the origin are A'(5, 10) and B'(-10, -5), respectively.

To know more about Dilation factor visit:

brainly.com/question/10617018

#SPJ1

The workload of the resource is 20.5 units.

To calculate the workload of a resource that serves different flow unit types, one must know the amount of flow units, the processing time for each flow unit, and the number of resources available. This is best calculated using Little's Law, which states that the average number of flow units in a system is equal to the average rate of flow units multiplied by the average time they spend in the system.

For example, if a resource is serving 3 flow unit types, A, B and C, with 10, 8 and 5 units respectively, and a processing time of 2 minutes, 1 minute and 3 minutes respectively, with 2 resources available, the workload can be calculated as follows:

Workload = (10*2 + 8*1 + 5*3) / 2

       = 41 / 2

       = 20.5 units

Therefore, the workload of the resource is 20.5 units.

Learn more about average time here:

https://brainly.com/question/23692925

#SPJ4

Complete question

What are the flow unit types that the resource is serving?

Answer:

g

Step-by-step explanation:

The given expression is arcsin (-√3/2), which represents the angle whose sine is equal to -√3/2. Recall that the range of the arcsin function is from -π/2 to π/2 radians, so we can narrow down the possible solutions to the second and third quadrants.

Since the sine function is negative in the third quadrant, we can start by considering the angle 4π/3, which is in the third quadrant and has a sine of -√3/2:sin(4π/3) = -√3/2

However, we need to check if there are any other angles in the second or third quadrants that satisfy the equation. Recall that sine is periodic with a period of 2π, so we can add or subtract any multiple of 2π to the angle and still obtain the same sine value.

In the second quadrant, we can use the reference angle π/3 to find the corresponding angle with a negative sine:

sin(π - π/3) = sin(2π/3) = √3/2

This angle does not satisfy the equation, so we can eliminate it as a possible solution.In the third quadrant, we can use the reference angle π/3 to find another possible solution:

sin(π + π/3) = sin(4π/3) = -√3/2

This confirms our initial solution of 4π/3, so the answer is (g) 4π/3.

Let me know if this helped by hitting brainliest! If you have a question, please comment and I"ll get back to you ASAP!

Answer:

We know that sin(π/3) = √3/2, so we can write:

arcsin(-√3/2) = -π/3 + 2nπ or π + π/3 + 2nπ

where n is an integer.

Therefore, the values of arcsin(-√3/2) are:

a. π/3 + 2nπ

c. 11π/6 + 2nπ

e. 2π/3 + 2nπ

f. 7π/6 + 2nπ

So, options a, c, e, and f are all correct.

The shear force and bending moment diagrams for the given beam will have multiple segments of different shapes and slopes, reflecting the variation of loads along the length of the beam.

To construct the shear and bending diagrams for the given beam, we need to analyze the beam for the different sections where the load is applied. We can break down the beam into five sections:

Leftmost section (0 ≤ x ≤ L/4)

Second section (L/4 < x ≤ L/2)

Third section (L/2 < x ≤ 5L/12)

Fourth section (5L/12 < x ≤ 7L/12)

Rightmost section (7L/12 < x ≤ L)

We can use the equations for shear and bending moments to create the plots:

For section 1: 0 ≤ x ≤ L/4

The shear force diagram will be constant since there is no load applied in this section. The bending moment diagram will be a sloping line, which will be zero at x = 0 and will increase linearly with x as we move toward the right end of the section.

For section 2: L/4 < x ≤ L/2

The shear force diagram will start from the value of P at x = L/4 and remain constant up to x = L/2. The bending moment diagram will be a parabolic curve, which will be zero at x = L/4 and L/2 and will reach a maximum value at the midpoint of the section.

For section 3: L/2 < x ≤ 5L/12

The shear force diagram will start from the value of P at x = L/4 and remain constant up to x = L/2. At x = 5L/12, a load of P/3 is added, causing the shear force to increase suddenly. The bending moment diagram will be a cubic curve, which will be zero at x = L/4 and L/2, and will have a local minimum at x = 5L/12.

For section 4: 5L/12 < x ≤ 7L/12

The shear force diagram will start from the value of P + P/3 at x = 5L/12 and remain constant up to x = 7L/12. The bending moment diagram will be a cubic curve, which will be zero at x = L/4 and L/2, and will have a local maximum at x = 7L/12.

For section 5: 7L/12 < x ≤ L

The shear force diagram will start from the value of P + P/3 at x = 5L/12 and remain constant up to x = 7L/12. At x = L/3, a load of P/3 is added, causing the shear force to decrease suddenly. The bending moment diagram will be a parabolic curve, which will be zero at x = L/4 and L/2 and will reach a minimum value at the midpoint of the section.

Find out more about the shear force

brainly.com/question/29664085

#SPJ4

Answer:

The answer is C

Step-by-step explanation:

Assuming this is a fair coin, the theoretical probability of the coin going on one side, let's say heads, is 50%, or 0.5. So what's the chance the coin lands head 5 times? To do this we do 0.5^5 OR 0.5*0.5*0.5*0.5*0.5. Both of these answers equal 0.03125. So C is the Answer. Hope this helps :D

The middle 50% data of the boxplot will be calculated between the value of 7 to 14.

The data set ranges are:

4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17

Divide the given data in 4 quartiles Qs;

Q1 = 4 - 6

Q2 = 7 - 10

Q3 = 11 - 14

Q4 = 15 - 17

Thus, 50% data will be lying in Q2 and Q3.

Range - 7 - 14

Thus, the middle 50% data of the box plot will be calculated between the value of 7 to 14.

Know more about the box plot

https://brainly.com/question/14277132

#SPJ1

Accοrding tο the data, the answers tο Questiοns 1 and 2 are: Harris shοuld anticipate spinning a sum οr less 10 apprοximately 367 times and a tοtal that is 10 οr larger apprοximately 133 times.

Yοur example is an equatiοn since an equatiοn that's any statement with an equal's sign. The usage οf equatiοns in mathematical expressiοns is widespread because mathematicians adοre equal signs. An equatiοn is a cοllectiοn οf guidelines fοr prοducing a specific οutcοme.

Part A: Tο calculate the likelihοοd that Harris will spinning a sum οr less 10, multiply the οverall number οf spins by the chance οf οbtaining a sum οr less 10. The οutcοmes οf the first spinner's spin are 1, 2, and 3, while the results οf the secοnd spinner's spin are 4, 5, 6, 7, and 8. Hence, the amοunts οr less 10 are:

1 + 4 = 5

1 + 5 = 6

1 + 6 = 7

1 + 7 = 8

1 + 8 = 9

2 + 4 = 6

2 + 5 = 7

2 + 6 = 8

2 + 7 = 9

3 + 4 = 7

3 + 5 = 8

3 + 6 = 9

There are 11 amοunts that cοuld be less than ten. The number οf successful results divided by the entire number οf pοssibilities, which is 11/15, represents the likelihοοd οf receiving a payοut οf less than 10 in a single spin. Harris will therefοre spin a tοtal less than 10 times, and the equatiοn tο estimate this is:

11/15 = x/500

After finding x, we οbtain:

x = (11/15) x 500

x = 366.67, which rοunds up tο 367

Sο, Harris shοuld expect tο spin a sum less than 10 abοut 367 times.

Part B: Tο determine hοw frequently Harris shοuld anticipate spinning a sum οf ten οr mοre, we can deduct the times that he shοuld anticipate spinning a sum lοwer than ten frοm the οverall number οf spins:

500 - 367 = 133

Therefοre, Harris shοuld expect tο spin a sum that is 10 οr greater abοut 133 times.

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ1

Answer:

To write an exponential decay function for this situation, we can use the formula:

P(t) = P₀e^(rt)

where:

P(t) = the population at time t

P₀ = the initial population

r = the annual rate of decrease (as a decimal)

t = time in years

We are given P₀ = 3,846 and r = -0.0027 (since the population is decreasing).

To approximate the population in 2022, we need to find t, the number of years from 1996 to 2022. That is:

t = 2022 - 1996 = 26 years

Now we can plug in the values we have:

P(t) = 3,846 e^(-0.0027t)

To find P(2022), we plug in t = 26:

P(26) = 3,846 e^(-0.0027(26))

≈ 3,200.62

Therefore, we can approximate the population of the city in 2022 to be about 3,201 people.

Answer:

3,101

Step-by-step explanation:

Please hit brainliest if this helped!

To write an exponential decay function for the population of the city, we can use the formula:

P(t) = P₀e^(-rt)

where P(t) is the population at time t, P₀ is the initial population, r is the decay rate, and e is the base of the natural logarithm.

In this problem, P₀ = 3,846 and r = 0.0027 (0.27% expressed as a decimal). We want to find the population in 2022, which is 26 years after 1996.To use the formula, we need to convert 26 years to the same time units as the decay rate. Since the decay rate is per year, we can use 26 years directly. Therefore, the exponential decay function for the population is:

P(t) = 3,846e^(-0.0027t)

To find the population in 2022 (t = 26), we substitute t = 26 into the function:

P(26) = 3,846e^(-0.0027*26) ≈ 3,101

Therefore, the population in 2022 is approximately 3,101.

Let me know if this helped by hitting brainliest! If you have any questions, comment below and I"ll get back to you ASAP.

Answer:

B. $6 per part

Step-by-step explanation:

The average cost per part can be computed as follows

Average Cost = (324-300)/(104-100)

= 24/4

=$6

Answer: B. $6 per part

Answer:

x = ±10

Step-by-step explanation:

1) Subtract 10 from both sides.

[tex]-0.1 \times x^2=-10[/tex]

2) Divide both sides by -0.1.

[tex]x^2=\frac{-10}{-0.1}[/tex]

3) Simplify [tex]\frac{-10}{-0.1}[/tex] to 100.

[tex]x^2=100[/tex]

4) Take the square root of both sides.

[tex]x=\pm \sqrt{100}[/tex]

5) Since 10 * 10 is 100, the square root of 100 is 10.

[tex]x=\pm10[/tex]

Step-by-step explanation:

To find the maximum/minimum value of the quadratic function q² + 22q = y - 85, we can complete the square as follows:

q² + 22q = y - 85

q² + 22q + 121 = y - 85 + 121 (adding (22/2)² = 121 to both sides)

(q + 11)² = y + 36

Now, we have a square of a binomial on the left side, which means the minimum value of the quadratic function is y + 36, and it occurs when (q + 11) = 0. Thus, the minimum value is:

y + 36 = 36 - 85 = -49

Similarly, the maximum value of the quadratic function occurs when (q + 11) = 0, but this time the value of y will be as large as possible. The largest possible value of y occurs when STU is a permutation of the digits 9, 8, and 7 (since PQR must be 4, 0, and 3 in some order). Thus, the maximum value is:

y + 36 = 9 + 8 + 7 - 85 + 36 = -25

Therefore, the options are incorrect and the correct answers are:

Minimum value: -49

Maximum value: -25

The homotopy classes of paths from x to x in a space X refer to a set of equivalence classes of continuous paths that start and end at the same point, x, in the space X, where equivalence is defined in terms of homotopy.

In other words, for any two paths, there exists a continuous transformation (called a homotopy) between them such that the endpoints remain fixed. Two paths are said to be homotopic if they can be continuously deformed into each other while keeping their endpoints fixed. The set of all paths that are homotopic to each other forms an equivalence class.

The homotopy classes of paths from x to x are important in algebraic topology, as they provide a way to study the topological structure of a space by analyzing the properties of the paths within it. They can also be used to define higher algebraic structures such as the fundamental group and higher homotopy groups.

Learn more about paths on;

https://brainly.com/question/17106945

#SPJ1

Answer:

125

Step-by-step explanation:

We Take

625 / 5 = 125

So, the answer is 125

The properties of a probability distribution for a discrete random variable ensure that the probabilities assigned to each possible value of the variable are consistent with the axioms of probability and allow for meaningful inference and prediction.

The properties of a probability distribution for a discrete random variable are.

The probability of each possible value of the random variable must be non-negative.

The sum of the probabilities of all possible values must equal 1.

The probability of any event A is the sum of the probabilities of the values in the sample space that correspond to A.

These properties are satisfied because the probabilities of each possible value of a discrete random variable are defined in such a way that they are non-negative and sum to 1. Additionally, any event A can be expressed as a collection of possible values of the random variable, and the probability of A is then computed as the sum of the probabilities of those values.

To know more about probability distribution:

https://brainly.com/question/14210034

#SPJ4

The distance Jamie will run is equal to half of the rate in kilometers per hour, the equation is d = r (1/2)

Speed is a scalar number that represents the rate of movement of an item. It is described as the distance covered in a certain amount of time, regardless of direction. In contrast, velocity is a vector quantity that accounts for both speed and direction. It is characterised as the pace at which an item shifts in a certain direction. In physics, the idea of velocity is crucial since it aids in explaining how an object's location varies over time and is used to compute other crucial variables like acceleration and momentum.

The distance is calculated using the given formula:

Distance = rate (time)

Given that, the time is 1/2 hour thus:

d = r (1/2)

Thus, the distance Jamie will run is equal to half of the rate in kilometers per hour, and the equation is d = r (1/2).

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ1

The average rate of change is 5π; for r changing from 2 to 2.5, it is 2.5π, and for r changing from 2 to 2.1, it is 4.1π.

The area of a circle is given by the formula A = πr². To find the average rate of change of A with respect to r, we can take the derivative of A with respect to r:

dA/dr = 2πr

This tells us how much the area changes for a small change in the radius. To find the average rate of change over a larger interval, we can use the formula:

ΔA/Δr = (A2 - A1)/(r2 - r1)

where A1 and A2 are the areas at the initial and final radii, and r1 and r2 are the initial and final radii.

(i) For r changing from 2 to 3:

ΔA/Δr = (π(3)² - π(2)²)/(3 - 2) = 5π

The average rate of change of the area with respect to the radius is 5π.

(ii) For r changing from 2 to 2.5:

ΔA/Δr = (π(2.5)² - π(2)²/(2.5 - 2) = 2.5π

The average rate of change of the area with respect to the radius is 2.5π.

(iii) For r changing from 2 to 2.1:

ΔA/Δr = (π(2.1)² - π(2)²)/(2.1 - 2) = 4.1π

The average rate of change of the area with respect to the radius is 4.1π.

Learn more about rate of change here: brainly.com/question/29518179

#SPJ4

We cannot determine the actual value of the average rate of change without knowing the function f(x) or having a graph of the function.

The visual representation of mathematical functions or data points on a Cartesian coordinate system is an x-y axis graphic. The vertical or dependent variable is represented by the y-axis, while the horizontal or independent variable is represented by the x-axis. The difference between the change in output values and the change in input values is known as the average rate of change of a function over a period.

Let's assume that the function is denoted by f(x). Then, the average rate of change on the interval (a, b) can be calculated as

average rate of change = (f(b) - f(a)) / (b - a)

Using this formula, we can calculate the average rate of change on the given intervals as follows:

For the interval (-3, -2):

average rate of change = [tex]\frac{[f(-2) - f(-3)]}{[-2 - (-3)]}[/tex]

For the interval (1, 3):

average rate of change = [tex]\frac{(f(3) - f(1))}{(3 - 1)}[/tex]

For the interval (-1, 1):

average rate of change = [tex]\frac{(f(1) - f(-1))}{ (1 - (-1))}[/tex]

Note that we cannot determine the actual value of the average rate of change without knowing the function f(x) or having a graph of the function. If you provide the function or the graph, I can help you find the actual values of the average rate of change on these intervals.

To know more about plot, visit:

https://brainly.com/question/30195492

#SPJ1

By linear equality , g >1.5 is must be true.

What are equality and inequality along a line?

Equal (=) is the symbol used in linear equations. Example. Using the inequality symbols (>,, is greater than or equal to, and is less than or equal to), linear inequalities are expressed.

                          x - 5 > 3x - 10 is an illustration of a linear inequality. As the larger than symbol is employed in this inequality, the LHS is strictly greater than the RHS. After being solved, the inequality appears as 2x 5 x (5/2).

If h> 3 and h - 2g= 0

H=2g

2g>3

g >1.5

Learn more about linear equality

brainly.com/question/11874554

#SPJ1

Answer:

Math Quotient Verification

G For each ordered pair, determine whether it is a solution to the system of equations. 9x+2y=-5 2x-3y=-8 (x, y) (1, -7) (0, -4) (5,6) (-1,2) Is it a solution? Yes No X 5

To check if an ordered pair is a solution to a system of equations, we substitute the values of x and y into both equations and see if both equations are satisfied.

Let's check each ordered pair one by one:

(1, -7):

9x + 2y = -5 becomes 9(1) + 2(-7) = -5, which is false.

2x - 3y = -8 becomes 2(1) - 3(-7) = -8, which is true.

Therefore, (1, -7) is not a solution to the system of equations.

(0, -4):

9x + 2y = -5 becomes 9(0) + 2(-4) = -8, which is false.

2x - 3y = -8 becomes 2(0) - 3(-4) = 12, which is false.

Therefore, (0, -4) is not a solution to the system of equations.

(5, 6):

9x + 2y = -5 becomes 9(5) + 2(6) = 41, which is false.

2x - 3y = -8 becomes 2(5) - 3(6) = -8, which is true.

Therefore, (5, 6) is not a solution to the system of equations.

(-1, 2):

9x + 2y = -5 becomes 9(-1) + 2(2) = -11, which is false.

2x - 3y = -8 becomes 2(-1) - 3(2) = -8, which is true.

Therefore, (-1, 2) is not a solution to the system of equations.

Therefore, the answer is "No" for all the ordered pairs given in the problem.

(please mark my answer as brainliest)

P = 2 is the answer to the equation 2(p + 4) = 12.

An expression is made up of a number, a variable, or a combination of a number, a variable, and operation symbols. Two expressions are combined into one equation by using the equal symbol. For illustration: When you add 8 and 3, you get 11.

Divide the two among the terms between the parenthesis:

2p + 8 = 12

Add 8 to both sides of the equation, then subtract 8:

2p + 8 - 8 = 12 - 8

2p = 4

multiply both sides by two:

2p/2 = 4/2 \sp = 2

p = 2 is the answer to the equation 2(p + 4) = 12 as a result.

Simply put p = 2 back into the equation and simplify to obtain p + 4:

[tex]p + 4 = 2 + 4 = 6[/tex]

Hence, p + 4 = 6.

To know more about equation visit:-

https://brainly.com/question/29657983

#SPJ1

The value of b is 73° as opposite angles of congruent sides are equal in an isosceles triangle.

An angle is created by cοmbining twο rays (half-lines) that have a cοmmοn terminal. The angle's vertex is the latter, while the rays are alternately referred tο as the angle's legs and its arms.

An angle within a shape that has the shape's base as οne οf its sides is knοwn as the base angle οf a shape in geοmetry. Cοnsider the triangle in the image as an example. We can οbserve that the triangle's base side is made up οf an angle B side and an angle C side. As a result, the triangle's base angles are angles B and C.

To know more about complimentary angles visit:-

brainly.com/question/20693383

#SPJ1

The simplification of the given expression

[tex]y = ( \sqrt{47 + \sqrt{9 - \sqrt{25)} } } [/tex]

is y = 7

[tex]y = ( \sqrt{47 + \sqrt{9 - \sqrt{25)} } } [/tex]

find the square root of 25

[tex]y =( \sqrt{47 + \sqrt{9 - 5} } [/tex]

simplify root 9 - 5

[tex]y = ( \sqrt{47 + \sqrt{4} } [/tex]

find the square root of 4

[tex]y = ( \sqrt{47 + 2)} [/tex]

Add root 47 and 2

[tex]y = ( \sqrt{49} )[/tex]

Find the square root of 49

y = 7

Therefore, the solution to the given expression is y = 7

Read more on simplification:

https://brainly.com/question/723406

#SPJ1

The answer will of given mathematical logic will be T F T T F respectivelly.

A negation, conjunction, and disjunction are the fundamental mathematical logics. The symbols for negation, conjunction, and disjunction in mathematical logic are "," "," and "v," respectively.

Logical proofs frequently employ mathematical logic. Proofs are legitimate arguments that establish the veracity of mathematical assertions. A series of statements make up an argument. The conclusion is the last assertion, and the premises are all the statements that came before it (or hypothesis).

To know more about mathematical logic visit:-

brainly.com/question/28052598

#SPJ1

The complete truth table is shown in the below diagram.

≈ q → ≈ p: True  False  True  True

The contrapositive of a conditional statement is a new conditional statement that is formed by negating both the hypothesis (the "if" part) and the conclusion (the "then" part) of the original statement, and switching their positions. The truth table for the contrapositive of a conditional statement has the same number of rows as the truth table for the original statement.

For example, if the original statement is "If it is raining, then the ground is wet", then the contrapositive would be "If the ground is not wet, then it is not raining."

According to the given table the contrapositive of a conditional statement q and p is defines as;

True

False

True

True

To know more about conditional statement, visit:

https://brainly.com/question/27839142

#SPJ1

Answer:

Step-by-step explanation:

To solve this problem, we can use the formula for the Pythagorean theorem, which states that for any right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

In this case, we are given the length of two sides of the triangle (the legs) and we need to find the length of the hypotenuse.

Let's label the sides of the triangle:

The shorter leg is the vertical side opposite the angle marked 55 degrees, so let's call it "a".

The longer leg is the horizontal side adjacent to the angle marked 55 degrees, so let's call it "b".

The hypotenuse is the side opposite the right angle, so let's call it "c".

Using trigonometry, we can determine the value of "a" and "b":

a = b * tan(55°) (since tangent = opposite/adjacent, we solve for opposite which is "a" in this case)

a = 100 * tan(55°) = 100 * 1.428 = 142.8

b = 100

Now, we can use the Pythagorean theorem to find the length of the hypotenuse:

c^2 = a^2 + b^2

c^2 = 142.8^2 + 100^2

c^2 = 20484.84 + 10000

c^2 = 30484.84

c = sqrt(30484.84)

c ≈ 174.6

Therefore, the length of the hypotenuse is approximately 174.6 units (the units are not given in the problem, but we can assume they are consistent with the units used for the given values of "a" and "b").

The problem does not specify the orientation or scale of the graph, but we can assume that it is a right triangle with the angle marked 55 degrees in the upper left corner.

The vertical side (the shorter leg) of the triangle should be labeled with a length of approximately 142.8 units (assuming the units used for the problem are consistent with the values given for "a" and "b"). The horizontal side (the longer leg) should be labeled with a length of 100 units.

The hypotenuse (the side opposite the right angle) should be drawn as a diagonal line connecting the endpoints of the vertical and horizontal sides. The hypotenuse should be labeled with a length of approximately 174.6 units.

The angle marked 55 degrees should be labeled as such, and the other two angles of the triangle (the right angle and the angle opposite the longer leg) should be labeled accordingly.

Answer:

f'(x) = -6x^2

f'(-5) = -150

f'(0) = 0

f'(√17) = -102

Answer:

Step-by-step explanation:

your given is not cleared repost it then post

Answer:

A. The volume of the triangular prism can be calculated using the formula V = (1/2)bh × h, where b is the base of the triangular face and h is the height of the prism. Thus, V = (1/2)(7 cm)(10 cm) × 20 cm = 700 cubic centimeters.

B. If the height of the prism is tripled to 60 cm, then the new volume would be V' = (1/2)(7 cm)(10 cm) × 60 cm = 2100 cubic centimeters. Thus, the volume is tripled.

C. If the base of the triangular face is tripled to 21 cm, then the new volume would be V' = (1/2)(21 cm)(10 cm) × 20 cm = 2100 cubic centimeters. Thus, the volume is tripled.

D. If the height of the triangular face is tripled to 30 cm, then the new volume would be V' = (1/2)(7 cm)(30 cm) × 20 cm = 2100 cubic centimeters. Thus, the volume is tripled.

E. If all three dimensions (base, height of triangular face, and height of prism) are tripled, then the new volume would be V' = (1/2)(21 cm)(30 cm) × 60 cm = 18900 cubic centimeters. Thus, the volume is multiplied by a factor of 27.

Answer:

I don't knowI am sorry I will let someone else answer

Step-by-step explanation:

Answer: (f⋅g)(1) = 10.

Step-by-step explanation:

To find (f⋅g)(x), we need to multiply the two functions f(x) and g(x) together. This can be done by multiplying each term of f(x) by each term of g(x), and then combining like terms. We get:

(f⋅g)(x) = f(x) * g(x)

= (-7x+3) * (3x^2 - 4x - 1)

= -21x^3 + 28x^2 + x - 3x^2 + 4x + 1

= -21x^3 + 25x^2 + 5x + 1

To find (f⋅g)(1), we can substitute x=1 into the expression for (f⋅g)(x):

(f⋅g)(1) = -21(1)^3 + 25(1)^2 + 5(1) + 1

= -21 + 25 + 5 + 1

= 10

Therefore, (f⋅g)(1) = 10.