A text file has been transferred from a Windows system to a Unix system, leaving it with the wrong line termination. This mistake can be corrected by

Answer:

You'll need dual monitor cables and an adapter.

Explanation:

First Step

Position your monitors on your desk or workspace. Make sure the systems are off.

Second Step

Make sure your power strip is close by. Then plug your power strip and connect the first monitor to your PC via your HDMI

Use an adapter to do the same for the second monitor.

Turn the entire system on

Third Step

On your PC, right click on a blank place in your home screen and click on Display Settings.

If you want to have two separate displays showing the same thing, select Duplicate, but if you want to have the two displays independent of each other, select Extend Display.

Apply the settings and select Done.

Answer:

Complete the program with the following code segment

for(int i =0;i<=3;i++)

{

cout<<offsetAmount[i]+origList[i]<<" ";

}

return 0;

}

Explanation:

The following line is an iteration of variable i from 1 to 3; It iterates through elements of origList and offsetAmount

for(int i =0;i<=3;i++){

This adds and prints the corresponding elements of origList and offsetAmount

cout<<offsetAmount[i]+origList[i]<<" ";

}  The iteration ends here

Answer:

1)

for(i = 0; i < NUM_VALS; ++i) {

  if(userValues[i] == matchValue) {

     numMatches++;  }    }

2)  

for (i = 0; i < NUM_GUESSES; i++) {

      scanf("%d", &userGuesses[i]);   }

  for (i = 0; i < NUM_GUESSES; ++i) {

         printf("%d ", userGuesses[i]);    }

3)

sumExtra = 0;

for (i = 0; i < NUM_VALS; ++i){

     if (testGrades[i] > 100){  

        sumExtra = testGrades[i] - 100 + sumExtra;    }       }

4)

for (i = 0; i < NUM_VALS; ++i) {

    if (i<(NUM_VALS-1))  

   printf( "%d,", hourlyTemp[i]);

    else  

    printf("%d",hourlyTemp[i]); }      

Explanation:

1) This loop works as follows:

1st iteration:

i = 0

As i= 0 and NUM_VALS = 4 This means for condition i<NUM_VALS  is true so the body of loop executes

if(userValues[i] == matchValue) condition checks if element at i-th index position of userValues[] array is equal to the value of matchValue variable. As matchValue = 2 and i = 0 So the statement becomes:

userValues[0] == 2

2 == 2

As the value at 0th index (1st element) of userValues is 2 so the above condition is true and the value of numMatches is incremented to 1. So numMatches = 1

Now value of i is incremented to 1 so i=1

2nd iteration:

i = 1

As i= 1 and NUM_VALS = 4 This means for condition i<NUM_VALS  is true so the body of loop executes

if(userValues[i] == matchValue) condition checks if element at i-th index position of userValues[] array is equal to the value of matchValue variable. As matchValue = 2 and i = 1 So the statement becomes:

userValues[1] == 2

2 == 2

As the value at 1st index (2nd element) of userValues is 2 so the above condition is true and the value of numMatches is incremented to 1. So numMatches = 2

Now value of i is incremented to 1 so i=2

The same procedure continues at each iteration.

The last iteration is shown below:

5th iteration:

i = 4

As i= 4 and NUM_VALS = 4 This means for condition i<NUM_VALS  is false so the loop breaks

Next the statement: printf("matchValue: %d, numMatches: %d\n", matchValue, numMatches);  executes which displays the value of

numMatches = 3

2)

The first loop works as follows:

At first iteration:

i = 0

i<NUM_GUESSES is true as NUM_GUESSES = 3 and i= 0 so 0<3

So the body of loop executes which reads the element at ith index (0-th) index i.e. 1st element of userGuesses array. Then value of i is incremented to i and i = 1.

At each iteration each element at i-th index is read using scanf such as element at userGuesses[0], userGuesses[1], userGuesses[2]. The loop stops at i=4 as i<NUM_GUESSES evaluates to false.

The second loop works as follows:

At first iteration:

i = 0

i<NUM_GUESSES is true as NUM_GUESSES = 3 and i= 0 so 0<3

So the body of loop executes which prints the element at ith index (0-th) index i.e. 1st element of userGuesses array. Then value of i is incremented to i and i = 1.

At each iteration, each element at i-th index is printed on output screen using printf such as element at userGuesses[0], userGuesses[1], userGuesses[2] is displayed. The loop stops at i=4 as i<NUM_GUESSES evaluates to false.

So if user enters enters 9 5 2, then the output is 9 5 2

3)

The loop works as follows:

At first iteration:

i=0

i<NUM_VALS is true as NUM_VALS = 4 so 0<4. Hence the loop body executes.

if (testGrades[i] > 100 checks if the element at i-th index of testGrades array is greater than 100. As i=0 so this statement becomes:

if (testGrades[0] > 100

As testGrades[0] = 101 so this condition evaluates to true as 101>100

So the statement sumExtra = testGrades[i] - 100 + sumExtra; executes which becomes:

sumExtra = testGrades[0] - 100 + sumExtra

As sumExtra = 0

testGrades[0] = 101

So

sumExtra = 101 - 100 + 0

sumExtra = 1

The same procedure is done at each iteration until the loop breaks. The output is:

sumExtra = 8

4)

The loop works as follows:

At first iteration

i=0

i < NUM_VALS is true as  NUM_VALS = 4 so 0<4 Hence loop body executes.

if (i<(NUM_VALS-1))   checks if i is less than NUM_VALS-1 which is 4-1=3

It is also true as 0<3 Hence the statement in body of i executes

printf( "%d,", hourlyTemp[i]) statement prints the element at i-th index i.e. at 0-th index of hourlyTemp array with a comma (,) in the end. As hourlyTemp[0] = 90; So 90, is printed.

When the above IF condition evaluates to false i.e. when i = 3 then else part executes which prints the hourlyTemp[3] = 95 without comma.

Same procedure happens at each iteration unless value of i exceeds NUM_VAL.

The output is:

90, 92, 94, 95

The programs along with their output are attached.

Answer:

Selection control structure

Explanation:

This is often referred to as if-conditional statement;

This condition tests for a condition and performs a sequence of operation depending on the result of the condition;

Take for instance, the following program written in python

x = int(input("enter any number: "))

if x < 0:

  print("Yes")

else

  print("No")

The above checks if the input number is less than 0,

If the condition is true, it prints Yes

If otherwise, it prints No

Answer:

A true

Explanation:

Speeding leads to an increase in the degree of crash severity, possibly resulting in more fatalities or injuries. More damage is caused to the vehicles involved at higher speeds, increasing likelihood vehicle will not be drivable after a crash.

The statement "Speeding is one of the most prevalent factors contributing to traffic crashes" is true.

Speeding causes crashes to be more severe, which could lead to more fatalities or injuries. Higher speeds result in more damage to the involved vehicles, increasing the risk that the vehicle won't be drivable following a collision. There are many accidents increasing because of high speed.

The term "speeding" refers to moving or traveling swiftly. He paid a penalty for speeding. For many American drivers, speeding has become the standard, whether it is going over the posted speed limit, driving too quickly for the road conditions, or racing. Nationwide, speeding contributes to road fatalities.

Therefore, the statement is true.

To learn more about speeding, refer to the link:

https://brainly.com/question/15297960

#SPJ2

Answer:

The technician should either provide a route from the user's IP scheme to the printer or change the user's IP scheme to be within the same scheme as the printer.

Explanation:

The most likely reason the user is unable to print to the printer is that the user's computer cannot path the current address to the address of the printer.  Without the printer being on the same subnet as the user's computer, the computer has no way of being able to tell where the printer is.

The two solutions to this are to either add a route to the user's computer explicitly telling the user's computer where to trace to find the printer or to change the user's computer to match the IP scheme of the printer.

Cheers.

Answer:

When students have completed the assignment, they simply click the Mark As Done button to let the teacher know they have finished.

Explanation: Note: The teacher does NOT receive an alert or email notification when work has been turned in, or marked as done.

Answer:

Answered below

Explanation:

Hardware resources that can be usefully shared and also examples of their sharing include;

A) CPU servers, which carry out computations for clients.

B) Network capacity transmission of data or packet transmission is done using the same circuit, meaning many communication channels share the same circuit.

C) Screen networks windows systems which enable processes in remote computers to update the contents of their local server.

D) Memory cache server.

E) Disk file server, virtual disk server.

Softwares include;

A) Web-page web servers which allow client programs to have read-only access to page contents.

B) Database whose contents can be usefully shared.

C) File servers enable multiple users access to files .

D) Objects can be shared in distributed systems example shared ticket booking, whiteboard etc.

E) Exclusive lock which enables the coordination of accessing a special resource.

Answer:

Explanation:

Hello friend !!!!!!!!!!!!

The answer is school zone

Hope this helps

plz mark as brainliest!!!!!!!

Children walking on the sidewalk, a person sitting in a parked car, and a parking lot with vehicles entering and exiting indicate a school zone (Option C).

In conclusion, children walking on the sidewalk, a person sitting in a parked car, and a parking lot with vehicles entering and exiting indicate a school zone (Option C).

Learn more in:

https://brainly.com/question/8019372

Answer:

string sep = "";

for (i = 0; i < NUM_VALS; i++) {

 cout << sep << hourlyTemp[i];

 sep = ", ";

}

Explanation:

Insert the snippet at the commented location.

With the absence of a join() method as found in other languages, it is always a hassle to suppress that separator comma from appearing at the beginning or the end of your output. This solution is nice since it doesn't require any magic flags to keep track of wether the first element was printed.

Answer:

Communication

Collaboration

ICT literacy

Explanation:

These are some of the skills that are needed in the 21st century to compete and thrive in the information society.

To remain progressive, one needs to have good communication skills. These communication skills can include Active Listening and Passive Listening.

Collaboration is important because you'll have to work with other people as no man is an island, we need someone else so the skill of collaboration is necessary to compete and stay relevant in the information society in the 21st century.

IT literacy is also very important because one needs to have basic computer knowledge such as programming, computer essentials and applications, etc.

(<ANSWER RETRACTED>)

Answer:

Explanation:

Bit stuffing Framing Method

In the given situation, the beginning casing is shown by 6 sequential ones followed by 2 zeroes.

The beginning casings are generally known as the flags.which are utilized for demonstrating the beginning and end of the edges. Essentially utilized for the synchronization between the sender and the reciever.

Along these lines here the beginning and end banners are 11111100(this is on the grounds that the end banner is same as the beginning banner).

To enable us understand how this question plays out, let us understand the rule for Stuffing and De-stuffing .

The standard for stuffing is :

At whatever point there are 5 successive ones supplement one zero in the casing which is an information. The embedded zero piece is known as the stuffed bit.The principle reason behind stuffing somewhat after 5 back to back ones is to evade the distortion of information (data) as flag. If the reciever misconstrues the information as end banner then he would quit recieving the information where the entire information sent by the sender will be left and lost causing an error-prone information.

The rule for destuffing :

The standard/rule for destuffing is only inverse as stuffing. After recieving the bitstuffed information (data), at the reciever's end zero after each 5 continuous ones will be evacuated and the rest of the information will be considered as the genuine information.

In the given situation, the beginning casing is demonstrated by 6 back to back ones followed by 2 zeroes.

the beginning casings are normally known as the flags.which are utilized for showing the beginning and end of the edges. Essentially utilized for the synchronization between the sender and the receiver.

In this way here the beginning and end banners are 11111100(this is on the grounds that the end banner is same as the beginning banner).

where the bolded/underlined digits represents the stuffed bits

cheers i hope this helps

Answer:

Pick up roller

Explanation:

you should first check the pickup roller component. This component is the part of the printer that picks paper up from the paper tray. The pickup roller links the printer and the paper. When the printer printer is running, the roller would take paper from the paper tray for the printer to print on. One of the issues it can have is Paper jam where the roller would stop turning so that it will no longer be picking papers up from the tray.

Answer:

Primitive operation

Explanation:

Operations that a given computing agent can perform are called primitive operations.

These operations are basic arithmetic work done by an algorithm such as assigning a variable, calling a method, returning an array, etc. They are sometimes written in pseudo-code.

Answer:

2 correct answer out of 3

Answer:

Here is the function same_person that takes two instances of Person as arguments i.e. p1 and p2 and returns True if they are the same Person, False otherwise.

def same_person(p1, p2):  #definition of function same_person that takes two parameters p1 and p2

   if p1.GTID==p2.GTID:  # if the two instances of Person have same GTID

       return True  #returns true if above condition evaluates to true

   else:  #if the two instances of Person do not have same GTID

       return False #returns false when two persons have different GTID

Explanation:

person1 = Person("David Joyner", 30, 901234567)  #first instance of Person

person2 = Person("D. Joyner", 29, 901234567)  #second instance of Person

person3 = Person("David Joyner", 30, 903987654)  #third instance of Person

print(same_person(person1, person2))  #calls same_person method by passing person1 and person2 instance of Person to check if they are same

print(same_person(person1, person3)) #calls same_person method by passing person1 and person3 instance of Person to check if they are same

The function works as follows:

For function call print(same_person(person1, person2))

The GTID of person1 is 901234567 and that of person2 is 901234567

If condition if p1.GTID==p2.GTID in the function same_person checks if the GTID of person1 is equal to the GTID of person2. This condition evaluates to true because GTID of person1 = 901234567 and GTID of person2 = 901234567

So the output is:

True

For function call print(same_person(person1, person3))

The GTID of person1 is 901234567 and that of person3 is 903987654

If condition if p1.GTID==p2.GTID in the function same_person checks if the GTID of person1 is equal to the GTID of person3. This condition evaluates to false because GTID of person1 = 901234567 and GTID of person2 = 903987654 and they are not equal

So the output is:

False

The complete program along with its output is attached in a screenshot.

Answer:

Answered below

Explanation:

Deep packet inspection is a kind of data processing that thoroughly inspects data sent over a computer network and acts on it by rerouting, logging or blocking it. Uses of DPI include;

To ensure that data is in the correct format, internet censorship, to check for malicious code, and also eavesdropping.

DPI uses port mirroring and optical splitter to acquire packets for inspection. It combines the functionality of an intrusion detection system and intrusion prevention system with a traditional stateful firewall.

DPI is therefore helpful in perimeter security by keeping unauthorized users out and at the same time protecting authorized users from attack. Privacy concerns have been raised over the inspection of content layers of internet protocols such as in the case of censorship and government regulations and control.

Answer:

c. Cartography.

Explanation:

Cartography is the science and art of making an illustrated map or chart. Geographic information system (GIS) allows users to interpret, analyze, and visualize data in different ways that reveal patterns and trends in the form of reports, charts, and maps.

Basically, cartography is the science and art of depicting a geographical area graphically, mostly on flat surfaces or media like maps or charts. It is an ancient art that was peculiar to the fishing and hunting geographical regions. Geographic information system is an improved and technological form of cartography used for performing a whole lot of activities or functions on data generated from different locations of the Earth.

Answer:

C. Cartography

Explanation:

Answer:

E-Government Act of 2002.

Explanation:

The E-Government Act of 2002 is a statute of the United States of America which was enacted by the 107th U.S Congress on the 17th of December, 2002. The E-Government Act of 2002 was signed into law to facilitate the management and promotion of the US government processes and services, as well as enhance transparency and accountability between the government and the public through the application of internet-based information technology.

Under the E-Government Act of 2002, federal agencies must;

1. Review their IT systems for privacy risks.

2. Post privacy policies on their websites.

3. Post machine-readable privacy policies on their websites.

4. Report privacy activities.

Answer:

Yes, badlion is safe. The further explanation is given below.

Explanation:

Answer:

Polymorphism

Explanation:

If we use polymorphism so we can apply the names that could be easy to remember for the methods' purpose.

The information regarding the polymorphism is as follows:

Therefore we can conclude that If we use polymorphism so we can apply the names that could be easy to remember for the methods' purpose.

Learn more about the behavior here: brainly.com/question/9152289

Answer:

The answer is "check the worksheet is not read only"

Explanation:

The read only mode is used for read the file data, and it doesn't allows the user to update the file, and for updating the worksheet we should check iut does not open in the read-only mode.

If it is open, then we close it and for close we goto the office button and click on the tools option after that goto general setting, in this there is a check box for turn off the read-only mode.

Answer:

Are characterized by radical novelty

Explanation:

Example, intelligent enterprises are reimaging and reinventing the way they do bussines

Answer:

It allows for departmentalization and managerial control. Simple and easy to understand and use. Easy to manage due to the rigidity of the model – each phase has specific deliverables and a review process. Phases are processed and completed one at a time.

Explanation:

Answer:

Option A

Availability

Explanation:

The implementation of too many security protocols will lead to a reduction of the ease at which a piece of information is accessible.  Accessing the piece of information will become hard even for legitimate users.

The security protocols used should not be few, however, they should be just adequate to maintain the necessary level of confidentiality and integrity that the piece of information should have, While ensuring that the legitimate users can still access it without much difficulty.

Answer:

a. There are improvements in security and high availability during outage

Explanation:

Virtualization occurs when data that could be in several formats (for example, storage devices) are made to appear real through a software. There are virtualization providers who act as third-party between users and the original manufacturers of the software. While virtualization has received wide popularity in recent times because of the several advantages it offers of which cost-saving is included, it also has some disadvantages. One of them from the options provided is the possibility of a security breach and its uncertain availability.

The security breach arises because of the proliferation of information on the virtual space. This information can be accessed by unauthorized hackers. Also since third-party providers are the usual providers of virtualization services, the availability depends on them because if they shut down, users can no longer access the software.

Answer:

Processor P2 has the highest performance expressed in instructions per second.

Explanation:

Given:

Processors:

P1

P2

Clock rate of P1 = 3 GHz

Clock rate of P2 = 3 GHz

Cycles per instruction = CPI of P1 = 1.5

Cycles per instruction = CPI of P2 = 1.0

To find:

which processor has the highest performance in instructions per second (IPS)

Solution:

Compute CPU time:

CPU time =  (Number of instructions * cycles per instruction) / clock rate

CPU time = (I * CPI) / R

We are given the CPI and clock rate. So

CPU time = (I * CPI) / R

 I / CPU time = R/CPI

Since

Instructions per second = Number of instructions (I) / execution time

                             IPS     = I / CPU time

So

Instructions Per Second = clock rate / cycles per instruction

IPS = R/CPI

Putting the values in above formula:

Instructions Per Second for P1 = IPS (P1)

                                                  = clock rate P1 / CPI (P1)

                                                  = 3 GHz / 1.5

                                     IPS (P1) = 2            

As 1 GHz = 10⁹ Hz

IPS (P1) = 2x10⁹

Instructions Per Second for P2 = IPS (P2)

                                                  = clock rate P2 / CPI (P2)

                                                  = 3 / 1.0

                                     IPS (P2) = 3

As 1 GHz = 10⁹ Hz

IPS (P2) = 3x10⁹

Hence processor P2 has the highest performance expressed in instructions per second i.e. 3x10⁹

Answer:

B. Full tunnel.

Explanation:

In this scenario, an organization is planning to implement a virtual private network (VPN). They want to ensure that after a VPN client connects to the VPN server, all traffic from the VPN client is encrypted. The best method to meet this goal is to use a full tunnel.

A full tunnel is a type of virtual private network that routes and encrypts all traffics or request on a particular network. It is a bidirectional form of encrypting all traffics in a network.

On the other hand, a split tunnel is a type of virtual private network that only encrypts traffic from the internet to the VPN client.

Hence, the full tunnel method is the most secured type of virtual private network.

Answer:

AZAX is key sentence for without reloading page.

Explanation:

AJAX is also known as XHR. If some one wants to send the file without reloading then look ahead at the search function and prompt the users by auto saving the documents. This request is sent to the server. The server return the data to your network. Whenever you have seen the file form, some action on the page. You will see some request from AJAX server request on your functional area. AJAX is called a reloading file without page. AZAX is stands for Asynchronous java scripts And XML. AJAX is used to send an email. AZAX is not used in front end, it is used from back end process.