a vehicle start moving at 15m/s. How long will it take to stop at a distance of 15m?​

Answer:

The inductance is 17784.96 ohm and rms current is 4.77 mA.

Explanation:

Voltage, V = 120 V

frequency, f = 60 Hz

Inductance, L = 47.2 H

The rms  voltage is

[tex]V_{rms}=\frac{V_o}{\sqrt 2}\\\\V_{rms}=\frac{120}{\sqrt 2}\\\\V_{rms} = 84.87 V[/tex]

The reactance is given by

[tex]X_L = 2\pi f L\\\\X_L = 2\times 3.14\times 60\times 47.2 \\\\X_L = 17784.96 ohm[/tex]

The rms current is

[tex]I_{rms} =\frac{V_{rms}}{X_L}\\\\I_{rms}=\frac{84.87}{17784.96}\\\\I_{rms} = 4.77\times 10^{-3} A = 4.77 mA[/tex]

Answer:

Answer

Correct option is

A

5×10

−6

tesla

I=5A

x=0.2m

Magnetic field at a distance 0.2 m away from the wire.

B=

2πx

μ

0

I

=

2π×0.2

4π×10

−7

×5

=10×5×10

−7

=5×10

−6

tesla

Answer:

3.464 seconds.

Explanation:

We know that we can write the period (the time for a complete swing) of a pendulum as:

[tex]T = 2*\pi*\sqrt{\frac{L}{g} }[/tex]

Where:

[tex]\pi = 3.14[/tex]

L is the length of the pendulum

g is the gravitational acceleration:

g = 9.8m/s^2

We know that the original period is of 2.00 s, then:

T = 2.00s

We can solve that for L, the original length:

[tex]2.00s = 2*3.14*\sqrt{\frac{L}{9.8m/s^2} }\\\\\frac{2s}{2*3.14} = \sqrt{\frac{L}{9.8m/s^2}}\\\\(\frac{2s}{2*3.14})^2*9.8m/s^2 = L = 0.994m[/tex]

So if we triple the length of the pendulum, we will have:

L' = 3*0.994m = 2.982m

The new period will be:

[tex]T = 2*3.14*\sqrt{\frac{2.982m}{9.8 m/s^2} } = 3.464s[/tex]

The new period will be 3.464 seconds.

Answer:

f = 1 m

Explanation:

The magnification of the lens is given by the formula:

[tex]M = \frac{q}{p}[/tex]

where,

M = Magnification = 4

q = image distance = 5 m

p = object distance = ?

Therefore,

[tex]4 = \frac{5\ m}{p}\\\\p = \frac{5\ m}{4}\\\\p = 1.25\ m[/tex]

Now using thin lens formula:

[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}\\\\\frac{1}{f} = \frac{1}{1.25\ m}+\frac{1}{5\ m}\\\\\frac{1}{f} = 1\ m^{-1}\\\\[/tex]

f = 1 m

Answer:

978.6084 Newton

Explanation:

Given the following data;

To find the weight in Newtown;

Conversion:

1 lb = 4.448220 N

220 lb = 220 * 4.448220 = 978.6084 Newton

220 lb = 978.6084 Newton

Therefore, the weight of the astronaut in Newton is 978.6084.

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

Weight = mg

Where;

Note:

Answer:

The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.

Explanation:

Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:

First skater

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)

Second skater

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)

Where:

[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.

[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.

[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.

[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.

[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.

[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.

If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:

By (1):

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]

[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]

[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]

[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]

[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]

By (2):

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]

[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]

[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]

[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]

Answer: The correct statement is:

--> The voltage across each resistor is the same.

Explanation:

RESISTORS are defined as the components of an electric circuit which are capable of creating resistance to the file of electric current in the circuit. They work by converting electrical energy into heat, which is dissipated into the air. These resistors can be divided into two according to their arrangements in the electric cell. It include:

--> Resistors in parallel and

--> Resistors in series

RESISTORS are said to be in parallel when two or more resistance or conductors are connected to common terminals so that the potential difference ( voltage) across each conductor IS THE SAME but with different current flow through each of them. Also, Individual resistances diminish to equal a smaller total resistance rather than add to make the total.

Answer:

0.5 V

Explanation:

The electric potential distance between different locations in an electric field area is unaffected by the charge that is transferred between them. It is solely dependent on the distance. Thus, for two electrons pushed together at the same distance into the same field, the electric potential will remain at 1 V. However, the electric potential of one of the two electrons will be half the value of the electric potential for the two electrons.

Answer:

1.67 m

Explanation:

The potential energy change of the small ball ΔU equals the work done by the buoyant force, W

ΔU = -W

Now ΔU = mgΔh where m = mass of small ball = ρV where ρ = density of small ball and V = volume of small ball. Δh = h - h' where h = final depth of small ball and h' = initial height of small ball = 5 m. Δh = h - 5

ΔU = mgΔh

ΔU = ρVgΔh

Now, W = ρ'VgΔh'   where ρ = density of water and V = volume of water displaced = volume of small ball. Δh' = h - h' where h = final depth of small ball and h' = initial depth of small ball at water surface = 0 m. Δh' = h - h' = h - 0 = h

So, ΔU = -W

ρVgΔh = -ρ'VgΔh'

ρVg(h - 5) = -ρ'Vgh

ρ(h - 5) = -ρ'h

Since the density of the small ball equals 1/2 the density of water,

ρ = ρ'/2

ρ(h - 5) = -ρ'h

(ρ'/2)(h - 5) = -ρ'h

ρ'(h - 5)/2 = -ρ'h

(h - 5)/2 = -h

h - 5 = -2h

h + 2h = 5

3h = 5

h = 5/3

h = 1.67 m

So, the maximum depth the ball reaches is 1.67 m.

Answer:

The highest point in the trajectory occurs at the midpoint of the path. This highest point increases as the angle increases. At a 75° launch angle, the maximum height is approximately 76 meters. However, a further increase in launch angle beyond this 75° angle will increase the peak height even more.

Answer:

Electromechanical transducer and Electrical receiver.

Explanation:

Electromechanical transducer is the part of a communication system which converted electrical waves or electrical energy into sound waves. The most common example loudspeaker while on the other hand, Electrical receiver is a device that converts electrical energy into another form of energy, except thermal. Examples are cell phones, computers and television.

Answer:

7.46×10⁻⁶ m

Explanation:

Applying,

F = kqq'/r²............ Equation 1

make r the subject of the equation

r = √(F/kqq').......... Equation 2

From the question,

Given: F = 8 N, q' = q= 4 C

Constant: k = 8.98×10⁹ Nm²/C²

Substitute these values into equation 2

r = √[8/(4×4×8.98×10⁹)]

r = √(55.7×10⁻¹²)

r = 7.46×10⁻⁶ m

Answer:

 T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Explanation:

Let's use Newton's second law

          F = ma

force is the universal force of attraction and acceleration is centripetal

          G m M / r² = m v² / r

          G M / r = v²

as the orbit is circular, the speed of the satellite is constant, so we can use the kinematic relations of uniform motion

          v = d / T

the length of a circle is

          d = 2π r

we substitute

        G M / r = 4π² r² / T²

        T² = [tex]\frac{4\pi ^2 }{GM} \ r^3[/tex]

the distance r is measured from the center of the Earth (Re), therefore

        r = Re + h

where h is the height from the planet's surface

let's calculate

         T² = [tex]\frac{4\pi ^2}{ 6.67 \ 10^{-11} \ 1.991 \ 10^{30}}[/tex]   (Re + h) ³

         T = [tex]\sqrt{29.72779 \ 10^{-20}} \ \sqrt[2]{R_e+h)^3}[/tex]

         T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Answer:

false.

Explanation:

We know that for a wave that moves with velocity V, with a wavelength λ, and a frequency f, we have the relation:

V = λ*f

So, if the velocity is constant and we increase the frequency to:

f' > f

we will have a new wavelength λ'

Such that:

V = f'*λ'

And V = f*λ

Then we have:

f'*λ' = f*λ

Solvinf for λ', we get:

λ' =(f/f')*λ

And because:

f' > f

then:

(f/f') < 1

Then:

λ' =(f/f')*λ < λ

So, if we increase the frequency, we need to decrease the wavelength.

So, for higher frequency waves, we must have proportionally shorter wavelengths.

Then we can conclude that the given statement:

"or waves moving through the atmosphere at a constant velocity, higher frequency waves must have proportionally longer wavelengths"

is false.

Answer:

increased because as you run into each sound wave the time between each sound decreases meaning the period of each wave decreases to your years and since f=1/T and T is decreasing by greater than 0, f must increase.

Explanation:

Answer:

False

Explanation:

You have a circle so think back to circular motion. Theres 2 directions, centripetal and tangential. The problem tells you there's a constant tangential speed so tangential acceleration is 0. However there is a centripetal acceleration acting on the ball that holds it in its circular motion (i.e. tension, or gravity). Since centripetal is perpendicular to the tangential direction, acceleration and velocity are in different directions.

Answer:

A (3 seconds)

Explanation:

Well here we have a type of motion called projectile motion and it is pretty similar to an upside down parabola. The top of the trajectory is the vertex of the parabola and is also when v=0.

Lets identify our givens.

Givens:

Horizontal speed= 30m/s

Vertical Speed= 30 m/s

Since the ball is in freefall after being launched ay=-g(take up to be positive) and ax=0

The ball is launched from the ground so y0=0

Final vertical velocity= 0

This problem is now relatively easy because we only need to find the vertical distance so we can ignore horizontal speed and use

vy=vy0+ayt

Plug in our givens

0=30-10t

solve for t

t=3 seconds

Answer:

The two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Explanation:

Given that,

The mas of skater 1, m₁ = 80 kg

The speed of skater 1, u₁ = 5 m/s (right)

The mass of skater 2, m₂ = 70 kg

The speed of skater 2, u₂ = -2 m/s (left)

Let v is the magnitude of the two skaters just after they collide. They must have a common speed. So, using the conservation of momentum as follows :

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\\v=\dfrac{m_1u_1+m_2u_2}{(m_1+m_2)}[/tex]

Put all the values,

[tex]v=\dfrac{80(5)+70(-2)}{(80+70)}\\\\=1.73m /s[/tex]

So, the two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Answer: The statement that is not an example of convection is (A person gets a suntan on a beach).

Explanation:

There are different modes of heat energy transfer which includes:

--> conduction

--> Radiation and

--> Convection

CONVECTION is a process by which heat energy is transferred in a fluid or air by the actual movement of the heated molecules. The cooler portion of the air surrounding a warmer part exerts a buoyant force on it. As the warmer part of the air moves, it is replaced by cooler air that is subsequently warmed.

Convection in gases is very common and gas expands more than liquid when subjected to high temperature.

--> it is used in bringing about the circulation of fresh air in the room in a process known as ventilation.Here, cool air is constantly being replaced with denser air ( warm air).

-->An electric heater warms a room and Smoke rises above a fire are typical example of convection in gases.

-->Spaghetti is cooked in water: As the water close to the burner warms, it rises to the top and boils. At the same time, cooler water on top moves downward to replace the rising hot water.

--> also the eagle uses convection current to stay afloat in the sky without flapping its wings to conserve energy.

But the option (A person gets a suntan on a beach) is an example of heat transfer through radiation. This is because the sun emits it's rays from the sky down to earth without any material medium unlike others. Therefore, this option is the ODD one out.

Answer:

how to solve this problem ???????

The magnitude of the resultant force is 919.6 N and the value of angle θ is 36.87⁰.

The resultant of the two forces is determined by resolving the force into x and y component as shown below;

[tex]F_1_x + F_2x_x = F_R_x \ --- (1) \\\\F_1_y + F_2_y = F_R_y\ ---(2)[/tex]

where;

The value of Angle θ is determined from equation (1)

-500sinθ + 600sin(30) = 0

500sinθ = 600sin(30)

500sinθ = 300

sinθ = 3/5

θ = 36.87⁰

The resultant of the forces is determined using the second equation;

500cosθ + 600cos(30) = R

500 x cos(36.87) + 600 x cos(30) = R

919.6 N = R

Learn more about resultant forces here: https://brainly.com/question/25239010

Answer:

The impact force is 98000 N.

Explanation:

mass = 10 tons

The impact force is the weight of the object.

Weight =mass x gravity

W = 10 x 1000 x 9.8

W = 98000 N

The impact force is 98000 N.

Answer:

 μ = 0.15

Explanation:

Let's start by using Hooke's law to find the force applied to the block

          F = k x

          F = 87.0 0.065

          F = 5.655 N

Now we use the translational equilibrium relation since the block has no acceleration

          ∑ F = 0

          F -fr = 0

          F = fr

the expression for the friction force is

          fr = μ N

if we write Newton's second law for the y-axis

          N -W = 0

          N = W = mg

we substitute

          F = μ mg

          μ = F / mg

          μ = [tex]\frac{5.655}{3.8 \ 9.8}[/tex]

          μ = 0.15

Answer:

because minerals can be gotten from the bottom

Explanation:

it's self explanatory

Answer:

True. A permanent magnet like the earth produces its own B field due to movement of the iron core. The earths magnetic field is the reason why we have an atmosphere and it also is the only defense against solar flares. A coil of wire or solenoid that has current have so much moving charge that the motion of the electrical charge can create a significant G b-field

Answer:

D) the two spheres remain of equal size.

Explanation:

Answer:

Option B.

Explanation:

Remember that we can think on any movement as a sum of a movement in the y-axis, the movement in the x-axis, and the movement in the z-axis. And these are not related, this means that, for example, the movement in x does not affect the movement in y.

So, when we analyze the problem of "how long takes an object to hit the ground"

We do not care for the horizontal motion of the object, we only care for the vertical motion of the object.

So, if an object is dropped, and another has a given initial velocity in the x-axis, in both cases the initial velocity in the y-axis will zero.

And in both cases, the only vertical force acting on the balls will be the gravitational force (so both objects will have the same vertical acceleration and the same vertical initial velocity) with this, we already know that the vertical motion of both objects will be exactly the same.

So, both objects will hit the ground at the same time.

(notice that here we are ignoring things like air resistance and other complex forces)

So here the correct option is b:  Neither. Their vertical motion is the same, so they will reach the ground at the same time.

Answer:

Explanation:

A coin and feather dropped in a moon experience the same acceleration due to gravity as small as 1.625 m/s², and because of the absence of air resistance both will fall at the same rate to the ground.

If the same coin and feather are dropped in the earth, they will experience the same acceleration due to gravity of 9.81 m/s² and because of the presence of air resistance, the heavier object (coin) will be pulled faster to the ground by gravity than the lighter object (feather).

Answer:

The magnitude of the electric field is same while the direction at the left and at the right is opposite to each other.

Explanation:

The direction of the electric field due to the dipole on the axial line is same as  the direction of dipole moment.

The magnitude of the electric field due to an electric dipole on its axial line is

[tex]E=\frac{2kp}{r^3}[/tex]

where, k is the constant, p is the electric dipole moment and r is the distance from the center of dipole.

The magnitude of the electric field is same while the direction at the left and at the right is opposite to each other.  

Answer:

Smaller and upside down

Explanation:

To answer the question, we must recognise that the characteristics of the image formed by a convex lens depends on the position of the object from the lens.

From the diagram given in the question above, the following data were obtained:

1. The image is smaller than the object.

2. The image is inverted i.e upside down.

3. The image is closer to the lens

4. The image between 2f and f

Now, considering the options given in question above, the correct answer to the question is:

The image is smaller and upside down.

Answer:

c. 250k

Explanation:

The temperature of the sink is approximately 250 K.

To find the temperature of the sink, we can use the formula for the efficiency of a heat engine:

Efficiency = 1 - (Temperature of Sink / Temperature of Source)

Given that the temperature of the source (T_source) is 500 K and the source energy (Q_source) is 2003 J, and the sink energy (Q_sink) is 100 J, we can rearrange the formula to solve for the temperature of the sink (T_sink):

Efficiency = (Q_source - Q_sink) / Q_source

Efficiency = (2003 J - 100 J) / 2003 J

Efficiency = 1903 J / 2003 J

Efficiency = 0.9497

Now, plug the efficiency back into the first equation to solve for T_sink:

0.9497 = 1 - (T_sink / 500 K)

T_sink / 500 K = 1 - 0.9497

T_sink / 500 K = 0.0503

Now, isolate T_sink:

T_sink = 0.0503 * 500 K

T_sink = 25.15 K

Since the temperature should be in Kelvin, we round down to the nearest whole number, which is 25 K. Thus, the temperature of the sink is approximately 250 K.

To learn more about sink energy, here

https://brainly.com/question/10483137

#SPJ2