a washing machine uses 750 watts of power and costs $0.15 per kilowatt-hour. How much does it cost to run a washing machine for two hours? Round your answer to the nearest cent.

Answers

Answer 1

Answer:$0.1125

Explanation:

power=750 watts

Power=750/1000=0.75 kilowatts

$0.15 for 1 kilowatts-hour

$h for 0.75 kilowatts-hour

$h=(0.75 x 0.15)

$h=$0.1125

Answer 2

Answer: 0.23

Explanation:

this is the correct answer on edg


Related Questions

3. The current in a flashlight powered by 4.5 Volts is 0.5 A. What is the power delivered to the flashlight?
4.If the flashlight in the previous problem is left on for 3 minutes, how much electric energy is delivered to the bulb?

Answers

Answer:

Question 3: 2.25 watts

Question 4: 405 joules

Explanation:

question 3:

Current =0.5 amps

Voltage =4.5 volts

Power= current x voltage

Power=0.5 x 4.5

power=2.25 watts

Question 4

Current =0.5 amps

Voltage =4.5v

Time=3 minutes

Time =3x60

Time =180 seconds

Energy=current x voltage x time

Energy =0.5 x 4.5 x 180

Energy =405 joules

The greater the distance between two objects in space, the _______ their gravitational

Answers

Answer is Weaker. If it is talking about the objects' gravitational forces.

How does a concave mirror form an image

Answers

Answer:

a magnified and erect virtual is found to be formed.

Archerfish are tropical fish that hunt by shooting drops of water from their mouths at insects above the water’s surface to knock them into the water, where the fish can eat them. A 65-g fish at rest just at the surface of the water can expel a 0.30-g drop of water in a short burst of 5.0 ms. High-speed measurements show that the water has a speed of 2.5 m/s just after the archerfish expels it. What is the speed of the archerfish immediately after it expels the drop of water?
(a) 0.0025 m/s
(b) 0.012 m/s
(c) 0.75 m/s
(d) 2.5 m/s.

Answers

Answer:

(b) 0.012 m/s

Explanation:

Given that:

mass (m₁) of the drop of water = 0.30 g = 3.0 × 10⁻⁴ kg

mass (M₂) of the fish = 65 g =  65 × 10⁻³ kg

speed (v₁) of the water = 2.5 m/s

speed (v₂) of the archerfish = ??

By conservation of momentum

m₁v₁ - M₂v₂ = 0

m₁v₁  = M₂v₂

v₂ = m₁v₁ / M₂

v₂ =  ( 3.0 × 10⁻⁴ × 2.5 ) /  65 × 10⁻³

v₂ = 0.0115 m/s

v₂ ≅ 0.012 m/s

Therefore, the speed of the archerfish immediately after it expels the drop of water 0.012 m/s.

A plane electromagnetic wave varies sinusoidally at 90.0 MHz as it travels along the x direction. The peak value of the electric field is 200 V/m, and it is directed along the y direction. Find the wavelength, the period and the maximum value of the magnetic field. Write expressions in SI units for the space and time variations of the electric field and of the magnetic field. Include numerical values, and include subscripts to indicate coordinate directions. Find the average power per unit area that this wave propagates through space.

Answers

Answer:

Explanation:

frequency n = 90 x 10⁶ Hz .

time period T = 1 / n

= 1 / 90 x 10⁶

= 1.11 x 10⁻⁸ S.

wavelength = velocity of light / frequency

= 3 x 10⁸ / 90 x 10⁶

= 3.33 m

maximum value of the magnetic field. ( B₀ )

E₀ / B₀ = c where E₀ and  B₀ are maximum electric and magnetic field .

E₀ / c=  B₀

200/ 3 x 10⁸

= 66.67 x 10⁻⁸ T .

expressions in SI units for the space and time variations of the electric field

[tex]E=E_{0y}sin(2\pi nt - \frac{2\pi x}{\lambda} )[/tex]

[tex]E=200sin(180\times 10^6\pi t - \frac{2\pi x}{\lambda} )[/tex] N/C

[tex]B=B_{0z}sin(2\pi nt - \frac{2\pi x}{\lambda} )[/tex]

[tex]B=66.67\times 10^{-8}sin(180\times 10^6\pi t - \frac{2\pi x}{\lambda} )[/tex] T

A light bulb dissipates 100 Watts of power when it is supplied a voltage of 220 volts.
a) What is the current flowing through this light bulb?
b) What is the resistance of the light bulb?

Answers

Given Information:

Power = P = 100 Watts

Voltage = V = 220 Volts

Required Information:

a) Current = I = ?

b) Resistance = R = ?

Answer:

a) Current = I = 0.4545 A

b) Resistance = R = 484 Ω

Explanation:

According to the Ohm’s law, the power dissipated in the light bulb is given by

[tex]P = VI[/tex]

Where V is the voltage across the light bulb, I is the current flowing through the light bulb and P is the power dissipated in the light bulb.

Re-arranging the above equation for current I yields,

[tex]I = \frac{P}{V} \\\\I = \frac{100}{220} \\\\I = 0.4545 \: A \\\\[/tex]

Therefore, 0.4545 A current is flowing through the light bulb.

According to the Ohm’s law, the voltage across the light bulb is given by

[tex]V = IR[/tex]

Where V is the voltage across the light bulb, I is the current flowing through the light bulb and R is the resistance of the light bulb.

Re-arranging the above equation for resistance R yields,

[tex]R = \frac{V}{I} \\\\R = \frac{220}{0.4545} \\\\R = 484 \: \Omega[/tex]

Therefore, the resistance of the bulb is 484 Ω

Answer:

bulb will burn out!

Explanation:


1. A block of metal of mass 2kg is resting on
a frictionless floor. It is struck by a jet
releasing water at the rate of 1kg/sec at a
speed of 5ms-1. What will be the initial
acceleration of the block?​

Answers

Answer:

The acceleration is  [tex]a = 2.5 \ m/s^2[/tex]

Explanation:

From the question we are told that

   The mass of the metal block is [tex]m_b = 2 \ kg[/tex]

    The mass flow rate of the water is  [tex]\r m = 1\ kg/s[/tex]

    The speed of the water of the water release is [tex]v_w = 5 m/s[/tex]

Generally according to the law of conservation of linear momentum

    [tex]p_i = p_f[/tex]

Now  [tex]p_i[/tex] is the initial momentum of the system which mathematically represented as

       [tex]p_i = m_w * v_w + m_b * v_b[/tex]

Now [tex]m_w[/tex] is the mass of water at the point of contact with the block which can be deduced as [tex]m_w = 1 \ kg[/tex]

Now since at initial the block is at rest

       [tex]v_b = 0 \ m/s[/tex]

So

      [tex]p_i = 1 * 5[/tex]

     [tex]p_i = 5 \ kgm/ s[/tex]

And  [tex]p_f[/tex] is the final  momentum of the system which mathematically represented as

     [tex]p_f = m_w * v__{fw} } + m_b * v__{fb}}[/tex]

So   [tex]v__{fw} }[/tex] is the final velocity of water which is zero due to the fact that when the water hits the block it losses its momentum and eventually the velocity becomes zero

    So

          [tex]5 = 2 * v__{fb }[/tex]

Thus  [tex]v__{fb }} = \frac{5}{2}[/tex]

        [tex]v__{fb }} = 2.5 \ m/s[/tex]

Thus  

       [tex]p_f = 2.5 * 2[/tex]

      [tex]p_f = 5 \ kgm /s[/tex]

Now the average momentum change is  

        [tex]p_a = \frac{p_i +p_f}{2}[/tex]

       [tex]p_a = \frac{5+5}{2}[/tex]

        [tex]p_a =5 kgm/s[/tex]

Now the force acting on the block is  

      [tex]F = \frac{p_a }{t}[/tex]

and from the question the initial movement of the block took 1s as it is a mass of water moving at a rate of 1kg/s that caused the first movement of the block

  So

        [tex]F= \frac{5}{1}[/tex]

       [tex]F= 5 \ N[/tex]

Now the acceleration is  

       [tex]a = \frac{F}{m_b}[/tex]

=>     [tex]a = \frac{5}{2}[/tex]

        [tex]a = 2.5 \ m/s^2[/tex]



What is the resistance of a resistor attached to a 1.5 V battery if the current in the circuit is 0.15 A?​

Answers

Answer:10 ohms

Explanation:

Current=0.15A

Voltage=1.5v

Resistance=voltage ➗ current

Resistance=1.5 ➗ 0.15

Resistance=10 ohms

Time Warner Cable's leadership development program that spanned over 30 days and included weekly videos, practice exercises, and a two hour webinar was discussed in the Sed as an example of which of the following?
a) tracking training through a leaming records store LRS)
b) using big data to analyze training compliance
c) using gamification to enhance learning
d) an application of advances in neuroscience to training

Answers

Answer: A.

tracking training through a leaming records store LRS.

Explanation:

An LRS uses xAPI to collect learner data, or experiences, from both online and offline sources. These experiences are reported back to the LRS in the form of xAPI statements, where they are stored. These statements can then be retrieved for reporting and interpretation of the learner data.

Block A, with a mass of 4 kg, is moving with a speed of 2 m/s while Block B, with a mass of 8.4 kg, is moving in the opposite direction with a speed of 6.1 m/s. The center of mass of the two block system is moving with a velocity of ____ m/s. Round your answer to the nearest tenth. Assume Block A is moving in the positive direction.

Answers

Answer:

The center of mass move with the velocity of -3.487 m/s.

Explanation:

Given values of block A.

Mass of block A, (M1) = 4 kg

Speed of block A, (V1) = 2 m/s

Given values of block B.

 Mass of block B, (M2) = 8.4 kg

Speed of block B, (V2) = -6.1 m/s

Below is the formula to find the velocity of center of mass.

[tex]Velocity = \frac{M1V1 + M2V2}{M1 + M2} \\[/tex]

[tex]= \frac{4 \times 2 + 8.4 \times (-6.1) }{4 + 8.4} \\[/tex]

[tex]= \frac{- 43.24}{12.4}\\[/tex]

[tex]= - 3.487 m/s[/tex]

A pendulum is swinging back and forth with no non-conservative forces acting on it. At the highest points of its trajectory, the kinetic energy of the pendulum bob is instantaneously equal to zero joules. At the lowest point of its trajectory, the potential energy is instantaneously equal to zero joules. Which one of the following expressions describes the kinetic and potential energies at the point mid-way between to the highest and lowest points?

A. K = 0, U = Umax
B. K = U
C. K < U
D. K > U
E. U = 0, K = Kmax

Answers

Answer:

K = U ( b )

Explanation:

The expression that describes the kinetic and potential energies at the point mid-way between to the highest and lowest points is  K = U

this is because at the midpoint between the highest point and the lowest point the height is expressed as( h/2) therefore potential energy at that point is expressed as m*g*h/2 therefore the remaining energy at this point will be considered the kinetic energy which will be = m*g*h/2 as well hence at midpoint Kinetic energy = potential energy

What must x be so that the handle end of the bat remains at rest as the bat begins to move? (Hint: Consider the motion of the center of mass and the rotation about the center of mass. Find x so that these two motions combine to give v=0 for the end of the bat just after the collision. Also, note that integration of equation ∑τ⃗ =dL⃗ dt gives ΔL=∫t1t2(∑τ)dt. )

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

Explanation:

From the question we are told that

     The mass of the bat is [tex]m_b = 0.800 \ kg[/tex]

      The bat length is  [tex]L_b = 0.900 \ m[/tex]

      The distance of the bat's center of mass to the handle end is  [tex]z_c = 0.600 \ m[/tex]

      The moment of inertia of the bat is    [tex]I = 0.0530 \ kg \cdot m^2[/tex]

The objective of the solution is to find  x   which is the distance from the handle of the bat to the point where the baseball hit the bat

Generally the velocity change at the end of the bat is mathematically represented as

         [tex]\Delta v_e = \Delta v_c - \Delta w* z_c[/tex]

         Where  [tex]\Delta v_c[/tex] is the velocity change at the center of the bat  which is mathematically represented as

                [tex]\Delta v_c = \frac{Impulse}{m_b }[/tex]

We are told that the impulse is  J so

              [tex]\Delta v_c = \frac{J}{m_b }[/tex]

And   [tex]\Delta w[/tex] is the change in angular velocity which is mathematically represented as

         [tex]\Delta w = \frac{J (z -z_c)}{I}[/tex]

Now we have that

           [tex]\Delta v_e = \frac{J}{m_b } - [\frac{J (x- z_c)}{I} ] * z_c[/tex]

Before a swing when the bat is at rest the velocity change a the end of the bat handle is zero  and the impulse will be  1

   So  

            [tex]0 = \frac{1}{m_b } - [\frac{J (x- z_c)}{I} ] * z_c[/tex]

=>           [tex]x = \frac{I}{m_b z_c} + m_b[/tex]

substituting values

            [tex]x = \frac{0.530}{0.800 * 0.600} + 0.600[/tex]

           [tex]x = 0.710 \ m[/tex]

                     

If you apply a force of 130 N to the lever, how much force is applied to lift the
crate?

Answers

Answer:171 N

Explanation:

Answer:

171 N.

Explanation:

g What is a dielectric material? What is a dielectric material? A dielectric material is a material whose relative dielectric constant is not equal 1 A dielectric material is a material which conducts an electric current, assuming normal operating voltages A dielectric material is a material which does not interact with electric field in any way, assuming normal operating voltages A dielectric material is a material through which virtually no current flows, assuming normal operating voltages SubmitRequest Answer Part B Which materials below are dielectric materials

Answers

Answer:A dielectric material is a material through which virtually no current flows, assuming normally operating voltage

Explanation:

Dielectric materials are ,which means that no current will flow through them, when a voltage is applied

Which term BEST describes the movement of air from the ocean toward the land in the daytime? (AKS 4b DOK 1) *
1 point
Sea breeze
Land Breeze
Valley Breeze
Current Breeze

Answers

Answer:

Option A, Sea Breeze

Explanation:

Ssea breeze is a wind that blows from the ocean or any water body to the nearby land mass. This breeze is cold as compared to the air on land. The water in water bodies has high specific heat capacity and hence takes longer time to cool as compared to the surrounding objects. The warmer air over the land rises upward thereby reducing the pressure on land and hence the sea breeze starts flowing from region of high pressure (i.e above the water body) towards the low pressure region that is the land.

Hence, option A is correct

A 0.009 kg bullet fired through a door enters at 803 m/s and leaves at 617 m/s. If the door material is known to exert an average resistive force of 5620 N on bullets of this type at usual speeds, find the thickness of the door.

Answers

Answer:

The thickness of the door is 0.4230 m

Explanation:

Given;

mass of bullet, m = 0.009 kg

initial velocity of the bullet, u = 803 m/s

final velocity of the bullet, v = 617 m/s

average resistive force of the door on the bullet, F = 5620 N

Apply Newton's second law of motion;

Force exerted by the door on the bullet = Force of the moving bullet

F = ma

where;

F is applied force

m is mass

a is acceleration

Also, Force exerted by the door on the bullet = Force of the moving bullet

[tex]F =ma, \ But \ a =\frac{dv}{dt} = \frac{u-v}{t} \\\\F = \frac{m(u-v)}{t}[/tex]

where;

v is the final velocity of the bullet

u is initial velocity of the bullet

t is time

We need to calculate the time spent by the bullet before it passes through the door.

[tex]t = \frac{m(u-v)}{F} \\\\t = \frac{0.009(803-617)}{5620} = 0.0002979 \ s[/tex]

Distance traveled by the bullet within this time period = thickness of the door

This distance is equivalent to the product of average velocity and time

[tex]S = (\frac{u+v}{2}) t[/tex]

where;

s is the distance traveled

[tex]S = (\frac{u+v}{2}) t\\\\S = (\frac{803+617}{2}) 0.0002979\\\\S = 0.4230 \ m[/tex]

Therefore, the thickness of the door is 0.4230 m

Fluorine-18 undergoes beta-plus decay. The child isotope has an atomic mass of

Answers

Answer:

18

Explanation:

got it right on edge

what do hydroelectric plants use to generate electrical energy?

Answers

Answer:

A.  falling water

Explanation:

I got it right on Edgenuity. Good luck on your quiz.

In hydroelectric plants, water falls on turbine and makes it rotate. In generator, this mechanical energy transforms into electrical energy.

What is hydroelectric power?

Hydroelectric power is generated by turbines that turn the potential energy of falling or swiftly flowing water into mechanical energy, which is then used to power generators. The most popular renewable energy source in the early 21st century was hydroelectricity, which in 2019 accounted for more than 18% of the world's total power producing capacity.

Water is gathered or stored at a higher elevation during the production of hydroelectric power and then transported through substantial pipes or tunnels (penstocks) to a lower elevation; the difference between these two elevations is referred to as the head. The falling water turns turbines as it nears the bottom of the pipelines. In turn, the turbines power generators, which transfer the mechanical energy of the turbines into electricity.

Learn more about  hydroelectric power here:

https://brainly.com/question/15228003

#SPJ2

A 25 kg rock resting on the bottom of a lake must be moved from the paths of boats. The rock has a density of 2350 kg/m^3. What force is needed to lift the rock while under water?

Answers

Answer:

The force needed is the weight of the rock minus the buoyant force.

Explanation:

What are some of the benefits of learned optimism that have been found in
research?
O
A. Fewer health problems
O
O
B. All of these
C. Making more money
O
D. A lower divorce rate

Answers

Answer: fewer health problems

Explanation:

The benefits of learned optimism that have been found in research are Fewer health problems, Making more money, and a lower divorce rate. The correct option is B.

Learned optimism has been associated with numerous benefits in research, including fewer health problems, making more money, and a lower divorce rate. Optimistic people tend to have better physical and mental health, which leads to fewer health problems. Additionally, optimistic people tend to be more successful in their careers and finances, which can lead to higher income and better financial stability. Finally, optimistic people tend to have better relationships, including lower divorce rates, as they are better able to handle conflicts and maintain positive attitudes toward their partners.

In summary, learned optimism has a range of benefits for individuals, including better physical and mental health, greater success in work and education, better relationships with others, and improved resilience. These benefits make learned optimism an important skill for individuals to develop in order to lead happier, healthier, and more successful lives.

To learn about  pessimism  click:

https://brainly.com/question/30880008

#SPJ7

If Jim could drive a Jetson's flying car at a constant speed of 440 km/hr across oceans and space, approximately how long (in millions of years, in 106 years) would he take to drive to a nearby star that is 12.0 light-years away? Use 9.461 × 1012 km/light-year and 8766 hours per year (365.25 days).

Answers

Answer:

t = 2.94 x 10⁶ years

Explanation:

The equation used in the case of constant speed is:

s = vt

t = s/v

where,

s = distance = 12 light years

s = (12 light years)(9.461 x 10¹² km/light year) =  113.532 x 10¹² km

v = speed = 440 km/hr

t = time passed = ?

Therefore,

t = (113.532 x 10¹² km)/(440 km/hr)

t = 2.58 x 10¹¹ hr

Now, converting it to years:

t = (2.58 x 10¹¹ hr)(1 year/8766 hr)

t = 2.94 x 10⁶ years

Two atomic particles approach each other in a head-on collision. Each particle has a mass of 2.97 × 10-25 kg. The speed of each particle is 2.19 × 108 m/s when measured by an observer standing in the laboratory. (a) What is the speed of one particle as seen by the other particle? (b) Determine the relativistic momentum of one particle, as it would be observed by the other.

Answers

Answer:

a) [tex]\vec{v}_{12}=2.86*10^{8} m/s[/tex]

b) [tex]p=2.81*10^{-16} kg*m/s[/tex]    

Explanation:

a) When we have two particles traveling in parallel directions, the formula for relative velocity is:

[tex]\vec{v}_{12}=\frac{\vec{v}_{1}-\vec{v}_{2}}{1-\frac{\vec{v}_{1}\vec{v}_{2}}{c^{2}}}[/tex]

Here we have that v(1) = -v(2), the speed of the of the second particle is the negative of the first one.

If we use these equivalence we have:

[tex]\vec{v}_{12}=\frac{2\vec{v}_{1}}{1+\frac{\vec{v}_{1}^{2}}{c^{2}}}[/tex]  

[tex]\vec{v}_{12}=\frac{2*2.19*10^{8}}{1+\frac{2.19*10^{16}}{3*10^{16}}}[/tex]  

[tex]\vec{v}_{12}=2.86*10^{8} m/s[/tex]          

And, [tex]\vec{v}_{21}=-2.86*10^{8} m/s[/tex]  

b) The relativistic momentum equation to one particle observed by the other particle, is:

[tex]p=\gamma mv[/tex]

Where gamma is:

[tex]\gamma = \frac{1}{\sqrt{1-\frac{v^{2}}{c^{2}}}}[/tex]

v is the speed of the first particle relative to the second particle ([tex]2.86*10^{8}[/tex])m is the mass of the particle [tex]2.97*10^{-25} kg[/tex]

Then gamma will be:

[tex]\gamma=\frac{1}{\sqrt{1-\frac{(2.86*10^{8})^{2}}{(3*10^{8})^{2}}}}[/tex]

[tex]\gamma=3.31[/tex]

Finally, the value of the momentum will be:

[tex]p=3.31*2.97*10^{-25}*2.86*10^{8}[/tex]    

[tex]p=2.81*10^{-16} kg*m/s[/tex]    

I hope it helps you!                        

How much water is on the earth

Answers

71% of the earth is water

Answer:

hope this helps

Explanation:

71% of earth is water

An astronaut visiting Jupiter's satellite Europa leaves a canister of 1.20 mol of nitrogen gas (28.0 g/mol) at 50.0 ∘C on the satellite's surface. Europa has no significant atmosphere, and the acceleration due to gravity at its surface is 1.30 m/s2. The canister springs a leak, allowing molecules to escape from a small hole. Neglect the interaction with surrounding atmosphere. (a) What is the maximum height (in km) above Europa's surface that is reached by a nitrogen molecule whose speed equals the rms speed? Assume that the molecule is shot straight up out of the hole in the canister, and ignore the variation in g with altitude. (b) The escape speed from Europa is 2025 m/s. Can any of the nitrogen molecules escape from Europa and into space?

Answers

Answer:

the answer is a

Explanation:

Calculate potential energy of a 5 kg object sitting on 3 meter ledge

Answers

Pe=5*9.8*3=147 joules

Answer:147 joules

Explanation:

Mass=m=5kg

Acceleration due to gravity=g=9.8m/s^2

Height=h=3 meter

Potential energy=m x g x h

Potential energy=5 x 9.8 x 3

Potential energy=147 joules

PIUDICITIS CONSECulvely and Circle your aliswers. Lilyo
proper significant digits.
53. When you turn on your CD player, the turntable accelerates from zero to 41.8 rad/s in
3.0 s. What is the angular acceleration?
or​

Answers

Answer:

The angular acceleration of CD player is [tex]13.93\ rad/s^2[/tex].

Explanation:

Initial angular speed of a CD player is 0 and final angular speed is 41.8 rad/s. Time to change the angular speed is 3 s.

It is required to find the angular acceleration. The change in angular speed of the CD player divided by time taken is called its angular acceleration. It can be given by :

[tex]a=\dfrac{\omega_f-\omega_i}{t}\\\\a=\dfrac{41.8-0}{3}\\\\a=13.94\ rad/s^2[/tex]

So, the angular acceleration of CD player is [tex]13.93\ rad/s^2[/tex].

Arm OA rotates counterclockwise with a constant angular velocity of ω = 5 rad/s. As the arm passes the horizontal position, a 6 kg ball is placed at the end of the arm. As the arm moves upward, the ball begins to roll, with negligible rolling resistance, towards the pivot O. It is noted that at θ = 30 ◦ , the ball is 0.9 meters from the pivot and moving towards O along the length of the arm. The ball moves with a speed of 0.4 m/s along the bar. What is the normal force that the arm applies to the ball at this instant? Please, indicate which principle you are applying and explain why.

Answers

Answer:

26.92 N

Explanation:

The normal reaction of the ball is due to two force component acting on it.

The normal reaction as a result of the weight of the  ballThe normal reaction due to the component of the acceleration of the ball with the rod.

However ; the acceleration is in polar coordinate which is given by the relation:

[tex]a^ { ^ \to} = (r- r \omega^2) \hat {e_r} + ( r \theta + 2 r \omega ) \hat {e_ \theta}[/tex]

[tex]a_{\theta} = r \theta + 2 r \omega[/tex]

Given that :

ω = 5 rad/s

mass m = 6 kg

θ = 30 ◦

r = 0.9 m

speed v =  0.4 m/s

[tex]a_{\theta} = 0 + 2(-0.4)*5[/tex]

[tex]a_{\theta}= -4 \ m/s[/tex]

The normal force reaction (N) that the arm applies to the ball at this instant is :

N = mg cos θ  + [tex]ma_{\theta}[/tex]

N = (6 × 9.8× cos 30) + (6 ×(-4))

N = 26.92 N

Consider a circular vertical loop-the-loop on a roller coaster. A car coasts without power around the loop. Determine the difference between the normal force exerted by the car on a passenger with a mass of mm at the top of the loop and the normal force exerted by the car on her at the bottom of the loop. Express your answer in terms of mmm and the acceleration due to gravity ggg.

Answers

Answer:

Explanation:

Let v₁ and v₂ be velocities at lowest and topmost position . Let r be the radius of the circle .

Let N₁ and N₂ be the normal reaction force .

At the top position

centripetal force = N₂ + mg ;  so

N₂ + mg  = m v₂² / r

At the bottom  position

centripetal force = N₁ - mg ;  so

N₁ - mg  = m v₁² / r

subtracting these two equations

N₁ - mg - N₂ - mg = m v₁² / r  - m v₂² / r

N₁ - N₂ - 2mg = 1/r (m v₁²   - m v₂²  )

N₁ - N₂ - 2mg = 1/r x mg x 2r  ( loss of potential energy = gain of kinetic energy )

N₁ - N₂ =  2mg +  2mg

= 4 mg .

A brick is dropped from a high scaffold.
a. How far does the brick fall during this time?

Answers

Answer:

a: after 1 seconds it will have fallen 0.2452

after 2 seconds it will have fallen 0.981

after 3 seconds it will have fallen 2.2072

after 4 seconds it will have fallen 3.924

Explanation:

the formula for acceleration due to gravity is (ignoring friction I think)

g = G*M/R^2

earths gravitational constant is about 9.807

g = 9.807*M/R^2

The average weight of a brick is 5 pounds and I'm going to say it's 10 feet off the ground.

g = 9.807*5/10^2.         g = 0.4905 so every second the brick will go 0.4905 fps faster. (fps means feet per second.)

after 1 seconds it will have fallen 0.2452

after 2 seconds it will have fallen 0.981

after 3 seconds it will have fallen 2.2072

after 4 seconds it will have fallen 3.924

A very light low-friction cyclindrical turntable is mounted on a study base. Although it is balanced, its density may not be uniform. Design an experimental method to gather data that can be used to determine the rotational inertia of the turntable. In each part, provide the explanations and/or diagrams necessary to support your response.
First, list all the equipment you will use and describe what measurements you will take and how you will take them, in enough detail so that another student could carry out your experiment. Use diagrams to clarify your experimental setup.

Answers

Answer:

Check the explanation

Explanation:

Kindly check the attached image below to see the step by step explanation to the question above.

Other Questions
Shirley measures the thickness of the sides of a cardboard box using a ruler that has centimeter and inch markingis most likely the value that Shirley measures?A.3.0 inNewB.3.0 mmOC.2.85 mmOD0.118 in e:Scientists think the earth is approximately how old?2 billion years3 billion yearsfor 4 12 billion years612 billion yearsScientists think the earth is approximately how old Understanding Different Types of CreditCheckSort each scenario into the correct category based on the type of credit it represents.title loan with collateralEasy-Access CreditOpen-End CreditVClosed-End Creditcar loantwo-week payday loancredit cardhome loan$2000 monthly line of credit) IntroDone Which of the following statements best described the domino theory? a. The United States feared that if one country in the Pacific fell to communism, than eventually they would all fall to communism. It was believed that if communism could be stopped it would protect the region. c. After the Philippines gained independence and created a democratic government, many communist countries feared that they would soon loss their strong hold against other democratic nations. b. The North Vietnamese government feared that if the United States got involved in their conflict, other major global powers would assist and they would loss control in South Vietnam. d. After the conflict between Vietnam and the United States began, it was feared that the United States was going to have to supply an endless number of troops and supplies to fully defeat North Vietnam.I NEED AN ANSWER FAST!! How many moles of sugar, C12H22O11, are in 52 mL of a 0.50 M solution? For the inverse variation equation xy = k, what is the constant of variation, k, when x = 7 and y = 3? Which of the following did General Douglas MacArthur do in the Southwest Pacific during World War II? Escoge la opcin correcta.A diferencia de las calesitas en los Estados Unidos, en los pases hispanos, la calesita tiene______.un puesto ambulante que da vueltasuna sortija para sacarcaballos vivientescolumpios y toboganes True/False: Disease and Invasive Species are two causes of extinction. can someone please help with these two questions fast !! For a patient taking cephalexin 1000 mg by mouth three times a day for 10 days, how manycapsules of 250mg cephalexin would the patient receive in 1 dose. Craig is a football player training over the summer for next season. The coach demands that all players come in at 6:00 AM and lift weights until 8:00 AM, when practice begins. Craig gets there at 5:00 AM to begin his training.What character trait/qualities does Craig demonstrate? Solve using substitutions! Help w this question please!! PLEASE HURRY ! Cuando abordas (when you board) el avin, tena. el mapab. el vuelomano (on hand).c. la tarjeta de embarque Tia is going to create another sculpture that has the same dimensions, but it will not be hollow. She plans to use wood for the new sculpture. What dimensions of the triangular prism will Tia need to know in order to determine the amount of wood she will need for the sculpture? Explain. A 5.72-L football is filled with air at 1.85 atm. At the same temperature, the volume of the football is reduced to 2.13 L. What is the pressure of air in the ball? What are examples of twospecies dividing up the parts of a habitat? helpppp plzzzz On January 1, 2020, Martinez Company makes the two following acquisitions. 1. Purchases land having a fair value of $330,000 by issuing a 4-year, zero-interest-bearing promissory note in the face amount of $483,153. 2. Purchases equipment by issuing a 6%, 9-year promissory note having a maturity value of $380,000 (interest payable annually). The company has to pay 10% interest for funds from its bank. (a) Record the two journal entries that should be recorded by Martinez Company for the two purchases on January 1, 2020. (b) Record the interest at the end of the first year on both notes using the effective-interest method. Photograph did not become common until the middle to late 1800s. Why do you think the author used illustrations to show scenes from John Chapmans life Please help will be greatly appreciated