Answer:
A = 26.875 rad/s²
Explanation:
Given the following data;
Initial angular speed, Uw = 150 rads/s.
Final angular speed, Vw = 580 rads/s.
Time = 16 seconds.
To calculate the angular acceleration;
From kinematics equation;
At = Vw - Uw
Where;
A is the angular acceleration.t is the timeVw is the final angular speed.Uw is the initial angular speed.Substituting into the formula, we have;
A*16 = 580 - 150
16A = 430
A = 430/16
A = 26.875 rad/s²
0. The temperature of source is 500K with source energy 2003, what is the temperature of sink with sink energy 100 J? a. 500 K b. 300 K c. 250 K d. 125 K
Answer:
c. 250k
Explanation:
The temperature of the sink is approximately 250 K.
To find the temperature of the sink, we can use the formula for the efficiency of a heat engine:
Efficiency = 1 - (Temperature of Sink / Temperature of Source)
Given that the temperature of the source (T_source) is 500 K and the source energy (Q_source) is 2003 J, and the sink energy (Q_sink) is 100 J, we can rearrange the formula to solve for the temperature of the sink (T_sink):
Efficiency = (Q_source - Q_sink) / Q_source
Efficiency = (2003 J - 100 J) / 2003 J
Efficiency = 1903 J / 2003 J
Efficiency = 0.9497
Now, plug the efficiency back into the first equation to solve for T_sink:
0.9497 = 1 - (T_sink / 500 K)
T_sink / 500 K = 1 - 0.9497
T_sink / 500 K = 0.0503
Now, isolate T_sink:
T_sink = 0.0503 * 500 K
T_sink = 25.15 K
Since the temperature should be in Kelvin, we round down to the nearest whole number, which is 25 K. Thus, the temperature of the sink is approximately 250 K.
To learn more about sink energy, here
https://brainly.com/question/10483137
#SPJ2
When an apple falls towards the earth,the earth moves up to meet the apple. Is this true?If yes, why is the earth's motion not noticeable?
Answer:
Yes, when an apple falls towards the earth, the apple gets accelerated and comes down due to the gravitational force of attraction used by the earth. The apple also exerts an equal and opposite force on the earth but the earth does not move because the mass of the apple is very small, due to which the gravitational force produces a large acceleration in it (a = F/m) but the mass of the earth is very large, the same gravitational force produces very small acceleration in the earth and we don't see the earth rising towards the apple.
Differentiate between Scalar quantity and Vector quantity and give two examples each
The following two waves are sent in opposite directions on a horizontal string so as to create a standing wave in a vertical plane: y1(x, t) = (8.20 mm) sin(4.00πx - 430πt) y2(x, t) = (8.20 mm) sin(4.00πx + 430πt), with x in meters and t in seconds. An antinode is located at point A. In the time interval that point takes to move from maximum upward displacement to maximum downward displacement, how far does each wave move along the string?
Answer:
Explanation:
From the information given:
The angular frequency ω = 430 π rad/s
The wavenumber k = 4.00π which can be expressed by the equation:
k = ω/v
∴
4.00 = 430 /v
v = 430/4.00
v = 107.5 m/s
Similarly: k = ω/v = 2πf/fλ
We can say that:
k = 2π/λ
4.00 π = 2π/λ
wavelength λ = 2π/4.00 π
wavelength λ = 0.5 m
frequency of the wave can now be calculated by using the formula:
f = v/λ
f = 107.5/0.5
f = 215 Hz
Also, the Period(T) = 1/215 secs
The time at which particle proceeds from point A to its maximum upward displacement and to its maximum downward displacement can be computed as t = T/2;
Thus, the distance(x) covered by each wave during this time interval(T/2) will be:
x = v * t
x = v * T/2
x = λ/2
x = 0.5/2
x = 0.25 m
g Consider a mass-spring system where the spring constant is 5 N/m and the mass on the spring is 0.5 kg. The mass is moved a distance of -0.9 m from its equilibrium position. How much work is done by the spring
Answer:
The work done by the spring is 2.025 J
Explanation:
Given;
mass on the spring, m = 0.5 kg
spring constant, k = 5 N/m
extension of the spring, x = 0.9 m
The work done by the spring is calculated as;
[tex]W = \frac{1}{2} kx^2\\\\W = \frac{1}{2} \times 5 \times (0.9)^2\\\\W = 2.025 \ J[/tex]
Therefore, the work done by the spring is 2.025 J
When you stand on tiptoes on a bathroom scale, there is an increase in
A) weight reading.
B) pressure on the scale, not registered as weight.
C) both weight and pressure on the scale.
D) none of the above
Answer:
B) Pressure on the scale, not registered as weight.
Explanation:
This is because energy (derived from weight) becomes compiled on the tips of your toes, and therefore does not increase your weight, but simply the pressure at a smaller point
A uniform metre rule of mass 10g is balanced on a knife edge placed at 45cm mark. Calculate the distance of a mass 25g from the pivot
Answer:
The distance of a mass 25g from the pivot is 18cm
Explanation:
Given
[tex]m_1 = 10g[/tex]
[tex]d_1 = 45cm[/tex]
[tex]m_2 = 25g[/tex]
Required
Distance of m2 from the pivot
To do this, we make use of:
[tex]m_1 * d_1 = m_2 * d_2[/tex] --- moments of the masses
So, we have:
[tex]10 * 45= 25* d_2[/tex]
[tex]450= 25* d_2[/tex]
Divide both sides by 25
[tex]18= d_2[/tex]
Hence:
[tex]d_2 = 18[/tex]
Which of the following represents the velocity time relationship for a falling apple?
Answer "a" would be correct.
Answer:
d
Explanation:
There's an acceleration from gravity, thus the velocity is becoming faster and faster as it reaches the ground. Thus its D
Brainliest please~
Convierta 8.5mW a cal/h (1 cal=4.186 j)
Answer:
[tex] = { \bf{2.03 \times {10}^{ - 6} }}[/tex]
Turning a corner at a typical large intersection in a city means driving your car through a circular arc with a radius of about 25 m. if the maximum advisable acceleration of your vehicle through a turn on wet pavement is 0.40 times the free-fall acceleration, what is the maximum speed at which you should drive through this turn?
Answer:
9.89 m/s.
Explanation:
Given that,
The radius of the circular arc, r = 25 m
The acceleration of the vehicle is 0.40 times the free-fall acceleration i.e.,a = 0.4(9.8) = 3.92 m/s²
Let v is the maximum speed at which you should drive through this turn. It can be solved as follows :
[tex]a=\dfrac{v^2}{r}\\\\v=\sqrt{ar} \\\\v=\sqrt{3.92\times 25} \\\\=9.89 m/s[/tex]
So, the maximum speed of the car should be 9.89 m/s.
You have three identical metallic spheres, A, B and C, fixed to isolating pedestals. They all start off uncharged. You then charge sphere A to +32.0 uC. You use rubber gloves to move sphere A so that it briefly touches sphere B, and then is separated. Next, sphere A briefly touches sphere C, and again is separated. Finally, sphere A touches sphere B a second time, and is again separated. What will be the final charge of sphere B?
Answer:
Charge on B is 12 uC.
Explanation:
Initial charge on A = 32 uC
Initial charge on B and C = 0
Now A touches to B, so the charge on A and B both is
q = (32 + 0) / 2 = 16 uC
Now A touches to C, so the charge on A and C both is
q' = (16 + 0) / 2 = 8 uC
Now again A touches to B so the charge on B is
q''= (8 + 16) / 2 = 12 uC
David is driving a steady 30 m/s when he passes Tina, who is sitting in her car at rest. Tina begins to accelerate at a steady 2.0 m/s2 at the instant when David passes. How far does Tina drive before passing David?
A single-turn square loop of wire, 2.00 cm on each edge, carries a clockwise current of 0.240 A. The loop is inside a solenoid, with the plane of the loop perpendicular to the magnetic field of the solenoid. The solenoid has 30.0 turns/cm and carries a clockwise current of 15.0 A. Find:
a. the force on each side of the loop
b. the torque acting on the loop.
Answer:
Explanation:
a )
Magnetic field inside solenoid B = μ₀ NI ,
μ₀ = 4π x 10⁻⁷ ; N is no of turns per meter length in solenoid and I is current B= 4π x 10⁻⁷ x 30 x 10² x 15
= .0565 T .
Force on each side of square loop = B i L
B is external magnetic field , i is current in loop and L is length of side
Force on each side of square loop = .0565 x .24 x 2 x 10⁻²
= 2.7 x 10⁻⁴ N .
b )
Torque on the loop = F x d
F is force on one side , d is distance between two sides , that is side of the square loop
= 2.7 x 10⁻⁴ x 2 x 10⁻² N.m
= 5.4 x 10⁻⁶ N.m .
If you buy an amateur-sized reflecting telescope, say around 10 inches (25cm) aperture, it'll have something in it that sends the gathered starlight out the side of the telescope tube. What do we call this thing
Answer: objective lens
Explanation:
Light enters a refra
Light enters a telescope through a lens at the upper end, which focuses the light near the bottom of the telescope. An eyepiece then magnifies the image so that it can be viewed by the eye, or a detector like a photographic plate can be placed at the focus. The upper end of a reflecting telescope is open, and the light passes through to the mirror located at the bottom of the telescope. The mirror then focuses the light at the top end, where it can be detected. Alternatively, a second mirror may reflect the light to a position outside the telescope structure, where an observer can have easier access to it.
The pressure exerted at the bottom of a column of liquid is 30 kPa. The height of the
column is 3,875 m. What type of liquid is used?
Answer:
For example, the pressure acting on a dam at the bottom of a reservoir is ... pressure = height of column × density of the liquid × gravitational field ... The density of water is 1,000 kg/m 3.
A water-balloon launcher with mass 2 kg fires a 0.75 kg balloon with a
velocity of 14 m/s to the west. What is the recoil velocity of the launcher?
What is the answer
Answer:
5.25 m/s to the east
Explanation:
Applying,
MV = mv.............. Equation 1
Where M = mass of the launcher, V = recoil velocity of the launcher, m = mass of the balloon, v = velocity of the balloon
make V the subject of the equation
V = mv/M............ Equation 2
From the question,
M = 2 kg, m = 0.75 kg, v = 14 m/s
Substitute these values into equation 2
V = (0.75×14)/2
V = 5.25 m/s to the east
A body of mass 2kg is released from from a point 100m above the ground level. calculate kinetic energy 80m from the point of released.
Answer:
1568J
Explanation:
Since the problem states 80 m from the point of drop, the height relative to the ground will be 100-80=20m.
Use conservation of Energy
ΔUg+ΔKE=0
ΔUg= mgΔh=2*9.8*(20-100)=-1568J
ΔKE-1568J=0
ΔKE=1568J
since KEi= 0 since the object is at rest 100m up, the kinetic energy 20meters above the ground is 1568J
g As they reach higher temperatures, most semiconductors... Selected Answer: have an increased resistance. Answers: have a constant resistance. have an increased resistance. have a decreased resistance.
Answer:
have an increased resistance
A pilot flies her route in two straight-line segments. The displacement vector A for the first segment has a magnitude of 243 km and a direction 30.0o north of east. The displacement vector for the second segment has a magnitude of 178 km and a direction due west. The resultant displacement vector is R = A + B and makes an angle ? with the direction due east. Using the component method, find (a) the magnitude of R and (b) the directional angle ?.
(a) R = km
(b) ? = degrees
Answer:
a) [tex]R=126Km[/tex]
b) [tex]\theta=74.6\textdegree[/tex]
Explanation:
From the question we are told that:
1st segment
243km at Angle=30
2nd segment
178km West
Resolving to the X axis
[tex]F_x=243cos30+178[/tex]
[tex]F_x=33.44Km[/tex]
Resolving to the Y axis
[tex]F_y=243sin30+178sin0[/tex]
[tex]R=\sqrt{F_y^2+F_x^2}[/tex]
[tex]F_y=121.5Km[/tex]
Therefore
Generally the equation for Directional Angle is mathematically given by
[tex]\theta=tan^{-1}\frac{F_y}{F_x}[/tex]
[tex]\theta=tan^{-1}\frac{121.5}{33.44}[/tex]
[tex]\theta=74.6\textdegree[/tex]
Generally the equation for Magnitude is mathematically given by
[tex]R=\sqrt{F_y^2+F_x^2}[/tex]
[tex]R=\sqrt{33.44^2+121.5^2}[/tex]
[tex]R=126Km[/tex]
A 2090-kg test rocket is launched vertically from the launch pad. Its fuel (of negligible mass) provides a thrust force so that its vertical velocity as a function of time is given by v(t) =At+Bt^2 , where A and B are constants and time is measured from the instant the fuel is ignited. The rocket has an upward acceleration of 1.50m/s 2 at the instant of ignition and, 1.00 s later, an upward velocity of 2.00 m/s. (a) Determine A and B , including their SI units. (b) At 4.00 s after fuel ignition, what is the acceleration of the rocket, and (c) what thrust force does the burning fuel exert on it, assuming no air resistance? Express the thrust in newtons and as a multiple of the rocket’s weight. (d) What was the initial thrust due to the fuel?
Answer:
a) A = 1.50 m / s², B = 1.33 m/s³, b) a = 12.1667 m / s²,
c) I = M (1.5 t + 1.333 t²) , d) ΔI = M 2.833 N
Explanation:
In this exercise give the expression for the speed of the rocket
v (t) = A t + B t²
and the initial conditions
a = 1.50 m / s² for t = 0 s
v = 2.00 m / s for t = 1.00 s
a) it is asked to determine the constants.
Let's look for acceleration with its definition
a = [tex]\frac{dv}{dt}[/tex]
a = A + 2B t
we apply the first condition t = 0 s
a = A
A = 1.50 m / s²
we apply the second condition t = 1.00 s
v = 1.5 1 + B 1²
2 = 1.5 + B
B = 2 / 1.5
B = 1.33 m/s³
the equation remains
v = 1.50 t + 1.333 t²
b) the acceleration for t = 4.00 s
a = 1.50 + 1.333 2t
a = 1.50 + 2.666 4
a = 12.1667 m / s²
c) The thrust
I = ∫ F dt = p_f - p₀
Newton's second law
F = M a
F = M (1.5 + 2 1.333 t) dt
we replace and integrate
I = M ∫ (1.5 + 2.666 t) dt
I = 1.5 t + 2.666 t²/2
I = M (1.5 t + 1.333 t²) + cte
in general the initial rockets with velocity v = 0 for t = 0, where we can calculate the constant
cte = 0
I = M (1.5 t + 1.333 t²)
d) the initial push
For this we must assume some small time interval, for example between
t = 0 s and t = 1 s
ΔI = I_f - I₀
ΔI = M (1.5 1 + 1.333 1²)
ΔI = M 2.833 N
Find the magnitude and direction of a force between a 25.0 coulomb charge and a 40.0coulomb charge when they are separated by a distance of 30.0cm
Answer:
95.0 colomb
Explanation:
Make sure to understand the concept
At which point is the kinetic energy of the pendulum the greatest?
C
A
D
B
Answer:
Point C
Explanation:
Greatest Kinetic Energy means lowest potential energy since energy is conserved. Lowest potential energy means lowest height which is at Point C.
3. You have a variable-voltage power supply and a capacitor in the form of two metal disks of radius 0.6 m, held a distance of 1 mm apart. What is the largest voltage you can apply to the capacitor without the air becoming highly conductive
Answer:
The breakdown of air occurs at a maximum voltage of 3kV/mm.
Explanation:
The breakdown of air occurs at a maximum voltage of 3kV/mm.
At this level of voltage the air between the plates become highly ionised and breakdown occurs. Since, the distance held between the plates is 1mm , it can withstand a maximum voltage of 3 kV.
After this voltage the air will become conductive in nature and will form ions in the air between the plates and ultimately breakdown will take place with a flash.
When an object is in free fall, ____________________.
Answer:
Objects that are said to be undergoing free fall, are not encountering a significant force of air resistance; they are falling under the sole influence of gravity.
Explanation:
Under such conditions, all objects will fall with the same rate of acceleration, regardless of their mass.
An electron moving in the y direction, at right angles to a magnetic field, experiences a magnetic force in the -x direction. The direction of the magnetic field is in the
Answer:
The direction of magnetic field is along + Z axis.
Explanation:
The direction of motion of electron is along y axis.
The magnetic force is along - X axis.
The force on the charged particle moving in the magnetic field is
[tex]\overrightarrow{F} = q (\overrightarrow{v}\times \overrightarrow{B})\\\\- F \widehat{i} = - q (v \widehat{j}\times \overrightarrow{B})\\[/tex]
So, the direction of the magnetic field is along + Z axis.
A wave moves in a rope with a certain wavelength. A second wave is made to move in the same rope with twice the wavelength of the first wave. The frequency of the second wave is _______________ the frequency of the first wave.
Answer:
The frequency of the second wave is half of the frequency of first one.
Explanation:
The wavelength of the second wave is double is the first wave.
As we know that the frequency is inversely proportional to the wavelength of the velocity is same.
velocity = frequency x wavelength
So, the ratio of frequency of second wave to the first wave is
[tex]\frac{f_2}{f_1} =\frac{\lambda _1}{\lambda _2}\\\\\frac{f_2}{f_1} =\frac{\lambda _1}{2\lambda _1}\\\\\frac{f_2}{f_1} =\frac{1}{2}\\\\[/tex]
The frequency of the second wave is half of the frequency of first one.
what does it mean to do science
Answer:
Doing science could be defined as carrying out scientific processes, like the scientific method, to add to science's body of knowledge.
convert 2.4 milimetres into metre
Answer: 2.4 millimeters = 0.0024 meters
Explanation: A millimeter is 1/1000 of a meter. By diving 2.4 by 1000, you get 0.0024.
Find the refractive index of a medium
having a velocity of 1.5 x 10^8*
Explanation:
refractive index ,is the ratio of velocity of light in vacuum to the velocity of light a medium
Magnets produce _________ in the spaces surrounding them
Answer:
magnetic field
Explanation:
