Answer:
176.8 g of ammonia, NH3.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
N2 + 3H2 —> 2NH3
Next, we shall determine the mass of H2 that reacted and the mass of NH3 produced from the balanced equation. This is illustrated below:
Molar mass of H2 = 2x1 = 2 g/mol
Mass of H2 from the balanced equation = 3 x 2 = 6 g
Molar mass of NH3 = 14 + (3x1) = 17 g/mol
Mass of NH3 from the balanced equation = 2 x 17 = 34 g.
From the balanced equation above,
6 g of H2 reacted to produce 34 g of NH3.
Finally, we shall determine the mass of ammonia, NH3 produced by reacting 31.2 g of H2.
This can be obtained as follow:
From the balanced equation above,
6 g of H2 reacted to produce 34 g of NH3.
Therefore, 31.2 g of H2 will react to produce = (31.2 x 34)/6 = 176.8 g of NH3.
Therefore, 176.8 g of ammonia, NH3 were obtained from the reaction.
How many atoms are in 65.0g of zinc?
from
1moles=iatom
Mole=mass÷avogardos
Where
Avogadro's= 6.02×10²³
So moles = 65.0÷6.02×10²³
Atoms of zinc = 391.6 ×10²³
The number of atoms present in the given mass of Zinc that is 65.0gm is [tex]5.99\times10^{ 23}[/tex].
Atoms are the basic building blocks of matter. They are the smallest units of an element that retain the chemical properties of that element.
Now, to determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately [tex]6.022 \times10^{23}[/tex]atoms per mole.
First, we calculate the number of moles of zinc in 65.0g by dividing the given mass by the molar mass of zinc. The molar mass of zinc (Zn) is 65.38 g/mol.
Number of moles = Mass / Molar mass
Number of moles = 65.0g / 65.38 g/mol ≈ 0.9942 mol
Next, multiply the number of moles by Avogadro's number to find the number of atoms.
Number of atoms =[tex]Number of moles \times Avogadro's number[/tex]
Number of atoms = [tex]0.9942[/tex]mol × [tex]6.022 \times10^{23}[/tex] atoms/mol
Therefore, approximately [tex]5.99\times10^{ 23}[/tex] atoms are present in 65.0g of zinc.
Learn more about atoms here:
https://brainly.com/question/1566330
#SPJ2
People take antacids, such as milk of magnesia, to reduce the discomfort of acid stomach or heartburn. The recommended dose of milk of magnesia is 1 teaspoon, which contains 500 mg of Mg(OH)2. What volume of HCl solution with a pH of 1.25 can be neutralized by 1 dose of milk of magnesia
Answer:
[tex]V_{HCl}=0.208L=208mL[/tex]
Explanation:
Hello,
In this case, since the chemical reaction is:
[tex]2HCl+Mg(OH)_2\rightarrow MgCl_2+2H_2O[/tex]
We can see that hydrochloric acid and magnesium hydroxide are in a 2:1 mole ratio, which means that the neutralization point, we can write:
[tex]n_{HCl}=2*n_{Mg(OH)_2}[/tex]
In such a way, the moles of magnesium hydroxide (molar mass 58.3 g/mol) in 500 mg are:
[tex]n_{Mg(OH)_2}=500mg*\frac{1g}{1000mg}*\frac{1mol}{58.3g} =0.00858mol[/tex]
Next, since the pH of hydrochloric acid is 1.25, the concentration of H⁺ as well as the acid (strong acid) is:
[tex][H^+]=[HCl]=10^{-pH}=10^{-1.25}=0.0562M[/tex]
Then, since the concentration and the volume define the moles, we can write:
[tex][HCl]*V_{HCl}=2*n_{Mg(OH)_2}[/tex]
Therefore, the neutralized volume turns out:
[tex]V_{HCl}=\frac{2*0.00858mol}{0.0562\frac{mol}{L} }\\ \\V_{HCl}=0.208L=208mL[/tex]
Best regards.
Come up with a definition for density
Density measures how tightly packed particles are.
If particles are tightly packed together, they will be more dense.
If they are loosely together, they will be less dense.
However, a common mistake is thinking that if something
is more dense it means that it's heavier.
However, that's not the case.
It has to do with how particles are packed in an object.
g Use the References to access important values if needed for this question. A researcher took 2.592 g of a certain compound containing only carbon and hydrogen and burned it completely in pure oxygen. All the carbon was changed to 7.851 g of CO2, and all the hydrogen was changed to 4.018 g of H2O . What is the empirical formula of the original compound
Answer:
Empirical formula is: C₂H₅
Explanation:
The chemical equation of burning of a compound that conatins only Carbon and Hydrogen is:
CₓHₙ + O₂ → XCO₂ + n/2H₂O
That means the moles of CO₂ produced are the moles of Carbon in the compound and moles of hydrogen are twice moles of water. Empirical formula is the simplest ratio between moles of each element in the compound. Thus, finding molse of C and moles of H we can find empirical formula:
Moles C and H:
Moles C = Moles CO₂:
7.851g CO₂ ₓ (1mol / 44g) = 0.1784 moles CO₂ = Moles C
Moles H = 2 Moles H₂O
4.018g H₂O ₓ (1mol / 18.01g) = 0.2231 * 2 = 0.4417 moles H
Ratio C:H
The ratio between moles of hydrogen and moles of Carbon are:
0.4417 moles H / 0.1784 moles C = 2.5
That means there are 2.5 moles of H per mole of Carbon. As empirical formula must be given only in whole numbers,
Empirical formula is: C₂H₅Calculate the [H+] and pH of a 0.0010 M acetic acid solution. The Ka of acetic acid is 1.76×10−5. Use the method of successive approximations in your calculations.
Answer:
[tex][H^+]=0.000123M[/tex]
[tex]pH=3.91[/tex]
Explanation:
Hello,
In this case, dissociation reaction for acetic acid is:
[tex]CH_3COOH\rightleftharpoons CH_3COO^-+H^+[/tex]
For which the equilibrium expression is:
[tex]Ka=\frac{[CH_3COO^-][H^+]}{[CH_3COOH]}[/tex]
Which in terms of the reaction extent [tex]x[/tex] could be written as:
[tex]1.74x10^{-5}=\frac{x*x}{[CH_3COOH]_0-x}=\frac{x*x}{0.0010M-x}[/tex]
Thus, solving by using a solver or quadratic equation we obtain:
[tex]x_1=0.000123M\\\\x_2=-0.000141M[/tex]
And clearly the result is 0.000123M, which also equals the concentration of hydronium ion in solution:
[tex][H^+]=0.000123M[/tex]
Now, the pH is computed as follows:
[tex]pH=-log([H^+])=-log(0.000123)\\\\pH=3.91[/tex]
Best regards.
g Which ONE of the following pure substances will exhibit hydrogen bonding? A) methyl fluoride, FCH3 B) dimethyl ether, CH3C–O–CH3 C) formaldehyde, H2C=O D) trimethylamine, N(CH3)3 E) hydrazine, H2N-NH2
Answer:
C) formaldehyde, H2C=O.
Explanation:
Hello,
In this case, given that the hydrogen bondings are known as partial intermolecular interactions between a lone pair on an electron rich donor atom, particularly oxygen, and the antibonding molecular orbital of a bond between hydrogen and a more electronegative atom or group. Thus, among the options, C) formaldehyde, H2C=O, will exhibit hydrogen bonding since the lone pair of electrons of the oxygen at the carbonyl group, are able to interact with hydrogen (in the form of water).
Best regards.
For a particular reaction at 235.8 °C, ΔG=−936.92 kJ/mol , and ΔS=513.79 J/(mol⋅K) . Calculate ΔG for this reaction at −9.9 °C.
Answer:
-138.9 kJ/mol
Explanation:
Step 1: Convert 235.8°C to the Kelvin scale
We will use the following expression.
K = °C + 273.15 = 235.8°C + 273.15 = 509.0 K
Step 2: Calculate the standard enthalpy of reaction (ΔH°)
We will use the following expression.
ΔG° = ΔH° - T.ΔS°
ΔH° = ΔG° / T.ΔS°
ΔH° = (-936.92kJ/mol) / 509.0K × 0.51379 kJ/mol.K
ΔH° = -3.583 kJ (for 1 mole of balanced reaction)
Step 3: Convert -9.9°C to the Kelvin scale
K = °C + 273.15 = -9.9°C + 273.15 = 263.3 K
Step 4: Calculate ΔG° at 263.3 K
ΔG° = ΔH° - T.ΔS°
ΔG° = -3.583 kJ/mol - 263.3 K × 0.51379 kJ/mol.K
ΔG° = -138.9 kJ/mol
A saturated sodium carbonate solution at 0°C contains 7.1 g of dissolved sodium carbonate per 100. mL of solution. The solubility product constant for sodium carbonate at this temperature is
Answer:
[tex]Ksp=1.2[/tex]
Explanation:
Hello,
In this case, as the saturated solution has 7.1 grams of sodium carbonate, the solubility product is computed by firstly computing the molar solubility by using its molar mass (106 g/mol):
[tex]Molar \ solubility=\frac{7.1gNa_2CO_3}{0.1L}*\frac{1molNa_2CO_3}{106gNa_2CO_3}=0.67M[/tex]
Next, as its dissociation reaction is:
[tex]Na_2CO_3(s)\rightleftharpoons 2Na^+(aq)+CO_3^{2-}(aq)[/tex]
The equilibrium expression is:
[tex]Ksp=[Na^+]^2[CO_3^{2-}][/tex]
And the concentrations are related with the molar solubility (2:1 mole ratio between ionic species):
[tex]Ksp=(2*0.67)^2*(0.67)\\\\Ksp=1.2[/tex]
Best regards.
An atom of 120In has a mass of 119.907890 amu. Calculate the mass defect (deficit) in amu/atom. Use the masses: mass of 1H atom
Answer:
a
Explanation:
answer is a on edg
Will a precipitate (ppt) form when 300. mL of 2.0 × 10 –5 M AgNO 3 are added to 200. mL of 2.5 × 10 –9 M NaI? Answer yes or no, and identify the precipitate if there is one
Answer:
A precipitate will form, AgI
Explanation:
When Ag⁺ and I⁻ ions are in an aqueous media, AgI(s), a precipitate, is produced or not based on its Ksp expression:
Ksp = 8.3x10⁻¹⁷ = [Ag⁺] [I⁻]
Where the concentrations of the ions are the concentrations in equilibrium
For actual concentrations of a solution, you can define Q, reaction quotient, as:
Q = [Ag⁺] [I⁻]
If Q > Ksp, the ions will react producing BaCO₃, if not, no precipitate will form.
Actual concentrations of Ag⁺ and I⁻ are:
[Ag⁺] = [AgNO₃] = 2.0x10⁻⁵ × (300mL / 500.0mL) = 1.2x10⁻⁵M
[I⁻] = [NaI] = 2.5x10⁻⁹ × (200mL / 500.0mL) = 1.0x10⁻⁹M
500.0mL is the volume of the mixture of the solutions
Replacing in Q expression:
Q = [Ag⁺] [I⁻]
Q = [1.2x10⁻⁵M] [1.0x10⁻⁹M]
Q = 1.2x10⁻¹⁴
As Q > Ksp
A precipitate will form, AgIWhat is the balanced equation for the reaction of aqueous cesium sulfate and aqueous barium perchlorate?
Answer:
The balanced chemical reaction is given as:
[tex]Cs_2SO_4(aq)+Ba(ClO_4)_2(aq)\rightarrow BaSO_4(s)+2CsClO_4(aq)[/tex]
Explanation:
When aqueous cesium sulfate and aqueous barium perchlorate are mixed together it gives white precipitate barium sulfate and aqueous solution od cesium perchlorate.
The balanced chemical reaction is given as:
[tex]Cs_2SO_4(aq)+Ba(ClO_4)_2(aq)\rightarrow BaSO_4(s)+2CsClO_4(aq)[/tex]
According to reaction, 1 mole of cesium sulfate reacts with 1 mole of barium perchlorate to give 1 mole of a white precipitate of barium sulfate and 2 moles of cesium perchlorate.
Explain why only the lone pairs on the central atom are taken into consideration when predicting molecular shape
Answer:
Lone pairs cause more repulsion than bond pairs
Explanation:
A lone pair takes up more space around the central atom than bond pairs of electrons. This is because, a lone pair is attracted to only one nucleus while bond pairs are attracted to two nuclei.
Hence the repulsion between lone pairs is far greater than the repulsion between bond pairs or repulsion between a lone pair and a bond pair. The presence of a lone pair therefore distorts a molecule away from the ideal shape predicted on the basis of the valence shell electron pair repulsion theory.
Lone pairs are found to decrease the observed bond angles in a molecule.
2NO + 2H2 ⟶N2 + 2H2O What would the rate law be if the mechanism for this reaction were: 2NO + H2 ⟶N2 + H2O2 (slow) H2O2 + H2 ⟶2H2O (fast)
Answer:
rate = [NO]²[H₂]
Explanation:
2NO + H2 ⟶N2 + H2O2 (slow)
H2O2 + H2 ⟶2H2O (fast)
From the question, we are given two equations.
In chemical kinetics; that is the study of rate reactions and changes in concentration. The rate law is obtained from the slowest reaction.
This means that our focus would be on the slow reaction. Generally the rate law is obtained from the concentrations of reactants in a reaction.
This means our rate law is;
rate = [NO]²[H₂]
The surface temperature on Venus may approach 753 K. What is this temperature in degrees Celsius?
Answer:
461.85 degrees Celsius
Which solution has the greatest buffer capacity? Select the correct answer below: 1 mole of acid and 1 mole of base in a 1.0 L solution
Answer:
The answer is
Explanation:
1 mole of acid.
Hope this helps....
Have a nice day!!!!
A buffer that is 1 M in acid and base will have the greatest capacity of buffer, and therefore the greatest buffer capacity.
What do you mean by the buffer solution ?A weak acid and the conjugate base of the weak acid, or a weak base and the conjugate acid of the weak base, are combined to form the buffer solution, a water-based solvent solution.
In a biological system, a buffer's keep intracellular and extracellular pH levels within a relatively small range and to withstand pH fluctuations brought on by both internal and external factors.
A buffer is a substance that can withstand a pH shift when acidic or basic substances are added. It may balance out little quantities of additional acid or base, keeping the pH stable.
Thus, 1 M in acid and base solution has the greatest buffer capacity.
To learn more about the buffer solution, follow the link;
https://brainly.com/question/24262133
#SPJ6
what are the monomers of bakelite
Answer:
Bakelite is a polymer made up of the monomers phenol and formaldehyde. This phenol-formaldehyde resin is a thermosetting polymer.
Answer: The monomers of bakelite are formaldehyde and phenol
Explanation:
The electrolysis of molten AlCl 3 for 2.50 hr with an electrical current of 15.0 A produces ________ g of aluminum metal.
0.25 L of aqueous solution contains 0.025g of HCLO4 (strong acid) what will be the Ph of the solution g
Answer:
The pH of the solution will be 3
Explanation:
The strength of acids is determined by their ability to dissociate into ions in aqueous solution. A strong acid is any compound capable of completely and irreversibly releasing protons or hydrogen ions, H⁺. That is, an acid is said to be strong if it is fully dissociated into hydrogen ions and anions in solution.
Being pH=- log [H⁺] or pH= - log [H₃O⁺] and being a strong acid, all the HClO₃ dissociates:
HClO₄ + H₂O → H₃O⁺ + ClO₄-
So: [HCLO₄]= [H₃O⁺]
The molar concentration is:
[tex]molar concentration=\frac{number of moles of solute}{volume solution}[/tex]
The molar mass of HClO₄ being 100 g / mole, then if 100 grams of the compound are present in 1 mole, 0.025 grams in how many moles are present?
[tex]moles of HClO_{4} =\frac{0.025 grams*1 mole}{100 grams}[/tex]
moles of HClO₄= 0.00025
Then:
[tex][HClO_{4}]=\frac{0.00025 moles}{0.25 L}[/tex]
[tex][HClO_{4}]=0.001 \frac{ moles}{ L}[/tex]
Being [HCLO₄]= [H₃O⁺]:
pH= - log 0.001
pH= 3
The pH of the solution will be 3
What would happen to the measured cell potentials if 30 mL solution was used in each half-cell instead of 25 mL
Answer:
The answer is "[tex]\bold{\log \frac{[0] mole}{[R]mole}}[/tex]"
Explanation:
[tex]E_{cell} =E_{cell}^{\circ} - \frac{0.0591}{n}= \log\frac{[0]}{[R]}\\[/tex]
In the above-given equation, we can see from [tex]E_{ceu}[/tex], of both oxidant [tex]conc^n[/tex]as well as the reactant were connected. however, weight decreases oxidant and reduction component concentration only with volume and the both of the half cells by the very same factor and each other suspend
[tex]\to \log \frac{\frac{\text{oxidating moles}}{25 \ ml}}{\frac{\text{moles of reduction}}{25 ml}} \ \ = \ \ \log \frac{\frac{\text{oxidating moles}}{30 \ ml}}{\frac{\text{moles of reduction}}{30 ml}} \\\\\\[/tex]
[tex]\to {\log \frac{[0] mole}{[R]mole}}[/tex]
The cell potential of the electrochemical reaction has been the same when the volume has been reduced from 30 mL to 25 mL in each half cells.
The cell potential has been given as the difference in the potential of the two half cells in the electrochemical reaction.
The two cells has been set with the concentration of solutions in the oxidation and reduction half cells.
Cell potential changeThe cell potential has been changed when there has been a change in the potential of the half cells.
The volume of 30 mL to the solution has been, resulting in the cell potential difference of x.
With the volume of 25 mL, there has been the difference in the potential being similar to the 30 mL solution, i.e. x.
Thus, the cell potential of the electrochemical reaction has been the same when the volume has been reduced from 30 mL to 25 mL in each half cells.
Learn more about cell potential, here:
https://brainly.com/question/1313684
the ka of hypochlorous acid (hclo) is 3.0 x10^-8 at 25.0°C. What is the % of ionization of hypochlorous
Answer:
0.14%
Explanation:
The computation of % is shown below:
As we know that
HClO <=> H+ + ClO-
I 0.015 0 0
C -a +a +a
E 0.015-a a a
Now
[tex]Ka = \frac{[H+][ClO-]}{[HClO]}[/tex]
[tex]= \frac{a^{2}}{(0.015 - a)} \\\\= 3.0 \times 10^{-8}[/tex]
[tex]a^{2} + 3.0 \times 10^{-8}a - 4.5 \times 10^{-10} = 0[/tex]
Now Solves the quadratic equation i.e.
[tex]a = 2.120 \times 10^{-5}[/tex]
[tex][H+] = a = 2.120 \times 10^{-5} M[/tex]
So,
% ionization is
[tex]= \frac{[H+]}{[HClO]}_{initial} \times 100\%\\\\= 2.120 \times 10^{-5}\div0.015 \times 100\%[/tex]
= 0.14%
Hence, the percentage of hypochlorous ionization is 0.14%
Two elements represents by the letter Q and R atomic number 9 and 12 respectively. Write the electronic configuration of R
Answer:
Atomic no = 12 = Mg
Explanation:
It is given that,
The atomic number of two elements that are represented by letter Q and R are 9 and 12.
We need to write the electronic configuration of R. Atomic number shows the number of protons in atom.
For R, atomic number = 12
Its electronic configuration is : 2,8,2
It has two valance electrons in its outermost shell. The element is Magnesium (Mg).
In which of the following compounds does the carbonyl stretch in the IR spectrum occur at the lowest wavenumber?
a. Cyclohexanone
b. Ethyl Acetate
c. λ- butyrolactone
d. Pentanamide
e. Propanoyl Chloride
Answer:
a. Cyclohexanone
Explanation:
The principle of IR technique is based on the vibration of the bonds by using the energy that is in this region of the electromagnetic spectrum. For each bond, there is a specific energy that generates a specific vibration. In this case, you want to study the vibration that is given in the carbonyl group C=O. Which is located around 1700 cm-1.
Now, we must remember that the lower the wavenumber we will have less energy. So, what we should look for in these molecules, is a carbonyl group in which less energy is needed to vibrate since we look for the molecule with a smaller wavenumber.
If we look at the structure of all the molecules we will find that in the last three we have heteroatoms (atoms different to carbon I hydrogen) on the right side of the carbonyl group. These atoms allow the production of resonance structures which makes the molecule more stable. If the molecule is more stable we will need more energy to make it vibrate and therefore greater wavenumbers.
The molecule that fulfills this condition is the cyclohexanone.
See figure 1
I hope it helps!
A piece of plastic sinks in oil but floats in water. Place these three substances in order from lowest density to greatest density.
Answer:
[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]
Explanation:
Hello,
In this case, since water and oil are immiscible due to the oil's nonpolarity and water's polarity, when mixed, the oil remains on the water since it is less dense than water. In such a way, for a plastic sunk in the oil and floating on the water (in middle of them) we can conclude that the plastic have a mid density, therefore, the required organization is:
[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]
Best regards.
How many moles of bromine will react with 0.0500 mole of C 2H 2 in the reaction C 2H 4 + Br 2 → C 2H 4Br 2?
Answer:
0.05 mole of Br2.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
C2H4 + Br2 —› C2H4Br2
From the balanced equation above,
1 mole of C2H4 reacted with 1 mole of Br2 to produce 1 mole of C2H4 Br2.
Finally, we shall determine the number of moles bromine that will react with 0.05 mole of C2H2.
The number of mole of Br2 needed for the reaction can be obtained as follow:
From the balanced equation above,
1 mole of C2H4 reacted with 1 mole of Br2.
Therefore, 0.05 mole of C2H4 will also react with 0.05 mole of Br2.
Therefore, 0.05 mole of Br2 is needed for the reaction.
Rectangular cube 3.2 m length 1.2 m in height and 5 m in length is split into two parts. The container has a movable airtight divider that divides its length as necessary. Part A has 58 moles of gas and part B has 165 moles of a gas.
Required:
At what length will the divider to equilibrium?
Answer:
The length the divider is to equilibrium from Part A = 1.30 m and from Part B = 3.70 m
Explanation:
Given that:
A rectangular cube with 3.2 m breadth, 1.2 m height and 5 m in length is splitted into two parts.
The diagrammatic expression for the above statement can be found in the attached diagram below.
The container has a movable airtight divider that divides its length as necessary.
Part A has 58 moles of gas
Part B has 165 moles of a gas.
Thus, the movable airtight divider will stop at a length where the pressure on it is equal on both sides.
i.e
[tex]\mathtt{P = P_A = P_B}[/tex]
Using the ideal gas equation,
PV = nRT
where, P,R,and T are constant.
Then :
[tex]\mathsf{\dfrac{V_A}{n_A}= \dfrac{V_B}{n_B}}[/tex]
[tex]\mathsf{\dfrac{L_A \times B \times H}{n_A}= \dfrac{L_B \times B \times H}{n_B}}[/tex] --- (1)
since Volume of a cube = L × B × H
From the question; the L = 5m
i,e
[tex]\mathsf{L_A +L_B}[/tex] = 5
[tex]\mathsf{L_A = 5 - L_B}[/tex]
From equation (1) , we divide both sides by (B × H)
Then :
[tex]\mathsf{\dfrac{L_A }{n_A}= \dfrac{L_B }{n_B}}[/tex]
[tex]\mathsf{\dfrac{5-L_B}{58}= \dfrac{L_B }{165}}[/tex]
By cross multiplying; we have:
165 ( 5 - [tex]\mathsf{L_B}[/tex] ) = 58 (
825 - 165[tex]\mathsf{L_B}[/tex] = 58
825 = 165[tex]\mathsf{L_B}[/tex] +58
825 = 223[tex]\mathsf{L_B}[/tex]
[tex]\mathsf{L_B}[/tex] = 825/223
[tex]\mathsf{L_B}[/tex] = 3.70 m
[tex]\mathsf{L_A = 5 - L_B}[/tex]
[tex]\mathsf{L_A = 5 - 3.70}[/tex]
[tex]\mathsf{ L_A}[/tex] = 1.30 m
The length the divider is to equilibrium from Part A = 1.30 m and from Part B = 3.70 m
What's the mass in grams of 0.442 moles of calcium bromide, CaBr2? The atomic
weight of Ca is 40.1 and the atomic weight of Br is 79.9.
A) 452.3 g
B) 53.04 g
C) 44.2 g
D) 88.4 g
Answer:
Below
Explanation:
Let n be the quantity of matter in the Calcium Bromide
● n = m/ M
M is the atomic weight and m is the mass
M of CaBr2 is the sum of the atomic wieght of its components (2 Bromes atoms and 1 calcium atom)
M = 40.1 + 2×79.9
● 0.422 = m/ (40.1+2×79.9)
●0.422 = m/ 199.9
● m = 0.422 × 199.9
● m = 84.35 g wich is 88.4 g approximatively
88.4 g approximatively is the mass in grams of 0.442 moles of calcium bromide, CaBr2 ,therefore option (d) is correct.
What do you mean by mass ?Mass is the amount of matter that a body possesses. Mass is usually measured in grams (g) or kilograms (kg) .
To calculate mass in grams of 0.442 moles of calcium bromide, CaBr2,
Let n be the quantity of matter in the Calcium Bromide
M is the atomic weight and m is the mass
n = m/ MM of CaBr2 is the sum of the atomic weight of its components
Mass of Ca = 40.1 , Mass of Br = 79.9
M = 40.1 + 2×79.9
0.422 = m/ (40.1+2×79.9)
0.422 = m/ 199.9
m = 0.422 × 199.9
m = 84.35 g which is 88.4 g approximatively .
Thus ,88.4 g approximatively is the mass in grams of 0.442 moles of calcium bromide, CaBr2 , hence option (d) is correct .
Learn more about mass ,here:
https://brainly.com/question/6240825
#SPJ2
a jogger runs a mile in 8.92 minutes. 1 mi=1609m; calculate her speed in km/hr
Answer:
[tex]Speed = 3.30 \frac{km}{hr}[/tex]
Explanation:
Given
Distance = 1 mile
Time = 8.92 minutes
Required
Calculate Speed in km/hr
Speed is calculated as thus;
[tex]Speed = \frac{Distance}{Time}[/tex]
Substitute 1 mile for distance and 8.92 minutes for time
[tex]Speed = \frac{1\ mile}{8.92\ minutes}[/tex]
Convert Miles to Kilometres
If
[tex]1\ mile = 1609\ m[/tex];
Then
[tex]1\ mile = \frac{1609\ km}{1000}[/tex]
[tex]1\ mile = 1.609\ km[/tex] --- (1)
Convert minutes to hour
[tex]1\ minutes = 0.0167\ hour[/tex]
Multiply both sides by 8.92
[tex]8.92 * 1\ minutes = 0.0167\ hour * 8.92[/tex]
[tex]8.92 \ minutes = 0.148964\ hour[/tex] ---- (2)
By substituting (1) and (2) in [tex]Speed = \frac{1\ mile}{8.92\ minutes}[/tex], we have
[tex]Speed = \frac{1.609\ km}{0.48694\ hour}[/tex]
[tex]Speed = 3.304309 \frac{km}{hr}[/tex]
[tex]Speed = 3.30 \frac{km}{hr}[/tex] -- Approximated
What compound is formed when methyloxirane (1,2-epoxypropane) is reacted with ethylmagnesium bromide followed by treatment with aqueous acid
Answer:
Pentan-2-ol
Explanation:
On this reaction, we have a Grignard reagent (ethylmagnesium bromide), therefore we will have the production of a carbanion (step 1). Then this carbanion can attack the least substituted carbon in the epoxide in this case carbon 1 (step 2). In this step, the epoxide is open and a negative charge is generated in the oxygen. The next step, is the treatment with aqueous acid, when we add acid the hydronium ion ([tex]H^+[/tex]) would be produced, so in the reaction mechanism, we can put the hydronium ion. This ion would be attacked by the negative charge produced in the second step to produce the final molecule: "Pentan-2-ol".
See figure 1
I hope it helps!
A buffer is prepared such that [H2PO4-] = 0.095M and [HPO42-] = 0.125M? What is the pH of this buffer solution? (pKa = 7.21 for H2PO4-)
Answer:
pH of the buffer is 7.33
Explanation:
The mixture of the ions H₂PO₄⁻ and HPO₄²⁻ produce a buffer (The mixture of a weak acid, H₂PO₄⁻, with its conjugate base, HPO₄²⁻).
To find pH of a buffer we use H-H equation:
pH = pka + log [A⁻] / [HA]
Where A⁻ is conjugate base and HA weak acid.
For the H₂PO₄⁻ and HPO₄²⁻ buffer:
pH = pka + log [HPO₄²⁻] / [H₂PO₄⁻]
Computing values of the problem:
pH =7.21 + log [0.125M] / [0.095M]
pH = 7.33
pH of the buffer is 7.33
NEED HELP ASAP
In 1988, three gray whales were trapped in Arctic ice. Television crews captured the frantic
attempts of hundreds of people to save the whales. Eventually, a Soviet icebreaker and U.S.
National Guard helicopters arrived to help free the whales. The cost of the rescue mission
exceeded $5 million.
i. Write a scientific question related to the whale story. (1 point)
