Answer:
jeez thats some calculus stuff right there im pretty sure its b
Explanation:
0.450 moles of K2SO4 are dissolved in 195.0 mL of water. Calculate the molarity of the solution.
Answer:
2.31M
Explanation:
The following data were obtained from the question:
Mole of K2SO4 = 0.450 mole
Volume of water = 195.0 mL = 195/1000 = 0.195L
Molarity =...?
Molarity is defined as the mole of solute per unit litre of the solution. This can be expressed as:
Molarity = mole /Volume
With the above formula we can calculate the molarity of the K2SO4 solution as follow:
Molarity = mole /Volume
Molarity = 0.450/0.195
Molarity = 2.31M
As the kinetic energy of particles of matter increase, the distance between the particles?
How does the pressure of a container change as the volume is changed?
Answer: If the volume is decreased, the pressure would increase because the gas molecules have less space to move around. Same goes for the opposite; if the volume increased, the pressure would decrease because the molecules have more space to move and aren't packed as tightly .
Hope this helps!!!
The mole concept will most likely be used in
calculating the average height of a mountain range.
measuring how many liters of gasoline are poured into a tank.
determining how many ozone molecules are lost in the atmosphere.
finding the mass of a piece of steak in a butcher shop.
Answer:
determining how many ozone molecules are lost in the atmosphere
Pls Mark as Brainliest!!! if this helps...
The mole concept The mole concept can be used to determine the number of ozone molecules are lost in the atmosphere.
The mole concept was introduced by Avogadro. The mole is the SI unit of amount of substance. According to Avogadro, one mole of a substance contains 6.02 × 10^23 atoms, ions, molecules etc.
The mole concept is important in many chemical calculations. The mole concept can be used to determine the number of ozone molecules are lost in the atmosphere. (option C)
Learn more: https://brainly.com/question/7287712
I need the correct answer
Answer:
d.
Explanation:
They can be spread through contaminated surfaces.
Answer:
d
Explanation: pathogens csnnot be spread be sontaminated surfesec
Describe the interactions with the Sun, Earth and Moon system that result in Lunar Cycle / Phases.
Answer: The tides are another interaction in the sun-earth-moon system. The tides happen because the moon and sun pull on the oceans, causing them to rise and fall each day. The moon has a bigger effect than the sun because it is closer. The angle of the sun as the earth orbits over the course of a year causes the seasons.
Explanation:
1. What are the trends for atomic size across a period and down a group for the
main group elements?
2. Draw the following Lewis structures:
a) ammonium ion b) sulfur trioxide c) hydrogen cyanide
3. Using formal charge formula (or electronegativity differences), to determine
the following the best structure, OCS, COS or CSO.
Answer:
Here's what I get
Explanation:
1. Trends in atomic size
Atomic size tends to decrease from left to right across the Periodic Table.
You are adding one electron at a time. the electrons repel each other, so the size should increase.
You are also adding a proton to the nucleus. The additional attraction should pull the electrons closer to the nucleus.
The nuclear pull wins, so the atoms get smaller from left to right
Atomic size increases from top to bottom of a Group.
You are adding electrons to an extra shell, so the size should increase.
You are also adding protons to the nucleus, so the size should decrease.
The size of the outer shell wins, so the atomic size increases going down a Group.
2. Lewis structures
(a) Ammonium ion
N is the central atom. The N atom has the positive charge.
(b) Sulfur trioxide
S is the central atom, with a double bond to each of the three O atoms.
(c) Hydrogen cyanide
C is the central atom, with a triple bond to the N atom.
3. COS
The best structure is that of O=C=S. It has no formal charges.
The Lewis structures for the other arrangements have formal charges.
The correct answers of this question is given below.
1. The atomic size increases going down a Group.2. (a) Ammonium ion : The N atom has the positive charge. (b) Sulfur trioxide : Having double bond to each of the three O atoms. (c) hydrogen cyanide : Having a triple bond to the N atom.3. COS and it has no formal charges What is Periodic table?A table in which the chemical elements are arranged in order of increasing atomic number.A periodic table has 118 known elements The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number.What is the explanation for this answers?1. Trends in atomic size : Atomic size tends to decrease from left to right across the Periodic Table.You are adding one electron at a time. the electrons repel each other, so the size should increase.You are also adding a proton to the nucleus. The additional attraction should pull the electrons closer to the nucleus.The nuclear pull wins, so the atoms get smaller from left to right.Atomic size increases from top to bottom of a Group.Adding electrons to an extra shell, so the size should increaseAdding protons to the nucleus, so the size should decrease.The size of the outer shell wins, so the atomic size increases going down a Group.2. Lewis structures :
(a) Ammonium ion : N is the central atom. The N atom has the positive charge. (b) Sulfur trioxides : S is the central atom, with a double bond to each of the three O atoms.(c) Hydrogen cyanide: C is the central atom, with a triple bond to the N atom3. COS
The best structure is that of O=C=S. It has no formal charges.The Lewis structures for the other arrangements have formal charges.Learn more about atomic size below,
https://brainly.com/question/25003370
#SPJ2
Inside the retina of our eyes are receptors called rods and cones. Rods measure the brightness we see and cones determine _____.
A) the color we see
B) the white we see
C) the dimness we see
D) the loudness we hear
What type of bond is formed during dehydration synthesis?
O A
carbon bonds between amino acids
B.
carbon bonds between carbohydrates
C. hydrogen bonds between lipids
O D. peptide bonds between amino acids
A carbon bond between the amino acids is formed in a dehydration reaction. So the correct option is A.
What is a dehydration reaction?
A reaction where two smaller molecules are combined in a chemical manner by the removal of an element from each of these molecules is called a dehydration reaction. Organic compounds are classified on the basis of structure. They are classified as aliphatic and aromatic compounds. Different kinds of chemical reactions are involved in the formation of new compounds when there is a change in bonding between the atoms.
There are some chemical reactions that form a molecule and some only show a displacement or substitution of atoms. There are synthesis or combination reactions that involve a combination of two substances to form one molecule.
On the other hand, there are decomposition reactions in which one substance decomposes to form more than one substance. There are displacement reactions which can be single or double displacement. They involve the displacement of one or more components of compounds among each other. Addition, substitution, rearrangement, elimination, and oxidation-reduction reactions are some of the common organic reactions.
Therefore, the correct option is A.
Read more about chemical reactions, here
https://brainly.com/question/3461108
#SPJ2
A 350. mL air sample collected at 35 degrees C has a pressure of 556 mm Hg.
What pressure will the air exert if it is allowed to expand to 425 mL at 57 degrees
C? Show your work in the space below.
Answer:
485 torr
Explanation:
Explanation:
We can solve this equation using the combined gas law:
P1V1/T1=P2V2/T2
Remember, always use the absolute (Kelvin) temperature when working with gas equations.
The temperature conversions are
T1=C+273=35o+273=308K
T2=57C+273=330K
Since we're trying to find the final pressure, let's rearrange this equation to solve for
P2:
P2=P1V1T2/T1V2
Our known values:
P1= 550 torr
V1=350mL
T1=308K
V2=425"mL
T2=330K
Let's plug these into the equation to find the final pressure:
The final pressure after it is subjected to these changes is thus 485torr
a put question in screen shot
Answer:maybe 2
Explanation:
Answer:
2
Explanation:
Which of the following is a chemical property of liquid water?
Its density is 1.00 g/cm3.
It reacts with sodium metal to form sodium hydroxide and hydrogen gas
It flows.
It freezes to form ice.
It boils at 100°C.
Answer:
B) it reacts with sodium metal to form sodium hydroxide and hydrogen gas
Explanation:
B is the only option that show a chemical property, density, freezing, and boiling points are physical properties.
In the reaction N2 + 3H2 - 2NH3, how many
grams of H, are needed to produce exactly I mole
of ammonia?
A. lg
B. 2g
C.3g
D.4g
Answer:
B. 2g
Explanation:
So first you have to find the mole to mole ratio then convert it to grams if that makes sense. So the mole to mole ratio is 2 ammonia to 3 hydrogen gas. So then after you do that conversion you can solve for grams then. Sorry I am not that great at explaining.
If a buffer has an initial pH of 6.34 and the acid has a Ka of 3.46 × 10-4, what is the ratio of conjugate base to weak acid in the buffer system?
Answer: The ratio of conjugate base to weak acid in the buffer system is 758 : 1
Explanation:
The dissociation constant for acid = [tex]K_a=3.46\times 10^{-4}[/tex]
pH = 6.34
First we have to calculate the value of [tex]pK_a[/tex].
The expression used for the calculation of [tex]pK_a[/tex] is,
[tex]pK_a=-\log (K_a)[/tex]
Now put the value of [tex]K_a[/tex] in this expression, we get:
[tex]pK_a=-\log (3.46\times 10^{-4})[/tex]
[tex]pK_a=3.46[/tex]
Now we have to calculate the ratio of conjugate base to weak acid in the buffer system
Using Henderson Hesselbach equation :
[tex]pH=pK_a+\log \frac{[\text {conjugate base}]}{[Acid]}[/tex]
Now put all the given values in this expression, we get:
[tex]6.34=3.46+\log \frac{[\text {conjugate base}]}{[Acid]}[/tex]
[tex]\frac{[\text {conjugate base}]}{[Acid]}=758[/tex]
Therefore, the ratio of conjugate base to weak acid in the buffer system is 758: 1
Answer:
A. 1:0.46
Explanation:
I took the test
11. Calculate the energy required to produce 12.00 mol of CI207 on the basis of the
following balanced equation.
2012(g) + 702(g) + 130 kcal yields 201207(9)
Answer: 780 kcal are required to produce 12.00 mol of [tex]Cl_2O_7[/tex]
Explanation:
Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and written along with reactants.
The balanced chemical reaction is:
[tex]2Cl_2(g)+7O_2(g)+130kcal\rightarrow 2Cl_2O_7(g)[/tex]
According to stoichiometry :
2 moles of [tex]Cl_2O_7[/tex] are produced by absorption of energy = 130 kcal
Thus 12.00 moles of [tex]Cl_2O_7[/tex] are produced by absorption of energy = [tex]\frac{130}{2}\times 12.00=780kcal[/tex]
Thus 780 kcal are required to produce 12.00 mol of [tex]Cl_2O_7[/tex]
Explain the different principles that allow roller coasters to rip and roar around the tracks. In your response, include how energy is transferred back and forth between kinetic and potential.
Answer:
In the roller coasters the potential energy that is given is the gravitational potential energy, which this energy increases its value as the object moves away from the earth, that is to say, the more height the roller coaster acquires the more gravitational potential energy it will have, and Said train where people usually get on the roller coaster will descend or descend with greater acceleration.
This gravitational potential energy once the mountain begins to descend or descend is converted into kinetic energy
Explanation:
This that we wrote above is considering that the roller coaster does not have curved routes but rectilinear, in the case that it had curved routes, a force would be added in addition to those written that is the centripetal force, it is the same force that appears in the centrifuges or dryers of clothes or the same washing machine. This force, the centripetal force is the force that draws a moving object, in a curvilinear path, towards the center of the curvature.
If is known how deep the water table in an area is, it is known how deep to dig to reach
Pores
The unsaturated zone
Solid rock
Groundwater
Answer:
grond water
Explanation:
what two factors does elastic potential energy depend upon
Answer: Spring constant k as well as the distance stretched
Explanation:
Elastic potential energy is Potential energy stored as a result of deformation of an elastic object, such as the stretching of a spring. It is equal to the work done to stretch the spring, which depends upon the spring constant k as well as the distance stretched.
Blast furnaces extra pure iron from the Iron(IIl)oxide in iron ore in a two step sequence. In the first step, carbon and oxygen react to form carbon monoxide:
2C(s)+O2(g) arrow 2CO(g)
In the second step, iron(lll) oxide and carbon monoxide react to form Iron and carbon dioxide:
Fe203(s) + 3CO(g) arrow 2Fe(s)+ 3CO2(g)
Suppose the yield of the first step is 71.% and the yield of the second step is 72.%. Calculate the mass of oxygen required to make 7.0 kg of iron.
Be sure your answer has a unit symbol, if needed, and is rounded to 2 significant digits.
Answer:
5.9 kg
Explanation:
We must work backwards from the second step to work out the mass of oxygen.
1. Second step
Mᵣ: 55.84
Fe₂O₃ + 3CO ⟶ 2Fe + 3CO₂
m/kg: 7.0
(a) Moles of Fe
[tex]\text{Moles of FeO} = \text{7000 g Fe} \times \dfrac{\text{1 mol Fe}}{\text{55.84 g Fe}} = \text{125 mol Fe}[/tex]
(b) Moles of CO
[tex]\text{Moles of CO} = \text{125 mol Fe} \times \dfrac{\text{3 mol CO}}{\text{2 mol Fe}} = \text{188 mol CO}[/tex]
However, this is the theoretical yield.
The actual yield is 72. %.
We need more CO and Fe₂O₃ to get the theoretical yield of Fe.
(c) Percent yield
[tex]\begin{array}{rcl}\text{Percent yield} &=& \dfrac{\text{ actual yield}}{\text{ theoretical yield}} \times 100 \, \%\\\\ 72. \, \% & = & \dfrac{\text{188 mol}}{\text{actual yield}} \times 100 \,\%\\\\0.72 &= &\dfrac{\text{188 mol}}{\text{actual yield}}\\\\\text{Actual yield} & = & \dfrac{\text{188 mol}}{0.72}\\& = & \textbf{261 mol}\\\\\end{array}[/tex]
We must use 261 mol of CO to get 7.0 kg of Fe.
2. First step
Mᵣ: 32.00
2C + O₂ ⟶ 2CO
n/mol: 261
(a) Moles of O₂
[tex]\text{Moles of O}_{2} = \text{261 mol CO} \times \dfrac{\text{1 mol O}_{2}}{\text{2 mol CO}} = \text{131 mol O}_{2}[/tex]
(b) Mass of O₂
[tex]\text{Mass of O}_{2}= \text{131 mol O }_{2} \times \dfrac{\text{32.00 g O}_{2}}{\text{1 mol O}_{2}} = \text{4180 g O}_{2}[/tex]
However, this is the theoretical yield.
The actual yield is 71. %.
We need more C and O₂ to get the theoretical yield of CO.
(c) Percent yield
[tex]\begin{array}{rcl}71. \, \% & = & \dfrac{\text{188 mol}}{\text{actual yield}} \times 100 \,\%\\\\0.71 &= &\dfrac{\text{4180 g}}{\text{actual yield}}\\\\\text{Actual yield} & = & \dfrac{\text{4180 g}}{0.71}\\\\& = & \text{5900 g}\\& = & \textbf{5.9 kg}\\\end{array}[/tex]
We need 5.9 kg of O₂ to produce 7.0 kg of Fe.
If the mole fraction of sulfuric acid H2SO4 is 0.432 what is the percent by mass of H2SO4.
Answer:
19.47%
Explanation:
The percentage by mass of [tex]H_2SO_4[/tex] would be 19.47%.
The percentage by mass of a substance in solution is calculated as:
[tex]\frac{mass of substance}{mass of substance + water} * 100%[/tex]
Given that the mole fraction of [tex]H_2SO_4[/tex] = 0.432
The total number of mole fraction of a solution = 1
Hence, mole fraction of water = 1 - 0.432 = 0.568
Mass of water = molar mass x mole
= 98.079 x 0.432 = 42.37 g
Mass of [tex]H_2SO_4[/tex] = molar mass x mole
= 18.02 x 0.568 = 10.24 g
Hence,
%mass of [tex]H_2SO_4[/tex] = [tex]\frac{10.24}{10.24 + 42.37} * 100[/tex]
= 19.47%
A student observes the chemical process described by this equation:
4Al + 3O2 → 2Al2O3
How does the mass of the new substance compare to the total mass of the starting materials?
Answer:
Both are equal
Explanation:
Mass of starting material i.e Aluminium is [tex]4.480 * 10^{-23}[/tex] grams
The weight of oxygen is [tex]2.65 * 10^{-23}[/tex]
There are 4 atoms of aluminium and 3 atoms of oxygen
Thus, the total mass of starting material is
[tex]4 *[/tex] mass of one atom of aluminium [tex]+ 6 *[/tex] mass of one atom of oxygen
[tex]4 * 4.480 * 10^{-23} + 6* 2.65 * 10^{-23}[/tex]
[tex]35.1 * 10^{-23}[/tex] grams
Mass of new substance is also equal to
[tex]4 *[/tex] mass of one atom of aluminium [tex]+ 6 *[/tex] mass of one atom of oxygen
[tex]4 * 4.480 * 10^{-23} + 6* 2.65 * 10^{-23}[/tex]
[tex]35.1 * 10^{-23}[/tex] grams
How does activation energy affect the progress of a reaction?
O A. The reaction will not occur unless the activation energy is met.
B. The activation energy decreases the energy needed for a reaction
to progress.
C. The activation energy increases how quickly the reaction will
progress.
D. The activation energy determines equilibrium concentrations of
products.
Answer:
The reaction will not occur unless the activation energy is met.
Explanation
Answer:
A. The reaction will not occur unless the activation energy is met.
Explanation:
a.p.e.x
Body systems such as the nervous and digestive systems work together and help the body
maintain homeostasis. Which of the following correctly describes one way that the nervous
system and the digestive system work together?
Lungs contract during chewing so that food won't be inhaled.
Blood flow to the stomach and intestines decreases during eating.
The involuntary muscles in the jaw stimulate spinal cord neurons to initiate chewing.
Neurons in the brain stimulate smooth muscles in the intestines to move food through the body.
Frosted glass and wax paper are ____.
A) transparent
B) translucent
C) clear
D) opaque
Answer:
B) translucent
Explanation:
Light only partially passes through them.
Do metals or nonmetals have the greatest tendency to lose electrons and become positive ions?
Answer:
The metals have the tedency to lose electrons and become positive ions
Explanation:
In order to attain noble gases electronic configuration, metals of group I A lose one electron and II A lose 2 electrons with ionization energy.
Which statements correctly describe the rock cycle? Check all that apply.
Rocks are preserved through the process.
Rocks change from one type to another.
Different rock groups are interrelated.
Rocks change from one type to another in a specific order.
Environmental conditions influence a change in rock type.
Answer: I italicize for checking
Rocks are preserved through the process.Rocks change from one type to another.Different rock groups are interrelated.Rocks change from one type to another in a specific order.Environmental conditions influence a change in rock type.
Explanation:
Rocks are preserved, as in you can't destroy them completely, but no, they don't stay the same they change.
Which of the following is a chemical reaction?
1- Dropping a sliced orange into a vat of Sodium Dydroxide
2-Cutting a piece of paper into two pieces
3-Filling a balloon with air
4-Freezing liquid Mercury
Answer:
1- Dropping a sliced orange into a vat of Sodium Dydroxide
Explanation:
The other answers (2-4) are only physical changes that don't change any chemical compositions.
What are all of the possible products of the electrolysis of Sodium Chloride in aqueous solution of water when the electrodes are made of copper?
A photo has been provided to show what is happening
Answer:
HDHERFEHFFFHRF
Explanation:
Compare and contrast the dynamics of energy transfer between the Eocene Period and the Cryogenian Period. In which period would you say that Earth's system is experiencing a net gain in energy and in which period would you say that Earth's system is experiencing a net loss in energy
Answer:
The Eocene Period is experiencing net gain in energy while Cryogenian Period is experiencing a net loss in energy.
Explanation:
In Eocene Period, the population of mammals such as horses , whales and bats etc were high due to the presence of high amount of food and good atmospheric condition such as high temperature while the population of animals were low in Cryogenian Period due to the presence of very low temperature which experiencing loss of energy. Most of area of the earth consist of icy desert.
EMERGENCY: I WILL FAIL: PLS HELP WILL MARK BRAINLIEST JUST PLS HELP
Answer:
condensation: moisture builds up on window; dew forms on blades of grass
deposition: snow is made inside a cloud; frst froms on window?
Explanation:
