HELPPPPPPPPPPPPMEEEEEEEEEE
Answer:
25%
Explanation:
Cystic fibrosis is a recessive allele, meaning that the child must be aa to suffer the symptoms. Only 1/4 of the paired alleles is aa, so the probability of getting cystic fibrosis would be 25%.
How much water, in grams, can be made from
2.44 × 10^24 hydrogen molecules?
Answer in units of g.
Answer:
[tex]m_{H_2O}=73.0gH_2O[/tex]
Explanation:
Hello there!
In this case, since the formation of water from hydrogen and oxygen is:
[tex]2H_2+O_2\rightarrow 2H_2O[/tex]
Whereas we find a 2:2 mole ratio of hydrogen to water. In such a way, by using the Avogadro's number, the aforementioned mole ratio and the molar mass of water (18.02 g/mol), we obtain the following grams of water product:
[tex]m_{H_2O}=2.44x10^{24}molec*\frac{1molH_2}{6.022x10^{23}molec}*\frac{2molH_2O}{2molH_2}*\frac{18.02gH_2O}{1molH_2O}\\\\ m_{H_2O}=73.0gH_2O[/tex]
Regards!
Choose the substance with the highest viscosity. Choose the substance with the highest viscosity. CF4 C7H16 C2H4I2 HOCH2CH2CH2CH2OH (CH3CH2)2CO
Answer:
C2H4I2
Explanation:
Viscosity of a fluid has to do with the internal friction between the internal layers of the fluid.
Molecular weight is found to be related to the viscosity of a fluid even though the relationship may not be strictly linear.
However, the greater the molecular weight of a substance, the greater the viscosity of the material.
Since C2H4I2 has the greatest molecular weight (281.86 g/mol), it is also expected to display the greatest viscosity among all the compounds listed in the question.
Doc. No.
QMS
Rev. Date
1. In the reaction
P
> M + N
a) The reactants are:
b) The products are:
Answer: In the reaction:
a) The reactants are: P
b) The products are: M and N
Explanation:
The given reaction equation is as follows.
[tex]P \rightarrow M + N[/tex]
Reactants are the species present on the left side on an arrow in a chemical reaction equation.
On the other hand, products are the species which are present on the right side of an arrow in a chemical reaction equation.
Hence, in the given reaction equation P is the reactant. Whereas M and N are the products.
Thus, we can conclude that in the reaction:
a) The reactants are: P
b) The products are: M and N
Kristy finds the mass of an object to be 20 grams and the volume to be 10 mL. What is the density of the object? (don't send me links, just give a straight answer)
Copper metal has a specific heat of 0.385 J/g.C. calculate the amount of heat required to raise the temperature of 22.8g of copper metal from 20.0C to 875°C
Answer:
7505.19 J
Explanation:
We'll begin by calculating the change in the temperature of copper. This can be obtained as follow:
Initial temperature (T₁) = 20 °C
Final temperature (T₂) = 875 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 875 – 20
ΔT = 855 °C
Finally, we shall determine the heat required. This can be obtained as follow:
Specific heat capacity (C) = 0.385 J/gºC
Change in temperature (ΔT) = 855 °C
Mass (M) = 22.8 g
Heat (Q) required =?
Q = MCΔT
Q = 22.8 × 0.385 × 855
Q = 7505.19 J
Thus, 7505.19 J of heat energy is required.
True or false? All producers are at the top of the food web
Answer:
false all producers are at the top of food web
I NEED THIS NOW NO LINKS OR ILL REPORT
What is a substance that has multiple elements in one area but are not
chemically combined; such as air? *
atom
element
compound
mixture
The correct answer is mixture
Determine the number of significant digits in each number and list the specific significant digits. 1. 306,000 2. 0.0073 3. 39.9999 4. 25.00 5. 40,000,021 6. 45,250.0 7. 0.00011 8. 420.030700
Answer:
1. 306,000: three significant figures because the last three zeros are not preceded by a decimal point.
2. 0.0073: two significant figures because the the leftmost zeros are not significant.
3. 39.9999: six significant figures because all these numbers are nonzero digits.
4. 25.00: four significant figures because right-handed zeros, after a decimal point, are significant.
5. 40,000,021: eight significant figures because intermediate zeros are significant.
6. 45,250.0: six significant figures because al the zeros are to the right of the nonzero digits.
7. 0.00011: two significant figures as well as #2.
8. 420.030700: nine significant figures because all the zeros are to the right of the first nonzero digits and after the decimal point.
Explanation:
Hello there!
In this case, by considering the given numbers, we can proceed as follows, by keeping in mind the rules for assigning significant figures:
1. 306,000: three significant figures because the last three zeros are not preceded by a decimal point.
2. 0.0073: two significant figures because the the leftmost zeros are not significant.
3. 39.9999: six significant figures because all these numbers are nonzero digits.
4. 25.00: four significant figures because right-handed zeros, after a decimal point, are significant.
5. 40,000,021: eight significant figures because intermediate zeros are significant.
6. 45,250.0: six significant figures because al the zeros are to the right of the nonzero digits.
7. 0.00011: two significant figures as well as #2.
8. 420.030700: nine significant figures because all the zeros are to the right of the first nonzero digits and after the decimal point.
Regards!
Copper sulfate is made of one copper (Cu) atom, one sulfur (S) atom, and four oxygen (O) atoms. Write the chemical formula correctly.
The value of ΔH° for the reaction below is -6535 kJ. ________ kJ of heat are released in the combustion of 16.0 g of C6H6 (l)?
2C6H6 (l) + 15O2 (g) → 12CO2 (g) + 6H2O (l)
Answer:
the value of H° is below -6535 kj. +6H2O
Explanation:
6H2O answer solved
For the given reaction, 2 moles of C₆H₆ the heat energy released is - 6535 KJ. Then, for 16 g of the compound or 0.205 moles needs 669.83 KJ of heat released in combustion.
What is combustion ?Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, typically oxygen, resulting in the release of heat, light, and various combustion products, such as carbon dioxide and water vapor.
The process of combustion involves a rapid and exothermic (heat-releasing) oxidation reaction that produces a flame, which is visible in many cases.
Here, 2 moles of the hydrocarbon releases - 6535 KJ of energy.
molar mass of C₆H₆ = 78 g/mol
then no.of moles in 16 g = 16 /78 = 0.205 moles.
then energy released by 0.205 moles = 0.205 moles × 6535 KJ /2 moles = 669.83 kJ
Therefore, the heat energy released by 16 g of the compound in combustion is 669.83 kJ.
Find more on combustion :
https://brainly.com/question/13153771
#SPJ2
1 gallon =3.785 L how many liters of gasoline will fill a 10.00 tank
Answer:
37.85 L
Explanation:
3.785 x 10.00 = 37.85 L
it would take 37.85 L to fill a 10.00 tank
(sorry if im wrong pls dont report)
(hope this helps can i plz have brainlist :D hehe)
Zinc sulfate is a 2-ion electrolyte,
dissociating 40% in a
certain concentration. Calculate its
dissociation (i) factor.
On the basis of 40% dissociation, 100
particles of zinc sulfate
will yield:
40zinc ions
40 sulfate ions
60undissociated particles
Jo 11:03
Answer: The value of i is 1.4 and 40% dissociation of 100 particles of zinc sulfate will yield 60 undissociated particles.
Explanation:
The equation used to calculate the Vant' Hoff factor in dissociation follows:
[tex]\alpha =\frac{i-1}{n-1}[/tex]
where,
[tex]\alpha [/tex] = degree of dissociation = 40% = 0.40
i = Vant' Hoff factor
n = number of ions dissociated = 2
Putting values in above equation, we get:
[tex]0.40=\frac{i-1}{2-1}\\\\0.40=i-1\\\\i=1.4[/tex]
The equation used to calculate the degee of dissociation follows:
[tex]\alpha =\frac{\text{Number of particles dissociated}}{\text{Total number of particles taken}}[/tex]
Total number of particles taken = 100
Degree of dissociation = 40% = 0.40
Putting values in above equation, we get:
[tex]0.40=\frac{\text{Number of particles dissociated}}{100}\\\\\text{Number of particles dissociated}=(0.40\times 100)=40[/tex]
This means that 40 particles are dissociated and 60 particles remain undissociated in the solution.
Hence, 40% dissociation of 100 particles of zinc sulfate will yield 60 undissociated particles.
28) Which of the following is true about the modern model of the atom?
A) Electrons orbit the nucleus in shells at fixed distances
B) Protons, neutrons, and electrons are located in the nucleus.
C)Atoms are hard, indivisible spheres.
D)A positive nucleus is surrounded by negative electrons.
Answer:
A) Electrons orbit the nucleus in shells at fixed distances
Answer:
the answer is A
Explanation:
What the correct answer
Answer:
[Ar] 4s²3d³
Explanation:
Vanadium has atomic number of 23. The electronic configuration of vanadium can be written as:
V (23) => 1s² 2s²2p⁶ 3s²3p⁶ 4s²3d³
NOTE: After the 18th electron, 4s will be filled before 3d.
We can also write the electronic configuration of an element in its condensed form by writing the symbol of the noble before the desired element in a squared bracket followed by the remaining electrons to complete the electronic configuration of the element.
The electronic configuration of vanadium in its condensed form is given below:
The noble gas before vanadium is Argon (Ar) with atomic number of 18. Thus, the electronic configuration of vanadium becomes:
V (23) => [Ar] 4s²3d³
Describe the three freezing points. Is there a relationship between the amount of solute in the solution and the freezing temperature
Answer:
The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.
Explanation:
An alkyl groyp has a formula of CxH6, determine the value of x
Answer:
i didnt understand
Explanation:
Answer:
x = 2 (C₂H₆)
Explanation:
The general formula for alkanes is CₓH₂ₓ₊₂
2x + 2 = 6
Simply solve for n:
2x = 4
x = 2
Is benzene a solute or solvent
2. Energy cycles through ecosystems because it returns to the sun.
True or false
Please help I will give 50 points
Answer:
false
Explanation:
energy does not return to the sun, it returns to the plants or producers. if energy were to return to the sun, it would have to travel though space.
Identify each of the following as endothermic or exothermic.
a. Water in a pond evaporates.
b. Methane gas burns on a stove top.
c. Water freezes to form ice.
d. Energy flows from the system to the surroundings.
e. Energy flows from the surroundings to the system.
Answer:
Identify each of the following as endothermic or exothermic.
a. Water in a pond evaporates.
b. Methane gas burns on a stovetop.
c. Water freezes to form ice.
d. Energy flows from the system to the surroundings.
e. Energy flows from the surroundings to the system.
Explanation:
An exothermic reaction is the one in which heat energy is released.
An endothermic reaction is one in which heat energy is absorbed.
a. Water in a pond evaporates.
This process absorbs heat energy.
Hence, this is an example of an endothermic process.
b. Methane gas burns on a stovetop and release heat energy and hence this is an example of an exothermic reaction.
c. Water freezes to form ice.
In this process heat energy is released.So this is an example of exothermic reaction.
d. Energy flows from the system to the surroundings.
That means heat energy is released into the surroundings.
So, this is an example of exothermic process.
e. Energy flows from the surroundings to the system.
That means energy is absorbed by the system.
So, it is an endothermic process.
Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coat the metal preventing it from further oxidation. Which of the following is the correct balanced equation for the reaction?
a. Al(s) + 302(g) → 2903(s).
b. 2Al(s) + O2(g) → 2A10(s).
c. AI(s) + O2(g) → AIO (s).
d. 4Al(s) + 3O2(g) →2Al2O3.
e. 3Al(s) + O2 → Al3O2.
Answer:
d. 4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
Explanation:
Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coats the metal preventing it from further oxidation: aluminum oxide. Aluminum is a cation with charge 3+ (Al³⁻) and oxide is an anion with charge 2- (O²⁻). Thus, the neutral compound aluminum oxide has the chemical formula Al₂O₃. The unbalanced chemical equation is:
Al(s) + O₂(g) → Al₂O₃(s)
We can balance using the trial and error method. First, we will balance O atoms by multiplying Al₂O₃ by 2 and O₂ by 3.
Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
Finally, we get the balanced equation by multiplying Al by 4.
4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
Question 8 (5 points)
(08.02 MC)
A 10 M concentrated stock solution of NaCl was used to prepare 5 liters of diluted 1 M solution. Which of the following statements is true about
the
process used to achieve this required dilution? (5 points)
O a
The volume of stock solution used was less than 0.4 liters.
Oь
The volume of stock solution used was more than 5 liters.
Ос
The volume of the solvent used was less than 0.4 liters.
Od
The volume of the solvent used was less than 5 liters.
Answer:
d . The volume of the solvent used was less than 5 liters.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the volume of the stock (initial) solution by using the following equation:
[tex]M_1V_1=M_2V_2[/tex]
Thus, we solve for, V1, which stands for the aforementioned volume of stock solution:
[tex]V_1=\frac{M_2V_2}{M_1}[/tex]
Then, we plug in to obtain:
[tex]V_1=\frac{5L*1M}{10M}\\\\V_1=0.5L[/tex]
Now, since the final volume was 5 L, we can infer that the volume of solvent is 4.5 L and that of the stock solution 0.5 L for a total of 5 L of diluted solution; therefore, the correct reasoning is d . The volume of the solvent used was less than 5 liters.
Regards!
Answer:
The volume of the solvent is less than 5
Explanation:
What element provides strength to the exoskeleton of Clams and oysters
anuvia, the trade name for sitagliptin, was introduced in 2006 for the treatment of type 2 diabetes. In what type of orbital does the lone pair on each N atom reside.
Answer: hello your question is poorly written below is the complete question
answer:
For N1 : sp³ orbital
For N2: p orbital
For N3 : p orbital
For N4 : sp² orbital
For N5 : sp² orbital
Explanation:
Determining the type of orbital in which the lone pair on each N atom will reside.
From the configuration attached below we can determine the type of orbital and they are ;
For N1 : sp³ orbital
For N2: p orbital
For N3 : p orbital
For N4 : sp² orbital
For N5 : sp² orbital
Describe the buffer capacity of the acetic acid buffer solution in relation to the addition of both concentrated and dilute acids and bases. Reference the results in Data Tables 1,2,3, and 4 in your answer.
Answer:
The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.
Explanation:
Buffer capacity is defined as the moles of an acid or base that are needed to change the pH of a buffer in 1 unit.
A more concentrated solution of acetic buffer contains more moles of the acid per liter of solution. A solution that contains more moles of the acetic ion or the acetic acid requires more moles of base or acid to change the pH, that means:
The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.
Calculate the amount of heat required to completely sublime 55.0 g of solid dry ice CO2 at its sublimation temperature. The heat of sublimation for carbon dioxide is 32.3 kj mol
Answer:
40.4 kJ
Explanation:
Step 1: Given data
Mass of CO₂ (m): 55.0 gHeat of sublimation of CO₂ (ΔH°sub): 32.3 kJ/molStep 2: Calculate the moles corresponding to 55.0 g of CO₂
The molar mass of CO₂ is 44.01 g/mol.
n = 55.0 g × 1 mol/44.01 g = 1.25 mol
Step 3: Calculate the heat (Q) required to sublimate 1.25 moles of CO₂
We will use the following expression.
Q = n × ΔH°sub
Q = 1.25 mol × 32.3 kJ/mol = 40.4 kJ
g Suppose you are titrating an acid of unknown concentration with a standardized base. At the beginning of the titration, you read the base titrant volume as 1.84 mL. After running the titration and reaching the endpoint, you read the base titrant volume as 27.30 mL. What volume, in mL, of base was required for the titration?
Answer:
25.46 mL
Explanation:
In a titration we use the volume and concentration of a solution to determine the previously unknown concentration of other solution. Let's consider the titration of an acid of unknown concentration with a standardized base (a base whose concentration we know). The generic neutralization reaction is:
HA + BOH ⇒ BA + H₂O
The base is in the buret and we will add it to the acid until the equivalence point is reached. The volume of base used is equal to the difference between the final reading of the buret and the initial reading of the buret.
V = 27.30 mL - 1.84 mL = 25.46 mL
If you had used toluene instead of methyl benzoate in this reaction, what nitration product(s) would have formed? Write a stepwise mechanism for the nitration reaction of toluene.
Answer:
See explanation
Explanation:
The electrophilic substitution of aromatic compounds occurs faster in substituted aromatic compounds due to the fact that the ring becomes more or less susceptible to electrophilic attack depending on the nature of the substituent in the ring.
Electron pushing substituents such as alkyl groups stabilize the positive charge developed during electrophilic substitution hence they activate the ring towards electrophilic substitution.
The methyl group is an ortho - para directing substituent hence the product obtained by nitration of toluene is o-nitrotoluene and p-nitrotoluene.
The stepwise mechanism for obtaining these products is shown in the image attached to this answer.
The combination of isotopes of hydrogen characterized by emmision of radiation is believed to take place in the
a. sun
b. galaxy
c. moon
d. star
All forms of energy can exist as either ________ or ________ energy.
Answer:
potentiol or kenetic
Explanation:
