Solution :
13. Net income = total assets x ROA
= $ 1,000,000 x 12%
= $ 120,000
Net Income for company is $120,000.
Net Profit margin = 4.25%
Total sales = net income / net profit margin
= $ 120,000 / 4.25%
= $ 2,823,529
Total sales for company is $ 2,823,529
14. Debt ratio = 72%
So weight of debt = 72%
Weight of equity = 1 - 72%
= 28%
Debt equity ratio [tex]$=\frac{72 \%}{28 \%}$[/tex]
= 2.57
Debt equity ratio is 2.57
15. Debt ratio = 42.50%
So, weight of debt = 42.50%
Weight of equity = 1 - 42.50%
= 57.50%
Weight of equity is 57.50%.
Return on equity = 15%.
Return on assets = 57.50% × 15%
= 8.625%
Return on assets is 8.625%.
16.
Debt Equity ratio = 1.45
Weight of debt = 59.18%
Weight of equity = 40.82%
Return on assets = 16%
Return on equity = 16% / 40.82%
= 39.20%
Return on equity is 39.20%.
17.
Total Assets turnover = Sales / Total Assets
= (Net Income / Total Assets) / (Net Income / Sales)
= ROA / Net Profit margin
= 7.50% / 15%
= 0.50
Total Assets turnover is 0.50.
Two alternate plans are available for increasing the capacity of existing water transmission lines between an unlimited source and a reservoir. The unlimited source is at a higher elevation then the reservoir. Plan A calls for the construction of a parallel pipeline and flow by gravity. Plan B specifies construction of a booster pumping station. Estimated cost for the two plans are as follows: Hint: Use Present Worth- (do not guess show all your work) i=10%
Plan A : Cost $700,000, Life 40 Years, Annual Operation and Repair $1,000/Year
Plan B: Cost $200,000, Life 40 Years Structure and 20 years equipment, Equipment replacement at the end of 20 years $75,000, Annual Operation and Repairs 52,000/year
a. Plan A $709,779.00
b. Plan A $740,000
c. Plan B $710,165.50
d. Plan B $326,000
Answer:
plan a
Explanation:
present worth of plan A= 700000+1000(p/a,10%,40)
= 700000+1000*9.779
= 700000+9779
= 709779 dollars
present worth of plan b = 200000+75000(p/f,10%,20)+52000/year(p/a,10%,40)
= 200000+75000*0.1486+52000*9.779
= 719653 dollars.
we compare the pw of both a and b, from the solutions above, the present worth of plan a is smaller than that of plan b, so the best option is plan a, $709,779.00
Preparation of a statement of cash flows involves five steps:
(1) Compute the net increase or decrease in cash;
(2) compute net cash provided or used by operating activities (using either the direct or indirect method);
(3) compute net cash provided or used by investing activities;
(4) compute net cash provided or used by financing activities; and
(5) report the beginning and ending cash balances and prove that the ending cash balance is explained by net cash flows. Noncash investing and financing activities are also disclosed.
Answer:
Preparation of a statement of cash flows involves five steps
1. Compute net cash provided or used by operating activities.
This is the section where all the cash flow that belongs to the operating section are been added and subtracted according to the inflow and outflow of the transaction.
2. Compute net cash provided or used by investing activities.
This is the section where all the cash flow that belongs to the investing section are been added and subtracted according to the inflow and outflow of the transaction.
3. Compute net cash provided or used by financing activities.
This is the section where all the cash flow that belongs to the financing section are been added and subtracted according to the inflow and outflow of the transaction.
4. Compute the net increase or decrease in cash
This is the section where the cash-flow from operating, investing and financing activities is been balanced.
5. Report the beginning and ending cash balances and prove that the ending cash balance is explained by net cash flows.
After the cash-flow from operating, investing and financing activities is been calculated, Then, this section is also computed to derive the Closing/Ending cash balance
Bottum Corporation, a manufacturing Corporation, has provided data concerning its operations for May. The beginning balance in the raw materials account was $22,500 and the ending balance was $41,000. Raw materials purchases during the month totaled $68,000. Manufacturing overhead cost incurred during the month was $113,500, of which $2,500 consisted of raw materials classified as indirect materials. The direct materials cost for May was:
Answer:
the direct material cost is $47,000
Explanation:
The computation of the direct material cost is shown below:
= Opening balance + purchase made - indirect material - closing balance
= $22,500 + $68,000 - $2,500 - $41,000
= $47,000
hence, the direct material cost is $47,000
The same should be considered and relevant too
Aaron and Michele, equal shareholders in Cavalier Corporation, receive $25,000 each in distributions on December 31 of the current year. During the current year, Cavalier sold an appreciated asset for $60,000 (basis of $15,000). Payment for the sale of the asset will be made as follows: 50% next year and 50% in the following year with interest payable at a rate of 6 percent. Before considering the effect of the asset sale, Cavalier's current-year E & P is $40,000 and it has no accumulated E & P.
Required:
How much of Aaron’s distribution will be taxed as a dividend?
Answer:
Cavalier Corporation
Aaron’s distribution that will be taxed as a dividend is:
= $25,000
Explanation:
a) Data and Calculations:
Amount received in distributions by Aaron and Michele each = $25,000
Proceeds from the sale of an appreciated asset = $60,000
Proceeds to be received 50% in the next year = $30,000
Proceeds to be received 50% in the second year = $30,000
Basis of asset = $15,000
Capital gains = $45,000 ($60,000 - $15,000)
Cavalier's current-year E & P = $40,000
Accumulated E & P = $0
Assume declining profits in the market for Internet service force several firms in the area to drop out of the market. All else constant, this would cause the:
Answer:
Equilibrium quantity will decrease and Price will increase.
Explanation:
The decrease in the number of firms will result in a decrease in supply or quantity in the market. As the quantity decreases, the prices tend to increase. Therefore, the drop of firms in the market will decrease the supply and increase the price.
LUVFINANCE, Inc. is estimating its WACC. The firm could sell, at par, $100 preferred stock that pays a 10 percent annual dividend and incurs 6.19% flotation costs. What is the cost of new preferred stock financing
Answer:
$10.66
Explanation:
Calculation to determine the cost of new preferred stock financing
Cost of new preferred stock financing=(100*10%)/(100*(1-0.0619))
Cost of new preferred stock financing=10/(100*(1-0.0619))
Cost of new preferred stock financing=10/(100*0.9381)
Cost of new preferred stock financing=10/93.81
Cost of new preferred stock financing=$10.66
Therefore the cost of new preferred stock financing is $10.66
uppose you invest, every month, in an annuity that pays 3% interest, compounded monthly. After 25 years, you have $550,000. How much money do you earn from interest
Answer: $180,046
Explanation:
First find the annuity that was invested monthly that yielded $550,000.
Interest rate = 3%/12 months = 0.25%
Period = 25 * 12 = 300 months
Future value of annuity = Annuity * ( ( 1 + rate) ^ no. of periods - 1) / rate
550,000 = Annuity * ( ( 1 + 0.25%)³⁰⁰ - 1 ) / 0.25%
550,000 = Annuity * 446
Annuity = 550,000 / 446
Annuity = $1,233.18
Without compounding, investing $1,233.18 per month would have yielded:
= 1,233.18 * 300 months
= $369,954
Money earned from interest is:
= 550,000 - 369,954
= $180,046
Critical Chain Project Management (CCPM) attempts to keep the most highly demanded resource busy on critical chain activities, but not overloaded.
a. True
b. False
Answer:
True
Explanation:
Critical-Chain
This was introduced or originated by Eli Goldratt in 1997. Its aim is to challenges conventional project management approaches and absolute dependence on TOC principles. The idea of what to change or eliminated is the largely rooted behaviors that is common with the traditional project management practices. It is very multitasking anf it is the longest string of reliance that occur on the project.
Critical- Chain Approach
This approach simply covers project network as it ca be limited by both resource and technical reliance/dependencies. each type of limitations can create task reliance.
The Summary of Critical Chain Approach
1.) use Aggressive but Possible Times (ABPT) for task durations
2.) identify the critical chain by accounting for resource dependencies
3.) use buffer management to track project progress etc.
A 22-year old college student has been promised a $1 million check at this 50thbirthday (28years from today). What is the present value of the $1 million today assuming an interest rate of 5%
Answer:
$255,093.64
Explanation:
Calculation to determine the present value of $1 million today
Using Financial calculator
PV = PV (rate, nper, pmt, fv, type)
Where,
FV = $1,000,000
Annual Interest rate = 5%
Number of periods = 28
Let plug in the formula
PV = PV (5%, 28, 0, -1000000, 0)
PV= $255093.64
Therefore the Present value of $1 million today is $255,093.64
Ormand Organic Grocery has invested in a yogurt stand for its store. The investment cost the company $100,000. Variable materials, preparation, and marketing costs are expected to be $1.30 per unit and fixed costs are estimated at $7,400 a year. If actual sales were 21,400 servings, what would the ROI be using the sales price of $2.40
Answer:
15.4%
Explanation:
Calculation to determine what would the ROI be
ROI=[ ( $2.40 - $1.30) * 21,400 - $7,400]/100,000
ROI=($1.1 * 14,000)/100,000
ROI=$15,400/100,000
ROI=0.154*100
ROI=15.4%
Therefore the ROI would be 15.4%
g Taraj is considering changing careers. She has heard about opportunities with supply chain, but is unsure what the industry really is. How would you describe a supply chain?
Answer:
A supply chain refers to a network that involves the production and delivery of goods or services from the manufacturer to the end user (consumer).
Explanation:
Supply chain management can be defined as the effective and efficient management of the flow of goods and services as well as all of the production processes involved in the transformation of raw materials into finished products that meet the insatiable want and need of the consumers. Generally, the supply chain management involves all the activities associated with planning, execution and supply of finished goods and services to the consumers.
The key principle of supply chain management can be best summed up as collaboration between multiple firms. These multiple firms include a company that is saddled with the responsibility of manufacturing, a wholesaler, and a retailer who typically sells the products to the customers or consumers.
Basically, these three (3) firms or individuals are required to collaborate with each other so as to meet the needs of the customers in a timely manner or fashion and at a fair price too.
Generally, the four (4) stages of a supply chain include the following;
I. Supply management.
II. Supply chain management.
III. Supply chain integration.
IV. Demand-supply collaboration.
Richards Corporation uses the FIFO method of process costing. The following information is available for October in it's fabricating department: Units: Beginning inventory: 80,000 units, 60% complete as to materials and 20% complete as to conversion. Units started and completed: 250,000 Units completed and transferred out: 330,000 Ending inventory: 30,000 units, 40% complete as to materials and 10% complete as to conversion Costs: Costs in beginning Work in Process - direct materials: $37,200 Costs in beginning Work in process - conversion: $79,700 Costs incurred in October - Direct materials: $646,800 Costs incurred in October: Conversion: $919,300 Calculate the equivalent units of conversion. A. 250,000 B. 317,000 C. 294,000 D. 333,000 E. 342,000
Answer:
B. 317,000
Explanation:
Statement of Equivalent production
Particulars Conversion % Completion Equivalent Conversion
Opening WIP 80,000 80% 64,000
Units started & 250,000 100% 250,000
completed
Ending WIP 30,000 10% 3,000
Equivalent Units 317,000
Cost accumulation is the determination of the dollar amounts of direct materials, direct labor and overhead costs, and cost measurement is the recognition and recording of costs. True False
Answer:
true......................
Rivalry-related competitive pressures are being intensified by the efforts of rivals to expand their product lines and offer wider selection to those people who wear performance-based yoga and fitness apparel.
a. True
b. False
Answer:
True
Explanation:
The pressure that are competitive are considered to be intensified via the competitors efforts in order to diversify the product lines and the other things at the wider area that wore the performance based yoga and the apparel related to the fitness
So as per the given statement, the statement is true
hence, the option a is correct
A firm just paid its annual dividend of $1.80 and expects to increase that dividend each year. The discount rate is 11 percent. Which one of these correctly identifies an error when computing the current value of this firm's stock?
a. Po = $1.80/(0.11 -0.03): The growth rate exceeds its limitation.
b. Po = ($1.80 x 1.12(0.11 -0.03); The growth rate in the denominator should be 12 percent to match the growth rate in the numerator.
c. Po = ($1.80 x (1 +.09)[0.11 -.09); The growth rate exceeds it limitation for using this formula
d. Po = $1.80/(0.11 -0.025); The value of Dt, is incorrect as $1.80 equals Do.
Answer:
d. Po = $1.80/(0.11 -0.025); The value of D1, is incorrect as $1.80 equals Do.
Explanation:
Calculation to correctly identifies which one of these is an error when computing the current value of this firm's stock
P0 = $1.80/(0.11 - 0.025)
P0 = $1.80/0.085
P0=$9.76
Therefore Based on the information given Po = $1.80/(0.11 -0.025); because The value of D1, is INCORRECT as $1.80 equals Do.
Since its establishment on January 1, 1999, the euro has more than tripled in appreciation against the U.S. dollar, reaffirming the ability of the European Central Bank to manage monetary policy within the euro zone.
A. True
B. False
Answer:
B. False
Explanation:
The exchange rate between the euro and the dollar was 1.1719 dollars per 1 euro. Currently, the exchange rate is 1.18 dollars per euro. The euro has appreciated slightly against the US dollar, but it is a small percentage. It is not even close to multiplying its value by 3.
Hadley Corporation, which has only one product, has provided the following data concerning its most recent month of operations: Selling price $ 185 Units in beginning inventory 100 Units produced 1,970 Units sold 1,380 Units in ending inventory 690 Variable costs per unit: Direct materials $ 75 Direct labor $ 32 Variable manufacturing overhead $ 12 Variable selling and administrative expense $ 11 Fixed costs: Fixed manufacturing overhead $ 19,700 Fixed selling and administrative expense $ 30,360 What is the total period cost for the month under variable costing?
Answer:
Total period cost for the month $65,240
Explanation:
Product cost under variable costing = Direct materials + Direct labor + Variable overheads
Period cost under variable costing = Fixed manufacturing overheads + All non manufacturing overheads (Variable and fixed)
Calculation of the total period cost using variable costing
Variable selling and administrative expense ($11 × 1,380 units)
$15,180
Fixed manufacturing overhead
$19,700
Fixed selling and administrative expense
$30,360
Total period cost for the month
$65,240
Lopez Company has Retained Earnings of $48,000 at the end of March, 2020. During the month of April, Lopez has revenues of $72,000 and total operating expenses of $52,000. Lopez also pays its shareholders dividends of $10,000 on April 30. What is Lopez Ending RE = Beg. RE+NI - Div = Beg. RE + (Rev - Exp) - Div = 10,000 + (70,00 0-85,000) - 5,000 = (10,000) Company's ending balance of Retained Earnings on April 30?
Answer: $58,000
Explanation:
Ending retained earnings = Beginning retained earnings + Net income - Dividends
Net income = Revenues - Operating expenses
= 72,000 - 52,000
= $20,000
Ending retained earnings = 48,000 + 20,000 - 10,000
= $58,000
Julio purchased a stock one year ago for $27. The stock is now worth $32, and the total return to Julio for owning the stock was 37 percent. What is the dollar amount of dividends that he received for owning the stock during the year
Answer:
$5
Explanation:
Calculation to determine the dollar amount of dividends that he received for owning the stock during the year
First step is to calculate the total profit earned
Total profit=$27*37%
Total profit=$10
Second step is calculate the Value of stock with profits earned
Value of stock=$27+$10
Value of stock=$37
Now let calculate the the dollar amount of dividends
Dividend=$37-$32
Dividend=$5
Therefore the dollar amount of dividends that he received for owning the stock during the year is $5
Research on a Philippine company that filed for bankruptcy, what type of bankruptcy they filed, and its effect on the company?
Answer:
There are various reasons when a company files bankruptcy. When a company debtors raise above its assets, the company may claim bankruptcy. The business of a company will then seize when it files bankruptcy.
Explanation:
When a company files bankruptcy, its operations are closed and then analysts visit to identify worth of company's existing assets and analyze whether these assets are enough to pay off liabilities. Debtors are paid first and then with any left over amount investors are paid back.
List at least four factors a project manager should consider when identifying individuals to work on a project. Why is each important
Answer:
The four elements to consider when identifying individuals to be part of a project team:
ability to communicate effectivelySelf Assuredness, experience, and ability, Organizational agilityEmotional IntelligenceExplanation:
1. Communication is essential because in a project if there is a miscommunication between one person, group, or team and another, that could prove fatal to the goal of the project.
Communication is verbal and non-verbal and (in a project and as with most organizations) must happen across both sides of the spectrum horizontally and vertically.
For example, when expectations are not clarified or there are assumptions about what one person or team said or expects, this could lead to project disruption. When too much is also divulged, a project can go belly-up.
2. Experience and ability are key but they are not enough. Each team member must be confident in what they believe is right. Sometimes, senior members of a team may want a course of action (that is detrimental) to be executed. A junior team member who is not self-assured may think, "it's coming from above, what can one do?" this type of thinking can be very costly.
A self-assured team player would stand for what is right and in the best interest of the team and the project even at the risk of being fired.
3. Organisational Agility
It is impossible to keep a messy itenary and achieve project success.
The ability to know exactly what needs to be done in succession is an invaluable trait of project team members. This prevents waste of time and resources.
4. Emotional Intelligence
Successful team players are also successful leaders. The most cohesive teams are teams that comprise of highly emotionally intelligent people. One of the benefits of emotional intelligence is that it helps the individual to know how to regulate their own behaviors as well as respond to those of others. It is also critical to motivating others to get the job done.
Cheers
Chavez Corporation reported the following data for the month of July: Inventories: Beginning Ending Raw materials $46,000 $39,500 Work in process $25,500 $36,000 Finished goods $41,500 $56,500 Additional information: Raw materials purchases $75,500 Direct labor cost $100,500 Manufacturing overhead cost incurred $68,500 Indirect materials included in manufacturing overhead cost incurred $11,800 Manufacturing overhead cost applied to Work in Process $67,500 Any underapplied or overapplied manufacturing overhead is closed out to cost of goods sold. The cost of goods manufactured for July is:
Answer:
Cost of goods manufactured= $228,700
Explanation:
To calculate the cost of goods manufactured, we need to use the following formula:
cost of goods manufactured= beginning WIP + direct materials + direct labor + allocated manufacturing overhead - Ending WIP
cost of goods manufactured= 25,500 + (46,000 + 75,500 - 39,500) + 100,500 + (68,500 - 11,800) - 36,000
cost of goods manufactured= $228,700
We deduct the indirect material from overhead because it is already incorporated into direct materials.
Consider two college roommates, one who smokes and one who does not. The smoker wishes to smoke in the room, and the nonsmoker dislikes smoking in the room. Suppose the smoker would be willing to pay $500 to be allowed to smoke in the room during the semester, and the nonsmoker would be willing to pay $600 to keep the room smoke-free. What should happen in the socially optimal outcome
Answer:
The socially optimal outcome is that there will be no smoking in the room.
Explanation:
The above answer is based on the willingness of the nonsmoker to ensure that no smoking happens in the room. For instance, the nonsmoker can pay off the smoker, paying $600 to dissuade him from smoking in the room. On the contrary, the smoker is only willing to cough out $500, which is less than $600, in order to smoke in the room. Under social optimality, the nonsmoker wins this game.
Martha had an important meeting after lunch and wanted to avoid the hassle of waiting in line to get a meal at the cafeteria. Hence, she bought a sandwich from a vending machine that was costlier than the meal at the cafeteria. Which of the following influenced Martha's purchase decision?
A. Psychological costs.
B. Quality costs.
C. Behavioral costs.
D. Time costs.
Answer:
D
Explanation:
Current operating income for Bay Area Cycles Co. is $26,000. Selling price per unit is $100, the contribution margin ratio is 25% and fixed expense is $104,000. Required: 1. Calculate Bay Area Cycle's breakeven point in units and total sales dollars. Break-even units Break-even dollars 2. Calculate Bay Area Cycle's margin of safety and margin of safety ratio.
Answer:
Results are below.
Explanation:
First, we need to calculate the unitary contribution margin:
Unitary contribution margin= 100*0.25
Unitary contribution margin= $25
Now, we can calculate the break-even point in units and dollars:
Break-even point in units= fixed costs/ contribution margin per unit
Break-even point in units= 104,000 / 25
Break-even point in units= 4,160
Break-even point (dollars)= fixed costs/ contribution margin ratio
Break-even point (dollars)= 104,000 / 0.25
Break-even point (dollars)= $416,000
Finally, the margin of safety in dollars as a ratio:
Current sales= (26,000 + 104,000) / 25
Current sales= 5,200
Margin of safety= (current sales level - break-even point)
Margin of safety= (5,200*100 - 416,000)
Margin of safety= $104,000
Margin of safety ratio= (current sales level - break-even point)/current sales level
Margin of safety ratio= 104,000 / 520,000
Margin of safety ratio= 0.2 = 20%
The current price of an annual coupon bond is 100. The derivative of the price of the bond with respect to the yield to maturity is -700.The yield to maturity is an annual effective rate of 8%. Calculate the duration of the bond.
Answer:
The duration of the bond = 7.56 years
Explanation:
Given the current price = 100
DM = -1 x Current derivative price / Current price
DM = (-1 x -$700 / $100)
DM = 7
Now, D = DM (1 + r)
D = 7 (1 + 0.08)
D = 7.56
The duration of the bond = 7.56 years
You invested 50% of the wealth in stock A and the remaining 50% in stock B. The expected rates of returns on A and B are given below: Year Expected return on A Expected return on B 2000 14% 16% 2001 15% 17% 2002 16% 18%2003 17% 19%Find the standard deviation of the portfolio. A. 0.955%.B. 1.291%.C. 1.697%.D. 2.124%.E. 2.890%.
Answer:
B. 1.291%
Explanation:
The computation of the standard deviation is shown below;
= 2000 + 2001 + 2002 + 2003
= 0.5 × 14% + 0.5 × 16% + 0.5 × 15% + 0.5 × 17% + 0.5 × 16% + 0.5 × 18% + 0.5 × 17% + 0.5 × 19%
= 15% + 16% + 17% + 18%
= stdev( 15% + 16% + 17% + 18%)
= 1.291%
Hence, the correct option is b.
Bill’s Mechanical Devices Inc. produces robots for the automotive industry. If its average variable costs are given by AVC = 25, its fixed costs are $2,500, and it charges $75 a robot, what is Bill’s break-even level of output?
Answer:
50 units
Explanation:
The computation of the break even level of output is given below:
TVC = AVC × Q
= 25 × Q
Total cost is
= TVC + FC
= 25Q + $2,500
Total revenue is
= P × Q
= 75Q
Now in Break even
TR = TC
75Q = 25Q + $2,500
Q = $2,500 ÷ 50Q
= 50 units
If a company sells its smart phones for $400 and the phones have a COGS of $250, how many additional phones would the company have to sell if it decided to spend an extra $150,000 on advertising to promote the phones
Answer:
Units to be sold= 1,000
Explanation:
Giving the following information:
Selling price= $400
COGS= $250
Increase in costs= $150,000
To calculate the number of units to be sold to cover the incremental costs, we need to use the following formula:
Units to be sold= increase in costs/ contribution margin per unit
Units to be sold= 150,000 / (400 - 250)
Units to be sold= 1,000
company reports the following beginning inventory and two purchases for the month of January. On January 26, the company sells 350 units. Ending inventory at January 31 totals 150 units. Units Unit Cost Beginning inventory on January 1 320 $ 3.00 Purchase on January 9 80 3.20 Purchase on January 25 100 3.34 Required: Assume the periodic inventory system is used. Determine the costs assigned to ending inventory when costs are assigned based on the weighted average method. (Round per unit costs to 2 decimal places. Amounts to be deducted should be indicated with a minus sign.)
Answer:
Company A
The cost assigned to Ending Inventory under periodic inventory system and based on the weighted average method is:
= $465
Explanation:
a) Data and Calculations:
Units Unit Cost Total Costs
Beginning inventory on January 1 320 $ 3.00 $960 (320 * $3.00)
Purchase on January 9 80 3.20 256 (80 * $3.20)
Purchase on January 25 100 3.34 334 (100 * $3.34)
Total 500 $3.10 $1,550 ($1,550/500)
Units sold -350 $3.10 -$1,085 (350 * $3.10)
Ending inventory 150 $3.10 $465 (130 * $3.10)
