Answer:
alpha particle needs to be added to the equation.
Explanation:
Given;
atomic mass of Americium = 241
atomic mass of neptunium = 237
The difference in atomic mass of the radioactive elements given is calculated as;
241 - 237 = 4
The particle with atomic mass of 4 is alpha particle usually represented with helium atom.
Am²⁴¹ -----> He⁴ + Np²³⁷
Thus, alpha particle needs to be added to the equation.
Answer:
4/2 HE
Explanation:
a p e x!
DUE IN 1 MINUTE HELP I'M DESPERATE
what is bond stability??
Answer:
Bond order is a counting method that gives an idea about numbers of electrons shared between atoms. A species with a higher bond order is more stable. A bond order equal to 2 is a double bond, and a bond order of 3 is a triple bond.
Explanation:
For some transformation having kinetics that obey the Avrami equation (Equation 11.17), the parameter n is known to have a value of 2.3. If, after 145 s, the reaction is 50% complete, how long (total time) will it take the transformation to go to 88% completion
Answer:
t ≈ 235.47 secs
Explanation:
Calculate how long it will take the transformation to go to 88% completion
Given that Avrami equation ( y )= 1 - exp( - kt^n )
n = 2.3
t = 145 secs
reaction = 50% after t = 145 secs
Reaction = 88% after t = ?
attached below is a detailed solution
What products will form when bromine is added to gallium chloride?*
A.)no reaction will occur
B.)gallium bromide and chlorine
C.)gallium bromine and chloride
D.)bromine chloride and gallium
The pressure can be increased by doing what?
A)increasing the force and decreasing the area
B)increasing the force and increasing the area
C)decreasing the force and increasing the area
D)none of the above
Which best describes the law of conservation of mass? 0 The coefficients in front of the chemicals in the reactants should be based on the physical state of the products. O Products in the form of gases are not considered a part of the total mass change from reactants to products. O When reactants contain both a solid and a liquid, the solid counts toward the overall mass and the liquid does not. O The mass of the reactants and products is equal and is not dependent on the physical state of the substances.
Explanation:
pdrias darme la traduccion no te entiendo
Is carbonic acid (H2CO3) soluble in water?
Answer:
it is soluble in water
Explanation:
mark brainliest pliiz cutee:)
Atoms of which elements form bonds without satisfying the octet rule?
Answer:
Helium and hydrogen......
what do you mean by carrier
Answer:
1 : one that carries : bearer, messenger. 2a : an individual or organization engaged in transporting passengers or goods for hire. b : a transportation line carrying mail between post offices.
A gas is contained in a thick-walled balloon. When the pressure changes from ___ kPa to 114 kPa, the volume changes from 0.654 L to 1.32 L and the temperature changes from 596 K to 715 K.
Answer: 191.8
Explanation:
Answer:
191.8
Explanation:
I know the answer is correct I got the exact same one :)
Suppose that scientists want to study a feature of the galaxy that is very far away. They decide to use a telescope that observes high-energy gamma rays. Explain why this would be a good choice.
Answer & Explanation:
Gamma rays are the most energetic form of electromagnetic radiation. By observing the distant galaxy at gamma-rays, scientists can search for new physics, test theories, and perform experiments that are not possible in earth-bound laboratories.
Write a structural formula for the principal organic product formed in the reaction of methyl bromide with each of the following compounds:
1. Sodium hydroxide
2. Potassium ethoxide
3. Sodium benzoate
4. Lithium azide
Answer:
1. CH3Br + NaOH --------> H3C---OH + Na---Br
Explanation:
HELPP PLZ FAST WILL GIVE BRAINLIEST
Benzene, a nonpolar, colorless solute, is most commonly found in oil and is a major component in gasoline.
In which of these two solvents will benzene most likely dissolve?
Solvent
Characteristics
A
Carbon tetrachloride
• Colorless liquid, noncombustible
• Nonpolar
Ethanol
• Flammable, colorless liquid
• Polar
Methanol
• Distinctive odor; volatile, colorless liquid
• Polar
Cyclohexane
• Strong odor; flammable; colorless liquid
• Nonpolar
OA
OB
ОС
OD
daily routine care of farm animal husbandry
What type of intermolecular forces occur between 2 oil molecules?
Answer:
The three main kinds of intermolecular interactions are dipole-dipole interactions, London dispersion forces, and hydrogen bonds
Explanation:
Why do scorpions glow on a black light?
Answer:
All scorpions fluoresce under ultraviolet light, such as an electric black light or natural moonlight. The blue-green glow comes from a substance found in the hyaline layer, a very thin but super tough coating in a part of the scorpion's exoskeleton called the cuticle
Explanation:
Answer:
All scorpions fluoresce under ultraviolet light, such as an electric black light or natural moonlight. Much like many other creepy, crawly insects, scorpions like hiding in dark places. ... If you're worried that you may have a scorpion problem, you can use a black light to search for them at night. When a black light hits a scorpion, the proteins on its exoskeleton create a bright neon blue hue.Scorpions do not like heat and bright light. They lose some of what little water they have to evaporation. So they use their sensitivity to UV rays to determine if it's dim enough for them to crawl out and get to business. He thinks that scorpions glow to convert the dim UV light from the moon and the stars into the colour that they see best – blue-green. This could explain why scorpion eyes are so exquisitely sensitive, to the point where they can detect the faint glow of starlight against the background of the night sky.Given the high densities of scorpions in some areas, their importance in ecological food webs, particularly with respect to helping control insect populations, is considerable. Many are sensitive to environmental degradation and are considered equilibrium species. Ecology: Scorpions are primarily nocturnal.Scorpions are preyed upon by large centipedes, tarantulas, lizards, birds (especially owls), and mammals such as bats, shrews, and grasshopper mice.
Explanation: I added a little more info about them please give me brainliest
How many moles are there in 4.9x10^23 molecules of CO2?
F. 0.81 moles of CO2
G 8.14X10^45
H. 2.95X10^47
J. 2052.44
Answer:
0.81 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{4.9 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{4.9}{6.02} \\ = 0.813953...[/tex]
We have the final answer as
0.81 molesHope this helps you
2C 2 H 2 (g)+5O 2 (g) CO 2 (g) + 2H 2 O (l)
Answer:
2c2gh2+5cg2o4+2h2lo
Explanation:
why are electrical wires covered with plastic coating
Answer:
For safety.
Explanation:
Because uncovered wires are conductors, an electric current could damage someone if touched. Plastic and rubber are insulators, meaning that current cannot pass through them.
A 90-m3 basement in a residence is found to be contaminated with radon coming from the ground through the floor drains. The concentration of radon in the room is 1.5 Bq/L under steady-state conditions. The room behaves as a CSTR and the decay of radon is a first-order reaction with a decay rate constant of 2.09 3 1026 s21 . If the source of radon is closed off and the room is vented with radon-free air at a rate of 0.14 m3 /s, how long will it take to lower the radon concentration to an acceptable level of 0.15 Bq/L
Answer:
25 minutes
Explanation:
V = Volume = [tex]90\ \text{m}^3[/tex]
[tex]C_0[/tex] = Radon concentration under steady state = 1.5 Bq/L
k = Radon decay rate = [tex]2.09\times 10^{-6}\ \text{s}^{-1}[/tex]
[tex]Q[/tex] = Venting rate = [tex]0.14\ \text{m}^3/\text{s}[/tex]
[tex]C_f[/tex] = Final concentration of radon = 0.15 Bq/L
Theoretical detention time is given by
[tex]\theta=\dfrac{V}{Q}\\\Rightarrow \theta=\dfrac{90}{0.14}\\\Rightarrow \theta=642.86\ \text{s}[/tex]
We have the relation
[tex]C_f=C_0e^{-(\dfrac{1}{\theta}+k)t}\\\Rightarrow t=\dfrac{\ln\dfrac{C_f}{C_0}}{-(\dfrac{1}{\theta}+k)}\\\Rightarrow t=\dfrac{\ln\dfrac{0.15}{1.5}}{-(\dfrac{1}{642.86}+2.09\times 10^{-6})}\\\Rightarrow t=1478.25\ \text{s}=\dfrac{1478.25}{60}=24.63\approx 25\text{minutes}[/tex]
The time taken to reach the acceptable level of concentration is 25 minutes.
How is gravity an attractive force?
If objects with a greater mass have greater gravitational pull, why is our solar
system, Sun, planets and asteroids, NOT pulled into Alpha Centauri A?
Answer:
It's too far away
Explanation:
According to classical mechanics, gravitational pull is inversely proportional to the distance squared; as the distance increases, the gravitational pull decreases at a faster and faster rate. Since Alpha Centauri A is a few lightyears (Tens of trillions of kilometers away), without even needing to calculate the force of gravity, it is very miniscule.
From these four cycles which are water cycle, carbon cycle, nitrogen cycle, and phosphorus cycle which cycle has more nutrients
Answer:
Nitrogen cycle
Explanation:
Please help ASAP
Identify the atom with the ground-state electron configuration shown for its valence shell.
3s^2 3p^1
1. (An example of non-point-source pollution is
A. Wastewater from a leaking pipe.
B. Fertilizer runoff from lawns.
C. Oil from a leaking underground tank.
D. Chemicals released from a paper mill
Answer:
i think the answer is c.
Explanation:
The speed of an electron is 1.68*10^8m/s what is the wavelength
Answer:
[tex]\lambda =4.33x10^{-12}m=4.33pm[/tex]
Explanation:
Hello there!
In this case, since the speed, wavelength and mass of an electron are related via the the Broglie wavelength:
[tex]\lambda =\frac{h}{m*v}[/tex]
Thus, by plugging in the mass of the electron and the Planck's constant, we obtain the following wavelength:
[tex]\lambda =\frac{6.626x10^{-34}J*s}{9.11x10^{-31}kg*1.68x10^{8}m/s}\\\\\lambda =4.33x10^{-12}m=4.33pm[/tex]
Best regards!
Considering change of state descriptions, select the name of the change of state for when energy is absorbed. Group of answer choices sublimation freezing condensation deposition
Answer: Sublimation
Explanation:
Sublimation : It is a process in which a solid directly changes to gaseous phase by providing heat.
Freezing is a process in which a liquid changes into solid phase when allowed to cool.
Condensation is a process in which a gas changes into liquid phase when allowed to cool.
Deposition is a process in which a gas deposits as solid phase when allowed to cool.
Thus change of state where energy is absorbed is sublimation.
Why do you think there are different stars in each nighttime section of the artifact?
Answer:
The sky looks different in each nighttime section of the artifact because the artifact sections represent different seasons. ... Different constellations are visible on different nights throughout the year because of the earth's orbit. The Earth orbits around the sun. A full orbit is 365 days or one year.
Explanation:
Calculate the pH of a 0.010 M NaNO2 solution.
Answer:
Calculate the pH of 0.010 M HNO2 solution. The K, for HNO2 is 4.6 x 104
Answer: pH = 2.72
Argon occupies a volume of 28.3 L at a pressure of 0.36 atm. Find the volume of argon when the pressure is increased to 0.85 atm.
Answer:
12
Explanation:
Boyles law
P1 (.36)
V1(28.3)
P2(.85)
V2(?)
P1*V1=P2*V2
plug it in, and you get 12
