An antacid tablet weighing 1.30g was fully neutralized at 42.00 mL(an excess amount) of 0.250MHCl. 10.00 mL of 0.100 M NaOH was then used to back titrate the excess HCl. How many moles of acid did the antacid neutralize

Answer:

2.23M

Explanation:

Molarity of a solution is calculated thus

Molarity = number of moles (n) ÷ volume (V)

According to this question, 4.11g of Zn metal was used in order to reach a volume of EDTA solution of 28.26 mL.

28.26mL = 28.26/1000

= 0.02826L

Using mole = mass/molar mass to calculate no. of moles of Zn

Mole = 4.11/65.4

mole = 0.0628mol

Molarity = 0.0628 ÷ 0.02826

Molarity = 2.23M

The concentration of the EDTA solution used is 2.23M

endothermic absorbs heat

exothermic gives heat

a. endothermic

b. exothermic

c. endothermic

d. exothermic

a. Ice melting - endothermic

b. Water condensing on the surface - exothermic

c. Baking a cake - endothermic

d. The chemical reaction inside an instant cold pack - endothermic

e. A car using gasoline - exothermic

An exothermic reaction can be described as a thermodynamic chemical reaction that emits energy from the system to its surroundings usually in the form of light, heat, or sound.

While an endothermic reaction can be described as an opposite of an exothermic reaction where the energy gains in the form of heat. In exothermic chemical reactions, the bond energy is transformed into thermal energy.

In exothermic reactions, the reaction happens the form of the kinetic energy of molecules when the energy is released. The release of energy is due to the electronic transition of electrons from one energy level to another.

The burning of gasoline, and water condensation is also an exothermic reaction in which energy is released while ice melting and baking cake is an endothermic reaction.

Learn more about the exothermic process, here:

brainly.com/question/12321421

#SPJ5

Answer:

See explanation

Explanation:

The molecule IF5 possesses five I-F polar bonds. However, the presence of polar bonds does not automatically imply that the molecule will be polar.

The geometry of the molecule is very important in determining the polarity of a compound. Since IF5 has a lone pair of electrons, the molecule is bent and as such there is a permanent dipole moment created in the molecule thereby making IF5 polar in nature.

Answer:

c

letra c certeza confia

Answer:

0.17 g

Explanation:

Since the volume of gas collected is 132 mL, we need to find the number of moles of gas present in 132 mL.

So, number of moles, n = volume of gas, v/molar volume, V

n = v/V where v = 132 mL = 0.132 L and V = 22.4 L

So, substituting the values of the variables into the equation, we have

n = v/V

n = 0.132 L/22.4 L

n = 0.005893 mol

We then need to calculate the molar mass of CO, M = atomic mass of carbon + atomic mass of oxygen = 12 g/mol + 16 g/mol = 28 g/mol

Also, number of moles of gas, n = m/M where m = mass of CO and M = molar mass of CO

m = nM

m = 0.005893 mol × 28 g/mol

m = 0.165004 g

m ≅ 0.17 g to 2 significant digits

Answer:

1.00 M

Explanation:

Sn^2+ reacts with KMNO4 as follows;

5Sn^2+(aq) + 2MnO4^-(aq) + 16H^+(aq) ----> 5Sn^4+(aq) + 2Mn^+(aq) + 8H2O(l)

The number of moles of MnO4^- reacted = 42.1/1000 L × 0.145 mol/L

= 0.0061 moles

If 5 moles of Sn^2+ reacts with 2 moles of MnO4^-

x moles of Sn^2+ reacts with 0.0061 moles of MnO4^-

x= 5 × 0.0061/2

x= 0.015 moles

Since the volume of the Sn^2+ solution is 15.00mL or 0.015 L

number of moles = concentration × volume

Concentration = number of moles/volume

Concentration= 0.015 moles/0.015 L

Concentration = 1 M

Explanation:

The volume of given lead nitrate solution is:

52.5 mL.

The amount of lead iodide formed is ---0.248 g.

To get the molarity of lead (II) ion follow the below-shown procedure:

The number of moles of lead iodide formed is:

[tex]number of moles of lead iodide(n)=mass of lead iodide/its molecular mass\\n=0.248 g/461.01g/mol\\n=0.000537mol[/tex]

0.000537 mole of lead iodide contains --- 0.000537 moles of lead (II) ion.

Thus, the number of moles are there, volume is there, and to get the molarity of lead (II) ion use the formula:

[tex]Molarity=\frac{number of moles}{volume in L.} \\M=0.000537 mol / 0.0525 L.\\M=0.0102mol/L[/tex]

Molarity of lead iodide is --- 0.0102 M.

Answer:

D. 3.04 × 10^-19 J

Explanation:

c = lambda * nunu = c/lambda

E = h* nu

E = h * c/lambda = 6.626x10^-34 J-sec * 3x10^8 m/sec / 6.54x10^-7 m

E = 3.04x10^-19 J

Answer: Organic compounds ending with the name (-ene) indicate that the compounds contain double bonds in their molecules.

Explanation:

Organic compounds are those molecules that contains carbon atoms (as their main element), hydrogen and oxygen which are usually present. The presence of numerous organic compounds is due to the following properties of carbon:

--> the exceptional ability of carbon atoms to catenate, that is, to combine with one another to form straight chains, branched chains or ring compounds containing many carbon atoms.

--> The ease with which carbon combines with hydrogen, oxygen, Nitrogen and halogens

--> The ability of carbon atoms to form single, DOUBLE or triple bonds.

The organic compound that has the name ending with -ene are known as the alkenes. The members of the alkene series are formed from the alkanes by the removal of two hydrogen atoms and the introduction of a DOUBLE BOND in the carbon chain. They are named after the corresponding alkanes by changing the -ane ending to -ene.

Note: the systematic name of a compound is formed from the root hydrocarbon by adding a suffix and prefixes to denote the substitution of the hydrogen atoms.

Answer:

fishes are cold blooded

Ethane consists of 6C−H bonds and 1C−C bond. Total number of bonds is 7. Each bond is made up of two electrons

#BRAINLEST LOVE❣️

Answer:

Explanation:

this guy on brainly already did it:

Alleei

Virtuoso

4.8K answers

37.1M people helped

Answer :  The work done for path A and path B is -685.3 J and -478.1 J  respectively.

Explanation :

To calculate the work done for path A :

First we have to calculate the moles of the gas.

where,

= initial pressure of gas  = 2.57 atm

= initial volume of gas  = 3.42 L

n = moles of gas  = ?

R = gas constant = 0.0821 atm.L/mol.K

T = temperature of gas  = 298 K

Now put all the given values in the above formula, we get:

According to the question, this is the case of isothermal reversible expansion of gas.

As per first law of thermodynamic,

where,

= internal energy

q = heat

w = work done

As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.

So, at constant temperature the internal energy is equal to zero.

The expression used for work done will be,

where,

w = work done on the system = ?

n = number of moles of gas  = 0.359 mole

R = gas constant = 8.314 J/mole K

T = temperature of gas  = 298 K

= initial volume of gas  = 3.42 L

= final volume of gas  = 7.39 L

Now put all the given values in the above formula, we get :

Thus, the work done of path A is, -685.3 J

To calculate the work done for path B :

The formula used for isothermally irreversible expansion is :

where,

w = work done

= external pressure = 1.19 atm

= initial volume of gas = 3.42 L

= final volume of gas = 7.39 L

Now put all the given values in the above formula, we get :

Thus, the work done of path B is, -478.1 J

Answer:

Kc = [Zn²⁺] / [Cd²⁺]

Explanation:

Let's consider the spontaneous redox reaction between Cd²⁺ and Zn.

Cd²⁺(aq) + Zn(s) ⇄ Cd(s) + Zn²⁺(aq)

The equilibrium constant, Kc, is the ratio of the equilibrium concentrations of products over the equilibrium concentrations of reactants each raised to the power of their stoichiometric coefficients. It only includes gases and aqueous species.

Kc = [Zn²⁺] / [Cd²⁺]

First Reaction is a Decomposition reaction as a single reactant hets decompoesed to form two products.Second reaction is a Synthesis reaction as two Reactant reacts together to form one product.

Decomposition reactions are processes in which chemical species break up into simpler parts.

Usually, decomposition reactions require energy input.

Hence, First Reaction is a Decomposition reaction as a single reactant hets decompoesed to form two products.Second reaction is a Synthesis reaction as two Reactant reacts together to form one product.

Learn more about Reaction here ;

https://brainly.com/question/27948961

#SPJ2

Answer:

1. Participating in calcium homeostatis storage of calcium.

2. High capacity calcium (Ca) regulation and protection against herbivory

[tex]\large \boxed{\sf 2 \: functions \: of \: crystals \: are :- } [/tex]

_________________

⟹

[tex] \sf \: \underline{ Calcium \: oxalate \: (CaOx) \: crystals} \: are \: distributed \: \\\sf among \: all \: taxonomic \: levels \\ \sf\: of \: photosynthetic \: organisms \: from \\ \sf \: small \: algae \: to \: angiosperms \: and \: giant \: gymnosperms .[/tex]

__________________

⟹

[tex]\sf Bone \: is \: mostly \: made \: of \: \underline{mineral \: crystals} \: \\ \sf and \: the \: protein \: collagen. \: The \: mineral  \: crystals \: bone  \\ \sf\: provide \: strength \: and \: rigidity \: for \: the \: matrix \: upon \: \\ \sf \: and \: within \: which \: they \: are \: deposited.[/tex]

Answer:35.1g of CO2

Explanation:

C3H8+5O2------=3CO2+4H2O

Answer:

See explanation

Explanation:

Number of moles = reacting mass/molar mass

Number of moles of CaCl2•2H2O = 1.50 g/147.02 = 0.0102 moles

From the equation;

Na2CO3 + CaCl2•2H2O -> CaCO3 + 2NaCl + 2H2O

We can see is 1:1

1 mole of Na2CO3 reacts with 1 mole of CaCl2•2H2O

x moles of Na2CO3 reacts with 0.0102 moles of CaCl2•2H2O

x = 1 × 0.0102 moles/1

x = 0.0102 moles of Na2CO3

Mass of Na2CO3 = 0.0102 moles of Na2CO3 × 106g/mol = 1.08 g of Na2CO3

Answer:

a) C₆H₁₂O + 8.5 O₂ ⇒ 6 CO₂ + 6 H₂O

b) Fe₂(SO₄)₃ + 3 Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃

Explanation:

a) A combustion is a reaction of a compound with oxygen to produce carbon dioxide and water. The corresponding equation is:

C₆H₁₂O + O₂ ⇒ CO₂ + H₂O

We will start balancing C atoms by multiplying CO₂ by 6 and H atoms by multiplying H₂O by 6.

C₆H₁₂O + O₂ ⇒ 6 CO₂ + 6 H₂O

Then, we get the balanced equation by multiplying O₂ by 8.5.

C₆H₁₂O + 8.5 O₂ ⇒ 6 CO₂ + 6 H₂O

b) This is a double displacement reaction of the general structure:

Salt 1 + Base 1 = Salt 2 + Base 2

The corresponding equation is:

Fe₂(SO₄)₃ + Ba(OH)₂ ⇒ BaSO₄ + Fe(OH)₃

First, we will balance Fe atoms by multiplying Fe(OH)₃ by 2 and S atoms by multiplying BaSO₄ by 3.

Fe₂(SO₄)₃ + Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃

Then, we will get the balanced equation by multiplying Ba(OH)₂ by 3.

Fe₂(SO₄)₃ + 3 Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃

Answer:

a.[tex]\bold{C_{6}H_{12}O_{6}\rightarrow 6CO_{2}+6H_{2}O}[/tex]

△H=−72 kcal

The energy required for production of 1.6 g of glucose is [molecular mass of glucose is 180 gm]

b.

[tex]\bold{Fe_{2}(SO_{4})_{3}+3Ba(OH)_{2}\rightarrow 3BaSO_{4}+2Fe(OH)_{3}}[/tex]

The iron(III) ions and chloride ions remain aqueous and are spectator ions in a reaction that produces solid barium sulfate.

Answer:

[tex]n=0.033mole[/tex]

Explanation:

From the question we are told that:

Initial volume [tex]V_1=0.40L[/tex]

Final Volume[tex]V_2=5.0L[/tex]

Work [tex]W=210J[/tex]

Temperature [tex]T=300k[/tex]

Generally the equation for Ideal gas is mathematically given by

[tex]W=nRTIn\frac{V_2}{V_1}[/tex]

[tex]n=\frac{W}{RTIn\frac{V_2}{V_1}}[/tex]

[tex]n=\frac{210}{8.32*300In\frac{5.0}{0.4}}[/tex]

[tex]n=0.033mole[/tex]

Answer:

CH3OH < FCH2OH < F2CHOH < F3COH

Explanation:

Let us recall that, for a carboxylic acid, the dissociation of the acid yields;

RCOOH ⇄RCOO^- + H^+

The ease of dissociation and release of the hydrogen ion depends on the nature of the group designated R.

When R is is a highly electronegative element, the -I inductive effect causes the hydrogen to become less tightly held by the C-Cl bond.

As the number of electron withdrawing substituents increaseses, the acid ionizes much more and becomes stronger.CH3OH < FCH2OH < F2CHOH < F3COH

Hence, the order of decreasing acid strength is;

Answer:

The answer is B. Carbonyl

Carbonyl is the functional group is used in other functional groups. Therefore, option (B) is correct.

A functional group with the formula C=O that is composed of a carbon atom double-bonded to an oxygen atom and is divalent at the C atom is known as a carbonyl group in organic chemistry.

A carbonyl gathering is a synthetically natural utilitarian gathering made out of a carbon iota twofold clung to an oxygen molecule - - > [C=O] The most straightforward carbonyl gatherings are aldehydes and ketones typically connected to another carbon compound.

A functional group with a carbon double bonded to an oxygen is called a carbonyl group. They have unsurprising properties, like extremity, instability, and reactivity.

Learn more about carbonyl functional group:

https://brainly.com/question/24186249

#SPJ7

Answer: The volume of dinitrogen difluoride gas collected is 13.31 L.

Explanation:

Given: Temperature = [tex]5.0^{o}C[/tex] = (5 + 273) K = 278 K

Moles = 583 mmol (1 mmol = 0.001 mol) = 0.583 mol

Pressure = 1 atm

Formula used to calculate volume is as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant  = 0.0821 L atm/mol K

T = temperature

Substitute the values into above formula as follows.

[tex]PV = nRT\\1 atm \times V = 0.583 \times 0.0821 L atm/mol K \times 278 K\\V = 13.31 L[/tex]

Thus, we can conclude that the volume of dinitrogen difluoride gas collected is 13.31 L.

Answer:

6.214 degrees-mL/gdm

Explanation:

The specific rotation α' = α/LC where α = observed rotation, L = length of tube and C = concentration of solution.

Given that α = 1.74, L = length of cell = 50 mm = 0.50 dm and C = m/V where m = mass of glyceraldehyde = 5.60 g and V = volume = 10 ml

So, C = m/V = 5.60 g/10 ml = 0.560 g/ml

Since α' = α/LC

substituting the values of the variables into the equation, we have

α' = α/LC

α' = 1.74/(0.50 dm × 0.560 g/ml)

α' = 1.74/(0.28 gdm/l)

α' = 0.006214 °mL/gdm

α' = 6.214 °mL/gdm

α' = 6.214 degrees-mL/gdm

Answer:

are in the same orbital

Explanation:

Answer:

are in the same orbit

Explanation:

Answer:

The molality of solution=12.605 m

Explanation:

We are given that

Molar mass of Hydrogen peroxide, M=34 g/mol

Density of solution, [tex]\rho=1.11gcm^{-3}[/tex]

30% Means mass of solute (Hydrogen peroxide)=30 g

Mass of solvent =100-30=70 g

Total mass of solution, m=100 g

Number of moles of solute=[tex]\frac{given\;mass}{molar\;mass}[/tex]

Using the formula

Number of moles of hydrogen peroxide=[tex]\frac{30}{34}[/tex]

Now, molality of solution

[tex]m=\frac{number\;of\;moles\;of\;solute}{mass\;of\;solvent}\times 1000[/tex]

[tex]m=\frac{30}{70\times 34}\times 1000[/tex]

[tex]m=12.605 m[/tex]

Hence, the molality of solution=12.605 m

Answer:

c.sf4  b.2

Explanation:

Answer:

a. CaCl₂.2 H₂O (aq) + K₂C₂O₄. H₂O (aq) ----> 2 KCl + CaC₂O₄ (s) + 3 H₂0 (l)

b. Ca²+ (aq) + C₂O₄²- (aq) ----> CaC₂O₄ (s)

C. moles of CaCl₂.2 H₂O reacted in the mixture = 0.00222 moles

d. Mass of CaCl₂.2 H₂O reacted = 0.326 g

e. Moles of K₂C₂O₄.2 H₂O reacted = 0.00222 moles

f. Mass of K₂C₂O₄.H₂O reacted = 0.408 g

g. mass of K₂C₂O₄.H₂O remaining unreacted = 0.145 g

h. Percent by mass CaCl₂.2 H₂O = 37.1%

Percent by mass of K₂C₂O₄.H₂O = 62.9%

Explanation:

a. Molecular equation of the reaction is given below :

CaCl₂.2 H₂O (aq) + K₂C₂O₄. H₂O (aq) ----> 2 KCl + CaC₂O₄ (s) + 3 H₂0 (l)

b. The net ionic equation is given below

Ca²+ (aq) + C₂O₄²- (aq) ----> CaC₂O₄ (s)

C. mass CaC₂O₄ produced = 0.284 g, molar mass of CaC₂O₄ = 128 g/mol

moles CaC₂O₄ produced = 0.284 g / 128 g/mol = 0.00222 moles

Mole ratio of CaC₂O₄ and CaCl₂.2 H₂O is 1 : 1, therefore moles of CaCl₂.2 H₂O reacted in the mixture = 0.00222 moles

d. Mass of CaCl₂.2 H₂O reacted in the mixture = number of moles × molar mass

Molar mass of CaCl₂.2 H₂O = 147 g/mol

Mass of CaCl₂.2 H₂O reacted = 0.00222 moles × 147 g/mol = 0.326 g

e. Mole ratio of K₂C₂O₄.2 H₂O and CaC₂O₄ is 1 : 1, therefore, moles of K₂C₂O₄.2 H₂O reacted = 0.00222 moles

f. Mass of K₂C₂O₄.H₂O reacted in the mixture = number of moles × molar mass

Molar mass of K₂C₂O₄.H₂O = 184 g/mol

grams K2C2O4-H2O reacted = 0.00222 moles 184 g/mole = 0.408 g

g. Mass of sample = 0.879 g

mass of CaCl₂.2 H₂O in sample completely used up = 0.326 g

mass of K₂C₂O₄.H₂O in sample = 0.879 g - 0.326 g = 0.553 g

mass of K₂C₂O₄.H₂O remaining unreacted = 0.553 g - 0.408 g = 0.145 g

h. Percent by mass CaCl₂.2 H₂O = 0.326 /0.879 x 100% = 37.1%

Percent by mass of K₂C₂O₄.H₂O = 0.553/0.879 × 100% = 62.9%

Answer:

2.772 seconds

Explanation:

Given that;

t1/2 = 0.693/k

Where;

t1/2 = half life of the reaction

k= rate constant

Note that decomposition is a first order reaction since the rate of reaction depends on the concentration of one reactant

t1/2 = 0.693/2.5 x 10-1 s-1

t1/2= 2.772 seconds

Answer:

Ca(OH)2 +CO2========CaCO3 +H2O

Explanation:

since the number of elements in the right is equal to that of the elements in the left side shows it is balanced