The speed and wavelength of coastal water waves are 4.0 m/s and 6.0 m respectively. When the waves enter a shallower region, the speed decreases to 1.7 m/s. What is the wavelength in the shallower region?

Answer:

2min

Explanation:

i think it will be clear from photo

Answer: The formula for current is charge/time

so here we have to change subject so we are asked to look for time  

Explanation: so it would be T=Q/I

T=4/2

T=2s

hope this helpss

Answer:

Answer to the following answer is as follows;

Explanation:

In the northwestern city of Milan, Mussolini formed his nationalist regime in 1919. He organised black-shirted street warriors into teams. His "Blackshirts" raped and expelled socialists and communists from municipal administrations.

The Blackshirts, originally known as the Squadrismo, were formed in 1919 by a group of dissatisfied former soldiers.

Explanation:

A photodiode or solar cell may be considered as a source of emf, similar to a battery, resulting in an electrical voltage generated by charge separation driven by light rather than chemical reaction. Other devices that produce emf are fuel cells, thermocouples, and thermopiles.

Answer:

Use the formula ∆H = m x s x ∆T to solve.

Explanation:

Once you have m, the mass of your reactants, s, the specific heat of your product, and ∆T, the temperature change from your reaction, you are prepared to find the enthalpy of reaction. Simply plug your values into the formula ∆H = m x s x ∆T and multiply to solve.

Answer:

1.67 amperes

Explanation:

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

[tex] V = IR [/tex]  ......equation 1

Where;

Making I the subject of formula, we have;

[tex] I = \frac {V}{R} [/tex]  .....equation 2

Given the following data;

To find the current flowing through the battery, we would use eqn 2;

[tex] I = \frac {10}{6} [/tex]  

Current, I = 1.67 amperes

Answer:

An artificial satellites revolves around the earth under the influence of its gravitational force. So it does not require any energy to revolve around energy.

or maybe god:)))(

Answer:

They transform energy

Explanation:

thermodynamics deals with transfers of energy from one place to another and from one form to another and it's also deal with the relationship between heat and other forms of energy

Answer:

1 KM per minute is the real speed in minutes, turn that into 1000 meters per minute and divided by 60, you get a good number of 16.6666666667 which means you could go 50 meters per 3 seconds

Explanation:

so it would be 16.6666666667 meters per second

Answer:

B

Explanation:

According to boyle's law for a gas the pressure and volume are inversely proportional.this simply means when one increases the other one reduces and when the other one reduces the other increases.so in this case the volume increased to twice it original amount meaning the pressure will reduce to half the volume.

I hope this helps

Answer:

A) 111 N

B) F_net = 0 N

C) 100 N, in the opposite direction of the motion.

D) μ = 0.3274

Explanation:

A) The component of the trunks weight acts parallel to the plane but in the vertical direction and so;

W = Fsin θ

W = 325 sin 20

W = 325 × 0.3420

W ≈ 111 N

B) We are told the trunk is moving with a constant velocity and for this reason the sun of the forces will equal to zero.

Thus; F_net = 0 N

C) Since the kinetic friction force needs to balance the component of the weight, the magnitude is;

F_f = 211 - 111 = 100 N

The direction will be in the opposite direction since it's against the motion.

D) From friction formula, we know that;

F_f = μW cos θ

100 = μ × 325 × cos 20

μ = 100/(325 × cos 20)

μ = 0.3274

Answer:

m=0.2kg=200g

Explanation:

F=2N, a=10m/s²

F=ma⇒ m=F/a=2/10=0.2kg=200g

Answer:

[tex]\boxed {\boxed {\sf 200 \ grams}}[/tex]

Explanation:

According to Newton's Second Law of Motion, force is the product of mass and acceleration.

[tex]F=m*a[/tex]

The force is 2 Newtons and the acceleration is 10 meters per square second. First, we should convert the units of Newtons to make unit cancellation easier. 1 Newton is equal to 1 kilogram meter per second squared. The force of 2 N equals 2 kg*m/s²

Substitute the known values into the formula.

[tex]2 \ kg*m/s^2 = m * 10 \ m/s^2[/tex]

We are solving for the mass, so we must isolate the variable m. It is being multiplied by 10 meters were second squared. The inverse of multiplication is division. Divide both sides by 10 m/s².

[tex]\frac { 2 \ kg *m/s^2}{10 \ m/s^2}=\frac{ m* 10 m/s^2}{10 \ m/s^2}[/tex]

[tex]\frac { 2 \ kg *m/s^2}{10 \ m/s^2}= m[/tex]

The units of meters per second squared cancel.

[tex]\frac { 2 \ kg}{10}= m[/tex]

[tex]0.2 \ kg =m[/tex]

Now, we must convert the mass to grams. There are 1000 grams in 1 kilogram. We can multiply the mass by 1000 or set up a ratio.

[tex]0.2 \ kg * \frac{1000 \ g}{1 \ kg}= 0.2 * 1000 \ g = 200 \ g[/tex]

The toy car's mass is 200 grams.

Answer:

New force = 0.063 N

Explanation:

Given that,

The electric force between two charges is[tex]4.2\times 10^{-2}\ N[/tex]

The formula for the electric force is:

[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]

If the distance between the charges is doubled, r' = 2r and one of the charges is tripled, q₁' = 2q₁, q₂' = 3q₂

Put all the values,

[tex]F'=\dfrac{kq_1'q_2'}{r'^2}\\\\\dfrac{F}{F'}=\dfrac{\dfrac{kq_1q_2}{r^2}}{\dfrac{kq_1'q_2'}{r'^2}}\\\\\dfrac{F}{F'}=\dfrac{\dfrac{q_1\times q_2}{r^2}}{\dfrac{2q_1\times 3q_2}{(2r)^2}}\\\\\dfrac{F}{F'}=\dfrac{4}{6}=\dfrac{2}{3}\\\\F'=\dfrac{3\times 4.2\times 10^{-2}}{2}\\\\F'=0.063\ N[/tex]

So, the new force is 0.063 N.

Answer:

The force becomes 0.0315 N.

Explanation:

Force, F = 4.2 x 10^-2 N

When the distance is doubled, a charge is tripled, Let the force is F'.

The force between the two charges is

[tex]F = \frac{K qq'}{r^2}\\[/tex]

when, q' = 3 q' and r is 2 r so

[tex]F' = \frac{K 3qq'}{4r^2} = \frac{3 F}{4} = \frac {3\times 4.2\times 10^{-2}}{4}=0.0315 N[/tex]

Answer:

1. 7.5 m

2. towards west side

explanation:

I hope it will help you

Answer:

Data:

D = 2400 kg/m³

V = 0.20 m³

M = ?

∴ Density = [tex]\frac{Mass}{Volume}[/tex]

2400 kg/ = [tex]\frac{Mass}{0.2 m^{3} }[/tex]

Mass = 2400 kg/m³ × 0.20 m³

Mass = 480 kg (answer)

Answer:

Therefore, the mass of the block is 480 kg.

when you get the answer please tell me

Answer:

Correct option is C it decreases by a factor of 2

Answer: A - it increases by a factor of 4

Explanation:

Ohm's law is V = IR where V = potential difference, I = current, and R = resistance. Assuming that resistance stays constant (since the question mentioned no change in resistance), we only need to look at "V" and "I" in the equation V = IR.

"V" and "I" are directly proportional. In other words, whatever change happens to "V" will also occur to "I". Since "V" increases by a factor of 4, then "I" will also increase by a factor of 4.

You could also approach this problem by plugging in a change of 4 for the potential difference in the equation: V = I*R.

If we plug in 4V for V, we now have:

4V = I*R

Since the left side increases by a factor of 4, then the right side (only looking at current in this case) will also need to increase by a factor of 4 in order to have the right side stay equal to the left. Therefore, current will also increase by a factor of 4.

Answer:

normal force

tension force

and other example of force

Answer:

Pemain A

Explanation:

Mengingat data berikut;

Kecepatan pemain A = 12 m/s

Kecepatan pemain B = 36 km/h

Untuk menentukan siapa pelari tercepat di antara dua pemain;

Pertama-tama, kita harus mengubah kecepatan menjadi satuan standar pengukuran yang sama.

Jadi, mari kita gunakan pengukuran umum meter per detik.

Konversi:

36 km/h = (36 * 1000)/(60 * 60)

36 km/h = 36000/3600

36 km/h = 10 m/s

Kecepatan pemain B = 10 m/s

Oleh karena itu, dibandingkan dengan kecepatan pemain A; pemain A lebih cepat.

Answer:

Covalent bond.

Explanation:

There are 4 main types of bonds:

Covalent, ionic, metallic, and hydrogen.

Covalent bond: Involves the sharing of pairs of electrons, here the difference between the electronegativity of the atoms is not too large. Covalent bonds usually form an octet of electrons.

Ionic bond: This happens because the electrostatic attraction between the atoms whit very different electronegativities

Hydrogen bond: Electrostatic attractive force between an electronegative atom and a hydrogen atom covalently bonded to another electronegative atom.

Metallic bond: Type of bond that makes the metallic atoms to stay really tightly together. The atoms bond because of the electrostatic atractive force between conduction electrons and positively charged metal ions.

Now, in this case, we have the bond between Nitrogen (electronegativity = 2.0) and Hydrogen (electronegativity = 2.1)

So we can see that:

The elements are not metals, so we can discard metallic bond.

For a hydrogen bond, we need 3 atoms (one of which is hydrogen), here we have two, so we can discard this option.

Ionic bond needs different electronegativities, here the electronegativities are really close together, so the ionic bond can be discarded.

we can conclude that the bond will be a covalent bond.

Answer:

False.

Explanation:

Tensile strength should remain constant, regardless of thickness. For larger cross sections, it can slightly increase because the atoms in the center become more constricted and therefore less responsive to the applied stress.

Answer:

Tensile strength should remain constant, regardless of thickness. For larger cross sections, it can slightly increase because the atoms in the center become more constricted and therefore less responsive to the applied stress.FALSE

Answer: The system of unit which is most convenient for use is the MKS unit.

Explanation:

System of units is defined as the complete set of units which comprises of both the fundamental units and the derived units. The mass, length and time are considered to be the fundamental quantities and their units are called the fundamental units. The systems of unit which are in common use can be compared through their description below:

--> MKS system of unit: In this system of unit, the unit of length is in meter (m). The unit if mass is in kilogram (k). The unit of time is in seconds (s). Hence the name m.k.s system of unit.

--> CGS system of unit: In this system of unit, the unit of length is in centimeter (cm). The unit if mass is in grams (g). The unit of time is in seconds (s). Hence the name c.g.s. system of unit.

--> FPS system of unit: In this system of unit, the unit of length is in foot (Ft). The unit if mass is in pound (Lb). The unit of time is in seconds (s). Hence the name m.k.s system of unit.

The system of unit which is most CONVENIENT for use is the MKS unit. This is because of the introduction of the international system of units (S.I unit). This unit was endorsed by the International Standard Organisation (ISO) to form a logical and interconnected framework for all measurements in science and technology. The MKS system of unit was made the SI units enabling physical quantities to be represented by only one unit.

we call it as well as 100 . so easey

Answer:

10 squared

Explanation:

10 squared

In Depth:

Let have a square that has a side length of 10.

A square four sides are equal and if we find the area of a squared, our formula is

[tex] {s}^{2} [/tex]

Our in this instance,

[tex] {10}^{2} [/tex]

or we call it

[tex]10 \: \: squared[/tex]

Answer:

sodium

Explanation:

it is highly reactive metal.

Answer:

aluminium

Explanation:

In a period , as we go from left to right in a periodic table, atomic number increases .

Differentiating electrons enters into same shell hence the effective nuclear charge decreases .

Hence atomic radius decreases along period.

Conculsion:

Aluminium is the element which has greater atomic radius and sulphur has smaller atomic radius.

Answer:

A certain source of 12V with an internal resistance 1colomb is connected to 5colomb external resistance what is the current

Answer:

Therefore, the gravitational zero points between two planetoids lie at a distance of 3000 m from the center of planetoid 1.

Explanation:

From Newton’s gravitation formula, the expression of the mass (M) of the planet of radius R is given as,

[tex]F_{G} = mg_{1}\\ \left ( \frac{GMm}{{R_{1}}^{2}} \right )=mg_{1}\\\\M= \frac{gR^{2}}{G}\rightarrow \left ( 1 \right )[/tex]

Let's take x to be the distance of the zero gravitational points from the center of the planetoid 1.

Thus, the distance of the zero gravitational points from the center of the planetoid 2 is (D-x).

At zero gravitational point, the gravitational force between the planets and the rocket must be equal.

Answer:

photosynthesis is the process by which green leaves prepare their food in the presence of sunlight,air and water

Answer:

Wavelength = 0.7083 meters

Explanation:

Given the following data;

Speed of wave = 340 m/s

Frequency = 480 Hz

To find how long is the sound wave, we would determine its wavelength;

Mathematically, the wavelength of a waveform is given by the formula;

Wavelength = velocity/frequency

Wavelength = 340/480

Wavelength = 0.7083 meters