Answer:
Solution :
Lithium
Z = 3
P = 3
E = 3 = (2, 1) p=3
A = 7 n=4
P + n = A
3 + n = 7
N = 4

Carbon
Z = 6
P = 6
E = 6 = (2, 4) p=6
A = 12 n=6
P + n = A
6 + n = 12
N = 6
How did reducing the number of
decomposers affect the amount of carbon
dioxide in the ecosystem?
Answer:
As organisms release energy during cellular respiration, carbon dioxide is produced from the carbon in energy storage molecules. ... Carbon dioxide in the biodome decreased because decomposers decreased which means there was a decrease in cellular respiration overall.
btw :
stay safe! :3
What will change if liquid 5.0 molar NiCl2 is added?
When liquid 5.0 molar NiCl₂ is added to 0.3 M of NiCl₂ solution :
Molarity will increase ( A )
What is Molarity ?
Molarity is the measure of the number of moles of solute present per volume of the solution. The addition of 5.0 molar nickel chloride into a 0.3M Nickel chloride solution will lead to an increase in the number of moles of Nickel chloride present in the solution.
Molarity is directly proportional to moles of solute in a solution therefore the molarity of the solution will increase.
Hence we can conclude that When liquid 5.0 molar NiCl₂ is added to 0.3 M of NiCl₂ solution : Molarity will increase.
Learn more about Molarity : https://brainly.com/question/17138838
Determine the number of subatomic particles in bromine-35.
Number of subatomic particles=35+36+35=106
Explanation:
Atomic number=35
Mass number=71
No. of proton p=35
No. of neutron n=71−35=36
No. of electron e=35
Which value could be the y-coordinate for point Q?
215
42
2/13
8/2
Which of the following elements is a metalloid (semimetal)?
C
P
Sb
N
In
Answer:
Sb
Explanation:
Sb (antimony) is an metalloid
The reaction below is performed with 10.0 g of Al and 19.0 g of O2. How many grams of aluminum oxide will be made? 4 Al (s) + 3 O2 (g) → 2 Al2O3 (s)
Answer:
18.89 g of Al₂O₃.
Explanation:
The balanced equation for the reaction is given below:
4Al + 3O₂ —> 2Al₂O₃
Next, we shall determine the masses of Al and O₂ that reacted and the mass of Al₂O₃ produced from the balanced equation. This can be obtained as follow:
Molar mass of Al = 27 g/mol
Mass of Al from the balanced equation = 4 × 27 = 108 g
Molar mass of O₂ = 16 × 2 = 32 g/mol
Mass of O₂ from the balanced = 3 × 32
= 96 g
Molar mass of Al₂O₃ = (27×2) + (16×3)
= 54 + 48
= 102 g/mol
Mass of Al₂O₃ from the balanced equation = 2 × 102 = 204 g
SUMMARY:
From the balanced equation above,
108 g of Al reacted with 96 g of O₂ to produce 204 g of Al₂O₃.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
108 g of Al reacted with 96 g of O₂.
Therefore, 10 g of Al will react with
= (10 × 96)/108 = 8.89 g of O₂.
From the calculation made above, we can see clearly that only 8.89 g out of 19 g of O₂ given, reacted completely with 10 g of Al.
Therefore, Al is the limiting reactant and O₂ is the excess reactant.
Finally, we shall determine the mass of aluminium oxide, Al₂O₃, produced from the reaction.
NOTE: in this case, the limiting reactant will be used because it will give the maximum mass of the aluminium oxide, Al₂O₃ as all of it is consumed in the reaction.
Al is the limiting reactant and the mass of aluminium oxide, Al₂O₃ produced can be obtained as follow:
From the balanced equation above,
108 g of Al reacted to produce 204 g of Al₂O₃.
Therefore, 10 g of Al will react to produce = (10 × 204)/108 = 18.89 g of Al₂O₃.
Thus, 18.89 g of Al₂O₃ were obtained from the reaction.
. Calculate the pH and the pOH of each of the following solutions at 25 °C for which the substances ionize completely:
(a) 0.200 M HCl
(b) 0.0143 M NaOH
(c) 3.0 M HNO3
(d) 0.0031 M Ca(OH)2
Based on the molarity of the solutions;
For 0.200 M HCl; pH = 0.699, pOH = 13.301For 0.0143 M NaOH; pOH = 1.845, pH = 12.16For 3.0 M HNO3; pH = -0.4771, poH = 14.4771For 0.0031 M Ca(OH)2; pOH = 2.21, pH = 11.79What pHand pOH?pH is the negative logarithm to base ten of the hydrogen ions concentration of a solution.
pH = -log[H+]pOH is the negative logarithm to base ten of the hydroxide ions concentration.
pOH = -log[OH-]Also;
pH + pOH = 14For HCl:
pH = -log [H3O+]
pH =-log (0.200)
pH = 0.699
Then;
poH= 14-0.699
pOH = 13.301
For NaOH:
pOH= -log [OH-]
= -log (0.0143)
pOH = 1.845
Then;
pH= 14-poH
= 14- 1.845
pH = 12.16
For HNO3:
pH= -log[H3O+]
=-log(3.0)
= -0.4771
Then;
pOH = 14-9-0.4771
pOH = 14.4771
For [Ca(OH)2]
molarity = 0.0031M
2 moles of OH- are produced
[OH-]= 2 × 0.0031
[OH-] = 0.0062M
pOH = - log[OH-]
=-log(0.0062)
=-log(6.2x10-3)
=-(-2.21)
pOH = 2.21
Then;
pH =14-2.21
pH =11.79
Learn more about pH and pOH at: https://brainly.com/question/13557815
The emission spectrum of hydrogen is shown below. What do the lines in the
spectrum show?
A. Light with wavelengths between 410 nm to 434 nm, 434 to 486 nm, and 486 to 656 nm corresponds with the three energy levels in
hydrogen
B. Only light with wavelengths of 410 nm, 434 nm, 486 nm, and 656 nm is not taken in during energy transitions.
C. Light with wavelengths of 410 nm, 434 nm, 486 nm, and 656 no corresponds with the four energy levels in hydrogen.
D. Light with wavelengths of 410 nm, 434 nm, 486 nm, and 656 nm is given off when electrons fall to lower energy levels.
Answer:
A
Explanation:
Same air has special carakteristik features
The correct pathway for air entering the human respiratory system is _______.
A)nose, trachea, alveoli, bronchi
B)nose, bronchi, trachea, alveoli
C)alveoli, trachea, epiglottis, nose
D)nose, trachea, bronchi, alveoli
Answer: D
Explanation:
An element X has the proton number 18.
The next element in the periodic table is an element Y.
Which statement is correct?
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, the element X with the atomic number of 18 is Argon (Ar) while the next element (element Y) in the periodic table, with atomic number 19, is potassium (K).
Element X is found in the group zero (also called group 18 and elements found therewith are referred to as noble gases) of the periodic table while element Y is found in group 1 (elements found here are referred to as alkali metals).
Element X has a completely filled outermost shell while element Y has one electron in its outermost shell.
Element X is a metal while element Y is a nonmetal.
Nitrogen is a group 15 element. What does being In this group imply about the structure of the nitrogen atom?
Answer:
Nitrogen has 5 valence electrons
Explanation:
nitrogen has it's attoms form triple bonds which are very hard to break
so non-reactive
Which number is equal to the number of protons in the atom
Answer:
The number of electrons is equal to the number of protons
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the electrons number is equal to the number of protons in the atom.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. In an atom, the number of electron or atomic number is s equal to the number of protons in the atom.
Therefore, the electrons number is equal to the number of protons in the atom.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
12. Which nonmetal is the most reactive?
A bromine
B
iodine
C) fluorine
D) chlorine
Answer:
C Fluorine
Explanation:
PLEASE HURRY!
What is the half-life of a 12 g sample of radioisotope that decayed to 6 g in 28
years?
A. 14 years
B. 7 years
C. 56 years
D. 28 years
Answer:
28 years
Explanation:
the information is literally in the question.
What is the Net Ionic equation for this chemical reaction: FeBr2+Na2S=FeS+2NaBr
Answer: Fe(aq)+S(aq)=FeS(s)
Explanation: The Sodium and Bromine are spectator ions because they don't react with anything, you can see this by writing the ionic equation like so:
1.) Molecular formula (given): FeBr2 (aq)+Na2S (aq)= FeS(s)+2NaBr(aq)
Each dissolved FeBr2 breaks up into one Fe with a charge of 2+ and two Br with a negative charge. This gives you:
Fe(aq)+ 2Br(aq)+Na2S(aq)=FeS(s)+2NaBr
2.) Now repeat what was shown with the other compounds in the given molecular formula, and pay attention to the states that each ion is in (solid, liquid, aqueous, gas) because this will give you the ionic equation, which from there you can get rid of any ions that don't change amount or state.
3.) Ionic formula: Fe(aq)+ 2Br(aq)+2 Na(aq)+S (aq)=FeS(s)+2 Na(aq)+2Br(aq)
4.)When you've derived a total ionic equation (above), you'll find that some ions appear on both sides of the equation in equal numbers. For example, in this case two Na cations and two Br anions appear on both sides of the total ionic equation. What does this mean? It means these ions don't participate in the chemical reaction. They're present before and after the reaction. Nothing happens to them. So those are removed and you're left with the net ionic: Fe(aq)+S(aq)=FeS(s)
Hope this helps :)
Explain a polar molecules and give examples
can someone check if i did this right. thank you !!
Answer:
noo
Explanation:
its basic
....................
Answer: acidic
Explanation:
Please help I’ll give brainliest
REACTION TYPE:
Single displacement/Oxidation-reduction
(Hope this helped UwU)
Answer:
Synthesis reaction is the answer
Who is my favourite wrestler?
Answer:
ma herdina thesto wrestling
Đốt cháy hoàn toàn 0,1 mol axit đơn chức cần V lít O2 ở đktc. Thu được 0,3 mol CO2 và 0,2 mol h20 vậy giá trị V là
Answer:
Complete combustion of 0.1mol of monocarboxylic acid requires V litres of O2 at dtc. and the reaction produces 0.3mol of CO2 and 0.2mol of H2O.
What is the value of V?
Explanation:
The balanced chemical equation of the reaction is
[tex]HCOOH+O_2 -> 2CO_2+2H_2O\\[/tex]
1mol. of acid reacts with 1mol of [tex]O_2[/tex] and produce 2mol. of CO2 and 2mol. of H2O.
Given,
0.1mol of acid requires how many litres of oxygen at STP?
0.1mol of acid requires 0.1mol of oxygen.
Since, 1mol of oxygen at STP occupies 22.4L of volume.
Hence, the volume occupied by 0.1mol of oxygen is -- 2.24L
Answer is:
The value of V is 2.24L.
Help I dont know how to do this
Identify the atom oxidized, the atom reduced, the oxidizing agent, and the reducing agent. 2Fe + 3V2O3 -------> Fe2O3 + 6VO
Explanation:
Fe- reducing agent (since it is oxidized to fe203)
v203- oxidizing agent(since it is reduced)
In the given reaction, Fe is the reducing agent and V is the oxidizing agent.
What is a reducing agent?An atom or compound that loses its electrons to other substances in a reduction-oxidation reaction and gets oxidized to a higher valency state is called a reducing agent.
A reducing agent can be defined as one of the reactants of a redox reaction that reduces the other reactant by giving its electrons to the reactant. If the reducing agent can not give away its electrons to others in a reaction, then the reduction reaction cannot occur.
Given, the following chemical reaction:
2Fe + 3V₂O₃ → Fe₂O₃ + 6VO
The V₂O₃ oxidation state of V:
2 x + 3(-2) = 0
2x = 6
x = + 3
The Fe₂O₃ oxidation state of Fe:
2 y + 3 (-2) = 0
2y = 6
y = + 3
The V acts as an oxidizing agent because it accepts one electron to change the oxidation state from +3 to +2.
Fe acts as a reducing agent because it gives out its electrons to change the oxidation state from 0 to +3.
Learn more about reducing agent, here:
brainly.com/question/2890416
#SPJ2
why does shampoo remove hair grese for chemistry acids and alkali
What force is important in the creation of both coal and petroleum?
Explanation:
heat and pressure are two main forces that transform organic matter into fossil fuels
Concentrations-
How many moles of HCI are present in 562.0 ml of a 6.17 M HCI solution?
If possible, show work.
When 11.2 liters of hydrogen gas is made by adding zinc to sulfuric acid, what mass
of zinc is needed?
Zn + H2SO4 -> H2 + ZnSO4
32.7 g Zn
Explanation:
First convert the amount of gas into moles:
11.2 L H2 × (1 mol H2/22.4 L H2) = 0.500 mol H2
Then use the molar ratio to find the amount of zinc necessary to produce the amount of gas above:
0.500 mol H2 × (1 mol Zn/1 mol H2)
= 0.500 mol Zn
Now use the molar mass of zinc to find the number of grams of zinc for the reaction to occur:
0.500 mol Zn × (65.38 g Zn/1 mol Zn)
= 32.7 g Zn
Which of the following issues surrounding nuclear power creates the biggest
concern?
A. Where nuclear power should be used
B. How to deal with the radioactive waste
c. How many power plants should be built
O D. What nuclear power should be used for
Question : Which issue surrounding nuclear power creates the biggest concern?
Answer : How to deal with the radioactive waste (B)
The following issues surrounding nuclear power that create the biggest concern is What nuclear power should be used for?
What is nuclear power?Nuclear powers are those powers that are produced by nuclear reactions. These reactions include nuclear fission, nuclear fusion, and nuclear decay. Nuclear power is currently in use to produce electricity. The reaction uses uranium and plutonium reaction to produce electricity.
Nuclear power is used for generating electricity, and it is necessary to use the correct radioisotopes to produce electricity.
Thus, the correct option is D. What nuclear power should be used for?
Learn more about nuclear power, here:
https://brainly.com/question/9859575
#SPJ2
Consider the following chemical reaction:
HF + NaOH - NaF + H20
Energy must be invested in order for the reaction to proceed.
What bonds must be broken in order for the reaction to proceed.
Select ALL that apply.
A. An ionic bond between sodium and hydroxide.
B. An ionic bond between sodium and fluorine.
C. A covalent bond between sodiume and fluorine.
D. An ionic bond between hydrogen and fluorine.
DE. A covalent bond between hydrogen and fluorine.
DE A covalent bond between hydrogen and oxygen
Answer: The correct options are A and E
Explanation:
A chemical reaction is defined as the reaction in which two or more chemical substances react to form two or more different chemical substances.
A new substance (product) is formed in a chemical reaction when the bonds between the reactants are broken so that the new bonds between the products can be formed.
For a given chemical reaction:
[tex]HF+NaOH\rightarrow NaF+H_2O[/tex]
Here,
HF is a covalent compound as sharing of electrons take place between hydrogen and fluorine atom
NaOH is an ionic compound as a complete transfer of electrons occurs from sodium to hydroxide.
Thus, to form the products, an ionic bond between sodium and hydroxide must be broken coupled with a covalent bond between hydrogen and fluorine.
Hence, the correct options are A and E
Which of the following is an example of nuclear fission?
A. A gamma emitter is used to trace movement of chemicals in the
environment.
B. A radioactive drug that emits electrons is used to treat cancer in a
patient.
O c. Two different isotopes of hydrogen form an isotope of helium on
the sun.
O D. A large radioactive atom breaks into smaller atoms, producing
nuclear energy.
The statement which is an example of nuclear fission is that a large radioactive atom breaks into smaller atoms, producing nuclear energy.
What is nuclear fission?Nuclear fission is a kind of radioactive decay reaction in which an unstable nuclei of an atom will split into smaller stable nuclei by the emission of lots of energy.
Gamma emitter is used inside the human body to trace the information that assists in making a diagnosis by the help of medication.To treat cancer patient high energetic rays like x-rays, gamma-rays are used.Formation of isotope of helium from two different isotopes of hydrogen is an example of nuclear fussion reaction.Hence in nuclear fission a large radioactive atom breaks into smaller atoms, producing nuclear energy.
To know more about nuclear fission, visit the below link:
https://brainly.com/question/3992688
Which statement best supported by the data on the map