Answer:
[tex]q=0.236uC[/tex]
Explanation:
From the question we are told that:
Diameter [tex]d=0.17m[/tex]
Radius [tex]r=0.17/2=>0.085[/tex]
Potential [tex]E=25.0kV[/tex]
Generally the equation for Potential on spere is mathematically given by
[tex]E=\frac{1}{4 \pi e_0}*\frac{q}{r}[/tex]
Therefore
[tex]q=\frac{25*10^3*0.085}{\frac{1}{4 \pi e_0}}[/tex]
Where
[tex]\frac{1}{4 \pi e_0}=9*10^9[/tex]
Therefore
[tex]q=\frac{25*10^3*0.085}{(9*10^9}}[/tex]
[tex]q=0.236uC[/tex]
A 0.15-mm-wide slit is illuminated by light of wavelength 462 nm. Consider a point P on a viewing screen on which the diffraction pattern of the slit is viewed; the point is at 26.9° from the central axis of the slit. What is the phase difference between the Huygens' wavelets arriving at P from the top and midpoint of the slit?
Answer:
[tex]\triangle \phi=461.5rad[/tex]
Explanation:
From the question we are told that:
Silt width [tex]w=0.15=>0.1510^{-3}[/tex]
Wavelength [tex]\lambda=462nm=462*10^{-9}[/tex]
Angle [tex]\theta=26.9[/tex]
Generally the equation for Phase difference is mathematically given by
[tex]\triangle \phi=\frac{2 \pi}{\lambda}(\frac{wsin\theta }{2})[/tex]
[tex]\triangle \phi=\frac{2 \pi}{462*10^{-9}}(\frac{0.1510^{-3}*sin 26.9 }{2})[/tex]
[tex]\triangle \phi=461.5rad[/tex]
[tex]\triangle \phi=146.89\pi[/tex]
Which of the following is NOT TRUE about food irradiation?
O It is practiced around the world.
O It leaves food mildly radioactive.
It is effective in killing microorganisms.
o It destroys microorganisms without cooking.
Answer:
It is practiced around the world .
The statement, that is, food irradiation leaves food mildly radioactive is not true.
• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.
• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.
• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.
• Food irradiation has been approved in over forty countries and is almost practiced globally.
Thus, the statement, that is, it leaves food mildly radioactive is incorrect.
To know more about:
https://brainly.com/question/19586033
A particle is moving on a circular path of radius R. What will be its displacement and distance covered after 3 ½ round?
(please help fast)
Answer:
2r or diameter
Explanation:
After 3 1/2 rounds it will end up on the other side of the circle and displacement will be 2 x the radius = d
Distance = 7 π R
Displacement = 2 R from the starting point directed through the center of the circle
When extrication will involve cutting the roof off a vehicle, stabilization of the vehicle should include:
Answer:
Deflating the tires by pulling the valve stems
Explanation:
When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.
[tex]what \: is \: mirror \: {?}[/tex]
Match the synthetic materials with the processes used to make them.
Un proton penetra perpendiculares en un campo magnetico de 5 teslas con una velocidad de 2.10 m/s calcula
Answer:
The magnetic force acting on the proton is 1.68 x 10^-18 N.
Explanation:
magnetic field, B = 5 T
speed , v = 2.1 m/s
charge q = 1.6 x 10^-19 C
Angle, A = 90 degree
The magnetic force on the charge particle is given by
[tex]F = q v B sin A\\\\F = 1.6\times 10^{-19}\times 2.1\times 5\times sin 90\\\\F = 1.68\times 10^{-18} N[/tex]
a cyclist has a combined mass of 88 kg and a combined weight of 862.4 then accelerates at 1.2m/s after 2 seconds he reaches a of 2.4m/s what is his momentum at this point
Answer:
shushhhgggvvv vgfxgh
Explanation:
gey laahhg
Describe the resistance through a
diode
Explanation:
A diode is an electrical element which offers the flow of current freely in one direction with very less resistance.
The given figure depicts a diode in forward bias, where the p-side and the n-side of the diode are connected to positive and negative terminals respectively. In such a case the current flows from the p-side to n-side of the p-n junction very easily and the value of the current increases rapidly after a certain voltage, this voltage is called threshold voltage.
We can deduce from the graph that the resistance of the diode reduces with increase in voltage. As resistance is given by the formula:
[tex]R=\frac{V}{i}[/tex]
Calculate surface tension of an enlarged radius of 4cm to 6cm and amount of work necessary for enlargement was 1.5×10^-4 joules
Answer:
[tex]T=7.5*10^{-5}[/tex]
Explanation:
From the question we are told that:
Radius [tex]r=2cm[/tex]
Work done [tex]W=1.5×10^-4 joules[/tex]
Generally the equation for Work done is mathematically given by
[tex]W=T.dA[/tex]
Therefore
[tex]T=\frac{W}{dr}[/tex]
[tex]T=\frac{1.5*10^{-4}}{2}[/tex]
[tex]T=7.5*10^{-5}[/tex]
In a science museum, a 130 kg brass pendulum bob swings at the end of a 14.4 m -long wire. The pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.7 m to the side and releasing it. Because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s. You may want to review (Pages 405 - 407) . Part A At exactly 12:00 noon, how many oscillations will the pendulum have completed
Answer:
The time in which the pendulum does a complete revolution is called the period of the pendulum.
Remember that the period of a pendulum is written as:
T = 2*pi*√(L/g)
where:
L = length of the pendulum
pi = 3.14
g = 9.8 m/s^2
Here we know that L = 14.4m
Then the period of the pendulum will be:
T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s
So one complete oscillation takes 7.61 seconds.
We know that the pendulum starts moving at 8:00 am
We want to know 12:00 noon, which is four hours after the pendulum starts moving.
So, we want to know how many complete oscillations happen in a timelapse of 4 hours.
Each oscillation takes 7.61 seconds.
The total number of oscillations will be the quotient between the total time (4 hours) and the period.
First we need to write both of these in the same units, we know that 1 hour = 3600 seconds
then:
4 hours = 4*(3600 seconds) = 14,400 s
The total number of oscillations in that time frame is:
N = 14,400s/7.61s = 1,892.25
Rounding to the next whole number, we have:
N = 1,892
The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.
What is meant by measurement? l
Answer:
The action of measuring the size, length, or amount of something, as established is called measurement.
Explanation:
“Measurement” is the act of determining a target's size, length, weight, capacity, or other aspect. ... To use measurement tools as necessary. It is also appropriate to say that measurement is done by a worker using a measurement system, and instrumentation is done by a technician.
Mary drives at a speed of 35 mph (mile/hour). How long does it take for her to drive 98 miles?
__ hours
Answer:
2.8 hours
Explanation:
98 ÷ 35 = 2.8
Amy throws a softball through the air. What are the different forces acting on the ball while it’s in the air?
The softball experiences
force as a result of Amy’s throw. As the ball moves, it experiences
from the air it passes through. It also experiences a downward pull because of
.
Answer:
1.the friction of air, gravity2.gravity
Answer:
The softball experiences an applied force as a result of Amy’s throw. As the ball moves, it experiences drag from the air it passes through. It also experiences a downward pull because of gravity.
Explanation:
Plato
A car going around a curve with a radius of 15m experiences a centripetal acceleration of 2.5 m/s2. How fast is the car going?
0.17m/a
38 m/s
6.1 m/s
6.0 m/s
Answer:
Explanation:
The formula for centripetal acceleration is
[tex]a_c=\frac{v^2}{r}[/tex] . Filling in:
[tex]2.5=\frac{v^2}{15}[/tex] and
[tex]v=\sqrt{2.5(15)}[/tex] so
v = 6.1 m/s
Use the ideal gas law, PV=nRT to solve. R=0.0821
If I have 15 moles of gas at a temperature of 299K and a volume of 92L, what is the pressure of the gas?
Answer:
The pressure of the gas=4.002 atm
Explanation:
We are given that
R=0.0821
Number of moles, n=15
Temperature, T=299 K
Volume of gas, V=92 L
We have to find the pressure of the gas.
[tex]PV=nRT[/tex]
Substitute the values
[tex]P\times 92=15\times 0.0821\times 299[/tex]
[tex]P=\frac{15\times 0.0821\times 299}{92}[/tex]
[tex]P=4.002 atm[/tex]
Hence, the pressure of the gas=4.002 atm
Answer:
According to the ideal gas law equation,
PV = nRT (here, P = 5.5 atm, V = 10L, T = 298K, R = 0.0821 atmL/mol K)
or, n = RT/PV = (0.0821 X 298)/(5.5 X 10) = 0.44 moles of He gas
Explanation:
orange light has a wavelength of 600nm. calculate the frequency if the speed of light in vacuum
the correct answer is ---- 122
When applying an arm sling, the injured arm's hand should be placed in a ________ position in the sling, and above the level of the elbow.
Answer:
The answer is "thumb-up".
Explanation:
The sling often called the arm sling, is a solution for preventing either shoulder or elbow motion during healing. A triangle bandage could be constructed.
A sling is a strong tissue loop that descends from the head to hold the forearm. The armrests in the sling bent also at the elbow.
The injured hand of the forearm should be positioned inside the pin position in the joint above the level of the elbow when putting the forearm sling.
5- Clasifica los siguientes cambios de la materia, anotando delante de cada uno cambio físico (F) o cambio químico (Q): • Disolver azúcar en agua • Freir una chuleta • Arrugar un papel • El proceso de la digestión • Secar la ropa al sol • Congelar una paleta de agua • Hacer un avión de papel • Oxidación del cobre • Romper un lápiz • Prender fuegos artificiales • Excavar un hoyo • Quemar basura
Answer:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
Explanation:
A continuación, veremos que representa cada caso:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team
Answer:
the force of resistance on the right team is 360 N
Explanation:
Given;
force of the left team, = 1000 N
total mass of the right team, m = 300 kg
acceleration of the right team, a = 1.2 m/s²
The force of resistance of the right team is calculated as;
Force = mass x acceleration
Force, F = 300 x 1.2
Force = 360 N
Therefore, the force of resistance on the right team is 360 N
Question 23 of 23
Suppose a current flows through a copper wire. Which two things occur?
O A. The field is parallel to the direction of flow of the current.
B. An electric field forms around the wire.
OC. A magnetic field forms around the wire.
U
D. The field is perpendicular to the direction of flow of the current.
SUBM
Answer:
The field is parallel to the direction of flow of the current.
The electric motor in the car is powered by a battery.
To charge the battery, the car is plugged into the mains supply at 230 V
The power used to charge the battery is 6.9 kW
Calculate the current used to charge the battery.
Answer:
I = 30 A.
Explanation:
Given that,
The voltage of the battery, V = 230 V
Power used to charge the battery, P = 6.9 kW
We need to find the current used to charge the battery. The formula for the power is given by :
P = VI
Where
I is current
So,
So, the required current is 30 A.
rainfall occurs on the earth due to effect of gravity
Answer:
TrueBecause Gravity is the force of attraction between two objects, and Earth's gravity pulls matter downward, toward its center. It pulls precipitation down from clouds and pulls water downhill. Gravity also moves air and ocean water. ... Gravity pulls denser air and water downward, forcing less dense air and water to move upward.Carryonlearning
The chart shows the speed at which light travels through different media.
In which medium would light have the longest wavelength?
- Water
- Air
- Glass
- Diamond
Answer:
Air.
Explanation:
To know which option is correct, let us consider the relationship between velocity and the wavelength of a wave. This is illustrated below:
Velocity, wavelength and frequency are related by the following equation:
Velocity = wavelength × frequency
v = λf
From the equation above, we can see clearly that the velocity is directly proportional to the wavelength.
This means that an increase in the wavelength will lead to an increase in the velocity and also, a decrease in the wavelength will lead to a decrease in the velocity.
Now, considering the table given in the question above, we can see that the wave has a higher speed in air. This simply means that the wave will also have a higher wavelength in air.
Thus, the correct answer to the question is: air
An airplane with a ground speed of 550 km/hr travels along a heading of 30 degrees n of w at that high altitude there is a powerful 210 km/hr wind
Answer:
Determine the direction that the pilot is aiming the plane.
Explanation:
The acceleration of the car with two washers added to the string would be
Answer:
[tex]a=0.33\ m/s^2[/tex]
Explanation:
For washer 2,
v₁ = 0.13 m/s
v₂ = 0.36 m/s
t₁ = 1.92
t₂ = 2.61
We need to find the acceleration of waster 2.
[tex]a=\dfrac{v_2-v_1}{t_2-t_1}\\\\a=\dfrac{0.36-0.13}{2.61-1.92}\\\\a=\dfrac{0.23}{0.69}\\\\a=0.33\ m/s^2[/tex]
So, the acceleration of washer 2 is [tex]0.33\ m/s^2[/tex].
Answer:
.33
Explanation:
A wave travels at 330m/s^-1. the wavelength is found to be 2.4m.
Calculate the period of oscillation of a article in the medium transmitting the waves.
The frequency of oscillations of the source transmitting the wave
Answer: frequency 137.5
Time period 0.01sec
Explanation:
When your vehicle turns a corner, the tracks made by the rear tires are always: a) Outside of those made by your front tires b) Inside of those made by your front tires c) On top of those made by your front tires d) None are correct
Answer:
I think it's D
Explanation:
because I have seen the tracks of the tires
A box has a mass of 4kg and surface area 4m². Calculate the
pressure exerted by the box on the floor.
Answer:
10 pa
Explanation:
4kg* 10 (or 9.8m/s2) = 40
40N /4m2 =10
A shell is fired at an initial speed of 2500 m/s at an initial angle of 45 degrees. Find the shell's horizontal range and the amount of time the shell is in motion. (note that because it is fired from the ground to the ground, they displacement = 0.)
Answer:
d= 637323 meters
t= 360.5 seconds
Answer:
Explanation:
Since the height from which the shell was fired is the same as the height at which it lands (on the ground, to be specific), we will use the range equation. That is the only time you CAN use the range equation (when the initial height and the final height are exactly the same). The range equation is:
[tex]r=\frac{v_0^2sin(2\theta)}{g}[/tex] where v0 is the initial velocity, theta is the angle, and g is the pull of gravity (NOT negative). Filling in:
[tex]r=\frac{(1500)^2sin(9.0*10^1)}{9.8}[/tex] so, doing all that math gives us:
r = 6.4 × 10⁵ meters
