Answer:
0.37 M
Explanation:
An initial solution of orange juice has a solute concentration of 0.50 M and a volume of 155.0 mL. What is the final solute concentration of the juice after its been diluted with 52.5mL of water?
the old molarity was 0.50 M, and a volume of 1555.0 ml
the new volume is a total of 155.0 ml + 52.5 ml =207.5 ml
so the new molarity is (155.0/207.5) X 0.50 M = 0.37 M
What is the mass/volume percent of a solution containing 32.6g of CaCl2 in 375mL of water?
element Q,X, and Z are in the same group on the periodic table and are listed in order of increasing atomic number.The melting point of element Q is -219 Celsius and the melting point of element Z is -7 celsius. Which temperature is closest to the melting point of element X
Answer:
Very low ionization energy: metal bonds easily: group 1, or maybe 2 low melting.
Explanation:
giving brainly for correct answer! :)
Answer:
Mass is the amount of matter in an object
Answer:
Mass
Explanation:
matter is weighed by the mass of an object
nkkljihghjhytuyftghvnvm
jkhjkhjkh
Answer:
seriously ....,........
I don't like chemistry
Mixture of a 25.00 mL aliquot of the sample solution with 5.00 mL of a 0.250 ppm warfarin standard yielded a solution with an intensity of 670. Calculate the percentage of warfarin in the sample.
Answer:
750
Explanation:
When performing an experiment, the following footwear is best
Answer:
sneakers
Explanation:
Answer:
closed toe shoe
Explanation:
becusae if a cemcal spills it cant hurt your feet
The electron configuration of an element is shown below.
1s22s22p63s23p6
Name the group this element belongs to in the periodic table and explain your answer.
Based on the electron configuration, write one chemical property of this element.
The element belongs to group 18 and the element is chemically inert.
What is electron configuration?The term electron configuration refers to the arrangement of electrons in an atom. The electron configuration of an atom can show the group to which it belongs in the periodic table.
Given the configuration, 1s22s22p63s23p6 the element belongs to group 18 and the element is chemically inert.
Learn more about electron configuration: https://brainly.com/question/5524513
Aanlyze the potential energy diagram of the
reaction shown.
Which statements about the reaction are true?
Select all that apply.
The reaction is exothermic
The reaction is endothermic
The equation shows that 891 kJ of energy are
released as a product.
The equation shows that 891 kJ of energy are
absorbed as a reactant.
The graph shows that the reactants have greater potential energy than the products.
The answer is a,c,e
Answer:
A: The reaction is exothermic
C: The equation shows that 891 kJ of energy are released as a product.
E: The graph shows that the reactants have greater potential energy than the products.
Explanation:
The statement about the reaction is true:
A: The reaction is exothermic
C: The equation shows that 891 kJ of energy is released as a product.
E: The graph shows that the reactants have greater potential energy than the products.
What is potential energy?Potential energy is the energy that is saved in the body. It is used in the work and when convert into kinetic energy.
A moving item fundamentally possesses kinetic energy. Kinetic energy would therefore be created as a result of an object moving or an elastic band being released since the released object exhibits motion.
Therefore, the correct option is A: The reaction is exothermic, C: The equation shows that 891 kJ of energy is released as a product, and E: The graph shows that the reactants have greater potential energy than the products.
To learn more about potential energy, refer to the link:
https://brainly.com/question/15764612
#SPJ2
what is a nucleus and what are the functions?
Write the equation that represents what happens when barium hydroxide dissolves in water. You do not need to include water as a reactant in the equation.
Barium hydroxide dissolves in water according to the equation: [tex]Ba (OH)_2 (aq) ---> Ba^2^+(aq) + 2OH^-(aq)[/tex]
When barium hydroxide is dissolved in water, it dissociates into its component ions completely. In other words, barium hydroxide dissociates into barium and hydroxyl ions just like every other strong base.
The equation for the dissociation in water is as follows:
[tex]Ba (OH)_2 (aq) ---> Ba^2^+(aq) + 2OH^-(aq)[/tex]
More on barium hydroxide can be found here: https://brainly.com/question/10094403
Answer:
Ba(OH)2 (s) --> Ba2+ (aq) + 2OH- (aq)
Explanation:
Barium hydroxide is a solid before it dissolves in water, and then becomes an aqueous solution during the reaction.
A \pu{1.60 g}1.60 g1, point, 60, space, g calcium supplement contains 37.8\%37.8%37, point, 8, percent \ce{Ca}CaC, a by mass. The calcium is present in the supplement as \ce{CaCO3}(s)CaCOX 3 (s) (molar mass \pu{100.09 g/mol}100.09 g/mol100, point, 09, space, g, slash, m, o, l). How many grams of \ce{CaCO3}(s)CaCOX 3 (s) are in the calcium supplement?
A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.
We want to calculate the mass of CaCO₃ in a 1.60 g supplement. We need to consider the following relationships.
The mass percent of Ca is 37.8%, that is, there are 37.8 g of Ca every 100 g of supplement.The molar mass of Ca is 40.08 g/mol.The molar ratio of Ca to CaCO₃ is 1:1.The molar mass of CaCO₃ is 100.09 g/mol.[tex]1.60gSup \times \frac{37.8gCa}{100gSup} \times \frac{1molCa}{40.08gCa} \times \frac{1molCaCO_3}{1molCa} \times \frac{100.09gCaCO_3}{1molCaCO_3} = 1.51gCaCO_3[/tex]
A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.
Learn more: https://brainly.com/question/14990953
A 1.60 g calcium supplement contains 37.8% Ca by mass. The calcium is present in the supplement as CaCO₃(s) (molar mass 100.09 g/mol). How many grams of CaCO₃(s) are in the calcium supplement?
ARTICLE:
When Olafur Eliasson and Frederik Ottesen heard that more than 1 billion people on Earth don’t have access to electricity, they wanted to help. In many places, lack of electricity means students can’t study after dark and families can’t cook after the sun goes down. It’s also harder for doctors and nurses to treat patients without good lighting. Eliasson and Ottesen decided to invent a solar lamp that would provide light without costing a lot of money, polluting the air, or causing fires.
Their solution? The Little Sun lamp is a sun-shaped light with a light bulb on one side and a solar panel on the other. The Little Sun lamp uses energy to provide light to people who need it, but the Little Sun doesn’t make its own energy. To run, the lamp needs to get energy from somewhere else. In this case, that source of energy is the sun. The solar panel on the back of the lamp converts light energy from the sun into potential energy that can be stored in a battery and used later to make the light bulb shine. Little Sun lamps charge in the sun during the day and provide light at night, allowing people to study, cook, work, and take care of other things even after the sun sets. They’re inexpensive, don’t pollute, and don’t cause fires.
questions: 2) How does the Little Sun Lamp help people around the world get light?
3) How does the Little Sun Lamp use energy from the sun to make the light bulb shine?
Answer:
got light to charge from the sun
Explanation:
they did it so that people don't pollute the ozone layer and thats why they invent that and it help them in every way
pls help i am in 8th grade k12
Answer:
zzxdczxc V
Explanation:
what i compound is
FeI2
Answer:
iodide
Explanation:
Answer:
Iron(II) iodide
Explanation:
Select all the correct answers.
To formulate hypotheses and construct theories, astronomers analyze data. This analysis helps them find trends that may exist. Which two statements does the data in this table support? If you’re not sure, take a guess.
A. The farther a planet is from the Sun, the longer its orbital period is.
B. Planets with a greater diameter have longer days.
C. The closer a planet is to the Sun, the greater its axial tilt is.
D. Planets with greater mass tend to have more moons.
Answer: A. The farther a planet is from the Sun, the longer its orbital period is, and D. Planets with greater mass tend to have more moons.
Explanation: trust
You are given a water-soluble compound X. Describe how you would determine whether it is an electrolyte or a nonelectrolyte. If it is an electrolyte, how would you determine whether it is strong or weak?
If the compound contains a metal cation or an ammonium cation, then the compound is ionic. Otherwise it is a molecular compound. Ionic compounds that dissociate completely in water are strong electrolytes. ... Molecular compounds that are weak acids are weak electrolytes.
CORRECT ME IF IM WRONG
HOPE IT HELPS:(
An electrolyte substances which, when dissolved in aqueous solution, dissociates into cations (+ ions) and anions (- ions).
Electrolytes can either be a weak or strong electrolyte depending on whether they can dissociate partially or completely.
Therefore, regarding the water-soluble compound X:
it is an electrolyte if it dissociates into its respective ions in an aqueous solutionThe compound is a weak or strong electrolyte depending on whether it dissociates partially or completely.Learn more about electrolytes at: https://brainly.com/question/14566383
#SPJ2
Convert 21 grams of radon into atoms of radon.
Answer:
The atomic mass of radon is 222.
Explanation:
. That means that one mole of radon weighs 222 grams (222 grams/moles). We can therefore make the following equation:
Grams × (1/222) = Moles of Radon
Please help I’m so lost!! Chemistry
Answer:
i will help you
Explanation:
if the reactions have more energy than the products this means that there is some energy that given outside and this reaction will called an exothermic reaction.
But if the reaction have less energy than the products this means that there is some energy that taken from outside and this reaction is called an endothermic reaction.
which of the following substances will cross the cell membrance through osomosis
Answer:Water, carbon dioxide, and oxygen are among the few simple molecules that can cross the cell membrane by diffusion (or a type of diffusion known as osmosis ).
Explanation:
what is the functional group and homologous series of ethyl butyrate?
Answer:
Functional group: ROR'
Homologous series: ester [C6H12O2]
Mark brainliest please
Given: 800 mL of 2.5 M NaCl. Find grams of NaCl needed
Answer:
Answer: molar mass of NaCl is 58.5 gm/mol. This refers to the fact that 1 mole of NaCl weighs 58.5 gram.
Explanation:
in metallurgy hydrogen reduce metal oxides to
Answer:
Considering the above series we can say that hydrogen can reduce only oxides of copper, mercury, silver and gold as these metals are less reactive than hydrogen.
What is the mole ratio between FeCl3 and Fe(C5H7O3)3 ?
Answer: 162.2 g FeCl3. mL of soln = 0.07028 mol FeCl3x ... mol FeCl3 = mol Fe(OH)3 = 0.01291 mol ... (a) MaVa = MbVb since HCl and KOH react in a 1:1 molar ratio.
Explanation:
The molarity of an aqueous solution of CaCl is defined as the
Answer:
Molarity of aqueous solution of CaCl2 can be defined as moles of CaCl2 per litre of solution
Why are coal, oil and natural gas called fossil fuels
How many peaks will you observe in the 13C spectrum of cyclohexane ?
1 1 - incorrect
3
6
3 peaks
Explanation:
You can do this perfectly well without referring to chemical shift tables at all. In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.
What happened a when you try to layer a more-dense solution on top of a less-dense solution
Answer:
the more dense solution will sink to the bottom the less dense solution will go to the top
Answer:
Explanation:The density of a liquid determines whether it will float on or sink in another liquid. A liquid will float if it is less dense than the liquid it is placed in. A liquid will sink if it is more dense than the liquid it is placed in.
Density of a liquid determines how it will layer (heaviest to lightest). If the liquid us least dense it float to the bottom. Layers will remain separated because each liquid is actually floating on top of the more dense liquid beneath it.
which best describes how heat energy moves within the system?
Answer: B
Heat always travels from warmer areas to cooler areas in the form of radiation or convection currents due to the temperature difference. You could kind of think of this movement like diffusion: travelling from a higher concentration to a lower one (if you take biology). This is how a gas heats up a pan on the stove or a radiator warms a room
An exothermic reaction releases 86.5 kJ. How many kilocalories of
energy are released?
Which of the following corresponds to an alpha particle?
A. 1/4He
B. 3/2He
C. 2/2H
D. 4/2He
Answer:
D. 4/2 He corresponds to an alpha particle.
