an object falls freely from rest the total distance covered by it in 2s will be​

Answers

Answer 1

Answer:

Distance, S = 19.6 meters

Explanation:

Given the following data;

Time = 2 seconds

We know that acceleration due to gravity is equal to 9.8 m/s².

Also, the initial velocity of the object is equal to zero because it's starting from rest.

To find the total distance covered by the object, we would use the second equation of motion;

[tex] S = ut + \frac {1}{2}at^{2}[/tex]

Where;

S represents the displacement or height measured in meters. u represents the initial velocity measured in meters per seconds. t represents the time measured in seconds. a represents acceleration measured in meters per seconds square.

Substituting into the equation, we have;

[tex] S = 0*2 + \frac {1}{2}*(9.8)*2^{2}[/tex]

[tex] S = 0 + 4.9*4[/tex]

[tex] S = 4.9*4 [/tex]

Distance, S = 19.6 meters

Therefore, the total distance covered by the object is 19.6 meters.


Related Questions

Khối lượng ban đầu của mặt trời m⊙ = 2 × 1030 kg trong đó có 71 % là
hydrogen. Trong 5×10^9 năm đầu tiên, mặt trời phát ra năng lượng với công suất
3.86 × 10^26 W, nhờ phản ứng
4p → 4+2He + 2e
+ 2νe + 26 MeV
trong đó bốn proton tổng hợp thành hạt α và tỏa ra năng lượng 26 MeV. Hãy
xác định
a) số hạt proton của mặt trời tại thời điểm ban đầu.
b) số hạt proton của mặt trời tham gia phản ứng trong 1 năm.
c) số hạt proton còn lại trong mặt trời sau 5 × 10^9 năm.
d) thời gian để tiêu thụ hết 10 % số hạt proton còn lại của mặt trời

Answers

Answer:

jsgssbvwsvs

Explanation:

ifmd understand

Azam had a metal pencil box and a wooden block on his table. When he touched them, the pencil box felt colder compared to the wooden block. When he measured their temperatures using a thermometer, he found that both the objects were at the same temperatures. What could be the reason for Azam to 'feel' that the pencil box was cooler? * (1 Point) Air around the pencil box was at a lower temperature which made the pencil box colder Wood produces heat and so, must have been at a higher temperature than the pencil box As metal is a better conductor of heat, it drew away heat from his hand faster than the wooden block. Metals are always at a lower temperature than other substances and so, there has been an error in measurement​

Answers

The third choice is the correct explanation. Don't make me type it all out on my phone.

A circular wire loop is placed near a long, straight, current-carrying wire in which the current is either increasing or decreasing. Draw the situations in which the induced current in the loop counterclockwise?

Answers

Answer:

The induced current is counter clockwise if the current is decreasing and towards right.

Explanation:

When the current is decreasing in the wire, the direction of magnetic field at the center of the loop is outwards to the plane of paper which is given by the Maxwell's right hand thumb rule. The magnetic field is decreasing in nature.

So according to the Lenz's law, the induced current is such that which opposes the cause of its production, so that the induced current is counter clockwise.

human activities that interfere with distribution of natural resources are contributing to the increase of earthquake risk.

Answers

Answer:

Changes in climate conditions, especially the warming of global temperatures increases the likelihood of weather-related natural disasters. ... This is most visible when seen through changes in the intensity and frequency of droughts, storms, floods, extreme temperatures and wildfires.

Mark Brainliest please

Answer :

A study published in the journal Seismological Research Letters this week identified 730 sites where human activity caused earthquakes over the past 150 years. And while we've long known that people can influence seismic activity, researchers were surprised to find that human activity has induced earthquakes with magnitudes as high as 7.9—and that the number of earthquakes is clearly rising in some regions of the world.

The effects of human-induced earthquakes may be similar to those created by nature, but are often seen in regions with little or no previous seismic activity. Most natural earthquakes happen along fault lines, which are commonly (but not exclusively) found where tectonic plates converge. But earthquakes triggered by human activity can occur far from the edges of tectonic plates.


Exactly what causes each induced earthquake depends on the type of human activity.

According to the report's data, found on a publicly accessible database, mining accounted for the highest number of human-induced earthquakes worldwide (many earthquakes clustered around 271 sites). The removal of material from the earth can cause instability, leading to sudden collapses that trigger earthquakes.

Multiple earthquakes at 167 sites—and by far the deadliest ones—were triggered by what the report calls water reservoir impoundment, or dam building. (See the power of dams and dam removal.)

In 2008, an estimated 80,000 people died or went missing following a 7.9 earthquake in China's Sichuan province. Scientists believe it was triggered by the weight of 320 million tons of water that had been collected in the Zipingpu Reservoir—over a well-known fault line.

In the U.S., the conversation around human-induced earthquakes has largely centered around fracking for oil and natural gas, given the rapid spread of the technology in many states. According to the U.S. Geological Survey, fracking can induce seismic activity, both directly and from disposing of wastewater used in the process—the byproduct of water, sand, and chemicals used to hydraulically fracture hydrocarbons from rock. That high-pressure wastewater can crack rocks and lubricate faults.

A bullet of mass 0.5 kg is moving horizontally with a speed of 50 m/s when it hits a block of mass 3 kg that is at rest on a horizontal surface with a coefficient of friction of 0.2. After the collision the bullet becomes embedded in the block. How much work is being dne by bullet?

Answers

Answer:

Work done by the bullet is 612.26 J.

Explanation:

mass of bullet, m = 0.5 kg

initial velocity of bullet, u = 50 m/s

coefficient of friction = 0.2

mass of block, M = 3 kg

let the final speed of the bullet block system is v.

use conservation of momentum

Momentum of bullet + momentum of block = momentum of bullet block system

0.5 x 50 + 3 x 0 = (3 + 0.5) v

v = 7.14 m/s

let the stopping distance is

The work done is given by change in kinetic energy of bullet

initial kinetic energy of bullet, K =  0.5 x 0.5 x 50 x 50 = 625 J

Final kinetic energy of bullet, K' = 0.5 x 0.5 x 7.14 x 7.14 = 12.74 J

So, the work done by the bullet

W = 625 - 12.74 = 612.26 J  

If the car falls down the side of the cliff, what is happening to the gravitational potential energy of the falling car? (Assume the bottom of the cliff is zero)

Answers

Answer:

Sentences with many clauses and phrases are difficult to understand because the clauses and phrases typically _____.

modify other clauses and phrases in the sentence

refer to other sentences in the passage

make it hard to determine where the sentence ends

change the intended meaning of the sentence

Explanation:

which describes a homogeneous mixture​

Answers

Answer:

A homogeneous mixture is a type of mixture in which the composition is uniform and every part of the solution has the same properties. Example, air

Explanation:

Determine the values of m and n when the following average magnetic field strength of the Earth is written in scientific notation: 0.0000451 T. Enter m and n, separated by commas.

Answers

Answer:

B = 4.51×10⁻⁵ T

Explanation:

Given that,

The average magnetic field strength of the Earth is 0.0000451 T.

We need to write the value in the form of scientific notation. Any number in scientific notation is written as follows :

N=a×bⁿ

Where

n is any integer and a is a real no

So,

0.0000451 = 4.51×10⁻⁵ T

So, the required answer is equal to 4.51×10⁻⁵ T.

When you irradiate a metal with light of wavelength 433 nm in an investigation of the photoelectric effect, you discover that a potential difference of 1.43 V is needed to reduce the current to zero. What is the energy of a photon of this light in electron volts? energy of a photon: Find the work function of the irradiated metal in electron volts. work function:

Answers

Answer:

The right solution is:

(a) 2.87 eV

(b) 1.4375 eV

Explanation:

Given:

Wavelength,

= 433 nm

Potential difference,

= 1.43 V

Now,

(a)

The energy of photon will be:

E = [tex]\frac{6.626\times 10^{-34}\times 3\times 10^8}{433\times 10^{-9}}[/tex]

  = [tex]4.59\times 10^{-19} \ J[/tex]

or,

  = [tex]\frac{4.59\times 10^{-19}}{1.6\times 10^{-19}}[/tex]

  = [tex]2.87 \ eV[/tex]

(b)

As we know,

⇒ [tex]Vq=\frac{hc}{\lambda}-\Phi_0[/tex]

By substituting the values, we get

⇒ [tex]1.43\times 1.6\times 10^{19}=\frac{6.626\times 10^{-34}\times 3\times 10^8}{433\times 10^{-9}}-\Phi_0[/tex]

⇒                       [tex]\Phi_0=2.3\times 10^{-19} \ J[/tex]

or,

⇒                            [tex]=\frac{2.3\times 10^{-19}}{1.6\times 10^{-19}}[/tex]

⇒                            [tex]=1.4375 \ eV[/tex]


What is a reasonable measurement for the distance to Neptune?
30 light years
30 kilometers
30 parsecs
30 Astronomical Units

Answers

Answer:

30 kilometers is a reasonable measurement

Which one is the dependent variable in distance, force, or work

Answers

Answer:

Distance

Explanation:

Work can be defined as the energy transferred to a physical object by exertion of a force on the object to cause a displacement of the object. Thus, work is typically done when a person or simple machine move an object over a distance through the application of a force.

Mathematically, work done is given by the formula;

[tex] W = F * d[/tex]

Where,

W is the work done

F represents the force acting on a body.

d represents the distance covered by the body.

A dependent variable is the event expected to change when an independent variable is manipulated.

Hence, distance is the dependent variable because its value changes with respect to the amount of force exerted on an object.

In a 2-dimensional Cartesian coordinate system the y-component of a given vector is equal to that vector's magnitude multiplied by which trigonometric function, with respect to the angle between vector and y-axis?

a. sine
b. cosine
c. tangent
d. cotangent

Answers

Answer:

Option b, cosine.

Explanation:

Below you can see an image that illustrates this situation.

Remember that for a triangle rectangle with a given angle θ, we have:

Cos(θ) = (adjacent cathetus)/(hypotenuse)

In the image, you can see a vector of magnitude M, and the angle θ defined between the vector and the positive y-axis.

In this case, the y-component is the adjacent cathetus and the hypotenuse is the magnitude of the vector.

Then we will have:

Cos(θ) = (adjacent cathetus)/(hypotenuse) = y/M

solving that for y, we get:

y = Cos(θ)*M

Then the y-component is the vector's magnitude multiplied by the cosine of the angle between the vector and the y-axis.

The correct option is b.

Answer:

(b) cosine

Explanation:

In a 2-dimensional Cartesian coordinate system, a vector has a x-component and/or a y-component. To get these components, the magnitude of the vector is resolved with respect to the x-axis and the y-axis by multiplying it (the magnitude) by some trigonometric function with respect to the angle between the vector and the x or y axis.

For example, given a vector A of magnitude A which makes an angle α with the x-axis and an angle β with the y-axis, the x and y components of the vector A can be found as follows;

i. x-component is given by [tex]A_{x}[/tex]

[tex]A_{x}[/tex] = A cos α (with respect to the angle between A and the x-axis)  or

[tex]A_{x}[/tex] = A sin β (with respect to the angle between A and the y-axis)

ii. y-component is given by [tex]A_{y}[/tex]

[tex]A_{y}[/tex] = A sin α (with respect to the angle between A and the x-axis)  or

[tex]A_{y}[/tex] = A cos β (with respect to the angle between A and the y-axis)

Therefore, the y-component of a vector in a 2-dimensional Cartesian coordinate is given by the product of the magnitude of the vector and the cosine of the angle between the vector and the y-axis.

A man standing on a frictionless ice throws a 1.00kg mass at 20m/s at an angle elevation of 40.0 degrees. What was the magnitude of the mans momentum immediately after the the throl

Answers

Answer:

Explanation:

1.00kg×20m/s×cos40=15.3

Topic: Physical and Chemical Changes
Subject: Science
Grade: 5th

Question: Why am I growing?

(Please give this answer related to Physical and Chemical Changes.

Answers

Answer: Why am I growing is a chemical change.

Explanation:

Changes that can be reversed and does not affect the composition of a substance are called physical changes.

For example, change in state of a substance like ice converting into water is a physical change.

Changes that cannot be reversed and affect the chemical composition of a substance are called chemical changes.

For example, a child growing is an irreversible change and hence, it is a chemical change.

Thus, we can conclude that why am I growing is a chemical change.

A speedometer in a car gives the car’s speed at that given moment, or the?

A. General speed
B. Instantaneous speed
C. Average speed
D. Constant speed

It’s not C or D!

Answers

Answer:

a because it is at a given moment

Explanation:

did u

On Ramesh’s13th birthday, his father invited all his friends and their relatives. It was a big party with lots of food and DJs. Ramesh didn’t like the loud sound of DJs and asked his father to play it in a low volume so that their neighbours do not get much disturbed and people at the party can also enjoy the music. Ramesh’s father felt good for his wisdom and did as he said.

→Do you think when loud music is played at a party is acceptable to all the people living in, neighbourhood? Give a reason for your answer
→How can you control noise pollution at your end?

Answers

I go inside and take a nap normally that will help maybe play music

calculate the electric potential 3mm from a point charge of 16Nc​

Answers

[tex]4.8 \times 10^8[/tex] volts

Explanation:

The electric potential due to a point charge is given by

[tex]V= \dfrac{1}{4 \pi \varepsilon_{0}} \dfrac{Q}{r}[/tex]

where Q = charge = [tex]16 \times 10^{-9}[/tex] C

r = distance from a point = [tex]3 \times 10^{-3}[/tex] m

[tex]\varepsilon_{0}[/tex] = permitivity of free space

= 8.85×10^-12 C^2/N-m^2

Plugging in the numbers,

[tex]V = \dfrac{1}{4 \pi (8.85 \times 10^{-12})} \dfrac{16 \times 10{-9}}{3 \times 10^{-3}}[/tex]

[tex]= 4.8 \times 10^8[/tex] volts

A certain electric stove has a 16 Ω heating element. The current going through the element is 15 A. Calculate the voltage across the element.

Answers

The voltage across the element is = 240 V

I hope you understand....

Mark me as brainliest....

Thanks...

Two parallel circular plates with radius carrying equal-magnitude surface charge densities of are separated by a distance of How much stored energy do the plates have? A. 120 B. 360 C. 12 D. 37​

Answers

Answer:

I guess it is A. I am not sure

I’m thinking it’s a but I’m not that smart

Convert Rev/min to rad/s x 2pie/60?

Anyone knows this please?

Answers

Answer:

Thus, [tex]\frac{1 rev}{min} =\frac{2\pi}{60} rad/s[/tex]

Explanation:

The angular speed is defined as the rate of change of angular velocity.

Its SI unit is rad/s and other units are rev/min or rev/s.

[tex]\frac{1 rev}{min } = \frac{1 rev}{60 sec}\\\\1 rev = 2\pi rad\\\\So\\\\\frac{1 rev}{min} = \frac{2\pi}{60} rad/s[/tex]

A 10,000J battery is depleted in 2h. What power consumption is this? *

A) 5000W
B) 3W
C) 1.4W
D) 20000W

show your work please

Answers

Answer:

P = 1.4 W

Explanation:

Given that,

The work done or the energy of the battery, E = 10,000 J

Time, t = 2 h

We need to find the power consumption. Let it is P. Power is the rate of doing work. So,

[tex]P=\dfrac{W}{t}\\\\P=\dfrac{10,000}{2\times 3600}\\\\P=1.38\ W[/tex]

or

P = 1.4 W

So, the power of the battery is 1.4 W.

We say that evaporation is a cooling process. (a) What cools and what warms? We say that condensation is a warming process. (b) What warms and what cools?

Answers

Answer:

a liquid warms gas cools

b solid piece warms and liquid cools

A charged particle accelerates as it moves from location A to location B. If VA = 260 V and VB = 210 V, what is the sign of the charged particle? positive negative (b) A electron loses electric potential energy as it moves from point 1 to point 2. Which of the following is true regarding the electric potential at points 1 and 2?

Answers

Answer:

(a) Positive

(b) Electron gains energy as it moves from A to B.

Explanation:

VA = 260 V

VB = 210 V

An electron moves from lower to higher potential which is negatively charged and a positively charged particle moves  from higher to lower potential, so the charge particle is positive in nature.

(a) Positive

(b) No, electron gains energy as it moves from A to B.

Calculate the terminal velocity of a rain drop of radius 0.12cm​

Answers

Explanation:

Given that,

The radius of rain drop, r = 0.12 cm = 0.0012 m

The viscocity of air is, [tex]\eta=18\times 10^{-5}\ poise[/tex]

Let the viscous force is, [tex]F = 0.010173\ N[/tex]

The viscous force is given by :

[tex]F=6\pi \eta rv\\\\v=\dfrac{F}{6\pi \eta r}[/tex]

Put all the values,

[tex]v=\dfrac{0.010173}{6\pi 18\times 10^{-5}\times 0.0012 }\\\\v=2498.58\ m/s[/tex]

A homeowner has a new oil furnace which has an efficiency of 60%. For every 100 barrels of oil used to heat his house, how much (in barrels of oil) goes up the chimney as waste heat?

Answers

Answer:

below

Explanation:

If you wanted to know how much the temperature of a particular piece of material would rise when a known amount of heat was added to it, which of the following quantities would be most helpful to know?

a. coefficient of linear expansion
b. specific heat
c. initial temperature
d. thermal conductivity
e. density

Answers

Answer:

Option (b) is correct.

Explanation:

The amount of heat required to raise the temperature of substance of mass 1 kg by 1 degree C, is called specific heat of the substance.

The formula of the specific heat is

H = m c (T' - T)

where, m is the mass, c is the specific heat and T' - T is the change in temperature.

So, to know the rise in temperature, by adding the known amount of heat, the specific heat is required.

So, option (b) is correct.

12) A negatively-charged balloon touching a wooden wall
A) pulls positive charge on the wall surface toward it.
B) pushes negative charge in the wall away from it.
C) polarizes molecules in the wall.
D) all of the above.

Answers

Answer:

D) all of the above.

Explanation:

First polarises it, cahrging and discharging occurs at once.

A negatively charged balloon touching a wooden wall then from the given options option D is correct which is all of the above.

What is a charge?

Charged matter experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. Positive or negative charges can exist in an electric field (commonly carried by protons and electrons, respectively).

Contrary charges attract one another, while like charges repel one another. A neutral object is one that carries no net charge. Classical electrodynamics, the name given to an early understanding of how charged particles interact, is still accurate for issues that do not call for taking into account quantum phenomena.

In the first step it polarizes molecules in the wall, then charging and discharging in the wall will take place at once.

To get more information about Charge :

https://brainly.com/question/19886264

#SPJ2

A horizontal force is applied to a 4.0 kg box. The box starts from rest, moves a horizontal distance of 10.0 meters, and obtains a velocity of 7.0 m/s. The change in the kinetic energy is:_____.

Answers

Answer:

98 J

Explanation:

Applying,

Change in kinetic energy = Final kinetic energy- initial kinetic energy

ΔK.E = mv²/2-mu²/2..............Equation 1

Where ΔK.E = Change in kinetic energy, m = mass of the box, u = initial velocity of the box, v = final velocity of the box.

From the question,

Given: m = 4.0 kg, u = 0 m/s, v = 7 ,0 m/s

Substitute these values into equation 1

ΔK.E = (4(7²)/2)-(4(0²)/2)

ΔK.E = (2×49)-0

ΔK.E = 98 J

Hence the change in kinetic energy 98 J

A 3-kg projectile is launched at an angle of 45o above the horizontal. The projectile explodes at the peak of its flight into two pieces. A 2-kg piece falls directly down and lands exactly 50 m from the launch point. Determine the horizontal distance from the launch point where the 1-kg piece lands.

Answers

1517.4 m

Step-by-step explanation:

Since the projectile broke up at the peak of its flight, it already traveled half its initial range so we can find its initial launch velocity [tex]v_0[/tex] from the equation

[tex]\frac{1}{2}R= \dfrac{1}{2} \left(\dfrac{v_0^2}{g}\sin 2\theta_0 \right)[/tex]

where [tex]\theta_0 = 45°[/tex] and [tex]\frac{1}{2}R = 50\:\text{m}[/tex] so we will get [tex]v_0=31.3\:\text{m/s}[/tex]. Next, we can use the equation

[tex]v_y = v_0y - gt = v_0 \sin 45 - gt[/tex]

and since [tex]v_y=0[/tex] at its peak, we get t = 22.1 s. Let's set this aside for a moment and we'll use it later.

At the top of its peak, we can use the conservation law of linear momentum. Let M be the mass if of the original projectile, [tex]m_1[/tex] be the mass of the larger fragment (2 kg) and [tex]m_2[/tex] be the mass of the smaller fragment (1 kg). We can write the conservation law as

[tex]Mv_0x = m_1V_1 + m_2V_2[/tex]

where [tex]V_1\:\text{and}\:V_2[/tex] are the velocities of the fragments immediately after the break up. But we also know that [tex]V_1=0[/tex] so the velocity of [tex]m_2[/tex] can be calculated from the conservation law as

[tex]Mv_0 \cos 45° = m_2V_2[/tex]

or

[tex]V_2 = \dfrac{M}{m_2}v_0 \cos 45° = 66.4\:\text{m/s}[/tex]

Now we can calculate the horizontal distance the smaller fragment traveled after the break up. Recall that the amount of time for it to go up is also the amount of time to get down so the horizontal distance x is

[tex]x = V_2 t = (66.4\:\text{m/s})(22.1\:\text{s})= 1467.4\:\text{m}[/tex]

Therefore, the total distance traveled from the launch point is

[tex]D = 50\:\text{m} + 1467.4\:\text{m}=1517.4\:\text{m}[/tex]

The sound from a trumpet radiates uniformly in all directions in 20C air. At a distance of 5.00 m from the trumpet the sound intensity level is 52.0 dB. The frequency is 587 Hz. (a) What is the pressure amplitude at this distance

Answers

Answer:

The answer is below

Explanation:

The intensity level (B) of a sound wave is given by:

B = 10log(I/I₀);

where I₀ is the threshold intensity = 1 * 10⁻¹² W/m², I is the intensity at distance 5 m, B is the intensity level = 52 dB

Substituting gives:

[tex]52=10log(\frac{I}{10^{-12}} )\\\\log(\frac{I}{10^{-12}} )=5.2\\\\I=1.58*10^{-7}\ W/m^2[/tex]

The pressure is given by:

[tex]I=\frac{p_{max}^2}{2\rho v} \\\\\rho=air\ density=1.2\ kg/m^3,v=speed\ of\ sound\ in\ air=344\ m/s,p_{max}=pressure:\\\\p_{max}=\sqrt{2\rho vI}=\sqrt{2*1.58*10^{-7}*1.2*344} =1.14*10^{-2}Pa[/tex]

Other Questions
Why is the reaction SO2 + H2O H2SO2 not balanced? HELP!!! what is 10 * 10 * pm * 10 * pm? What is the slope of the line? 3 x + 5 y = 2 x + 3 y The dependent variable measured was the ______a. fan speedb. massc. acceleration Rita determined the experimental van 't Hoff factor, i, for KCl to be 1.9 which is less than the theoretical value of 2. Select the option that best explains the difference between the theoretical and experimental i.a) The difference is due to the ion-pairing effect which effectively reduces the number of solute particles present in the solution.b) The difference is due to the ion-pairing effect which effectively increases the number of solute particles present in the solution correct amount of KCl that will give better agreement between the experimental and theoretical results.c) Rita did not freeze the entire sample. Recall that variables represent changing values. In this unit, you will work withequations that contain two different variables. What types of situations might bemodeled with equations containing two or more variables? If the value of one variablechanges, must the value of the other variable change for the equation to remain true?How would the number of solutions for an equation with two variables differ from thenumber of solutions for an equation with only one? Explain Which gives the correct values for points A,B,C, and D? Please help me I beg youuuuuuu!!!Can you please give me an environmental risk or benefit for artificial selection? Find the equation of the line that has a slope of 7 and a y intercept of -10. Write you answer in the form of y = mx + b ANSWER FAST PLEASE Match the term to its example.1. past tense verb isn't 2. contraction believed 3. examine carefully to separate the elements almost never 4. verb phrase superlative degree 5. adverb phrase analyze 6. ZIP an acronym 7. two things compared comparative degree 8. three things compared am going Information related to Kerber Co. is presented below.1. On April 5, purchased merchandise from Wilkes Company for $23,000, terms 2/10, net/30, FOB shipping point.2. On April 6, paid freight costs of $900 on merchandise purchased from Wilkes.3. On April 7, purchased equipment on account for $26,000.4. On April 8, returned damaged merchandise to Wilkes Company and was granted a $3,000 credit for returned merchandise.5. On April 15, paid the amount due to Wilkes Company in full.Collapse question Prepare the journal entries to record these transactions on the books of Kerber Co. under a perpetual inventory system. (Credit account titles are automatically indented when amount is entered. Do not indent manually. Record journal entries in the order presented in the problem.)No. Date Account Titles and Explanation Debit Credit1. April 5April 6April 7April 8April 152. April 5April 6April 7April 8April 153. April 5April 6April 7April 8April 154. April 5April 6April 7April 8April 155. April 5April 6April 7April 8April 15 Write a paragraph comparing and contrasting the Middle Ages in Europe and in Japan? According to the Johari Window, when you're getting to know someone, you are typically expanding the size of your "hidden" pane and decreasing the size of your "unknown" pane.TrueFalse Draw an electic bettle and label 3. Look for 10 noun phrases consisting of 7 words or more Two towers A and B are 45m and 30m high. Tower A lies to the west and B to the east of a man 1.5m tall. From the mans eye level, the angle of elevation of the top of A and B are 66 and 28 respectively. Calculate correct to three signigicant fugures the distance between A and B. You are packing for a trip to another star, and on your journey you will be traveling at a speed of 0.99c. Can you sleep in a smaller cabin than usual, because you will be shorter when you lie down? Explain your answer. A dependent variable is:A. Changed to test a hypothesis.B. Measured to show the effect of a change.C. Kep the same to make an experiment a fair test.CD. Collected to draw conclusions. What is seed technology?why is still considered as one of the major subject in agriculture? Convert log_8 1=0 into an exponential equationo 1^0=8O 0^8=1o '8^0=1o '8^=8