an oil drum weights 11.8kg. when it is filled, octane it weighs 55.32kg. how many molecules of pentane c5h12 exist in this oil drum?

Answers

Answer 1

Question: an oil drum weights 11.8kg. when it is filled, pentane it weighs 55.32kg. how many molecules of pentane c5h12 exist in this oil drum?

Answer:

3.64×10²⁶ molecules

Explanation:

Applying,

n = M/M.M................... Equation 1

Where n = number of moles of pentane, M = mass of pentane, M.M = reacting mass of pentane

From the question,

Given: M = 55.32-11.8 = 43.52 kg = 43520 g

Constant: M.M of octane (C₅H₁₂) = [(12×5)+(1×12)] = 60+12 = 72 g/mol

Substitute these values into equation 1

n = 43520/72

n = 604.44 moles

Therefore,

number of molecules = n×(6.02×10²³)

number of molecules = 604.44(6.02×10²³)

number of molecules = 3.64×10²⁶ molecules


Related Questions

why do we shake syrup medicines before drinking​

Answers

Answer:

The label may instruct you to shake a liquid medicine before using so that the active ingredients are evenly distributed throughout it.

Explanation:

Answer:

maybe because if somehow the liquids get separated then shaking them up would mix them back to how they are suppose to be originally.

Explanation:

Plsss help with this ASAP TT

Answers

Answer: lithium- 3 protons, 3 electrons, 3 neutrons

Oxygen- nucleon no. 16, Atomic no. 8, 8 protons, overall charge (-2)

Sorry I don't the others. Hope this helps

Which equation describes a physical change? i. H2O(s) ⟶ H2O(l) ii. Na+(aq)+Cl−(aq) +Ag+(aq)+NO3−(aq) ⟶ AgCl(s)+Na+(aq)+NO3−(aq) iii. CH3OH(g)+O2(g) ⟶ CO2(g)+H2O(g) iv. 2H2O(l) ⟶ 2H2(g)+O2(g) v. H+(aq)+OH−(aq)⟶ H2O(l)

Answers

Answer:

The answer is "Option i"

Explanation:

In this question, only option (i) is correct, and others were wrong which can be defined as follows:

In option (ii):

[tex]Na^+\ (aq)+Cl^- \ (aq) +Ag^+ \ (aq)+NO_3^- \ (aq) \to AgCl\ (s)+Na^+ \ (aq)+NO_3^-\ (aq) \\\\[/tex]

It is the complete ionic equation.

In option (iii):

[tex]CH_3OH\ (g)+O_2\ (g) \to CO_2\ (g)+H_2O\ (g)[/tex]

It is the combustion reaction but a not balanced equation.

In option (iv):

[tex]2H_2O\ (l) \to 2H_2\ (g)+O_2\ (g)[/tex]

It is the  decomposition equation.

In option (v):

[tex]H^+\ (aq) +OH^-\ (aq)\to H_2O\ (l)[/tex]

It is the complete ionic equation.

What is known about a reaction with a positive enthalpy?

Answers

Answer:

"Endothermic reaction: In an endothermic reaction, the products are higher in energy than the reactants. Therefore, the change in enthalpy is positive, and heat is absorbed from the surroundings of the reaction."

Explanation:

When enthalpy is positive and delta H is greater than zero, this means that a system absorbed heat. This is called an endothermic reaction. When enthalpy is negative and delta H is less than zero, this means that a system released heat. This is called an exothermic reaction.

What does a high positive enthalpy mean?

The sign of q for an endothermic process is positive because the system is gaining heat. A chemical reaction or physical change is exothermic if heat is released by the system into the surroundings. Because the surroundings are gaining heat from the system, the temperature of the surroundings increases.

Learn more about the endothermic reaction here: brainly.com/question/6506846

#SPJ2

Classify the crystalline solids

full answer​

Answers

crystalline solids are the type of solid which have long term arrangement of particle

they have sharp melting and boiling point

Answer:

OMG wow thankyou so so so much for the thanks ( ◜‿◝ )♡

write an importance of endothermic reactions​

Answers

Answer:

the uses of exothermic reactions are:

1) lighting of stove

2) self heating cans

3) hand warmers

4) in some case exothermic process can be used to cook food such as rice  (by adding calcium oxide to water heat is evolved and it helps to cook food )

Explanation:

hope this helps you pls mark me as brainilst

Mercury poisoning is a debilitating disease that is often fatal. In the human body, mercury reacts with essential enzymes leading to irreversible inactivity of these enzymes. If the amount of mercury in a polluted lake is 0.4 Hg/mL, what is the total mass in kilograms of mercury in the lake

Answers

Answer:

The total mass of mercury in the lake is 631,542.7 kg

Explanation:

Question: The given dimensions of the lake as obtained from a similar question posted online are;

The surface area of the lake, A = 100 mi²

The lake's average depth, d = 20 ft.

The concentration of the mercury, C = 0.4 μg Hg/mL = 0.4 × 10⁻⁶ kg Hg/L

Therefore, we have;

The volume of water mixture in the lake, V = A × d

∴ V = 100 mi² × 20 ft. = 2,787,840,000 ft.² × 20 ft. = 55,756,800,000 ft.³

1 ft³ = 28.31685 L

∴ 55,756,800,000 ft.³ = 55,756,800,000 ft.³ × 28.31685 L/ft.³ = 1.57885675 × 10¹² L

The total mass of mercury in the lake, m = C × V

∴ m = 0.4 × 10⁻⁶ kg Hg/L × 1.57885675 × 10¹² L = 631,542.7 kg

The total mass of mercury in the lake, m = 631,542.7 kg.

05) Identify the statement that is true about atoms as they pass through the rock cycle. a. Those that were adjacent to each other remain near each other. b. They do not move through the rock cycle at the same rate. c. They move through the rock cycle in the same manner. d. They stay within the same mineral.

Answers

Answer:

b. They do not move through the rock cycle at the same rate

Explanation:

The rock cycle is the phenomenon used to describe the interrelation of the three forms in which rocks exists, and a rock is changed between forms due to the Earth's geologic process, such as erosion, weathering and plate tectonics

The rock cycle involves both chemical and physical transformation of rocks and therefore, the atoms and compounds make and cut connections, such that the rate at which each atom move through the rock cycle at different rate

[tex]v=0.164m*8.3cm*12.4cm[/tex]

Answers

Answer:

helloooo

0.164m * 100 = 16.4 cm

now multiplying all of em

v = 1,687.888

7. What measures are applicable in the context of Nepal to push energy crisis further. Describe any three points clearly.​

Answers

Answer:

which energy?........

Explanation:

..........................

........

....

pls answer this guys

love yall

Answers

Answer:

wat

Explanation:

Answer:

Basic ABCHope it helps..

distinguish between sugar and non-sugar with examples.

Answers

Answer:

Reducing sugars are sugars where the anomeric carbon has an OH group attached that can reduce other compounds. Non-reducing sugars do not have an OH group attached to the anomeric carbon so they cannot reduce other compounds. ... Maltose and lactose are reducing sugars, while sucrose is a non-reducing sugar

what is chemistry?????​

Answers

Answer:

chemistry - the science that studies the properties of substances and natural fenomens .

...........

Answer:

The Basic definition of Chemistry is:-

Chemistry is the scientific study of the properties and behavior of matter. It is the natural science that covers the elements that make up matter to the compounds that is composed of atoms, molecules and ions.

sodium chloride + water = ?
which product will it form,and in which phase is it?

Answers

Water molecules pull the sodium and chloride ions apart, breaking the ionic bond that held them together.

Must click thanks and mark brainliest

Which of the following is a common property of both strong acid and strong base?
a. They are good electrolytes
b. They are non-electrolytes
c. They are weak electrolytes
d. They are sour in test

Answers

Answer:

They are good electrolytes

Why doesn’t the KHP concentration have to be exactly 0.100M? Explain using complete sentences.

Answers

Answer:

The answer is in the explanation.

Explanation:

The KHP is an acid used as standard in titrations to find concentration of bases as NaOH.

The reaction that explain this use is:

KHP + NaOH → KNaP + H2O

where 1 mole of KHP reacts per mole of NaOH

That means, at equivalence point of a titration in which titrant is NaOH, the moles of KHP = Moles of NaOH added

With the moles of KHP = Moles of NaOH and the volume used by titrant we can find the molar concentration of NaOH.

The moles of KHP are obtained from the volume and the concentration as follows:

Volume(L)*Concentration (Molarity,M) = moles of KHP

If the concentration is more or less than 0.100M, the moles will be higher or lower. For that reason, we need to know the concentration of KHP but is not necessary to be 0.100M.

Can someone plz help me :<

Answers

Answer: cats r alliens because they r kind of like ufos they would usually wonder around rather u know it or not when they spy on us it could b with us sleep cooking anything so they r like aliens

Explanation:

At what approximate temperature and pressure can all three phases of water exist simultaneously?

0°C, 760 mmHg
0°C, 5 mmHg
80°C, 380 mmHg
100°C, 760 mmHg

Answers

Answer:

0⁰c , 5 mmHg

Explanation:

Because at this temperature we all know water can be in state of both solid and liquid and when pressure is decreased it can be in form of gas too

Tenemos una disolución de HNO3 cuya pureza es del 65% y tiene una densidad de 1.32 g/mL. ¿Cuál es la molaridad de la disolución? PM HNO3 = 63.0 g/mol.

Answers

Teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, la molaridad de la disolución de HNO₃ es 14.67 [tex]\frac{mol}{L}[/tex].

El porcentaje en masa o en peso de una disolución es el número de gramos de soluto que hay por cada 100 gramos de disolución.

Entonces una pureza de 65% indica que hay 70 g de HNO₃ puro por cada 100 g de HNO₃ impuro.

Por otro lado, la densidad es la relación entre el peso o masa de una sustancia y el volumen que ocupa esa misma sustancia.

Entonces, si la disolución de HNO₃ tiene una densidad de 1.32 g/mL (equivalente a 1320 g/L), donde la cantidad de masa es impura, se puede obtener la cantidad de masa de HNO₃ presente 1 L de la solución mediante el siguiente cálculo:

[tex]\frac{1320 g HNO_{3} impuro}{1 L}x \frac{70 g HNO_{3}puro}{100 g HNO_{3}impuro}= 924 \frac{g HNO_{3}puro}{L}[/tex]

Finalmente, la masa molar de HNO₃, es decir la masa presente en un mol de la sustancia, es 63 [tex]\frac{g}{mol}[/tex].

Entonces, teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, es posible determinar la molaridad como:

[tex]\frac{924 g HNO_{3}puro}{L}* \frac{1 mol}{63 g}= 14.67 \frac{mol}{L}[/tex]

En resumen, la molaridad de la disolución es 14.67 [tex]\frac{mol}{L}[/tex]

Aprende más sobre la molaridad:

https://brainly.com/question/17647411?referrer=searchResultshttps://brainly.com/question/21276846?referrer=searchResults

Formal charge is calculated by assigning each atom _____ the bonding electrons that it shares. Oxidation number is determined by assigning all the shared electrons of a particular bond to the atom with the _____ electronegativity. Multiple choice question. half; higher half; lower all; lower all; higher

Answers

Answer:

A). half, higher

Explanation:

The Formal charge is elaborated as the 'allocated charge to a molecules' atom' on the basis of the assumption that the electrons present in the chemical bond are equally split among the atoms. It is estimated by 'halving the no. of bonding electrons that encircle the atom.

While Oxidation number is characterized as the 'hypothetical charge of an atom that is present within a molecule.' It is also defined as 'the actual number of lost or gained electrons or the rate at which the electrons are gained or lost by an atom to develop a chemical bond along with the other atom.' It is calculated by allocating or sharing the electrons having the higher electronegativity belonging to a specific bond with the other. Thus, option A is the correct answer.

50. Carbon mono-oxide can be prepared by heating following substance with Conc. H2SO4. a. Oxalic acid b. Acetic acid c. Ethanoic acid d. All ic 252​

Answers

A

Carbon monoxide gas can be prepared in lab by heating formic acid or oxalic acid with conc. H2SO4.

Procedure: Small amount of oxalic acid crystal is taken in a round- bottomed flask and all the apparatus are fitted as shown in figure. When conc. H2SO4 is poured in the flask through thistle funnel and heated then a mixture of CO and CO2 gas is formed. The mixture of gas is passed through a bottle containing NaOH solution where the CO2 gas is absorbed by NaOH.

2NaOH + CO2 → Na2CO3 + H2O

The pure CO gas is then collected in a gas jar by downward displacement of water.

Is water the only liquid? If not, name 5 more

Answers

Answer:

Is water the only liquid? If not, name 5 more

Water, ethanol, household bleach, blood, paint, milk, gasoline, mineral oil, acetone and butyl alcohol are examples of liquids. Liquids' properties allow them to flow or be poured easily into containers, lava

water is not the only liquid.

Answer:

apple juice, milk, smoothie, blood, urine

I need help with b) c) and what is the electronic configuration of atom E

Answers

Answer:

(b) A and C belongs to same group.

(c) D is a non metal.

Explanation:

The Electronic Configuration of E is

[tex]1s {}^{2} 2s {}^{2}2p {}^{6} 3s {}^{2} 3p {}^{6} 4s {}^{2} [/tex]

True or false, The four units that must always be used when using the ideal gas are 44.0 liters

Answers

Answer:

for volume only liters can be used

Explanation:

tính chất hoá học của Cu

Answers

Answer:

các oxit đồng khi nó tiếp xúc với không khí. nó phản ứng đặc biệt với oxy trong không khí (không phải hơi ẩm), và tạo ra nấm mốc

Temperature (°C) 5
Heating Curve for Water
160
140
2 120
100
80
60
40
20
0
-20
1 2 3 4 5 6 7
Time (min)
8
9
10
At what temperature does the solid start melting?
0 -20°C
0°C
20°C
80°C

Answers

Answer:

Showing results for Temperature (°C) 5 Heating Curve for Water 160 140 2 120 100 80 60 40 20 0 "-20" 1 2 3 4 5 6 7 Time (min) 8 9 10 At what temperature does the solid start melting?

Describe the principle and process for the manufractured of sulphuric acid witha a well labeled diagram by contact process.

Answers

The steps involved in the manufacture of sulphuric acid by contact process:

(1) Sulphur (or iron pyrites) are burnt in air to form sulphur dioxide.

  S+O2→SO24FeS2+11O2→2Fe2O3+8SO2

(2) Catalytic oxidation of sulphur dioxide to sulphur trioxide.

  2SO2+O2V2O52SO3ΔrHo=−196.6kJ

The reaction is reversible and exothermic.

(3) Sulphur trioxide is dissolved in 98% sulphuric acid to form oleum (fuming sulphuric acid). 

  SO3+H2SO4→H2S2O7

(4) Oleum is diluted with water to form sulphuric acid of desired concentration.

    H2S2O7+H2O→2H2SO4

            and

Manufacture of H2SO4 by contact process involves three steps:

1. Burning of sulphur in air to generate SO2.

2. Conversion of SO2 to SO3 by oxidation with air in the presence of 

Question 2 Multiple Choice Worth 2 points)
(01.01 LC)
Which of the following is a characteristic of science?
O Reproducible by other scientists
The personal opinion of the scientist
Using vanable conditions for each test
O Including only the data that supports a hypothesis
Question 3 Multiple Choice Worth 2 points)

Answers

Answer:

Reproducible by other scientists

The personal opinion of the scientist

Using vanable conditions for each test

Explanation:

Convert 48,987 minutes to years
using the method of dimensional analysis

Answers

Answer:

Explanation:

48000 minutes [ 1 hour  / 60 min ] 1 day / 24 hours ] [365 days / year]

48000 * [ 1/(60 * 24 * 365)]

48000 * [1 / 525600]

There are 0.0930954years in 48000 minutes

Question 10 of 10 A certain seed is surrounded by a sticky coating. It is fairly dense and does not float in water. How is this seed most likely spread?
A. It is dispersed by the wind, and it sprouts after it falls to the ground
B. It drops to the bottom of a body of water, where it sprouts.
C. It attaches to the fur of an animal, and it sprouts after it falls from the animal's fur.
D. Animals eat it, and it is deposited in their waste. ​

Answers

The answer is C

It attaches to the fur of an animal, and it sprouts after it falls from the animal’s fur.
Other Questions
XYZ Corporation manufactures two models of office chairs, a standard and a deluxe model. The overhead costs for setups and components pools are $60,000 and $58,900, respectively. The following activity has been compiled: Number of Number of Number of Setups Components Direct Labor Hours Standard 11 6 295 Deluxe 29 13 205Overhead costs $63,600 $102.600 Number of setups and number of components are identified as activity-cost drivers for overhead. Assuming an activity based costing system is used, what is the total amount of overhead costs assigned to the standard model? A. $109,200 B. $57,000 C. $83,000 D. $83,100 In the first quatrain the speaker is comparing Help please ty !!!!!!:) 5. Which of the following Is an example of Mussolini's nationalist rhetoric? A civil servant had a salary of Rs 9600. Tax up to Rs 85000 per year would be exempted. If he paid Rs 4530 as a tax, how much percent of tax was imposed? Burt is strategizing and planning an IMC marketing campaign for the company where he is employed as marketing specialist. If he is to execute an effective IMC campaign, which aspects should he consider Which phrases expresses how the word concession is used in this passage from the story "Steeled"?As I got older, though, I was allowed to sit with my father and watch him eat the car. I knew this concession had not come easily and that it was always under debate; often at night I could hear them arguing about it in their room with the door shut, and though I couldn't often make out the words, I knew from the pitch of their voices that it was the car they were talking about, the car, and my father, and me.strong resistanceburning desirereluctant compromiseheated argument Can someone help me on this Please It's currently 1:00 in the afternoon. You want to schedule the myapp program to run automatically tomorrow at noon (12:00). What two at commands could you use A cube, whose edges are aligned with the , and axes, has a side length . The field is immersed in an electric field aligned with the axis. On the left and right faces, the field has a strength and , respectively. The field along the front and back faces has strengths and . The field at the bottom and top faces has strengths and , respectively. What is the total charge enclosed by the cube Which angles are supplementary to each other? Angle 7 and Angle 3 Angle 9 and Angle 12 Angle 6 and Angle 12 Angle 12 and Angle 10 Power selection feature for resistors to become water modules 10 liters of water at 25C to n95oC for 20 minutes. Which of the following statements is false? the -OH group cannot exhibit inductive effect? true/false, and reason for ur choice notice You are Andy /Anna , student of DAV Public school ,Busan . Being the student Editor of your school magazine Horizons, write a notice for the school notice board, inviting short stories, articles, poems etc. from students of all classes for the school magazine. Give all the necessary details.please help Should commercial airlines continue to receive government sourced financial support? HERES TWO, IF YOU GET THEM BOTH RIGHT, I'LL GIVE YOU BRAINLEST!!Transformation of Energy Video1. Explain an example of how energy is transferred from one form to another in the video.2. Draw an energy flow diagram showing the energy transformation from one form to another. power point is hardware or software [tex] {ap}^{5} ( {a}^{2} + ap) - 12 {a}^{2} {p}^{6} [/tex]Remove brackets and simplify Annie bought a 2 3/4 pound roast for the family dinner. A total of 9 people will be at dinner. How many pound of roast will each person get if the roast is divided up equally?