answer pls A set of data with a correlation coefficient of -0.855 has a a.moderate negative linear correlation b. strong negative linear correlation c.weak negative linear correlation dlittle or no linear correlation

Given that f(x) = x² - 2x + 5. We need to find the absolute maximum and minimum of the function.Let us differentiate the function to find critical points, that is, f '(x) = 2x - 2.We know that f(x) is maximum or minimum at critical points. So, f '(x) = 0 or f '(x) does not exist.

Let's solve for x.2x - 2 = 0⇒ 2x = 2⇒ x = 1Therefore, f '(1) = 2(1) - 2 = 0The critical point is x = 1.Now, we need to test if this critical point gives an absolute maximum or minimum.To do this, we can check the value of f(x) at this point as well as the values of f(x) at the endpoints of the domain of x. Here, the domain is -∞ < x < ∞.Let's begin by calculating f(x) at the critical point.x = 1⇒ f(1) = (1)² - 2(1) + 5= 4Therefore, the function has a maximum at x = 1.

Now, let's check the values of f(x) at the endpoints of the domain.x → -∞⇒ f(x) → ∞x → ∞⇒ f(x) → ∞Therefore, there are no minimum values of the function.To summarize, the absolute maximum of the function f(x) = x² - 2x + 5 is 4 and there is no absolute minimum value of the function as f(x) approaches infinity for both positive and negative values of x.

To know more about domain visit :

brainly.com/question/30133157

#SPJ11

The assumption that is NOT underlying independent samples t-tests is: c. Normality of the independent lines  variable.

An independent samples t-test is a hypothesis test that compares the means of two unrelated groups to see if there is a significant difference between them. This test is used when we have two separate groups of individuals or objects, and we want to compare their means on a continuous variable. It is also referred to as a two-sample t-test.The underlying assumptions of independent samples t-tests are as follows:1. Independence of observations: The observations in each group must be independent of each other. This means that the scores of one group should not influence the scores of the other group.2.

Homogeneity of the population variance: The variance of scores in each group should be equal. This means that the spread of scores in one group should be the same as the spread of scores in the other group.3. Normality of the dependent variable: The distribution of scores in each group should be normal. This means that the scores in each group should be distributed symmetrically around the mean, with most of the scores falling close to the mean value. The assumption that is NOT underlying independent samples t-tests is normality of the independent variable.

To know more about parallel lines visit:

https://brainly.com/question/16701300

#SPJ11

The function can be graphed by first identifying the midline, which is the vertical shift of 4 units up from the x-axis, and then plotting points based on the amplitude and period of the function.

The amplitude of the function f(x) = 5 sin[2 (x - 1)] + 4 is 5.

This is because the amplitude of a function is the absolute value of the coefficient of the trigonometric function.

Here, the coefficient of the sine function is 5, and the absolute value of 5 is 5.

The transformation that is taking place in this function is a vertical shift up of 4 units.

Therefore, the appropriate statement regarding the graph of the function is that it has an amplitude of 5 and a vertical shift up of 4 units.

The function can be graphed by first identifying the midline, which is the vertical shift of 4 units up from the x-axis, and then plotting points based on the amplitude and period of the function.

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

The maximal margin of error associated with a 90% confidence interval for the true population mean turtle weight is 1.0091 ounces.

Given that: Mean weight of 49 turtles = 68 ounces, Population standard deviation = 4.3 ounces, Confidence level = 90% Formula to calculate the maximal margin of error is:

Maximal margin of error = z * (σ/√n), where z is the z-score of the confidence level σ is the population standard deviation and n is the sample size. Here, the z-score corresponding to the 90% confidence level is 1.645. Using the formula mentioned above, we can find the maximal margin of error. Substituting the given values, we get:

Maximal margin of error = 1.645 * (4.3/√49)

Maximal margin of error = 1.645 * (4.3/7)

Maximal margin of error = 1.645 * 0.61429

Maximal margin of error = 1.0091

Thus, the maximal margin of error associated with a 90% confidence interval for the true population mean turtle weight is 1.0091 ounces.

Learn more about margin of error visit:

brainly.com/question/29100795

#SPJ11

The maximal margin of error associated with a 90% confidence interval for the true population mean turtle weight is 0.1346.

The formula for the maximal margin of error associated with a 90% confidence interval for the true population mean turtle weight is shown below:

Maximum margin of error = (z-score) * (standard deviation / square root of sample size)

whereas for the 90% confidence level, the z-score is 1.645, given that 0.05 is divided into two tails. We must first convert ounces to decimal form, so 4.3 ounces will become 0.2709 after being converted to a decimal standard deviation. In addition, since there are 49 turtle weights in the sample, the sample size (n) is equal to 49. By plugging these values into the above formula, we can find the maximal margin of error as follows:

Maximal margin of error = 1.645 * (0.2709 / √49) = 0.1346.

Therefore, the maximal margin of error associated with a 90% confidence interval for the true population mean turtle weight is 0.1346.

Learn more about margin of error visit:

brainly.com/question/29100795

#SPJ11

Let the first die be represented by a random hypotheses X and the second die by Y. The value of the random variable Z represents the coin flip. Let us first find the sample space of the Experimen.

t:Sample space =

{ (1,1,H), (1,2,H), (1,3,H), (1,4,H), (1,5,H), (1,6,H), (2,1,H), (2,2,H), (2,3,H), (2,4,H), (2,5,H), (2,6,H), (3,1,H), (3,2,H), (3,3,H), (3,4,H), (3,5,H), (3,6,H), (4,1,H), (4,2,H), (4,3,H), (4,4,H), (4,5,H), (4,6,H), (5,1,H), (5,2,H), (5,3,H), (5,4,H), (5,5,H), (5,6,H), (6,1,H), (6,2,H), (6,3,H), (6,4,H), (6,5,H), (6,6,H) }

Let us find the events that satisfy the condition "If the sum of the dice is less than 6 and the coin is H".

Event A = { (1,1,H), (1,2,H), (1,3,H), (1,4,H), (2,1,H), (2,2,H), (2,3,H), (3,1,H) }There are 8 elements in Event A. Let us find the events that satisfy the condition "If the sum of the dice is less than 6 and the coin is H, I will tell you". There are four possible outcomes of the coin flip, namely H, T, HH, and TT. Let us find the events that correspond to each outcome. Outcome H Event B = { (1,1,H), (1,2,H), (1,3,H), (1,4,H) }There are 4 elements in Event B.

TO know more  about hypotheses visit:

https://brainly.com/question/28331914

#SPJ11

The equation for the asymptote of the graphed function is x = 7

The asymptote is a endlessly tendency to a given value. A vertical one is a tendency to infinity.

Here we can see that there is a vertical asymoptote, notice that in one end the function tends to positive infinity and in the other it tends to negative infinity.

The equation of the line where the asymptote is, is:

x = 7

So that is the answer.

Learn more about asymptotes at:

https://brainly.com/question/1851758

#SPJ1

The y-intercept of [tex]\((g/f)(x)\)[/tex]is (c) -3/2.

To find the y-intercept of ((g/f)(x)), we first need to determine the expression for this quotient function.

Given the functions [tex]\(f(x) = x^2 - 6x + 8\)[/tex] and [tex]\(g(x) = x^2 - x - 12\)[/tex] , the quotient function [tex]\((g/f)(x)\)[/tex]can be written as [tex]\(\frac{g(x)}{f(x)}\).[/tex]

To find the y-intercept of ((g/f)(x)), we need to evaluate the function at (x = 0) and determine the corresponding y-value.

First, let's find the expression for ((g/f)(x)):

[tex]\((g/f)(x) = \frac{g(x)}{f(x)}\)[/tex]

[tex]\(f(x) = x^2 - 6x + 8\) and \(g(x) = x^2 - x - 12\)[/tex]

Now, let's substitute (x = 0) into (g(x)) and (f(x)) to find the y-intercept.

For [tex]\(g(x)\):[/tex]

[tex]\(g(0) = (0)^2 - (0) - 12 = -12\)[/tex]

For (f(x)):

[tex]\(f(0) = (0)^2 - 6(0) + 8 = 8\)[/tex]

Finally, we can find the y-intercept of ((g/f)(x)) by dividing the y-intercept of (g(x)) by the y-intercept of (f(x)):

[tex]\((g/f)(0) = \frac{g(0)}{f(0)} = \frac{-12}{8} = -\frac{3}{2}\)[/tex]

Therefore, the y-intercept of [tex]\((g/f)(x)\)[/tex] is [tex]\(-\frac{3}{2}\)[/tex], which corresponds to option (c).

Learn more about y-intercept of quotient function

brainly.com/question/30973944

#SPJ11

The measure of angle θ is 90° and 450° (in degrees) or π/2 and 5π/2 (in radians).

Given that (cos θ - 1) (sin θ + 1) = 0 and 0 ≤ θ ≤ 2π, we need to find the measure of angle θ. We can solve it as follows:

Step 1: Multiplying the terms(cos θ - 1) (sin θ + 1)

= 0cos θ sin θ - cos θ + sin θ - 1

= 0cos θ sin θ - cos θ + sin θ

= 1cos θ(sin θ - 1) + 1(sin θ - 1)

= 0(cos θ + 1)(sin θ - 1) = 0

Step 2: So, we have either (cos θ + 1)

= 0 or (sin θ - 1)

= 0cos θ

= -1 or

sin θ = 1

The values of cosine can only be between -1 and 1. Therefore, no value of θ exists for cos θ = -1.So, sin θ = 1 gives us θ = π/2 or 90°.However, we have 0 ≤ θ ≤ 2π, which means the solution is not complete yet.

To find all the possible values of θ, we need to check for all the angles between 0 and 2π, which have the same sin value as 1.θ = π/2 (90°) and θ = 5π/2 (450°) satisfies the equation.

Therefore, the measure of angle θ is 90° and 450° (in degrees) or π/2 and 5π/2 (in radians).

To know more about radians visit

https://brainly.com/question/31064944

#SPJ11

The given series is as follows:[infinity] (−1)n 7nn n! n = 1We need to determine if the series is convergent or divergent by using the Alternating Series Test. The Alternating Series Test states that if the terms of a series alternate in sign and are decreasing in absolute value, then the series is convergent.

The sum of the series is the limit of the sequence formed by the partial sums.The given series is alternating since the sign of the terms changes in each step. So, we can apply the alternating series test.Now, let’s calculate the absolute value of the series:[infinity] |(−1)n 7nn n!| n = 1Since the terms of the given series are always positive, we don’t need to worry about the absolute values. Thus, we can apply the alternating series test.

To know more about convergent visit :-

https://brainly.com/question/29258536

#SPJ11

The work done in stretching the spring from 16 cm to 18 cm is 0.10 J.

Calculation of spring constant The given spring has a natural length of 16 cm. When it is stretched to 20 cm, a force of 21 N is required. We know that the spring constant is given by the force required to stretch a spring per unit of extension. It can be calculated as follows; k = F / x where k is the spring constant F is the force required to stretch the spring x is the extension produced by the force Substituting the given values in the above formula, we get; k = 21 N / (20 cm - 16 cm) = 5 N/cm = 500 N/m Therefore, the exact value of the spring constant is 500 N/m.(b) Calculation of work done in stretching the spring from 16 cm to 18 cm The work done in stretching a spring from x1 to x2 is given by the area under the force-extension graph from x1 to x2.

The force-extension graph for a spring is a straight line passing through the origin with a slope equal to the spring constant. As we know that W = 1/2kx²The extension produced in stretching the spring from 16 cm to 18 cm is:x2 - x1 = 18 cm - 16 cm = 2 cm The work done in stretching the spring from 16 cm to 18 cm is given by:W = (1/2)k(x2² - x1²) = (1/2)(500 N/m)(0.02 m)² = 0.10 J.

To know more about spring visit:-

https://brainly.com/question/29975736

#SPJ11

Therefore, the values of x for which function f(x) = 7 are x = 24 and x = -16.

To find the values of x for which f(x) is equal to 7, we can set up the equation:

0.5|x – 4| – 3 = 7

First, let's isolate the absolute value term by adding 3 to both sides:

0.5|x – 4| = 10

Next, we can remove the coefficient of 0.5 by multiplying both sides by 2:

|x – 4| = 20

Now, we can split the equation into two cases, one for when the expression inside the absolute value is positive and one for when it is negative.

Case 1: (x - 4) > 0:

In this case, the absolute value expression becomes:

x - 4 = 20

Solving for x:

x = 20 + 4

x = 24

Case 2: (x - 4) < 0:

In this case, the absolute value expression becomes:

-(x - 4) = 20

Expanding the negative sign:

-x + 4 = 20

Solving for x:

-x = 20 - 4

-x = 16

Multiplying both sides by -1 to isolate x:

x = -16

To know more about function,

https://brainly.com/question/20871976

#SPJ11

a. The probability that an advertising firm chosen at random has under probability  $1 million in income after taxes is 0.52.

Number of advertising firms having income less than $1 million = 128Number of firms = 244Formula used:P(A) = (Number of favourable outcomes)/(Total number of outcomes)The total number of advertising firms = 244P(A) = Number of firms having income less than $1 million/Total number of firms=128/244=0.52b-1. The probability that an advertising firm chosen at random has either an income between $1 million and $20 million, or an Income of $20 million or more is 0.48. (Round your answer to 2 decimal places.)Explanation:Given information:Number of advertising firms having income between $1 million and $20 million = 62Number of advertising firms having income of $20 million or more = 54Total number of advertising firms = 244Formula used:

P(A or B) = P(A) + P(B) - P(A and B)Probability of advertising firms having income between $1 million and $20 million:P(A) = 62/244Probability of advertising firms having income of $20 million or more:P(B) = 54/244Probability of advertising firms having income between $1 million and $20 million and an income of $20 million or more:P(A and B) = 0Using the formula:P(A or B) = P(A) + P(B) - P(A and B)P(A or B) = 62/244 + 54/244 - 0=116/244=0.48Therefore, the probability that an advertising firm chosen at random has either an income between $1 million and $20 million, or an Income of $20 million or more is 0.48.b-2. Rule of addition was applied.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ11

The given problem requires us to find h′(0) for the function h(x) = g(x)f(x), where f and g are functions such that f(0) = 2, g(0) = 5, f′(0) = 9, and g′(0) = −8.In order to find h′(0), we can use the product rule of differentiation.

The product rule states that the derivative of the product of two functions is the first function times the derivative of the second function plus the second function times the derivative of the first function.In other words, if we have h(x) = f(x)g(x), thenh′(x) = f(x)g′(x) + f′(x)g(x).Applying this rule to our problem, we geth′(x) = f(x)g′(x) + f′(x)g(x)h′(0) = f(0)g′(0) + f′(0)g(0)h′(0) = 2(-8) + 9(5)h′(0) = -16 + 45h′(0) = 29Therefore, h′(0) = 29.

To know more about functions visit :-

https://brainly.com/question/31062578

#SPJ11

Answer:

To prove the inequality P(X ≥ a) ≤ E[X] / a for a > 0, where X is a non-negative random variable, we can use Markov's inequality.

Markov's inequality states that for any non-negative random variable Y and any constant c > 0, we have P(Y ≥ c) ≤ E[Y] / c.

Let's apply Markov's inequality to the random variable X - a, where a > 0:

P(X - a ≥ 0) ≤ E[X - a] / 0

Simplifying the expression:

P(X ≥ a) ≤ E[X - a] / a

Since X is a non-negative random variable, E[X - a] = E[X] - a (the expectation of a constant is equal to the constant itself).

Substituting this into the inequality:

P(X ≥ a) ≤ (E[X] - a) / a

Rearranging the terms:

P(X ≥ a) ≤ E[X] / a - 1

Adding 1 to both sides of the inequality:

P(X ≥ a) + 1 ≤ E[X] / a

Since the probability cannot exceed 1:

P(X ≥ a) ≤ E[X] / a

Therefore, we have proved that P(X ≥ a) ≤ E[X] / a for a > 0, based on Markov's inequality.

To find the probability that exactly 10 members are absent at a given meeting, we can use the binomial probability formula. In this case, we have a fixed number of trials (the number of team members, which is 75) and a fixed probability of success (the absentee rate, which is 12%).

The binomial probability formula is given by:

[tex]\[ P(X = k) = \binom{n}{k} \cdot p^k \cdot (1-p)^{n-k} \][/tex]

where:

- [tex]\( P(X = k) \)[/tex] is the probability of exactly k successes

- [tex]\( n \)[/tex] is the number of trials

- [tex]\( k \)[/tex] is the number of successes

- [tex]\( p \)[/tex] is the probability of success

In this case, [tex]\( n = 75 \), \( k = 10 \), and \( p = 0.12 \).[/tex]

Using the formula, we can calculate the probability:

[tex]\[ P(X = 10) = \binom{75}{10} \cdot 0.12^{10} \cdot (1-0.12)^{75-10} \][/tex]

The binomial coefficient [tex]\( \binom{75}{10} \)[/tex] can be calculated as:

[tex]\[ \binom{75}{10} = \frac{75!}{10! \cdot (75-10)!} \][/tex]

Calculating these values may require a calculator or software with factorial and combination functions.

After substituting the values and evaluating the expression, you will find the probability that exactly 10 members are absent at a given meeting.

To know more about probability visit-

brainly.com/question/31198163

#SPJ11

Variable Manufacturing Overhead Efficiency can be calculated by comparing the standard cost of actual production at the standard number of hours required to produce the actual output, which is multiplied by the standard variable overhead rate per hour, with the actual variable overhead cost incurred in producing the actual output.

Variance is calculated by comparing the standard cost of actual production at the standard number of hours required to produce the actual output, which is multiplied by the standard variable overhead rate per hour, with the actual variable overhead cost incurred in producing the actual output.

The following formula can be used to calculate the Variable Manufacturing Overhead Efficiency Variance:

Variable Manufacturing Overhead Efficiency

Variance = (Standard Hours for Actual Output x Standard Variable Overhead Rate) - Actual Variable Overhead Cost

Where,

Standard Hours for Actual Output = Standard time required to produce the actual output at the standard variable overhead rate per hour

Standard Variable Overhead Rate = Budgeted Variable Manufacturing Overhead / Budgeted Hours

Actual Variable Overhead Cost = Actual Hours x Actual Variable Overhead Rate

The above formula can also be represented as follows:

Variable Manufacturing Overhead Efficiency Variance = (Standard Hours for Actual Output - Actual Hours) x Standard Variable Overhead Rate

Therefore, the Variable Manufacturing Overhead Efficiency Variance can be calculated by comparing the standard cost of actual production at the standard number of hours required to produce the actual output, which is multiplied by the standard variable overhead rate per hour, with the actual variable overhead cost incurred in producing the actual output. It is an essential tool that helps companies measure their actual productivity versus the estimated productivity.

To know more about standard variable visit:

https://brainly.com/question/30693267

#SPJ11

Approximately 95% of the values in a normal distribution with a mean of 4 and a standard deviation of 2 fall between X ≈ 0.08 and X ≈ 7.92.

Let's follow the instructions step by step:

1. Draw the normal curve:

                            _

                           /   \

                          /     \

2. Insert the mean and standard deviation:

  Mean (µ) = 4

Standard Deviation (σ) = -2 (assuming you meant 2 instead of "a -2")

                    _

                   /   \

                  /  4  \

3. Label the area of 95% under the curve:

                     _

                   /   \

                  /  4  \

                 _________________

                |                 |

                |                 |

                |                 |

                |                 |

                |                 |

                |                 |

                |                 |

                |_________________|

4. Use Z to solve the unknown X values (lower X and Upper X):

We need to find the Z-scores that correspond to the cumulative probability of 0.025 on each tail of the distribution. This is because 95% of the values fall within the central region, leaving 2.5% in each tail.

Using a standard normal distribution table or calculator, we can find that the Z-score corresponding to a cumulative probability of 0.025 is approximately -1.96.

To find the X values, we can use the formula:

X = µ + Z * σ

Lower X value:

X = 4 + (-1.96) * 2

X = 4 - 3.92

X ≈ 0.08

Upper X value:

X = 4 + 1.96 * 2

X = 4 + 3.92

X ≈ 7.92

Therefore, between X ≈ 0.08 and X ≈ 7.92, approximately 95% of the values will fall within this range in a normal distribution with a mean of 4 and a standard deviation of 2.

To know more about the Z-scores refer here :

https://brainly.com/question/30557336#

#SPJ11

Complete question :

Given a normal distribution with µ =4 and a -2, what is the probability that Question: Between what two X values (symmetrically distributed around the mean) are 95 % of the values? Instructions Please don't simply state the results. 1. Draw the normal curve 2. Insert the mean and standard deviation 3. Label the area of 95% under the curve 4. Use Z to solve the unknown X values (lower X and Upper X)

The obtained values are where (f – g)(x) is above the x-axis, i.e., (f – g)(x) is positive.The interval where this occurs is (–2, [infinity]). The correct option is (–2, [infinity]).

Given the linear functions f (x) and g(x) in the tables, the solution to the expression (f – g)(x) is positive where x is in the interval (–2, [infinity]).

The table has the following values:

x -8 -5 -2 1 4

f(x) -4 -6 -8 -10 -12

g(x) -14 -11 -8 -5 -2

To find (f – g)(x), we have to subtract each element of g(x) from its corresponding element in f(x) and substitute the values of x.

Therefore, we have:(f – g)(x) = f(x) - g(x)

Now, we can complete the table for (f – g)(x):

x -8 -5 -2 1 4

f(x) -4 -6 -8 -10 -12

g(x) -14 -11 -8 -5 -2

(f – g)(x) 10 5 0 -5 -10

To find where (f – g)(x) is positive, we only need to look at the values of x such that (f – g)(x) > 0.

These values are where (f – g)(x) is above the x-axis, i.e., (f – g)(x) is positive.

The interval where this occurs is (–2, [infinity]).

Therefore, the correct option is (–2, [infinity]).

Know more about the linear functions

https://brainly.com/question/2248255

#SPJ11

a. The density function for a uniformly distributed random variable can be represented by a rectangular shape, where the height of the rectangle represents the probability density within a given interval. Since the minimum and maximum values are 20 and 60, respectively, the width of the rectangle will be 60 - 20 = 40.

The density function for this uniformly distributed random variable can be represented as follows:

```

  |       _______

  |      |       |

  |      |       |

  |      |       |

  |      |       |

  |______|_______|

   20    60

```

The height of the rectangle is determined by the requirement that the total area under the density function must be equal to 1. Since the width is 40, the height is 1/40 = 0.025.

b. To determine P(35 < X < 45), we need to calculate the area under the density function between 35 and 45. Since the density function is a rectangle, the probability density within this interval is constant.

The width of the interval is 45 - 35 = 10, and the height of the rectangle is 0.025. Therefore, the area under the density function within this interval can be calculated as:

P(35 < X < 45) = width * height = 10 * 0.025 = 0.25

So, P(35 < X < 45) is equal to 0.25.

c. If you want to draw the density function including P(35 < X < 45), you can extend the rectangle representing the density function to cover the entire interval from 20 to 60. The height of the rectangle remains the same at 0.025, and the width becomes 60 - 20 = 40.

The updated density function with P(35 < X < 45) included would look as follows:

```

  |       ___________

  |      |           |

  |      |           |

  |      |           |

  |      |           |

  |______|___________|

   20    35    45    60

```

In this representation, the area of the rectangle between 35 and 45 would correspond to the probability P(35 < X < 45), which we calculated to be 0.25.

To know more about probability visit-

brainly.com/question/31950528

#SPJ11

The statement give '' If you are testing hypotheses and you find p-value which gives you an acceptance of the alternative hypotheses for a 1% significance level, then all other things being the same you would also get an acceptance of the alternative hypothesis for a 5% significance level '' is False.

The significance level, also known as the alpha level, is the threshold at which we reject the null hypothesis. A lower significance level indicates a stricter criteria for rejecting the null hypothesis.

If we find a p-value that leads to accepting the alternative hypothesis at a 1% significance level, it does not necessarily mean that we will also accept the alternative hypothesis at a 5% significance level.

If the p-value is below the 1% significance level, it means that the observed data is very unlikely to have occurred by chance under the null hypothesis. However, this does not automatically imply that it will also be unlikely under the 5% significance level.

Accepting the alternative hypothesis at a 1% significance level does not guarantee acceptance at a 5% significance level. The decision to accept or reject the alternative hypothesis depends on the specific p-value and the chosen significance level.

To know more about p-value, refer here :

https://brainly.com/question/30078820#

#SPJ11

The value of x in quadrilateral cdef inscribed in circle is (b) 44.

To find the value of x, we can use the property that opposite angles in an inscribed quadrilateral are supplementary (their measures add up to 180°).

Given that quadrilateral CDEF is inscribed in circle A, we have:

m∠CFE + m∠CDE = 180°

Substituting the given angle measures:

(2x + 6)° + (2x - 2)° = 180°

Combining like terms:

4x + 4 = 180

Subtracting 4 from both sides:

4x = 176

Dividing both sides by 4:

x = 44

Therefore, the value of x is 44.

The correct answer is:

b. 44

Learn more about inscribed quadrilaterals

brainly.com/question/28262325

#SPJ11

The sample consists of 9 exam scores: 42, 40, 38, 26, 42, 46, 42, 50, and 44. The mean when adding or subtracting a constant A professor gives a statistics exam is √44.1115 ≈ 6.6419

To calculate the sample size, n, and t, we need to follow the steps below:

Find the sum of the scores:

42 + 40 + 38 + 26 + 42 + 46 + 42 + 50 + 44 = 370

Calculate the sample size, n, which is the number of scores in the sample:

n = 9

Calculate the mean, μ, by dividing the sum of the scores by the sample size:

μ = 370 / 9 = 41.11 (rounded to two decimal places)

Calculate the deviations of each score from the mean:

42 - 41.11 = 0.89

40 - 41.11 = -1.11

38 - 41.11 = -3.11

26 - 41.11 = -15.11

42 - 41.11 = 0.89

46 - 41.11 = 4.89

42 - 41.11 = 0.89

50 - 41.11 = 8.89

44 - 41.11 = 2.89

Square each deviation:

[tex](0.89)^2[/tex] = 0.7921

[tex](-1.11)^2[/tex] = 1.2321

[tex](-3.11)^2[/tex] = 9.6721

[tex](-15.11)^2[/tex] = 228.6721

[tex](0.89)^2[/tex] = 0.7921

[tex](4.89)^2[/tex] = 23.8761

[tex](0.89)^2[/tex] = 0.7921

[tex](8.89)^2[/tex] = 78.9121

[tex](2.89)^2[/tex] = 8.3521

Find the sum of the squared deviations:

0.7921 + 1.2321 + 9.6721 + 228.6721 + 0.7921 + 23.8761 + 0.7921 + 78.9121 + 8.3521 = 352.8918

Calculate the sample variance, [tex]s^2[/tex], by dividing the sum of squared deviations by (n-1):

[tex]s^2[/tex] = 352.8918 / (9 - 1) = 44.1115 (rounded to four decimal places)

Calculate the sample standard deviation, s, by taking the square root of the sample variance:

s = √44.1115 ≈ 6.6419 (rounded to four decimal places)

To know more about mean refer here:

https://brainly.com/question/31101410#

#SPJ11

the values of h and k when the equation is written in vertex form a(x − h)^2 + k = 0  is (d) h = 1, k = 16.

To write the given quadratic equation [tex]4x^2 - 8x + 20 = 0[/tex] in vertex form, [tex]a(x - h)^2 + k = 0[/tex], we need to complete the square. The vertex form allows us to easily identify the vertex of the quadratic function.

First, let's factor out the common factor of 4 from the equation:

[tex]4(x^2 - 2x) + 20 = 0[/tex]

Next, we want to complete the square for the expression inside the parentheses, x^2 - 2x. To do this, we take half of the coefficient of x (-2), square it, and add it inside the parentheses. However, since we added an extra term inside the parentheses, we need to subtract it outside the parentheses to maintain the equality:

[tex]4(x^2 - 2x + (-2/2)^2) - 4(1)^2 + 20 = 0[/tex]

Simplifying further:

[tex]4(x^2 - 2x + 1) - 4 + 20 = 0[/tex]

[tex]4(x - 1)^2 + 16 = 0[/tex]

Comparing this to the vertex form, [tex]a(x - h)^2 + k[/tex], we can identify the values of h and k. The vertex form tells us that the vertex of the parabola is at the point (h, k).

From the equation, we can see that h = 1 and k = 16.

Therefore, the correct answer is (d) h = 1, k = 16.

To know more about equation visit:

brainly.com/question/649785

#SPJ11

As a newly hired analyst by the Department of Transportation (DoT) to analyze motorized vehicle traffic flows, my initial goal is to analyze the traffic and traffic delays in a large metropolitan area.

I would begin by collecting data on the number of vehicles on the road at different times of the day, traffic speed, traffic volume, and any other factors that may influence traffic. Analyzing this data will help me identify patterns and trends in traffic flows and identify areas where there may be delays. I would also consider factors such as road conditions, weather, and construction sites, which can affect traffic flows. After analyzing the data, I would create a report that highlights the key findings and recommendations to reduce traffic delays and improve traffic flows in the area. This report would be shared with the Department of Transportation (DoT) and other stakeholders to help inform future traffic management strategies.

To know more about traffic visit:

https://brainly.com/question/29989882

#SPJ11

Answer:

Step-by-step explanation:

You want the exact solutions on the interval [0, 2π) for the equations ...

It is helpful to write each equation in the form ...

  (trig function) = constant

Then the various solutions will be ...

  angle = (inverse trig function)(constant)

along with all other angles in the interval that have the same trig function value.

  cot(x) +3 = 2

  cot(x) = -1 . . . . . . . subtract 3

  x = arccot(-1) = -π/4

The cot function is periodic with period π, so we can add π and 2π to this value to see solutions in the interval of interest:

  x = 3π/4, 7π/4

  csc(x)² = 4 . . . . . add 10

  csc(x) = ±2 . . . . . square root

  sin(x) = ±1/2 . . . . relate to function values we know

  x = ±π/6

The sine function is symmetrical about x = π/2 and periodic with period 2π, so there are additional solutions:

  x = π/6, 5π/6, 7π/6, 11π/6

__

Additional comment

A graphing calculator can help you identify and/or check solutions to these equations. It conveniently finds x-intercepts, so we have written the equations in the form f(x) = 0, graphing f(x).

<95141404393>

1) Find all exact solutions on the interval 0 ≤ x < 2π. The given equation is cot(x) + 3 = 2To solve the given equation, we need to follow the following steps:

Step 1: Move 3 to the right side of the equation. cot(x) + 3 - 3 = 2 - 3 cot(x) = -1.

Step 2: Take the reciprocal of the equation. cot(x) = 1/-1 cot(x) = -1.

Step 3: Find the value of x. The reference angle of cot(x) is π/4. cot(x) is negative in second and fourth quadrants.

Therefore, in the second quadrant, the angle will be π + π/4 = 5π/4. In the fourth quadrant, the angle will be 2π + π/4 = 9π/4. Hence, the solutions are 5π/4 and 9π/4 on the interval 0 ≤ x < 2π. So, the required answer is (5π/4, 9π/4).2) Find all exact solutions on the interval 0 ≤ x < 2π.

The given equation is csc²(x) − 10 = −6To solve the given equation, we need to follow the following steps:

Step 1: Add 10 to both sides of the equation. csc²(x) = -6 + 10 csc²(x) = 4.

Step 2: Take the reciprocal of the equation. sin²(x) = 1/4.

Step 3: Take the square root of both sides of the equation. sin(x) = ±1/2.

Step 4: Find the value of x. Sin(x) is positive in first and second quadrants and negative in third and fourth quadrants.

Therefore, in the first quadrant, the angle will be π/6. In the second quadrant, the angle will be π - π/6 = 5π/6. In the third quadrant, the angle will be π + π/6 = 7π/6. In the fourth quadrant, the angle will be 2π - π/6 = 11π/6. Hence, the solutions are π/6, 5π/6, 7π/6, and 11π/6 on the interval 0 ≤ x < 2π. So, the required answer is (π/6, 5π/6, 7π/6, 11π/6).

To know more about interval visit:

https://brainly.com/question/11051767

#SPJ11      

The median value in this case is:(3 + 6) / 2 = 4.5 Therefore, the correct answer is option (c) 4.5.

We are given a density curve at y = one-third and it goes from 3 to 6.

We have to find the median value, which is also known as the 50th percentile of the distribution.

The median is the value separating the higher half from the lower half of a data sample. The median is the value that splits the area under the curve exactly in half.

That means the area to the left of the median equals the area to the right of the median.

For a uniform density curve, like we have here, the median value is simply the average of the two endpoints of the curve.

To know more about  curve visit:

https://brainly.com/question/32496411

#SPJ11

a. The probability that the grade is between 70 and 90 is 0.3023.

b. The probability that the grade is at least 70 is 0.3085.

c. The probability that the grade is at most 70 is 0.1915.

Suppose grades of an exam are normally distributed with a mean of 65 and a standard deviation of 10. If a student's grade is randomly selected, then the probability that the grade is a. between 70 and 90, b. at least 70, and c. at most 70 is given by;

Probability that the grade is between 70 and 90

We can find this probability by standardizing the given values of X = 70 and X = 90 to Z-scores.

The formula for standardizing a normal variable X is given by;Z-score (Z) = (X - µ) / σ

Where µ = mean of the distribution and σ = standard deviation of the distribution.

For X = 70,Z = (X - µ) / σ = (70 - 65) / 10 = 0.5

For X = 90,Z = (X - µ) / σ = (90 - 65) / 10 = 2.5

Using the Z-table, we find the probability as;P(0.5 ≤ Z ≤ 2.5) = P(Z ≤ 2.5) - P(Z ≤ 0.5) = 0.9938 - 0.6915 = 0.3023

b. Probability that the grade is at least 70

To find this probability, we can standardize X = 70 and find the area to the right of the standardized value, Z.

Using the formula for Z-score,Z = (X - µ) / σ = (70 - 65) / 10 = 0.5

Using the Z-table, we can find the area to the right of Z = 0.5 as 0.3085

c. Probability that the grade is at most 70

To find this probability, we can standardize X = 70 and find the area to the left of the standardized value, Z.Using the formula for Z-score,

Z = (X - µ) / σ = (70 - 65) / 10 = 0.5

Using the Z-table, we can find the area to the left of Z = 0.5 as 0.1915

Know more about the standard deviation

https://brainly.com/question/475676

#SPJ11

a) We have shown that n-1 (a, b, c) = (a-1, b, c) + (a, b-1, c) + (a, b, c-1) algebraically. b) Both sides of the equation represent the same combinatorial counting, which proves the equation.

(a) Algebraic Proof:

Starting with the left-hand side, n-1 (a, b, c):

Expanding it, we have n-1 (a, b, c) = (n-1)a + (n-1)b + (n-1)c.

Now, let's look at the right-hand side:

(a-1, b, c) + (a, b-1, c) + (a, b, c-1)

Expanding each term, we have:

(a-1)a + (a-1)b + (a-1)c + a(b-1) + b(b-1) + (b-1)c + ac + bc + (c-1)c

Combining like terms, we get:

a² - a + ab - b + ac - c + ab - b² + bc - b + ac + bc - c² + c

Simplifying further:

a² + ab + ac - a - b - c - b² - c² + 2ab + 2ac - 2b - 2c

Rearranging the terms:

a² + 2ab + ac - a - b - c - b² + 2ac - 2b - c² - 2c

Combining like terms again:

(a² + 2ab + ac - a - b - c) + (-b² + 2ac - 2b) + (-c² - 2c)

Notice that the first term is equal to (a, b, c) since it represents the sum of the original numbers a, b, c.

The second term is equal to (a-1, b, c) since we have subtracted 1 from b.

The third term is equal to (a, b, c-1) since we have subtracted 1 from c.

Therefore, the right-hand side simplifies to:

(a, b, c) + (a-1, b, c) + (a, b, c-1)

(b) Combinatorial Proof:

Let's consider a combinatorial interpretation of the equation a+b+c=n. Suppose we have n distinct objects and we want to partition them into three groups: Group A with a objects, Group B with b objects, and Group C with c objects.

On the left-hand side, n-1 (a, b, c), we are selecting n-1 objects to distribute among the groups. This means we have n-1 objects to distribute among a+b+c-1 spots (since we have a+b+c total objects and we are leaving one spot empty).

Now, let's look at the right-hand side:

(a-1, b, c) + (a, b-1, c) + (a, b, c-1)

For (a-1, b, c), we are selecting a-1 objects to distribute among a+b+c-1 spots, leaving one spot empty in Group A.

For (a, b-1, c), we are selecting b-1 objects to distribute among a+b+c-1 spots, leaving one spot empty in Group B.

For (a, b, c-1), we are selecting c-1 objects to distribute among a+b+c-1 spots, leaving one spot empty in Group C.

The sum of these three expressions represents selecting n-1 objects to distribute among a+b+c-1 spots, leaving one spot empty.

Hence, we have shown that n-1 (a, b, c) = (a-1, b, c) + (a, b-1, c) + (a, b, c-1) by a combinatorial proof.

To know more about equation:

https://brainly.com/question/10724260

#SPJ4

Suppose [tex]f(x,y,z)=x²y²z²[/tex] and w is the solid cylinder with height 5 and base radius 5 that is centered about the z-axis with its base at z = −1.

Let us evaluate the triple integral[tex]∭w f(x, y, z) dV[/tex]by expressing it in cylindrical coordinates.

The cylindrical coordinates of a point in three-dimensional space are represented by (r, θ, z).Here, the base of the cylinder is at z = -1, and the cylinder is symmetric about the z-axis. As a result, the range for z is -1 ≤ z ≤ 4. Because the cylinder is centered about the z-axis, the range of θ is 0 ≤ θ ≤ 2π.

The radius of the cylinder is 5 units, and it is centered about the z-axis. As a result, r ranges from 0 to 5.

To know more about radius visit:

https://brainly.com/question/13449316

#SPJ11

To find the coordinates of the center and the length of the radius of a circle given its equation, we need to rewrite the equation in the standard form (x - h)^2 + (y - k)^2 = r^2.

Where (h, k) represents the center of the circle and r represents the radius.

In the given equation x^2 + y^2 - 2x + 6y + 3 = 0, we can complete the square for both the x and y terms. Let's start with the x terms:

x^2 - 2x + y^2 + 6y + 3 = 0

(x^2 - 2x + 1) + (y^2 + 6y + 9) = 1 + 9

(x - 1)^2 + (y + 3)^2 = 10

Comparing this with the standard form, we can see that the center of the circle is at (1, -3) and the radius is √10.

Therefore, the coordinates of the center of the circle are (1, -3), and the length of the radius is √10.

To know more about coordinates click here: brainly.com/question/22261383

#SPJ11