Answer True or False for each of the following statements. (a) The carburization surface was maintained at slightly less than 0.25 wt% carbon for each specimen. (b) Comparing the finished specimens at a depth of 0.20 mm, specimen A features the lowest carbon concentration. (c) Comparing the finished specimens as a whole, specimen D features the lowest overall amount of carbon.

Answer:

Hi friend

I hope this image will help you if not I'm sorry

if this help you please mark me as brinalist or vote me.

Thankyou

Answer:

2.89x10⁻⁵M = [HPO₄²⁻]

Explanation:

The equilibrium of H3PO4 in water occurs H2PO4-:

H3PO4(aq) + H2O(l) ⇄ H3O⁺(aq) + H2PO4⁻(aq)

pKa = 2.16. And as pKa = -log Ka; Ka = 10^-2.16

Ka = 6.9183x10⁻³ = [H3O⁺] [H2PO4⁻] / [H3PO4]

As both [H3O⁺] and [H2PO4⁻] comes from the same equilibrium,

[H3O⁺]=[H2PO4⁻] :

[H3O⁺] = X

[H2PO4⁻] = X

[H3PO4] = 0.042 - X

Where X is reaction coordinate

Replacing:

6.9183x10⁻³ = [X] [X] / [0.042 - X]

6.9183x10⁻³ = X² / 0.042 - X

2.905686x10⁻⁴ - 6.9183x10⁻³X - X² = 0

Solving for X:

X = -0.02M. False solution. There is no negative concentration.

X = 0.014M. Right solution

[H2PO4⁻] = 0.014M

In the second equilibrium:

H2PO4⁻(aq) + H2O(l) ⇄ HPO4-(aq) + H3O+(aq)

Based on the same principles of the last equilibrium:

pKa2 = 7.21

Ka2 = 6.166x10⁻⁸ = [HPO4-] [H3O+] / [H2PO4⁻]

[HPO4-] = X

[H3O+] = X

[H2PO4⁻] = 0.014M - X

6.166x10⁻⁸ = X² / [0.014M - X]

8.3623x10⁻¹⁰ - 6.166x10⁻⁸X - X² = 0

Solving for X:

X = -0.0000289485. False solution.

X =

Saturated fatty acids lack double bonds between the individual carbon atoms, while in unsaturated fatty acids there is at least one double bond in the fatty acid chain. Saturated fats tend to be solid at room temperature and from animal sources, while unsaturated fats are usually liquid and from plant sources.

Answer:

hope it is helpful to you

☆☆☆☆☆☆☆☆☆

Answer:

Higher than the actual value

Explanation:

Titration is a volumetric process in which a known volume of solution is dispensed from a burette to react with a known volume of solution in a conical flask.

When acid-base titration is carried out in such a way that the base is in the burette and the acid is in the conical flask and drops of the base adhere to the inner walls of the flask, but do not actually mix with the solution, the calculated acid concentration would be higher than the actual value.

This is because;

From CA= CBVBnA/VAnB

When VB(volume of base) that reacted is lower than the actual volume recorded, then the calculated volume of CA(concentration of acid) is much higher than the actual value since drops of the base adhere to the inner walls of the flask.

answer; 1/ 20_2[2-] +2e - ->0.

Answer:

Scientific method.

Explanation:

Scientific method is the way taken to acquire scientific knowledge. It includes experiments, statistical analysis of existing data, and all kinds of observations of the world around us, while theoretical research is based on deriving certain theories about the world from basic principles, in a mathematical or logical way. The scientific method applies to both types of research, and emphasizes that scientific research is objective, that it can be verified by other scientists, and that knowledge is not acquired without context, but in a way that leads to a greater understanding of previous research and the world. we live in. To contribute to this, researchers are expected to clearly record both their findings and the methods they use to arrive at the results.

Answer: The fractional abundance of lighter isotope is 0.518

Explanation:

Average atomic weight is the sum of the masses of the individual isotopes each multiplied by its fractional abundance. The equation used is:[tex]\text{Average atomic weight}=\sum_{i=1}^{n}\text{(Atomic mass of isotope)}_i\times \text{(Fractional abundance)}_i[/tex]           ......(1)

Let the fractional abundance of Ag-107 isotope be 'x'

Atomic mass = 106.90509 amu

Fractional abundance = x

Atomic mass = 108.9047 amu

Fractional abundance = (1 - x)

Average atomic mass of silver = 107.8682 amu

Plugging values in equation 1:

[tex]107.8682=(106.90509 \times x) + (108.9047 \times (1-x))\\\\107.8682=106.90509x+108.9047-108.9047x\\\\1.99961x=1.0365\\\\x=0.518[/tex]

Fractional abundance of Ag-107 isotope (lighter) = x = 0.518

Hence, the fractional abundance of lighter isotope is 0.518

Answer:

.

Explanation:

Answer:

E°(Ag⁺/Fe°) = 0.836 volt

Explanation:

3Ag⁺ + 3e⁻ => Ag°;            E° = +0.800 volt

Fe° => Fe⁺³ + 3e⁻ ;             E° = -0.036 volt

_________________________________

Fe°(s) + 3Ag⁺(aq) => Fe⁺³(aq) + 3Ag°(s) ...    

E°(Ag⁺/Fe°) = E°(Ag⁺) - E°(Fe°) = 0.800v - ( -0.036v) = 0.836 volt

Answer:

all light waves can be described in terms of their speed, frequency and wavelength

Explanation:

Hope it helps u.....

Explanation:

Saturated fats are defined as the fat where fatty acid chains contain only single bonds.

For example, stearic acid, palmitic acid etc.

Unsaturated fats are defined as the fat where fatty acids contain one or more number of double bonds on the carbon atoms.

For example, oleic acid, palmitoleic acid etc.

Answer:

6.023*10^23........ .......

Answer:

Draw the skeletal structure for: (E)-hept-5-en-2-one

Explanation:

The root word hept indicates that the given compound has seven carons in its longest chain.

-en- primary suffix indicates that the compound has one double bond in it.

2-one indicates that the compound has -C=O bond in the second carbon.

The prefix (E) indicates that the highest priority groups are on the opposite direction of the double bond.

The structure of the given molecule is:

Answer:

43.0 L

Explanation:

Step 1: Given and required data

Step 2: Calculate the volume of the flask (V)

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L

The answer is 4.30 L

Answer:

For (1): The correct option is (a)

For (2): The correct option is (a) and 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts.

Explanation:

There are 2 types of reactions that are classified based on enthalpy change:

Endothermic reactions: These are the reactions where heat is absorbed by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is positive for these reactions.

Exothermic reactions: These are the reactions where heat is released by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is negative for these reactions.

For the given chemical reaction:

[tex]2NH_3(g)\rightarrow N_2(g)+3H_2(g);Delta H=160kJ[/tex]

As the change in enthalpy or heat of the reaction is positive. Thus, the reaction is an endothermic reaction because heat is absorbed by the reaction.

When ammonia reacts, some amount of heat will be absorbed by the reaction. Thus, we can say the heat will be absorbed.

The number of moles is calculated by using the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of ammonia = 70.9 g

Molar mass of ammonia = 17 g/mol

Using equation 1:

[tex]\text{Moles of ammonia}=\frac{70.9g}{17g/mol}=4.17mol[/tex]

By stoichiometry of the reaction:

If 2 mole of ammonia reacts, the heat absorbed is 160 kJ

So, if 4.17 moles of ammonia reacts, the heat absorbed will be = [tex]\frac{160kJ}{2mol}\times 4.17mol=333.6kJ[/tex]

Hence, 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts

Answer:

This is an oxidation-reduction (redox) reaction:

2 Ni0 - 4 e- → 2 NiII

(oxidation)

2 O0 + 4 e- → 2 O-II

(reduction)

Ni is a reducing agent, O2 is an oxidizing agent.

Acids have sour taste, low pH and dissolves metals.

The list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

An acid is a chemical substance that has the ability to donate hydrogen ions when involved in a chemical reaction.

The following are the characteristics or features of an acid:

Therefore, the list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

Learn more about acids here:

https://brainly.com/question/1302816

Answer:

19000 torr

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 0.150 L

Initial pressure (P₁) = 1520 torr

Final volume (V₂) = 0.012 L

Temperature = constant

Final pressure (P₂) =?

The final pressure of the gas can be obtained by using the Boyle's law equation as illustrated below:

P₁V₁ = P₂V₂

1520 × 0.150 = P₂ × 0.012

228 = P₂ × 0.012

Divide both side by 0.012

P₂ = 228 / 0.012

P₂ = 19000 torr

Thus, the final pressure of the gas is 19000 torr

Answer:

HCN, weak acid

H⁺, Br⁻, strong acid

Explanation:

Hydrocyanic acid is a weak acid, according to the following equation.

HCN(aq) ⇄ H⁺(aq) + CN⁻(aq)

Thus, it should be written in the undissociated form (HCN).

Hydrobromic acid is a strong acid, according to the following equation.

HBr(aq) ⇒ H⁺(aq) + Br⁻(aq)

Thus, it should be written in the ionic form (H⁺, Br⁻).

Answer: the molecular formula of  trioxide is ClOClO3 or Cl2O4

hope its helps you.

keep smiling be happy stay safe

Answer:

Mg3N2

Explanation:

it would be magnesium as it would loss to electron so it would have 10 electron. you can see in the picture above .

hope this helps :)

Answer:

Lower than

Higher than

Explanation:

The vapour pressure and boiling point of liquids are inversely related. Thus, the higher the vapour pressure of a liquid, the lower it's boiling point. Lower vapour pressure implies that the liquid is easily converted into vapour phase.

If hexane has a higher vapour pressure than water then its boiling point is lower than that of water and its vapor pressure when it is boiling will be higher than water when water is boiling.

Answer:

d.

Explanation:

H2 + Cl2 = 2HCL

From the equation 2g hydrogen combine with 71g of chlorine.

So 35.5 g Cl2 combines with 1g of H2

There are 100g of Cl2 so this will, by proportion, react with 100/35.5 g hydrogen.

This is 2.8 g hydrogen so the mass of HCl formed = 102.8 g.

The true statement is that d. between 100 and 190 g of HCl is produced.

To find mass of HCL:

H2 + Cl2 = 2HCL

From the equation, 2g of hydrogen combines with 71g of chlorine.

So 35.5 g Cl2 combines with 1g of H2

There are 100g of Cl2 so this will, by proportion, react with 100/35.5 g of hydrogen.

This is 2.8 g hydrogen so the mass of HCl formed = 102.8 g.

Hydrogen chloride may be formed by the direct combination of chlorine (Cl2) gas and hydrogen (H2) gas.

Learn more about Hydrogen chloride here: brainly.com/question/20323511

#SPJ2

Answer:

The answer is Iron.

Explanation:

I hope this helps you out. Have a nice day!

Answer:

3 > 2> 1

Explanation:

Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.

Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.

Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.

If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.

Answer:

qualatatiev is fs-hj_jakakak

Answer:

True

Explanation:

The length of covalent bond depends upon the size of atoms and the bond order.

Answer:

1.17 L of H₂

Explanation:

We'll begin by calculating the number of mole in 2.3 g of Mg. This can be obtained as follow:

Mass of Mg = 2.3 g

Molar mass of Mg = 24 g/mol

Mole of Mg =?

Mole = mass /molar mass

Mole of Mg = 2.3 / 24

Mole of Mg = 0.096 mole

Next, we shall determine the number of mole of H₂ produced by the reaction of 2.3 g (i.e 0.096 mole) of Mg. This can be obtained as follow:

Mg + 2HCl —> MgCl₂ + H₂

From the balanced equation above,

1 mole of Mg reacted to 1 mole of H₂.

Therefore, 0.096 mole of Mg will also react to produce 0.096 mole of H₂.

Finally, we shall determine volume of H₂ produced from the reaction. This can be obtained as follow:

Number of mole (n) of H₂ = 0.096 mole

Pressure (P) = 2 atm

Temperature (T) = 298 K

Gas constant (R) = 0.0821 atm.L/Kmol

Volume (V) of H₂ =?

PV = nRT

2 × V = 0.096 × 0.0821 × 298

Divide both side by 2

V = (0.096 × 0.0821 × 298) /2

V = 1.17 L

Therefore, 1.17 L of H₂ were obtained from the reaction.

Answer:

both

Explanation:

A homolytic fission is said to have occurred when the breakage of a bond between two atoms leaves each of the bonding atoms with equal number of electrons. Homolytic fission often results in the creation of radicals.

Since homolytic fission yields two species with equal number of electrons(usually odd number of electrons), the products of such process can not be charged. They can not be nucleophiles because nucleophiles need to possess two electrons which can be shared with another chemical specie.