Anwser this Question I will BrainElist You

Answer:

A stone floor feels very cold to bare feet in winter, but a carpet in the same room feels comfortably warm.This is because both the floor and the carpet have the same temperature as both are exposed to the same atmosphere. But the former conducts away the heat from the feet better than the carpet as the latter is a non-conductor. So the feet losing more heat, the floor appears cooler to the feet

Explanation:

Hope it may help you!!

Both actually have same temperature. Our feet are warm. Floor is conductor of heat while carpet is not. When we walk on floor, then floor takes away or conducts the heat from our feet, so we feel cold. While carpet doesn't do that, so we feel warm.

Answer:

Por ela ter batido na trave, não tem como voltar 2x mais forte, por que toda ação correspondente a uma reação de igual intensidade, mas que atua no sentido oposto

Explanation:

Answer:

20 = 30 / t1

t1 = 3/2

40 = 30 / t2

t2 = 3/4

average speed = total distance / total time taken

= 30 + 30 / 3/2 + 3/4

= 60 /9/4

= 60 × 4/9

= 26.667

Answer:

V²=U² + 2as

Where V=Final Velocity

U=Initial Velocity

a=acceleration ( Deceleration in this case)

s=distance covered

10² = 30² + 2(a)(20)

100 = 900 + 40a

100 - 900 = 40a

-800=40a

a= -800/40

a= -20ms-².

Its negative because the car Decelerated.

Answer:

electrons

In substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. When you rub a piece of iron along a magnet, the north-seeking poles of the atoms in the iron line up in the same direction. The force generated by the aligned atoms creates a magnetic field, hence it acts as a magnet.

the materials that can be magnetized this way are called ferromagnetic materials, but it is not permanent and after some times it loses all the magnetic properties.

please if you find this answer helpful mark it as brainliest

Magnets are formed from iron, nickel, or cobalt when the electrons in their atoms' outer energy levels line up in the same direction that is present in Option A, as the alignment creates a magnetic field that can attract or repel other magnets or magnetic materials.

At the atomic level, electrons orbit the nucleus in shells or energy levels, and electrons have a property called spin, which creates a tiny magnetic field around them. Normally, electrons in an atom have random spin directions, so their magnetic fields cancel each other out and the atom has no overall magnetic field. In some materials, such as iron, nickel, and cobalt, the electrons in the outer energy level can line up in the same direction, creating a net magnetic field. This is known as ferromagnetism.

Hence, magnets are formed from iron, nickel, or cobalt when the electrons in their atoms' outer energy levels line up in the same direction that is present in Option A,

Learn more about the magnets here.

https://brainly.com/question/13026686

#SPJ3

question is incomplete, complete question is below

Magnets are formed from iron, nickel, or cobalt when the ______________________ line up in the same direction.

A)electrons in their atoms' outer energy levels

B)proton explodes

Answer:

True

Explanation:

The team with the most points at the end of the game is the winner.

Answer:

(a) 12 m/s

(b) At t = 0, x'(t) = 0

At t = 5.0 s, x'(t) = 15 m/s

At t = 10.0 s, x'(t) = 12 m/s

(c) i. The initial velocity = 2.0 cm/s

The initial position = 50 cm

The initial acceleration = 0.125 cm/s²

ii. 16 seconds

2. (a) Approximately 0.85 m/s

(b) 2.094 J

(c) i. Approximately 49.74 m/s

ii. Approximately 86.38°

3. (i) 4·i + 5·j

(ii) -2·i - j - 2·k

(iii) 5·i + 4·j - 3·z

(iv) 8

(v) (a) The magnitude is 2.8 cm, the direction is East

(b) The magnitude is ((14·√3)/5) cm, the direction is North

(c)  The magnitude is ((14·√3)/5), the direction is South

Explanation:

x(t) is given as follows;

x(t) = b·t² - c·t³

Where;

b = 2.4 m/s(²) (we note that the unit of b for the term to be distance in m/s²)

c = 0.120 m/s³

(a) At t = 0, we have;

x(0) = b × 0² - c × 0³ = 0

At t = 10.0 s, we have;

x(10.0) = 2.4 m/s² × (10.0 s)² - 0.120 m/s³ × (10.0 s)³ = 120 m

The average velocity = (Total distance)/(Total time)

∴ The average velocity of the car for the time interval t = 0 to t = 10.0 s, [tex]v_{ave}[/tex], is given as follows;

[tex]v_{ave}[/tex] = (120 m - 0 m)/(10.0 s - 0 s) = 12 m/s

The average velocity of the car for the time interval t = 0 to t = 10.0 s, [tex]v_{ave}[/tex]  = 12 m/s

(b) The instantaneous velocity, [tex]v_{inst}[/tex], is given as follows;

[tex]v_{inst} = \lim \limits_{t \to 0} \left( v_{ave}\right) = \lim \limits_{t \to 0} \left( \dfrac{\Delta x}{\Delta t} \right) = \dfrac{dx}{dt} = x'(t)[/tex]

[tex]x'(t) = \dfrac{d\left (b \cdot t^2 - c \cdot t^3\right)}{dt}[/tex]

x'(t) = 2·b·t - 3·c·t²

At t = 0, x'(t) = 2 × b × 0 - 3 × c × 0² = 0

At t = 5.0 s, x'(t) = 2 × 2.4 m/s² × 5.0 s - 3 × 0.120 m/s³ × (5.0 s)² = 15 m/s

At t = 10.0 s, x'(t) = 2 × 2.4 m/s² × 10.0 s - 3 × 0.120 m/s³ × (10.0 s)² = 12 m/s

(c) x(t) = 50 cm + (2.0 cm/s)·t - (0.0625 cm/s²)·t²

i. The initial velocity is the instantaneous velocity, x'(t), at time, t = 0

x'(t) = 2.0 cm/s - 2 × 0.0625 cm/s² × t

At t = 0, x'(0) = 2.0 cm/s - 2 × 0.0625 cm/s² × 0 = 2.0 cm/s

The initial velocity, x'(0) = 2.0 cm/s

The initial position = The position at time t = 0 = x(0)

x(0) = 50 cm + (2.0 cm/s) × 0 - (0.0625 cm/s²) × 0² = 50 cm

The initial position, x(0) = 50 cm

The initial acceleration, x''(0) = 2 × 0.0625 cm/s² = 0.125 cm/s²

ii. x'(t) = 2.0 cm/s - 2 × 0.0625 cm/s² × t

When the velocity of the turtle, x'(t) = 0 we have;

0 = 2.0 cm/s - 2 × 0.0625 cm/s² × t

∴ t = (2.0 cm/s)/(2 × 0.0625 cm/s²) = 16 seconds

The velocity of the turtle is zero after 16 seconds

2. The mass of the large fish, m₁ = 15.0-kg

The speed of the large fish, v₁ = 1.1 m/s

The mass of the smaller fish, m₂ = 4.50 kg

The speed of the small (stationary) fish, v₂ = 0

The initial momentum = 15.0 kg × 1.1 m/s + 4.50 kg × 0 = 16.5 kg·m/s

The initial momentum = 16.5 kg·m/s

The final momentum = (15.0 kg + 4.50 kg) × v₃ = 19.50 kg × v₃

The final momentum = 19.50 kg × v₃

Where;

The total initial momentum = The total final momentum

We get;

16.5 kg·m/s = 19.50 kg × v₃

∴ v₃ = (16.5 kg·m/s)/(19.50 kg)

v₃ = (16.5/19.50) m/s = (11/13) m/s ≈ 0.85 m/s

∴ The speed of the large fish just after it eats the small, v₃ ≈ 0.85 m/s

(b) The initial kinetic energy, K.E.₁ = (1/2) × 15 kg × (1.1 m/s)² = 9.075 J

The final kinetic energy, K.E.₂ = (1/2) × 19.5 kg × (11/13 m/s)² = 363/52 J

The mechanical energy dissipated, ΔE = K.E.₁ - K.E.₂

ΔE = (9.075 - 363/42) J = 1089/520 J ≈ 2.094 J

The mechanical energy dissipated, ΔE = 2.094 J

(c) i. We have the total momentum = 110 × 8.8· j + 85 × 7.2· i = 9.680·i + 612·i

The velocity after collision, v = (9.680·i + 612·i)/(110 + 85) = 49.64·j + 3.14·i

The magnitude of the velocity, v = √(49.64² + 3.14²) ≈ 49.74 m/s

ii. The direction, θ = arctan(49.64/3.14) ≈ 86.38°

3. (i) [tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = (i + 2·j - k) + 3·i + 3·j + k = 4·i + 5·j

(ii) [tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = (i + 2·j - k) - (3·i + 3·j + k) = -2·i - j - 2·k

(iii) [tex]\underset{A}{\rightarrow} \times \underset{B}{\rightarrow}[/tex] = (2 + 3)·i - (1 + 3)·j + (3 - 6)·z = 5·i + 4·j - 3·z

(iv) [tex]\underset{A}{\rightarrow} \cdot \underset{B}{\rightarrow}[/tex] = 1×3 + 2 × 3 + (-1)×1 = 8

(v) (a) [tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = 2.8·cos(60°)·i + 2.8·sin(60°)·j + (2.8·cos(60°)·i - 2.8·sin(60°)·j

[tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = 5.6·cos 60°·i = 2.8·i

The magnitude = 2.8, the direction is east

(b) [tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = 2.8·cos(60°)·i + 2.8·sin(60°)·j - (2.8·cos(60°)·i - 2.8·sin(60°)·j

[tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = 5.6·sin(60°)·j= ((14·√3)/5)·j

The magnitude = ((14·√3)/5), the direction is North

(c)  [tex]\underset{B}{\rightarrow} - \underset{A}{\rightarrow}[/tex] = (2.8·cos(60°)·i - 2.8·sin(60°)·j - (2.8·cos(60°)·i + 2.8·sin(60°)·j)

[tex]\underset{B}{\rightarrow} - \underset{A}{\rightarrow}[/tex] = -5.6·sin(60°)·j= (-(14·√3)/5)·j

The magnitude = ((14·√3)/5), the direction is South

Answer:

EM

Explanation:

The index of refraction is a special property that shows how light travels through different medias. It does not concern itself with the spectrum, only what it will do to that spectrum under laboratory conditions.

Laser light is a very narrow concentrated light form. It is not the entire spectrum, but only a very small part of it.

The answer you want is EM Electromagnetic Radiation

Answer:

C option

Explanation:

Hope this helps... pls vote as brainliest

Answer:

Resistance is a measure of the opposition to current flow in an electrical circuit.All materials resist current flow to some degree. They fall into one of two broad categories: Conductors: Materials that offer very little resistance where electrons can move easily.

Answer:

From the base unit of length, we can define volume, and from the base units of length, mass, and time, we can define energy. ... Volume. Since volume is length cubed, its SI derived unit is m3

Explanation:

Hope it helps

Answer:

Explanation:

A galvanometer which is used for the measurement of a very small current can be converted to a voltmeter when it is connected to a high resistance or a multiplier is a series. The purpose of this is to reduce the amount of current that goes through the galvanometer so as prevent full scale deflection.

Answer:

1. A

2. B

Explanation:

Sound are mechanical waves that are highly dependent on matter for their propagation and transmission.

Sound travels faster through solids than it does through either liquids or gases.

Wavelength can be defined as the distance from one peak to the next peak of a waveform. This distance is also equal to the distance from one trough of a wave to another.

Diffraction is a wavelength property that makes it possible for sound to be heard around a bend. Thus, it's a property that causes a change in the direction of a wave as it travels through or around a barrier (obstacle) in its path.

Simply stated, diffraction involves the bending of waves around small obstacles with their dimensions smaller than or approximately equal to the wavelength of the sound wave.

On the other hand, reflection can be defined as a phenomenon which typically involves a change in the direction of a wave (bounces back) as it falls on a surface.

Hence, reflection is the property of sounds which animals such as bats use to detect their paths as they navigate from one point to another. This phenomenon is generally referred to as echolocation and it typically involves the use of reflection (echo) of sound to gain information about the nature and location of surrounding objects.

Answer:O que faz o longa se destacar é seu cenário mergulhado na cultura chinesa e a delicadeza com que o luto e sua superação são tratados.

Explanation:

Por que se você pensar ela estava sempre buscando superar a morte da mãe.

Answer:

power per square meter = 4.593 × 10^(6) W/m²

Wavelength of peak intensity = 9.67 × 10^(-7) m

Explanation:

From Stefan-Boltzmann law, total emitted power per square meter is given as;

P/A = eσT⁴

where;

P is power

A is surface area

σ = Stefan-Boltzmann constant = 5.67 × 10^(-8) W/m².k⁴

T = temperature of the body = 3000 K

e = emissivity of the substance (for ideal radiation, it has a value = 1)

Thus, Plugging in the relevant values we have;

P/A = 1 × 5.67 × 10^(-8) × (3000)^(4)

P/A = 4.593 × 10^(6) W/m²

Let's find the wavelength of peak intensity.

From wiens displacement law, we know that;

λ_m × T = b

where;

λ_m = maximum wavelength

T = Temperature

b is Wien's displacement constant = 2.9 × 10^(−3) m/K

thus;

λ_m = b/T = (2.9 × 10^(−3))/3000 = 9.67 × 10^(-7) m

Answer:

D.STATIC FRICTION

Explanation:

Have a nice day

Answer:

The accerlation is a derived from the other quantities like change in velocity/time take etc.

Answer:

Try different angles

Answer:

It will take 1 hr and 15 mins.

Explanation:

Let's look at the speed equation:

s=d/t

We want to find the time, and we have the speed and the distance, so we rearrange the equation. t will be on one side and s and d will be on the other side.

t=d/s

t=60km/(48km/h)

t=1.25h

Answer:

(a) 477 m

(b) 44.6 s

(c) 21.16 m

(d) 19.24 m

Explanation:

initial speed, u = 77km/h = 21.4 m/s

acceleration, a = - 0.48 m/s2

final speed v =  0  

(a) let the stopping distance is s.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s\\\\0 = 21.4^2 - 2 \times 0.48\times s\\\\s = 477 m[/tex]

(b) Let t is time.

Use first equation of motion

v = u + at

0 = 21.4 - 0.48 t

t = 44.6 s

(c) Let the distance is s in first second.

Use second equation of motion

[tex]s = u t + 0.5 at^2\\\\s = 21.4\times 1 - 0.5\times 0.48\times 1\\\\s = 21.4 - 0.24 = 21.16 m[/tex]

(d) distance traveled in 5 th second is given by

[tex]s = u + 0.5 a (2 n - 1) \\\\s = 21.4 - 0.5\times 0.48 \times (2\times 5 -1)\\\\s= 21.4 - 2.16 = 19.24 m[/tex]

Answer:

Ions are formed by the addition of electrons to, or the removal of electrons from, neutral atoms or molecules or other ions; by combination of ions with other particles; or by rupture of a covalent bond between two atoms in such a way that both of the electrons of the bond are left in association with one of the ..

Answer:

Ions are formed when atoms lose or gain electrons, simply when electrons from the metal transfers electrons from its outermost shell( forming a positively charged metallic ion) to the outermost shell of the non-metallic atom( forming a negatively charged ion)

Answer:

536 miles

Explanation:

If the airplane is running at a speed of 804 miles per hour, and covers a distance, x in a particular number of mile. The distance in mile can be gotten they the application of direct formula. Multiplying the speed by the time it took, and thus

804 mph * 40

Remember the time is in minutes and not hours, so, you convert it to hours.

804 * 40/60 hours =

536 miles

Answer:

-mg = -7.52*9.8 = - 73.696N

Answer:

See image

Explanation:

Plato

La respuesta correcta para esta pregunta abierta es la siguiente.

A pesar de que no anexas opciones o incisos para responder, podemos comentar lo siguiente.

La importancia de las capacidades físico-motriz que se desarrollan en el futbol de salón son determinantes para desarrollar o maximizar las actividades propias de este deporte con objeto de rendir al máximo y aspirar al mejor de los resultados.

Estas capacidades físico-motrices son las que le permiten a un jugador realizar su máximo esfuerzo, mejorar su desempeño físico y conseguir resultados positivos.

Estamos hablando de la fuerza, la velocidad y la resistencia.

La velocidad es la aceleración que el jugador de futbol necesita para aumentar su velocidad de un punto A, a un punto B, en el menor tiempo posible.

La resistencia es la capacidad del jugador de futbol para mantener ese nivel de aceleración y desempeño, sin bajar su rendimiento. Su capacidad física debe ser resistente para ser constante en su rendimiento físico.

La fuerza es la potencia con la que desempeña los movimiento físicos dentro de la cancha.

Answer:it’s 400 meters

Explanation:

Answer:

B

Explanation:

Calculate the kinetic energy before and after they hold hands. Then, to find the change in kinetic energy simply subtract the final KE by initial KE.

Answer:

11. Food Chain

12. Food web

13. Habitat

Explanation:

The difference between food chain and food web is;

In a food chain, it shows one path of energy in one ecosystem.

In a food web, it shows various food chains in many ecosystems and how they are connected.

Answer:

the thin steel wall because that wall is so very to fast broke

Answer:

ans: 13.53 × 10^17 Newton