Answer: The mass of copper liberated is 0.196 g.
Explanation:
The oxidation half-reaction of copper follows:
[tex]Cu\rightarrow Cu^{2+}+2e^-[/tex]
Calculating the theoretical mass deposited by using Faraday's law, which is:
[tex]m=\frac{M\times I\times t(s)}{n\times F}[/tex] ......(1)
where,
m = actual mass deposited = ? g
M = molar mass of metal = 63 g/mol
I = average current = 2 A
t = time period in seconds = 5 min = 300 s (Conversion factor: 1 min = 60 sec)
n = number of electrons exchanged = 2
F = Faraday's constant = 96500 C/mol
Putting values in equation 1, we get:
[tex]m=\frac{63 g/mol\times 2A\times 300s}{2\times 96500 C/mol}\\\\m=0.196g[/tex]
Hence, the mass of copper liberated is 0.196 g.
Which labels are correct for the regions marked? a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium b. X: Faster in gases than liquids Y: Slowest in solids Z: Faster in liquids than gases c. X: Slower in solids than liquids Y: Velocity depends on medium Z: Faster in liquids than gases d. X: Velocity depends on medium Y: Fastest in gases Z: Slower in liquids than solids
Answer:
a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium.
Explanation:
Speed of sound is fastest in solids. Sound waves travel more quickly in solid, than of liquid and gases. Sound waves travel most slowest in gases. Speed of sound varies significantly and it depends upon medium it is travelling through. In more rigid medium sounds velocity will be faster.
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
a uniform meter ruler is balanced at its midpoint
Answer:
a) i) x = 0.25 m, ii) x = 0.10 m, iii) x = 0.050 m
b) i) x = 0.40 m
Explanation:
a) For this exercise we use the rotational equilibrium equation, where we assume that the anticlockwise rotations are positive.
1) L = 2W
we set our reference system in the center of the bar where the fulcrum is
∑τ = 0
W 0.50 - L x = 0
x = 0.50 W / L
we substitute the value
x = 0.50 W / 2W
x = 0.25 m
ii) L = 5W
we calculate
x = 0.50 W / 5W
x = 0.10 m
iii) L = 10 W
x = 0.50 W / 10W
x = 0.050 m
b) a new weight is placed at x₂ = 30 cm on the left side
W 0.50 + W 0.30 - L x = 0
x = (0.50 + 0.30) W / L
x = 0.80 W / L
we calculate
i) L = 2W
x = 0.80 w / 2w
x = 0.40 m
List out the fundamental and derived units
How would you find the resistance of a parallel circuit with n identical resistors?
9514 1404 393
Answer:
R/n
Explanation:
For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...
Reff = V/I = V/(nV/R)
Reff = R/n
A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark.Assume each tick mark represents 1 cm.Calculate the total displacement from 0 if an object moves 3 cm to the left, then 7 cm to the right, and then 6 cm to the left.The object moves cm to the left.What is the total distance the object travels? cm
Answer:
16 cm
Explanation:
Given that,
The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.
Let the x-axis to be the +ve and on the right side and -ve on the left
Thus, displacement would be:
= 0 -3 + 7 -6
= -2 cm
This implies that the object displaces 2cm towards the left.
While the total distance covered by the object equal to,
= 0cm + 3cm + 7cm + 6cm
= 16 cm
Thus, 16 cm is the total distance.
Answer:
Its 2 to the right
Explanation:
edge :p
49. A block is pushed across a horizontal surface with a
coefficient of kinetic friction of 0.15 by applying a
150 N horizontal force.
(a) The block accelerates at the rate of 2.53 m/s2
Find the mass of the block.
(b) The block slides across a new surface while
experiencing the same applied force as before.
The block now moves with a constant speed.
What is the coefficient of kinetic friction between
the block and the new surface?
Answer:
(a) 37.5 kg
(b) 4
Explanation:
Force, F = 150 N
kinetic friction coefficient = 0.15
(a) acceleration, a = 2.53 m/s^2
According to the newton's second law
Net force = mass x acceleration
F - friction force = m a
150 - 0.15 x m g = m a
150 = m (2.53 + 0.15 x 9.8)
m = 37.5 kg
(b) As the block moves with the constant speed so the applied force becomes the friction force.
[tex]F = \mu m g \\\\150 = \mu\times 37.5\\\\\mu = 4[/tex]
Which statement should he place in the region marked X?
Explanation:
The answer is Electrons move between objects.
Compared with dim light, what do light waves that look bright tend to have the subject just says science but the picker doesn't have that
Answer:
The brightness of a light depends on the amplitude of the light wave, which is the extent the waves moves from their equilibrium position. The brightness is also related to the amount of light that is emitted or reflected by an object
Therefore, compared to dim light, light that look bright have a higher amplitude and emit or reflect more light energy (photons)
Explanation:
health ,population and environment education is for the enrichment of quality of life,justify the statement
Answer:
hey !! here is a short and sweet answer to your question
=quality of life is directly determined by health ,education ,and life expectacy
=health Is a type of thing that gives employment to the person working in firm
hope u understand
Explanation:
An unbalanced 6.0-newton force acts eastward on an object for 3.0 seconds. The impulse
produced by the force is
18 N:s east
2 Nós east
18 N:s west
2 Nis west
The boiling point of water is 1000 C at sea level. The boiling point of butane is -1.50C… If we leave liquid butane in a bowl on a table in a room where the temperature is 240C, butane will
A. evaporate.
B. condense.
C. freeze.
D. melt.
Answer: If we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.
Explanation:
A temperature at which the the liquid and gaseous phase of a substance of a substance are present in equilibrium with each other is called boiling point.
For example, the boiling point of butane is -1.5 degree Celsius.
This means that at a temperature above -1.5 degree Celsius, butane will exist is gaseous state. That is, at a temperature of 24 degree Celsius butane will evaporate.
Thus, we can conclude that if we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
please answer quick for brainlist ; )
Answer:
The diagram assigned B
explanation:
Check the direction of the two vectors, their resultant must be in the same direction.
Raquel establece que la rapidez del sonido en el aire en un día es de 346 m/s . Días después hace la misma medición obteniendo una rapidez de 340 m/ s . ¿Cuál será la temperatura del aire en cada día?
Answer:
La ecuación para la velodiad del sonido en aire esta dada por:
[tex]v = \sqrt{ \frac{\gamma*R*T}{M} }[/tex]
Resolviendo esto para T, obtenemos:
[tex]T = v^2*(\frac{M}{\gamma*R} )[/tex]
donde:
T = temperatura del aire en grados Kelvin
γ = constante adiabatica = 1.4
R = constante del gas ideal =
M = masa molar del aire = 29*10^(-3) kg/mol
Si sabemos que el primer día la velocidad es 346 m/s, tenemos:
v = 346 m/s
Ahora podemos reemplazar todos esos valores en la ecuación para T, y asi obtener:
[tex]T = (346m/s)^2*(\frac{29*10^{-3}kg/mol}{1.4* 8.31 J/mol*K} ) = 298.42 K[/tex]
Para el segundo día la velocidad es 340 m/s, entonces ese día la temperatura va a ser:
[tex]T = (340m/s)^2*(\frac{29*10^{-3}kg/mol}{1.4* 8.31 J/mol*K} ) = 288.16 K[/tex]
A wire, 20m long, is heated from a temperature of 5°C to 55°C. If the change in length is 0.020m, calculate the linear expansivity of the wire.
Answer:
0.01998⁰C;¹
Explanation:
you can see all steps in photo
HELPPPPPPPPPPP PLEASEEEEEEEEEEE
Complete this sentence. The solubility of a sample will ____________ when the size of the sample increases.
stay the same
decrease
increase
be unable to be determined
the answer is not decrease
The solubility of the sample will decrease
Describe the advantages and disadvantage is of living in a floodplain
Answer:
:) :::::::::::::::::::::::::::::::))))
why physics ought to be studied?
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
If we go on the top of the Mountain we will our weight increase or decrease?
Answer:
increase
Explanation:
guesshejwoowsnnsnakalalapqjhdjd
Answer:
our weight would decrease.
Explanation:
because of you burning all those calories and fat from hiking up the mountain.
2 What are(i) free fall , (ii) acceleration due to gravity, (iii) escape velocity , (iv) centripetal force?
Answer:
Explanation:
1. Free fall implies an object falling under the gravitational influence only. During the flight, no other force acts on it except the gravitational pull.
2. Acceleration due to gravity is the earth's natural force of pull on all objects on its surface, close to its surface, or in the region where the force can be felt. This force pulls object to the surface of the earth.
3. Escape velocity is the required minimum velocity for an object to leave the gravitational influence of the earth. It has a constant value which can be determined by;
Escape velocity = [tex]\sqrt{2gR}[/tex]
where g is the gravitation force of the earth and R is the radius of the earth.
4. Centripetal force is the force of pull that is required to keep a rotation object in its curved path.
The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)
Answer:
2000g
Explanation:
volume=mass/density
=2000/2.5
=800cm³
mass=density×volume
=800×2.5
=2000g
The gravitational force acting on various masses is measured on different planets. Measured values for the forces acting on the corresponding masses are shown in the data table. Analyze the data and develop a method for comparing the gravitational field strengths on the different planets. Use your method to compare the gravitational field strengths, and report your conclusions.
If Cl− is the only anion in the solution, what is the Cl− concentration in milliequivalents per liter?
Answer:
155mEq/L Cl-
Explanation:
A Ringer’s solution contains the following concentrations of cations: 146 mEq/L of Na+, 5 mEq/L of K+, and 4 mEq/L of Ca2+.
As Cl- is the only counterion of those cations:
For Na, the molecule is NaCl and the mEq/L of Cl- = mEq of Na+. The Cl- of the first ion is 146mEq/L Cl-
For K+, The molecule is KCl, mEq Cl- = 5mEq/L Cl-
And, for Ca2+, The molecule is CaCl2 but the equivalents of Ca2+ = Equivalents of Cl- = 4mEq/L Cl-
The total concentration of Cl- are:
146 + 5 + 4 =
155mEq/L Cl-The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
Magnetic force between the north poles of two magnets is
Magnetic force between the north poles of two magnets is REPULSIVE
Answer:Repulsion or attraction
Explanation:The angle between the compass needle and geographic north is called the MAGNETIC DECLINATION.(see earth:the magnetic field of the earth ). The repulsion or attraction between two magnetic dipoles can be viewed as the interaction of one dipole with the magnetic field produced by other dipole.
What is physical measurement? in Science
Answer:
physical measurement comprises the measurement of objects, things, etc. and is concerned with the measurement of height, weight, length, size, volume etc.
is the answer correct or wrong
Answer:
wrong answer because m=100
Explanation:
I think it is incorrect
Ah, I tried
Does anyone know the answer ? I forgot my calculator.
12 x sin50
12 × sin50 = 9.192533317........
I have possess'd your grace of what I purpose:And by our holy Sabbath have I swornTo have the due and forfeit of my bond.If you deny it, let the danger lightUpon your charter and your city's freedom !You'll ask me, why I rather choose to haveA weight of carrion flesh than to receiveThree thousand ducats : I'll not answer that:But, say, it is my humour(1) Whom are these lines addressed to? What is the context in which theselines are spoken?(ii) What has Shylock sworn on oath ?
Answer:
1. These lines are addressed to Duke.
2. These lines show that Shylock is not willing to forgive the debt a merchant owes him, nor is he willing to justify why he demands that debt be paid, even if it seems cruel.
3. He swore by the Holy Sabbath, which is a holy day for him, who is a Jew. He swore he would get the debt money or a piece of the debtor's flesh.
Explanation:
The lines shown in the question above refer to "The Merchant of Venice" written by Shakespeare. In this story we are introduced to Antonio, a commercial who is very prejudiced against Jews, but when he needs money, he borrows from another merchant, Shylock, who is Jewish. Shylock agrees to lend money to Antonio, but determines the date that this money must be returned, in addition, Shylock states that he will lend the money if Antonio agrees that if this money is not paid by the specified date, Antonio will have to pay with half a kilo of flesh from his own body. Antonio agrees, but doesn't pay the money so Shylock goes after the flesh of Antonio's body and Duke tries to intervene because he thinks this is too cruel. At this point, Shylock speaks the lines shown in the question above, showing that he is not willing to change his mind.
