Answer:
d. 2.94%
Explanation:
First, Calculate the Yield to maturity of the bond using the following formula
Use the following formula to calculate the YTM
P = [ C x ( 1 - ( 1 + r )^-n ) / r ] + [ F / ( 1 + r )^n ]
Where
F = Face value = $1,000
P = Price = $1,495.56
C = Coupon payment = Face value x Coupon rate = $1,000 x 10% = $100
n = numbers of periods = Numbers of years to maturity = 10 years
r = YTM = ?
Placing values in the formula
$1,495.56 = [ $100 x ( 1 - ( 1 + r )^-10 ) / r ] + [ $1,000 / ( 1 + r )^10 ]
r = 3.916%
Now calculate the after-tax cost of debt
After-tax cost of debt = YTM x ( 1 - Tax rate )
After-tax cost of debt = 3.916% x ( 1 - 25% )
After-tax cost of debt = 2.937%
After-tax cost of debt = 2.94%
Project managers can identify risks by learning and understanding the cause and effect relationships that bear on risk events. All of the following approaches rely upon an understanding of cause and effect relationships to identify risks EXCEPT:
a. perform a Monte Carlo analysis
b. understand trigger conditions, or circumstances under which a risk strategy or risk action will be invoked
c. conduct a root cause analysis
d. develop a flow chart that shows how people, materials or data flow from one person or location to another
Answer:
Interviews. Select key stakeholders. ...
Brainstorming. I will not go through the rules of brainstorming here. ...
Checklists. See if your company has a list of the most common risks. ...
Assumption Analysis. ...
Cause and Effect Diagrams. ...
Nominal Group Technique (NGT). ...
Affinity Diagram.
Explanation:
Create a risk register. Create a risk register for your project in a spreadsheet. ...
Identify risks. ...
Identify opportunities. ...
Determine likelihood and impact. ...
Determine the response. ...
Estimation. ...
Assign owners. ...
Regularly review risks.
On June 1, 2019, Irene places in service a new automobile that cost $21,000. The car is used 70% for business and 30% for personal use. (Assume this percentage is maintained for the life of the car.) She does not take additional first-year depreciation. Determine the cost recovery deduction for 2020.
Answer:
the cost recovery deduction for 2020 is $4,704
Explanation:
The calculation of the cost recovery deduction is given below:
According to the MACRS depreciation table, the second year depreciation rate should be 32%
So, the cost recovery deduction should be
= 32% of 70% of $21,000
= $4,704
Hence, the cost recovery deduction for 2020 is $4,704
Therefore the same should be considered
Inflation is noted as having a correlation with positive economic growth. People can receive a better education and do which of the following with a small level of inflation?
Answer:
increase their income
Explanation:
Which 2 statements are true regarding Intuit-approved QuickBooks Online apps?
Answer: • You or your client can add apps to the client's account
• They must be available via the Apps screen in QuickBooks Online Accountant or apps.com
Explanation:
You didn't give the options to the questions but I got the options online. Quickbook refers to an accounting software package that is used by businesses to pay bills, accept payments, do payroll functions etc.
The correct statements regarding Intuit-approved QuickBooks Online apps include:
• You or your client can add apps to the client's account.
• They must be available via the Apps screen in QuickBooks Online Accountant or apps.com
Answer:
They must be developed by Intuit
The must be available via the Apps screen in QuickBooks Online Accountant or apps.com
Explanation:
QuickBooks Online.com
A sporting equipment store expects to purchase $8,200 of ski boots in October. The store had $2,800 of ski boots in merchandise inventory at the beginning of October, and expects to have $1,800 of ski boots in merchandise inventory at the end of October to cover part of anticipated November sales. What is the budgeted cost of goods sold for October?
a) $7,000.
b) $9,000.
c) $8,000.
d) $12,000.
e) $11,000.
Answer:
$9,200
Explanation:
Calculation to determine the budgeted cost of goods sold for October
Using this formula
Budgeted cost of goods sold for October =Cost of ski boots + Inventory at the beginning - Inventory at the end
Let plug in the formula
Budgeted cost of goods sold for October = $2800 + $8200 - $1800
Budgeted cost of goods sold for October= $9200
Therefore the budgeted cost of goods sold for October is $9,200
g If there is a breach of contract, the objective of the remedy in the breach contract case will be to: Question 21 options: place the parties back into the position that they would have been in had there been no contract punish the party that committed breach of contract provide both parties relief place the non breaching party into the position that they would have been had the contract not been breached
Answer: place the non breaching party into the position that they would have been had the contract not been breached
Explanation:
A contract is meant to satisfy the reasons for which the contract was gone into for both parties. If one party breaches the contract, the party that did not breach should still have their reason for entering the contract satisfied because they did what they were supposed to do according to the contract.
This is why the purpose of a breach of contract remedy is to ensure that this non-breaching party does indeed get what was supposed to come to them by the contract.
Madison Corporation sells three products (M, N, and O) in the following mix: 3:1:2. Unit price and cost data are: M N OUnit sales price$12 $10 $11Unit variable costs 9 8 9Total fixed costs are $585,000. The selling price per composite unit for the current sales mix (rounded to the nearest cent) is:
Answer:
Selling price per composite unit= $11.3
Explanation:
Giving the following information:
Madison Corporation sells three products (M, N, and O) in the following mix: 3:1:2.
Unit price and cost data are: M N OUnit sales price$12 $10 $11
First, we need to calculate the sales proportion for each product:
M= 3/6= 0.5
N= 1/6= 0.17
O= 2/6= 0.33
Now, the selling price per composite unit:
Selling price per composite unit= (0.5*12) + (0.17*10) + (0.33*11)
Selling price per composite unit= $11.3
What is the present value of an annuity that pays $58 per year for 13 years and an additional $1,000 with the final payment
Answer:
$882.03
Explanation:
Interest rate used is 7.23%
Present value is the sum of discounted cash flows
Present value can be calculated using a financial calculator
Cash flow in year 1 to 12 = 58
cash flow in year 13 = 1058
I = 7.23
To find the PV using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
Question 4
Which of the following is an example of an asset?
A. Repairs and Maintenance
B. Accounts Receivable
C. Accounts Payable
D. GST Collected
Answer:
Accounts Receivable
Explanation:
A is an expense, C and D are liabilities
Tim is a single father with 1 child. He can work as a bagger at the local grocery store for $6 per hour up to 1,200 hours per year. He is eligible for welfare, and if he does not earn any income, he will receive $15,000 a year. If Tim works, the government policy is to deduct 60 cents from his welfare stipend for every $1 that he earns in income. This government policy provides a monetary incentive to work, because
Answer:
The more he works, the higher Tim's salary level. A further explanation is provided below.
Explanation:
Throughout this instance, we must look at Tim's degree of labor as well as his revenue.
Tim would then earn $15,000 if he doesn’t really perform, then he can make,
= [tex]6\times 1200[/tex]
= [tex]7200 \ per \ year[/tex]
60 per cent of its revenue as well from his assistance fund would be deducted by the administration.
= [tex]15000-0.60\times 7200[/tex]
= [tex]10680[/tex]
Now,
His total income will be:
= [tex]10680+7200[/tex]
= [tex]17880[/tex]
Thus the above is the correct answer.
TB MC Qu. 08-152 Minor Company installs a machine... Minor Company installs a machine in its factory at the beginning of the year at a cost of $135,000. The machine's useful life is estimated to be 5 years, or 300,000 units of product, with a $15,000 salvage value. During its first year, the machine produces 64,500 units of product. Determine the machines' first year depreciation under the double-declining-balance method.
Answer:
The correct answer is "$54000".
Explanation:
According to the question,
Annual depreciation rate will be:
= [tex]\frac{100 \ percent}{5}[/tex]
= [tex]20[/tex] (%)
hence,
The depreciation as per double decline will be:
= [tex]2\times Annual \ depreciation \ rate\times Beginning \ value[/tex]
By putting the values, we get
= [tex]2\times 20 \ percent\times 135000[/tex]
= [tex]54000[/tex] ($)
Town Crier has 6.7 million shares of common stock outstanding, 3.7 million shares of preferred stock outstanding, and 27.00 thousand bonds. If the common shares are selling for $29.80 per share, the preferred share are selling for $17.20 per share, and the bonds are selling for 96.83 percent of par, what would be the weight used for common stock in the computation of Town Crier's WACC
Answer:
0.2488
Explanation:
Calculation to determine what would be the weight used for common stock in the computation of Town Crier's WACC
Using this formula
WACC=(shares of preferred stock outstanding*preferred share are selling per share)/(shares of common stock outstandin*common shares are selling for per share,)+(shares of preferred stock outstanding*preferred share are selling per share)+ (bonds amount*bonds selling percent of par*1,000)
Let plug in the morning
WACC=(3.7 million *$17.20)/(6.7 million x$29.80)+(3.7 million *$17.20)+27.00 thousand bonds*96.83 percent*1,000
=$63,640,000/($199,660,000+$26,144,100)
=$63,640,000/$255,804,100
=0.2488*100
=24.88%
Therefore what would be the weight used for common stock in the computation of Town Crier's WACC is 24.88%
Vaughn Manufacturing is unsure of whether to sell its product assembled or unassembled. The unit cost of the unassembled product is $24 and Vaughn would sell it for $51. The cost to assemble the product is estimated at $14 per unit and the company believes the market would support a price of $61 on the assembled unit. What decision should Vaughn make?
Answer:
Sell before assembly, The company will be better off by $4 Per Unit
Explanation:
Calculation to determine what decision should Vaughn make
PROFIT BEFORE ASSEMBLY
Profit = Sale price - Cost price
Profit= $51 - $24
Profit= $27 Per Unit
PROFIT AFTER ASSEMBLY
First step is calculate the Cost of Assembled Product
Cost of Assembled Product =$24 + $14
Cost of Assembled Product= $38 Per Unit
Now let determine the profit
Profit = Sale price - Cost price
Profit= $61 - $38
Profit = $23 Per Unit
Now let Determine what decision should Vaughn make
Hence, the Profit by selling assembled product is LOWER than selling the Unassembled product by :
$27 Per Unit - $23 Per Unit
= $4 Per Unit
Therefore the decision that Vaughn should make is: Sell before assembly, The company will be better off by $4 Per Unit
Meyer Company reported the following for its recent year of operation:
From Income Statement:
Depreciation Expense $1,000
Loss on the Sale of Equipment (3,000)
From the comparative balance sheet:
Beginning balance, equipment $12,500
Ending balance, equipment 8,000
Beginning balance, accumulated depreciation 2,000
Ending balance, accumulated depreciation 2,600
No new equipment was purchased during the year. What was the selling price of the equipment?
Answer:
$900
Explanation:
Calculation to determine the selling price of the equipment
First step
Cost of equipment sold = Beginning balance - Ending balance
Cost of equipment sold=$12,500-$8,000
Cost of equipment sold=$4,500
Second step
Ending balance= Beginning balance + Depreciation expense - Accumulated depreciation on equipment sold
Ending balance=$2,000+$1,000-$600
Ending balance=$2,400
Third step
Book value = Cost of equipment sold - Accumulated depreciation on equipment sold
Book value=$4,500-$600
Book value=$3,900
Now let determine the selling price of the equipment
Selling price=$3,000-$3,900
Selling price=$900
Therefore the selling price of the equipment.is $900
Which of the following food borne illness has a preventative vaccine
A. E.coli
B.norovirus
C. Hep. A
D. Shigella
Answer:
C. Hep. A
Explanation:
From the available options, Hep. A is preventable with a vaccine. The vaccine was created in 1995. It is administered to individuals in two seperate doses and usually done with a time span of 6 months between dose. Having both doses administered helps prevent the individuals from the Hep. A virus long term. Like most vaccines, this one has a 95% effectiveness for preventing the virus from affecting the individual's body.
An electronics company makes communications devices for military contracts. The company just completed two contracts. The navy contract was for 2,540 devices and took 27 workers two weeks (40 hours per week) to complete. The army contract was for 5,940 devices that were produced by 37 workers in three weeks (40 hours per week). a. Calculate the productivity for navy and army contracts in units produced per labor hour.
Answer:
Explanation:
For Navy contract, the total number of man hours put into production will be:
= 27 × 40 × 2
= 2160 man hours
Then, the units produced per labor hour will be:
= 2540 devices / 2160
= 1.176 units per labor hour.
For Army contracts, the total number of man hours put into production will be:
= 37 × 40 × 3
= 4440 man hours
Then, the units produced per labor hour will be:
= 5940/4440
= 1.338 units per labor hour.
On January 1, 20X1 when the effective interest rate was 14%, a company issued bonds with a maturity value of $1,000,000. The stated rate of interest is 12%, the bonds pay interest semi-annually and sold for $893,640. The amount of bond discount amortized on July 1, 20X1 is approximately:__________.
Answer: $2,555
Explanation:
Bond discount amortization = Interest cost - Coupon payment
Coupon payment = Stated interest * Par value
= 12% * 1,000,000 * 6/12 months
= $60,000
Interest cost = Issue price * effective interest
= 893,640 * 14% * 6/12
= $62,554.80
Amortized amount:
= 62,554.80 - 60,000
= $2,554.80
= $2,555
Ida Sidha Karya Company is a family-owned company located in the village of Gianyar on the island of Bali in Indonesia. The company produces a handcrafted Balinese musical instrument called a gamelan that is similar to a xylophone. The gamelans are sold for $910. Selected data for the company’s operations last year follow: Units in beginning inventory 0 Units produced 310 Units sold 280 Units in ending inventory 30 Variable costs per unit: Direct materials $ 130 Direct labor $ 350 Variable manufacturing overhead 50 Variable selling and administrative 40 Fixed costs: Fixed manufacturing overhead $ 62,000 Fixed selling and administrative $ 26,000 The absorption costing income statement prepared by the company’s accountant for last year appears below: Sales $ 254,800 Cost of goods sold 204,400 Gross margin 50,400 Selling and administrative expense 37,200 Net operating income 13,200Required:1. Determine how much of the ending inventory consists of fixed manufacturing overhead cost deferred in inventory to the next period.Total fixed manufacturing overhead in ending inventory: ?2. Prepare an income statement for the year using variable costing.
Answer:
1. 6,000
2. 7,200
Explanation:
1. Calculation to determine how much of the ending inventory consists of fixed manufacturing overhead cost deferred in inventory to the next period.
Using this formula
Ending inventory=Fixed manufacturing overhead/Units produced*Ending units
Let plug in the formula
Ending inventory=62,000/310*30
Ending inventory=6,000
Therefore how much of the ending inventory consists of fixed manufacturing overhead cost deferred in inventory to the next period is 6,000
2. Preparation of an income statement for the year using variable costing.
IDA SIDHA KARYA Company Variable Costing Income Statement
Units produced cost (130+350+50=530)
Sales $254,800
(280*910)
VARIABLE EXPENSES:
Variable cost of goods sold $148,400
(280*530)
Variable selling and administrative expense $11,200
(280*40)
Contribution margin $95,200
($254,800-$148,400-$11,200)
FIXED EXPENSES:
Fixed manufacturing overhead $62,000
Fixed selling and administrative expense $26,000
Net operating income $7,200
($95,200-$62,000-$26,000)
Therefore the income statement for the year using variable costing is $7,200
Pencils sell for 10 cents and pens sell for 50 cents. Suppose Jae, whose preferences satisfy all of the basic assumptions, is currently spending all his income on both goods. The marginal rate of substitution for pens to pencils is 5. In order to achieve optimum, what should he do
Answer:
Jae should do nothing and continue purchasing the same amount of pens and pencils.
Explanation:
The current rate of substitution that maximizes Jae's utility is Px / Py = 0.50 / 0.10 = 5. That means that Jae will purchase 5 pencils for every pen that he buys, and that is exactly what he is doing right now.
What are targets for a business to achieve?
A. Objectives
B. Smart goals
C. Social enterprises
D. Profits
bRamapo Company produces two products, Blinks and Dinks. They are manufactured in two departments, Fabrication and Assembly. Data for the products and departments are listed below. Product Number of Units Direct Labor Hours Per Unit Machine Hours Per Unit Blinks 1,048 4 7 Dinks 2,236 5 6 All of the machine hours take place in the Fabrication department, which has an estimated overhead of $82,200. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $102,000. Ramapo Company uses a single plantwide overhead rate to apply all factory overhead costs based on direct labor hours. The factory overhead allocated per unit of Dinks is
Answer:
Ramapo Company
The factory overhead allocated per unit of Dinks is:
= $56.94.
Explanation:
a) Data and Calculations:
Product Number of Units Direct Labor Machine
Hours Per Unit Hours Per Unit
Blinks 1,048 4 7
Dinks 2,236 5 6
Fabrication Assembly
Estimated overhead $82,200 $102,000
Machine hours:
Blinks 7,336
Dinks 13,416
Total machines hours 20,752
Direct Labor hours:
Blinks 4,192
Dinks 11,180
Total machines hours 15,372
Total factory overhead Blinks Dinks
Fabrication department $29,058 $53,142
Assembly department 27,816 74,184
Total allocated overhead $56,874 $127,326
Units produced 1,048 2,236
Factory overhead per unit $54.27 $56.94 ($127,326/2,236)
Define ethics and law and show how they are different and similar.
Answer: The law sets minimum standards of behavior while ethics set maximum standards. Laws are created and enforced by governments based on society's ethics to mediate our relationships with each other and to protect their citizens.
Andrews Corporation has income from operations of $240,000. In addition, it received interest income of $24,000 and received dividend income of $29,500 from another corporation. Finally, it paid $11,800 of interest income to its bondholders and paid $45,000 of dividends to its common stockholders. The firm's federal tax rate is 21%. What is the firm's federal income tax
Answer: $54,820.50
Explanation:
Federal income tax = Taxable income * tax rate
Taxable income = Income from operations + Interest income received + Dividend income received - Interest income paid
= 240,000 + 24,000 + (30% * 29,500) - 11,800
= $261,050
Federal income tax = 261,050 * 21%
= $54,820.50
Note: Only 30% of Dividends received are taxable
Wesley lives in a country with little protection under the law for conducting business or bringing his ideas about a revolutionary new car tire to the market with patent production. Because of the economic conditions what will Wesley most likely do
Answer:
B. Find a country where he can develop his tire idea and have it protected under strong patent laws.
Explanation:
Wesley is looking in a country that offers little protection for the business of bringing newer ideas to market. Due to the poor economic conditions of the nation, Wesley should try and look for another country that can support his ideas and provide him protection.Broker Pat received an offer for a listing along with a $5,000 check from the buyer as an earnest money deposit. When the owner accepts the offer, Pat should handle the check in any of the following ways, except to:____.
a. deposit the check into Pat's brokerage account.
b. give the check to the owner of the property.
c. give the check to the escrow agent.
d. deposit the check in Pat's trust fund account.
Answer:
b. Give the check to the owner of the property.
Explanation:
Pat is a broker who has received an offer for a listing along with check. He can give the check to an escrow agent or deposit the check into pat's brokerage account. he cannot give check directly to the owner of the property.
A firm sells two products, Regular and Ultra. For every unit of Regular sold, two units of Ultra are sold. The firm's total fixed costs are $1,782,000. Selling prices and cost information for both products follow. The contribution margin per composite unit is:
Answer:
Total Contribution = $52
Explanation:
Given:
Fixed cost = $1,782,000
Product Sales price VC per unit
Regular $20 $8
Ultra $24 $4
Computation:
Contribution = Sales - VC
Contribution on regular product = 20 - 8 = $12
Contribution on ultra product = 24 - 4 = $20
Total Contribution = (1 x 12) + (2 x 20)
Total Contribution = 12 + 40
Total Contribution = $52
The following information is available for Lock-Tite Company, which produces special-order security products and uses a job order costing system. April 30 May 31 Inventories Raw materials $ 33,000 $ 32,000 Work in process 9,400 20,800 Finished goods 50,000 34,600 Activities and information for May Raw materials purchases (paid with cash) 171,000 Factory payroll (paid with cash) 250,000 Factory overhead Indirect materials 12,000 Indirect labor 57,500 Other overhead costs 110,000 Sales (received in cash) 1,700,000 Predetermined overhead rate based on direct labor cost 55 % Exercise 19-7 Cost flows in a job order costing system LO P1, P2, P3, P4 Compute the following amounts for the month of May using T-accounts. Cost of direct materials used. Cost of direct labor used. Cost of goods manufactured. Cost of goods sold\.\* Gross profit. Overapplied or underapplied overhead. *Do not consider any underapplied or overapplied overhead.
Answer:
Lock-Tite Company
Cost of direct materials used = $160,000
Cost of direct labor used = $192,500 ($250,000 - $57,500)
Cost of goods manufactured = $446,975
Cost of goods sold = $462,375
* Gross profit = $1,237,625
Overapplied or underapplied overhead = $73,625
*Do not consider any underapplied or overapplied overhead.
Explanation:
a) Data and Calculations:
Inventories April 30 May 31
Raw materials $ 33,000 $ 32,000
Work in process 9,400 20,800
Finished goods 50,000 34,600
Activities and information for May:
Raw materials purchases (paid with cash) 171,000
Factory payroll (paid with cash) 250,000
Factory overhead:
Indirect materials 12,000
Indirect labor 57,500
Other overhead costs 110,000
Sales (received in cash) 1,700,000
Predetermined overhead rate based on direct labor cost 55 %
T-accounts:
Raw materials
Date Account Titles Debit Credit
April 30 Inventory balance $ 33,000
May Cash 171,000
May Factory overhead $12,000
May Work in process 160,000
May 31 Inventory balance $ 32,000
Work in process
Date Account Titles Debit Credit
April 30 Inventory balance $ 9,400
May Raw materials 160,000
Factory payroll 192,500
Factory overhead 105,875
Finished goods $446,975
May 31 Inventory balance $ 20,800
Finished goods
Date Account Titles Debit Credit
April 30 Inventory balance $ 50,000
May Work in process 446,975
May Cost of goods sold $462,375
May 31 Inventory balance $ 34,600
Factory overhead
Date Account Titles Debit Credit
May Raw materials 12,000
Payroll 57,500
Other expenses 110,000
May Work in process $105,875
May Underapplied overhead 73,625
Sales revenue = $1,700,000
Cost of goods sold (462,375)
Gross profit $1,237,625
During December, Far West Services makes a $2,000 credit sale. The state sales tax rate is 6% and the local sales tax rate is 2.5%.
Required:
Record sales and sales tax payable.
Answer:
Total sales tax payable:170, sales :2000
Explanation:
Sale price x sales tax rate = sales tax payable
2000 x .085 (6%+2.5%) = 170
it doesn’t say so I’m assuming that the 2,000 credit sale does NOT include the sales tax due.
During its first year of operations, the McCormick Company incurred the following manufacturing costs: Direct materials, $4 per unit, Direct labor, $2 per unit, Variable overhead, $3 per unit, and Fixed overhead, $160,000. The company produced 20,000 units, and sold 15,000 units, leaving 5,000 units in inventory at year-end. What is the value of ending inventory under absorption costing
Answer: $85,000
Explanation:
Find out the cost of per unit of inventory under absorption costing:
= Direct materials + Direct labor + Variable overhead + Fixed overhead per unit
= 4 + 2 + 3 + 160,000 / 20,000 units
= 4 + 2 + 3 + 8
= $17 per unit
If 5,000 units are left, the value of those units are:
= 5,000 * 17
= $85,000
A firm has inventory of $11,400, accounts payable of $9,800, cash of $750, net fixed assets of $13,125, long-term debt of $9,500, accounts receivable of $6,600, and total equity of $11,700. What is the common-size percentage for the inventory?
Answer:
39.19%
Explanation:
Calculation to determine the common-size percentage for the net fixed assets
Using this formula
Common-size percentage=Net fixed assets /(Inventory+Cash+Net fixed assets+Accounts receivable )
Let plug in the formula
Common-size percentage=$12,150 / ($11,400 + $850 + $12,150 + $6,600)
Common-size percentage= 39.19%
Therefore the common-size percentage for the net fixed assets is 39.19%
