Answer:
b
Explanation:
what is mean mechanical advanteg
Answer:
The ratio of the force produced by a machine to the force applied to it, used in assessing the performance of a machine is called mechanical advantage.
Group 2 elements have two valence electrons. Which kind of bond will they most likely form, and why?(1 point)
A covalent bond is likely because they want to share those two valence electrons in order to become stable.
An ionic bond is likely because they will want to give away two valence electrons in order to become stable.
An ionic bond is likely because they are metals and will want to bond with nonmetals.
A metallic bond is likely because they are metals and can bond with other metals.
Answer:
An ionic bond is likely because they will want to give away two valence electrons in order to become stable.
Considering the octet rule and the definition of ionic bond, the correct option is the second option: "An ionic bond is likely because they will want to give away two valence electrons in order to become stable."
Consider first the octet rule, which states that atoms combine or form ions with the goal of obtaining 8 electrons at their last level. In this way, an electronic configuration similar to that of the closest noble gas in the periodic table is reached. This happens because this configuration, of full electronic level, is very stable from the energy point of view
On the other hand, an ionic bond is a type of chemical bond that occurs when one atom gives up an electron to the other, in order for both to achieve electronic stability.
This union normally occurs between metal and nonmetal elements with different electronegativity, which means that the elements have different capacity to attract electrons. In general, metal elements are willing to donate an electron while nonmetals are willing to receive it.
In summary, an ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions. Usually, the metal gives up its electrons forming a cation to the nonmetal element, which forms an anion.
Finally, the correct option is the second option: "An ionic bond is likely because they will want to give away two valence electrons in order to become stable."
Learn more:
https://brainly.com/question/12064867?referrer=searchResultshttps://brainly.com/question/5277024?referrer=searchResultswhat occurs at the end of a negative cell if an electric cell is placed in a closed circuit?
1. Current means flow of electrons and electrons are negative charged and so are attracted to the positive end of the battery and repelled by the negative end.
2. When battery is connected in a circuit that lets the electron flow through it, they flow from negative to positive.
3. When negative terminal of cell is connected to other negative terminal of the cell in a particular circuit then, current will not flow in circuit as electrons cannot flow from negative to negative terminal.
A glacier advances at 8 x 10-6 cm/s.
How far will it move in 6.6 y?
Answer in units of cm
a radioactive element has a half-life of 30 days. calculate the mass of the element that remains after 20 days if 100g of the element decays. Also, calculate the decay constant.
Explanation:
the answer is in the image above
11 An unstretched spring is 12,0 cm long. A load of 5.0N stretches it to 15.0cm. How long will it be under a load
of 15N? (Assume that the spring obeys Hooke's law.)
Answer: Approximately 22 cm
=========================================================
Explanation:
The unstretched spring is 12.0 cm long. When adding a load of 5.0 N, it stretches to 15.0 cm. This is a displacement of 15.0 - 12.0 = 3.0 cm, which is the amount the spring is stretched.
Convert this displacement to meters (so that it fits with the meters unit buried in Newtons).
3.0 cm = (3.0)/100 = 0.03 m
Apply Hooke's Law to find the spring constant k
F = -kx
5.0 = -k*(0.03)
k = -(5.0)/(0.03)
k = -166.667 approximately
Now we must find the displacement x when F = 15 newtons
F = -kx
-kx = F
x = F/(-k)
x = -F/k
x = -15/(-166.667)
x = 0.089 approximately
x = 0.1
The displacement to one decimal place is about 0.1 meters, which converts to 100*0.1 = 10 cm
So the spring will be stretched to about 12cm+10cm = 22 cm
what are the major parts of the ear?
Explanation:
1.The parts of the ear include:
External or outer ear, consisting of: Pinna or auricle. This is the outside part of the ear. ...
2.Tympanic membrane (eardrum). The tympanic membrane divides the external ear from the middle ear.
3.Middle ear (tympanic cavity) , consisting of: Ossicles. ...
4.Inner ear , consisting of: Cochlea.
Explanation:
The major parts of ear are:-
1) Outer ear
PinnaExternal auditory canalTympanic membrane2) Middle ear
MalleusIncusStapes3) Inner ear
CochleaSemicircular canalsVestibuleIn science, work is defined as:
force multiplied by the distance moved in a direction perpendicular to the force.
force multiplied by the distance moved in a direction parallel to the force.
the mass of an object multiplied by its acceleration.
the mass of an object multiplied by the force required to move it.
Answer:
Yes
Explanation: Thats exactly how it goes
If a diver displace water with a weight of 500N what is the upthrust on the diver?
Answer:
500N
Explanation:
Basically the weight of water displaced is the amount of upthrust. The upthrust is equal to the weight of the water moved by the submerged part of the body and therefore is equal to 500N.
Hope this helps!
Adam is driving his truck at 18 m/s for a distance of 46 m, how much time was Adam driving?
Answer:
2.6 seconds
Explanation:
You have to divide the distance by the velocity to find the time:
46/18 = 2.55 ≈ 2.6 seconds
The answer you are looking for is approximately 2.6 seconds.
Solution/Explanation:
To get the correct answer, you must divide the distance and velocity.
This means that 46÷18=2.5556.
2.5556≈2.6.
So, therefore, the final answer is approximately 2.6 seconds.
I hope that this has helped you. Enjoy your day, and take care.
Can I get some 8th edge help?
Density of Solids Lab Report
3. What methods are you using to test this (or each) hypothesis?
Answer:
The best method to test this with is the buoyancy technique. The buoyancy technique puts force on an object that is equal to the weight of the fluid replaced by the object.
Hope this helps :D
The apparent bending of a wave around the edge of an object is called _____. If a wave passes through a slit that has a width of the same order of magnitude as its _____, it will bend around both edges of the slit to give a semicircular wave.
Answer:
Diffraction and Wavelengyh
define null point
define null point
Answer:
In physics a null is a point in a field where the field quantity is zero as the result of two or more opposing quantities completely cancelling each other
The number of flowers on different breeds of bushes in a greenhouse is recorded every week for two months.
Is there a equation or something so I can do the math of how many flowers there are at the end of the two monthsm
What is concentration gradient?
Answer:
The difference in the concentration of a substance between two areas is called the concentration gradient . The bigger the difference, the steeper the concentration gradient and the faster the molecules of a substance will diffuse. The direction of diffusion is said to be 'down' or 'with' the concentration gradient.
Explanation:
What is the Unit Of Electric current and Who is the Unit named after??
Pls help Asap
Answer:
Amperes
Explanation:
It is named after a French physicist André-Marie Ampère.
HOPE THIS HELPED
The unit of electric current is Ampere, and it is named after the French physicist André-Marie Ampère (1775 - 1836).
Hope it's helpfulI don’t know what to put in the boxes below
Answer:
What boxes are you talking abt?
Please help ???????.......
Answer:
300,000=3×10^3
.000012=1.2×10^-6
Two trucks left the warehouse at the same time and drove in
the same direction along a straight road. One truck drove at 68
km/h while the other drove at 57 km/h. Find theirs distance
apart after2 hours.
Who has the greater velocity, an astronaut who has just completed an orbit of the Earth or you when you have just traveled from home to school? Explain.
Answer:
the answer is
Explanation:
constant acceleration
because when the object's velocity is changing then the object is accelerating or decelerating
as acceleration describe changing of velocity so the answer is constant acceleration
Acceleration is defined as the rate of change of velocity.
Acceleration = (Change in velocity) / time taken
Acceleration = (Final velocity - initial velocity) / time
As the object velocity changes by the same amount in each second, it means the acceleration is constant.
Hope I can help u
Complete the table below. Place an X in the appropriate box to
indicate the type of each measurement unit.
Answer:
Gram per centimeter cubed: Derived Unit
Decimeter: SI Unit
Liter: Derived Unit
Meter Cubed: Derived Unit
Kilogram: SI Unit
Explanation:
Look in Quizlet
What does v or vf stand for? What SI units are used to measure it?
Answer:
Below
Explanation:
In my experience, vf means final velocity, and v would be the average velocity!
You would write it as ΔV (delta V)
The SI units that are used to measure it are m/s
Hope that helped!
v and vf stand for velocity and final velocity respectively. its SI unit is to measure it is m/s.
What is velocity & Acceleration ?Velocity is "rate in change of displacement with respect to time".
i.e. v= dx/dt. It is denoted by v.
it is also defined as displacement divided time. i.e. v= Displacement÷Time.
Velocity shows how much distance can be covered in unit time. It's SI unit m/s.
Acceleration is rate in change of velocity with respect to time.
i.e. a = dv/dt
if an object changes its velocity in short time, we can say that it has greater acceleration.
a= dv/dt =Δv/Δt = [tex]\frac{v_{i} - v_{f} }{t_{i}-t_{f} }[/tex]
where [tex]v_{i}[/tex]= initial velocity of an object
[tex]v_{f}[/tex]= final velocity of an object
t₂= initial time of an object
t₁ = final time of an object
Hence v is stands for velocity and vf is stand for final velocity,
To know more about velocity, click :
https://brainly.com/question/17127206
#SPJ2
7. A train is traveling with an initial velocity of 20.1 m/sec. If the brakes can apply a maximum
acceleration of -0.0500 m/sec”, how long will it take the train to stop?
The time that takes for the train that is traveling with an initial velocity of 20.1 m/s to stop is 402 seconds.
The time that will take for the train to stop can be calculated with the following kinematic equation:
[tex] v_{f} = v_{i} + at [/tex] (1)
Where:
[tex] v_{f}[/tex]: is the final velocity = 0 (when it stops)
[tex] v_{i}[/tex]: is the intial velocity = 20.1 m/s
a: is the acceleration = -0.0500 m/s²
t: is the time =?
By solving equation (1) for t, we have:
[tex] t = \frac{v_{f} - v_{i}}{a} = \frac{0 - 20.1 m/s}{-0.0500 m/s^{2}} = 402 s [/tex]
Therefore, it will take 402 seconds for the train to stop.
To find more about acceleration and velocity go here: https://brainly.com/question/2136991?referrer=searchResults
I hope it helps you!
What do you think the disadvantages of nuclear energy are nabilne fa
Answer:
1 . Environmental impact. Although nuclear power plants release zero carbon emissions, nuclear power still has a substantial impact on the environment, mainly through mining and water discharge. ...
2. Water intensive. ...
3.Risk of nuclear accidents. ...
4.Radioactive waste. ...
5.Non-renewable.
please follow meWhat mass of water in grams will fill a tank 100cm long, 50cm wide, 30cm high?
Answer:
150,000grams
Explanation:
100*50*30=150,000
Also 1ml water= 1 grams
Answer:
150,000³
Process:
You multiply 100cm x 50cm x 30cm. The reason you do this is because the "mass" will be the volume of the tank of water. A "small 2" would represent a two dimensional area, whereas the "small 3" would represent a 3 dimensional area.
a string with fixed ends is made to go into standing wave patterns. at a given tension, the lowest frequency for which a certain pattern exists is 150 Hz. which of the following frequencies would also cause a standing wave pattern in this case?
Answer:
700 hz
Explanation:
A student uses the right-hand rule as shown.
What is the direction of the magnetic field in front of the wire closest to the student?
O up
Oright
O down
O left
Answer: O:right
Explanation: In this case you place your finger on the current, and your fingers should curl showing the way, you must use your right hand in this case, otherwise that would mean the fingers on your left would bend way back, and snap off, (Not really lol, just saying)
The direction of the magnetic field in front of the wire closest to the student is right. Thus, the correct option is B.
The direction of the magnetic field encircling a current-carrying wire can be determined using the right-hand rule. The magnetic field's direction is shown by the direction in which your fingers wrap around the wire if you point your right thumb in the direction of the current.
In this case, the student is using the right-hand rule with their thumb pointing upward. This means that the direction of the current is flowing into the page, perpendicular to the direction of their thumb.
To determine the direction of the magnetic field in front of the wire closest to the student, we can curl our fingers around the wire in the direction of the current (into the page) while keeping our thumb pointing upward. This results in the direction of the magnetic field being to the student's right.
To learn about Fleming's left-hand rule, click: https://brainly.com/question/20347569
#SPJ7
ASAP If the initial pressure of a gas is 100 kPa, initial volume is 1.0 L, and final pressure is 25 kPa, what is the final volume?
When no one answers your question...
The final volume is 4.0 liters.
We can calculate the final volume with Boyle's law:
[tex] P_{i}V_{i} = P_{f}V_{f} [/tex] (1)
Where:
[tex] P_{i}[/tex]: is the initial pressure = 100 kPa
[tex] V_{i}[/tex]: is the initial volume = 1.0 L
[tex]P_{f}[/tex]: is the final pressure = 25 kPa
[tex]V_{f}[/tex]: is the final volume =?
Hence, the final volume is:
[tex] V_{f} = \frac{P_{i}V_{i}}{P_{f}} = \frac{100 kPa*1.0 L}{25 kPa} = 4.0 L [/tex]
Therefore, the final volume is 4.0 liters.
You can learn more about Boyle's law here: https://brainly.com/question/21184611?referrer=searchResults
I hope it helps you!
No links please, links never work, this is science not physics
Which two claims about cats are most likely to be based on science?
A. Cats are the best animals to keep as pets.
B Whiskers help cats sense distances when hunting prey.
C. Cats spend more time sleeping than most other predators.
D. Seeing a black cat is likely to bring you bad luck.
Answer:
b and c are the answers
A is an opinion, D is a superstitious belief because they haven’t found Jesus obviously
Give an example for each of the following, where the force:
a) changes the direction of a moving object.
b) changes the speed of a moving object.
c) changes the shape and size of an object.
d) stops a moving object.
e) moves a stationary object.
Explanation:
A cricket player hitting the ball from opposite direction.A footballer kicking ball with more force.Heating of a plastic bottle.Applying brake of a car.rolling a stopped marble on a table.a). The gravitational forces between the Earth and the Sun bends the Earth's motion along a curving path instead of a straight line.
b). The gravitational forces between the Earth and a falling rock make the rock fall faster and faster.
c). The force of a pressurized stream of hot air makes a balloon get rounder and bigger.
d). The gravitational forces between the Earth and a rock tossed straight up make the rock go slower and slower, and eventually stop. (In the next instant, it starts falling, as described in answer-b.))
e). The acoustic and emotional force of your mother's voice 15 minutes before the school-bus arrives causes you to turn over, sit up, and start putting on your socks.