Explanation:
2C +O2 = 2CO
this will be the answer
If an equilibrium system contains gaseous reactants and/or products, a change in volume will cause a change in concentration and pressure. A decrease in volume will cause the system to shift in the direction that produces _____ moles of gas in total, whereas an increase in volume causes a shift in the direction that produces _____ moles of gas in total.
Answer:
Less
More
Explanation:
When a constraint is imposed on a reaction system in equilibrium, the equilibrium position will shift in such a way as to annul the constraint.
When the volume of a reaction system in equilibrium is decreased, the equilibrium position will shift in the direction having less total number of moles.
Similarly, when the volume is increased, the equilibrium position shifts to the direction having a greater total number of moles.
the chemicals used in the preparation of carbondioxide gas are???
Answer:
Calcium carbonate and hydrochloric acid
Explanation:
The reaction of Calcium carbonate and Hydrochloric acid leads to the formation of Calcium Chloride and Carbon (IV) Oxide gas.
CaCO3 + 2HCl => CaCl2 + CO2 + H2O
What pollutants can contribute to acid precipitation and how are these pollutants generated?
Answer:
I don't know I don't know about question but I can try to find it
Explanation:
I don't know about question but I can try to find it
Select the correct answer.
Which missing item would complete this beta decay reaction?
ОА. 0,-1В
OB. 0,0y
OC. 4,2He
OD. 0,1n
Reset
Answer:
Option A. ⁰₋₁β
Explanation:
Let the unknown be ʸₓA
Thus, the equation given becomes:
⁹⁸₄₃Tc —> ⁹⁸₄₄Ru + ʸₓA
Next, we shall determine the value of x, y and A in order to obtain the answer to the question. This can be obtained as follow:
43 = 44 + x
Collect like terms
43 – 44 =
–1 = x
x = –1
98 = 98 + y
Collect like terms
98 – 98 = y
0 = y
y = 0
ʸₓA => ⁰₋₁A => ⁰₋₁β
Thus, the complete equation is
⁹⁸₄₃Tc —> ⁹⁸₄₄Ru + ⁰₋₁β
The missing item is ⁰₋₁β
CH4 (g) + O2 (g) → CO2 (g) + H2O (g) to. If 28.6 g of CH4 is reacted with 57.6 g of O2, calculate the number of grams of CO2 produced. b. If you actually get 32.1 g of CO2, calculate the percent yield. c. Calculate the number of moles of excess reagent remaining at the end of the reaction.
Answer:
See explanation
Explanation:
First we must obtain the limiting reactant. The equation of the reaction is;
CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (g)
Number of moles of CH4= 28.6 g/16g/mol = 1.8 moles
Since the reaction is 1:1, 1.8 moles of CO2 was produced
Number of moles of O2 = 57.6 g/32 g/mol = 1.8 moles
2 moles of O2 produced 1 mole of CO2
1.8 moles of O2 produced 1.8 × 1/2 = 0.9 moles of CO2
Hence O2 is the limiting reactant
Mass of CO2 produced = 0.9 moles × 44 g/mol = 39.6 g
%yield = 32.1g/39.6 g × 100
%yield = 81.1%
According to the reaction equation;
2moles of O2 reacts with 1 mole of CH4
1.8 moles of O2 reacts with 1.8 × 1/2 =0.9 moles of CH4
Number of moles of CH4 left = 1.8 moles - 0.9 moles
Number of moles of CH4 left = 0.9 moles
Write a Lewis structure that obeys the octet rule for each molecule or ion. Include resonance structures if necessary and assign formal charges to each atom.
Answer:
A structure that obeys the octet rule for each molecule or ion is [tex]XeO_4[/tex]
Explanation:
Here in [tex]XeO_4[/tex] , Xenon has 8 valence electrons and each oxygen atom has 6 valence electrons
Lewis structure for [tex]XeO_4[/tex] is shown below :
Here , all atoms are having their complete octet .
All the atoms in this Lewis structure is having their complete octet .
Resonance structure is not required as all atoms are same that is oxygen .
In an atomic model that includes a nucleus, positive charge is
a
concentrated at multiple sites in an atom.
b
concentrated in the center of an atom.
c
spread evenly throughout an atom.
d
located in the space outside the nucleus.
How are conduction, convection, and radiation different? Conduction transfers thermal energy by . Convection transfers thermal energy by . Radiation transfers thermal energy by .
Answer:
See explanation
Explanation:
There are three modes of heat transfer; conduction, convection and radiation.
Conduction refers to the transfer of heat without the actual movement of the particles of matter.
Convection is the transfer of heat by the actual movement of the particles of matter.
Radiation is the transfer of heat without a material medium.
Hence the three modes of heat transfer differ in the actual mechanism by which heat energy is transferred as shown above.
Answer:
The movement of molicules
The movement of a fluid
Electromagnetic Waves
Explanation:
Trust me
Help me :( plzzzz :(
Answer: 1.80
Explanation:
¿A qué se llama Recursos químicos en Química Industrial? ¿Cómo logran convertirse en bienes de consumo para la sociedad?
La respuesta correcta para esta pregunta abierta es la siguiente.
Desafortunadamente, no anexas opciones o incisos para contestar la pregunta.
Sin embargo, podemos comentar lo siguiente.
¿A qué se llama Recursos químicos en Química Industrial? ¿Cómo logran convertirse en bienes de consumo para la sociedad?
Hablando de Química Industrial, los recursos químicos son todos aquellos recursos que se utilizan para la extracción, procesamiento, y fabricación de los recursos naturales y materias primas para la elaboración de productos que posteriormente serán utilizados por otras industrias para ofrecerlas y venderlas como productos para el consumo masivo de las personas.
Este procesamiento de substancias para transformarlas en productos de consumo en general va encaminado a beneficiar a diferentes sectores como la medicina, los endulzantes, los fertilizantes, los saborizantes, los insecticidas, los plaguicidas, colorantes, y todo tipo de sustancia que pueda ser industrializada para su consumo final.
(Please help)
1.what is the most common isotope for element x
2.calculate the average atomic mass for element x
Answer:
1. Isotope with mass number 39.
2. 39.02g/mol
Explanation:
1. The most common isotope is the isotope in the higher proportion, that is:
Isotope with mass number 39.
2. The average atomic mass is the sum of the masses times their abundance. For the element X:
Average atomic mass:
38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031
= 39.02g/mol
Why are most plants green out of all the colors?
Answer: Different forms of chlorophyll
Explanation:
Depending on the significance the of the chlorophyll it’s function is to absorb light, which excites electrons in the chlorophyll.
Answer:
Plant cells have an organelle called chloroplast in them. Chloroplast contains a green pigment called chlorophyll which gives plants it's green color.
Chlorophyll is important in plants as it helps the plant in producing food with the process of photosynthesis.
Cuál es el cruce para un niño donde su padre tiene el pelo rizo RR y su madre pelo lacio rr
Answer:
Rr
Explanation:
air is made up of different gasses such as oxygen nitrogen and carbon dioxide. which statement best describes these three components of air?
-they are all classified as pure substances
-they cannot react with another substance
-they are chemically bonded to one another
-they can be classified as elements
Answer:
They are chemically bonded to one another
Answer:
they can be classified as elements
How can I balance chemical equations by providing the correct coefficients? For example: [?]Pb(NO3)2 + [?]NaCrO4 = [?]PbCrO4 + [?]NaNO3
Answer:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃
The coefficients are: 1, 1, 1, 2
Explanation:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃
The above equation can be balance as follow:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃
There are 2 atoms of Na on the left side and 1 atom on the right side. It can be balance by writing 2 before NaNO₃ as shown below:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃
Now the equation is balanced.
The coefficients are: 1, 1, 1, 2
Calculate the average atomic mass for element X.
(Please HELP)
What is a substance that decreases the rate of a chemical reaction called? (5 points)
What is a substance that decreases the rate of a chemical reaction called? (5 points)
Catalyst
Inhibitor
Product
Reactant
Answer:
inhibitor :)
Explanation:
Catalysts speed the reaction up, and the other 2 are essential for the reaction to work, so an inhibitor :)
Answer:
Inhibitor
Explanation:
In a few sentences, describe the molecular polarity and the intermolecular forces present in ammonium lauryl sulfate.
The description of the molecular polarity and the intermolecular forces present in ammonium lauryl sulfate should be explained below.
What is ammonium lauryl sulfate?The common name of it should be likely ammonium lauryl sulfate (ALS) and its molecular formula should be (CH3(CH2)10CH2OSO3NH4).
Also, one intermolecular formula that should be presented in the molecule should be considered as the electrostatic forces of attraction that lies between the non-polar chain and the polar ending group.
Learn more about forces here: https://brainly.com/question/23196146
Which of these is an example of a chemical change?
Answer:
D. Burning a peice of wood
Explanation:
Because when you burn wood a chemical reaction happenes between the flames and the wood making the wood into ashes.
Hope this helps you :)
The dissolving salt in water is an an example of a chemical change. The correct option is A.
A chemical change, also known as a chemical reaction, is the production of new substances with changing chemical compositions and characteristics.
In water, sodium chloride dissociates into Na+ ions and Cl- ions, which may be described as a chemical process.
The ionic connections between the atoms are broken as salt dissolves. Because the reactant (sodium chloride or NaCl) varies from the products (sodium and chloride ions), a chemical reaction takes place.
Thus, the correct option is A.
For more details regarding chemical change, visit:
https://brainly.com/question/23693316
#SPJ6
Metals like potassium and sodium are kept in paroffin oil. Why?
Answer:
because they are high reactive to the air thats why we keep them in paroffin oil
EN LA MINA DE CHUQUICATAMA SE EXPLOTA DIFERENTES METALES COMO SER EL COBRE , AL ESTAR EN CONTACTO CON EL AIRE DICHO METAL SE LLEGA A OXIDAR FORMANDO DOS CLASES DE OXIDO¿CUALES SON ESTOS DOS OXIDOS?
Answer:
Los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).
Explanation:
El cobre posee dos estados de oxidación más comunes, los cuales son +1 y +2.
En contacto con aire el cobre se puede oxidar para dar lugar al óxido cuproso u óxido de cobre (I):
4Cu + O₂ → 2Cu₂O
Dicha oxidación también puede dar lugar a la formación del óxido cúprico u óxido de cobre (II):
2Cu + O₂ → 2CuO
La formación del óxido cúprico se favorece a temperaturas mayores a la del ambiente (por encima de los 300 °C).
Por lo tanto, los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).
Espero que te sea de utlidad!
If a reaction occurs, what will be the products of the unbalanced reaction below?
Cu(s) + Ni(NO3)2(aq)
The Activity Series of Elements
A.
CuNi(NO3)4(s)
B.
Ni(s) + Cu(NO3)2(aq)
C.
No reaction will occur.
D.
CuNi(s) + NO2(g)
Cu(s) + Ni(NO3)2(aq) ⇒Ni(s) + Cu(NO3)2(aq)
The answer is option B.
What is electrochemical series?
Electrochemical or hobby series when the electrodes (metals and non-metals) in touch with their ions are organized on the idea of the values of their preferred discount potentials or standard oxidation potentials, the resulting series is called the electrochemical.
The electrochemical series is built up by means of arranging various redox equilibria so as of their fashionable electrode potentials (redox potentials). The maximum poor E° values are placed at the pinnacle of the electrochemical series, and the maximum wonderful at the lowest.
Learn more about chemical equation here:-https://brainly.com/question/11231920
#SPJ2
cuantos gramos y moleculas de dioxido de carbono hay en 0.5 moles de dioxido de carbono
paso a paso
Answer:
metro= 22g
Explanation:
What is a polyatomic compound?
What is a polyatomic compound?
➡A polyatomic ion is an ion that contains more than one atom. This differentiates polyatomic ions from monatomic ions, which contain only one atom.
#CarryOnLearningIf a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then what happens to the temperature of the gas?
Answer: If a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.
Explanation:
Charles law states that at constant pressure, the volume of a gas is directly proportional to the temperature.
That is, [tex]V \propto T[/tex].
So, when a gas is pumped from a smaller container to a container that is twice the size shows that volume is increasing by 2 times and its pressure is kept the same.
Therefore,
[tex]2V \propto 2T[/tex]
This means that the temperature of the gas will also become twice its initial temperature.
Thus, we can conclude that if a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.
How many atoms are there in 1 g of argon?
The Avogadro constant is 6.02 × 1023 per mole.
Relative atomic mass (Ar): Ar = 40
Answer:
1.5057×10^22 atom
Explanation:
As we
1 mole of argon = 40 g of argon
i.e 40 g of argon = 1 mole of argon
1 g of argon = 1/40 mole of argon
1 mole of argon = 6.023×10^23 atom of argon
1/40 mole if argon = 1/40 ×6.023×10^23
= 1.5057×10^22
The number of atoms of Argon in 1 g would be 1.51 × 10²²
To find out the number of atoms of Argon in 1 g of Argon, the number of moles has to be calculated from which the number of atoms can be derived.
The molecular mass of Argon is 40. The number of moles of Argon is calculated as:
Number of moles of Argon = [tex]\frac{Mass of Argon in grams}{Molecular mass of Argon}[/tex]
Substituting molecular mass as 40 and mass in grams as 1. we get:
Number of moles of Argon = [tex]\frac{1}{40}[/tex] = 0.025 mol
Number of atoms in 1 mole of any substance is given by Avogadro's number as 6.022 × 10²³.
Thus, number of atoms of Argon in 0.025 moles would be
= 0.025 × 6.022 × 10²³
= 0.151 × 10²³ or 1.51 × 10²²
Learn more about Avogadro's number in:
https://brainly.com/question/16348863
#SPJ2
What is the molarity of the solution formed by dissolving 80. G of NAOH(s) into water to give a total volume of 4.00 l
Answer:
0.5 M
Explanation:
From the question given above, the following data were obtained:
Mass of NaOH = 80 g
Volume of solution = 4 L
Molarity =?
Next, we shall determine the number of mole in 80 g of NaOH. This can be obtained as follow:
Mass of NaOH = 80 g
Molar mass of NaOH = 23 + 16 + 1
= 40 g/mol
Mole of NaOH =?
Mole = mass / molar mass
Mole of NaOH = 80 / 40
Mole of NaOH = 2 moles
Finally, we shall determine the molarity of the solution. This can be obtained as follow:
Mole of NaOH = 2 moles
Volume of solution = 4 L
Molarity =?
Molarity = mole / Volume
Molarity = 2/4
Molarity = 0.5 M
Therefore, the molarity of the solution is 0.5 M.
What mass of barium sulfate (233 g/mol) is produced when 125 mL of a 0.150 M solution of barium chloride is mixed with 125 mL of a 0.150 M solution of iron(III) sulfate
Answer:
4.37 g of barium sulphate
Explanation:
The reaction equation is;
3BaCl2(aq) + Fe2(SO4)3(aq) ---->3 BaSO4(s) + 2FeCl3(aq)
From the question, the number of moles of both barium chloride and FeSO4 = 125/1000 L × 0.150 M = 0.01875 moles
To find the limiting reactant;
3 moles of barium chloride yields 3 moles of barium sulphate
0.01875 moles of barium chloride yields 3 × 0.01875 moles/3 = 0.01875 moles of barium sulphate
1 mole of iron III sulphate yields 3 moles of barium sulphate
0.01875 molesof iron III sulphate yields 0.01875 moles ×3/1 = 0.05625 moles of barium sulphate
Hence,barium chloride is the limiting reactant
Amount of barium sulphate produced = 0.01875 moles × 233 g/mol = 4.37 g of barium sulphate
A student distills a sample of ink. Devise a simple method to show that the liquid collected is pure water. Include the expected results in your answer.
Answer:
Distillation
Explanation:
Water vaporizes at lower temperature than the ink pigment so if you heat them, the water evaporates, leaving the ink pigment in the flask
which of the following is saturated hydrocarbon?
1 alkyne
2 alkane
3 ethylene
4 alkene
Answer:
2 alkane
Explanation:
Because it has a single bond therefore it is saturated
