Answer:
The larger fish population explodes at first, and the smaller fish population begins to drop. Eventually, the river runs out of smaller fish so larger fish die out, and the plant population grows.
Explanation:
Mechanical digestion begins in the_____ and involves physical processes, such as chewing.
Answer:
begins in the mouth
How many grams are there in 1.8055 x 10^25 molecules of sodium sulfate? Hint: Convert to moles first
Answer:
4258.82 g of Na₂SO₄
Explanation:
From the question given above, the following data were obtained;
Number of molecules of Na₂SO₄ = 1.8055x10²⁵ molecules.
Number of mole of Na₂SO₄ =?
From Avogadro's hypothesis,
6.02×10²³ molecules = 1 mole
Therefore,
6.02×10²³ molecules = 1 mole of Na₂SO₄
Next, we shall determine the mass of 1 mole of Na₂SO₄. This can be obtained as follow:
1 mole of Na₂SO₄ = (23×2) + 32 + (16×4)
= 46 + 32 + 64
= 142 g
Thus,
6.02×10²³ molecules = 142 g of Na₂SO₄
Finally, we shall determine the mass of Na₂SO₄ that contains 1.8055x10²⁵ molecules. This can be obtained as follow:
6.02×10²³ molecules = 142 g of Na₂SO₄
Therefore,
1.8055x10²⁵ molecules
= (1.8055x10²⁵ × 142) / 6.02×10²³
= 4258.82 g of Na₂SO₄
Thus, 4258.82 g of Na₂SO₄ contains 1.8055x10²⁵ molecules
During energy conversions, some energy is always lost as _____.
heat
electricity
chemical energy
light
Answer:
electricity
Explanation:
I know this because I am currently learning about this and remember doing it
how many moles of an NH3 can be produced from 2.82 moles of nitrogen in the following reaction:
Write the balanced equation for the equilibrium reaction for the dissociation ofsilver chloride in water, and write the K expression for this reaction. Then create an ICE chart. Since we know the equilibrium concentration of the silver ion, we can solve for Ksp.Does it agree with the literature value
Answer:
See explanation
Explanation:
Hello there!
In this case, since the the concentrations are not given, and not even the Ksp, we can solve this problem by setting up the chemical equation, the equilibrium constant expression and the ICE table only:
[tex]AgCl(s)\rightleftharpoons Ag^+(aq)+Cl^-(aq)[/tex]
Next, the equilibrium expression according to the produced aqueous species as the solid silver chloride is not involved in there:
[tex]Ksp=[Ag^+][Cl^-][/tex]
And therefore, the ICE table, in which x stands for the molar solubility of the silver chloride:
[tex]\ \ \ \ \ \ \ \ \ \ \ \ \ \ AgCl(s)\rightleftharpoons Ag^+(aq)+Cl^-(aq)[/tex]
I - 0 0
C - +x +x
E - x x
Which leads to the following modified equilibrium expression:
[tex]Ksp=x^2[/tex]
Unfortunately, values were not given, and they cannot be arbitrarily assigned or assumed.
Regards!
which solution has a higher percent ionization of the acid , a .10 M solution of HC2H3O2 (aw) or a .010 M solution of HC2H3O2(aq)
Answer:
0.0010 M of HC2H302(aq)
Genes influence an organism's traits by coding for:
A
Cells
Answer:
First, the protein may be a structural protein, contributing to the physical properties of cells or organisms. ... Second, the protein may be an enzyme that catalyzes one of the chemical reactions of the cell. Therefore, by coding for proteins, genes determine two important facets of biological structure and function.
Explanation:
i think it will help you
Which is the function of the organ shown below
Answer:
c the pancreas produce enzyme that breakdown carbohydrate protein and fat
What is true of an earthquake that causes major damage to buildings in an area?
It has a high magnitude.
It has a high frequency.
It has a low frequency.
It has a low magnitude.
The correct option is :
=》It has a high magnitude.
the damage caused by an earthquake is proportional to its magnitude, as much the magnitude is, that much damage will be caused by it.
The term used to indicate and earthquake that causes major damage to buildings in an area is called a high magnitude earthquake. Hence, option a is correct.
What is high magnitude earthquake?The most typical way to gauge an earthquake's size is by its magnitude. No matter where you are or how violent the shaking is, it is the same number since it represents the size of the earthquake's source.
The USGS no longer uses the outmoded Richter scale to determine the magnitude of major, teleseismic earthquakes. Several magnitude scales measure various aspects of the earthquake, but the Richter scale measures the biggest wobble (amplitude) on the recording.
Currently, the USGS uses the Moment Magnitude scale to report earthquake magnitudes, however many different magnitudes can be calculated for comparison and research. Therefore, option a is correct.
Find more on earthquakes:
https://brainly.com/question/29500066
#SPJ3
Which of the following is an advantage of asexual reproduction compared to sexual reproduction?
Both will produce genetically identical offspring from the parent.
Sexual reproduction will increase genetic variability within a species.
Asexual reproduction requires less energy and will produce more offspring over time.
Sexual reproduction has minimal changes of mutations compared to asexual reproduction.
Explanation:
sexual reproduction has minimal changes of mutations compared to asexual reproduction
Answer:
sexual reproduction has minimal changes of mutations compared to asexual reproduction
I hope this helps
A reaction occurs in which carbon combines with sulfur to form carbon
disulfide. Is this a chemical reaction or a nuclear reaction, and how do you
know?
A. This is a nuclear reaction, because mass was conserved.
B. This is a chemical reaction, because only the electrons were
rearranged.
C. This is a nuclear reaction, because there was a change in the
atoms' nuclei.
D. This is a chemical reaction, because mass was not conserved.
The reaction in which carbon combines with sulfur to form carbon
disulfide. Is
B. This is a chemical reaction, because only the electrons were rearranged.What is a chemical reaction?In a chemical reaction, bonds between molecules of the reactant are broken and new bonds between molecules of the product are established to create a new substance.
Chemical reactions occur all around us, including in our body's digestion of food and the creation of the sunlight's light. Understanding physical and chemical changes is crucial before starting any chemical reactions.
Sulfur and carbon combine to form carbon disulfide in an endothermic reaction that absorbs 92 kJ/mol of heat.
Learn more about carbon disulphide at:
https://brainly.com/question/16157463
#SPJ1
Please help me on 6 and 8 thanks
Answer:
6.) 3, 12, 1, and 4 8.) 4, 1, and 3
Explanation:
By multiplying subscripts inside and outside of the parentheses you can count the number of atoms that are present. I recently answered a question for you and I did the math wrong I am going to go back and comment so you know which one and I will correct my errors. Sorry for the inconvenience!
the number of atoms in number 6:
N: 3
H: 12
P: 1
O: 4
the number of atoms for number 8:
Ca: 4
C: 1
O: 3
hope I clarified my mistake and helped you! :)
A 25.0 mL NaOH solution of unknown concentration was titrated with a 0.189 M HCl solution. 19.6 mL HCl was required to reach the equivalence point. In a separate titration, a 10.0 mL H3PO4 solution was titrated with the same NaOH solution. This time, 34.9 mL NaOH was required to reach the equivalence point. What is the concentration of the H3PO4 solution
Answer:
0.172 M
Explanation:
The reaction for the first titration is:
HCl + NaOH → NaCl + H₂OFirst we calculate how many HCl moles reacted, using the given concentration and volume:
19.6 mL * 0.189 M = 3.704 mmol HClAs one HCl mol reacts with one NaOH mol, there are 3.704 NaOH mmoles in 25.0 mL of solution. With that in mind we determine the NaOH solution concentration:
3.704 mmol / 25.0 mL = 0.148 MAs for the second titration:
H₃PO₄ + 3NaOH → Na₃PO₄ + 3H₂OWe determine how many NaOH moles reacted:
34.9 mL * 0.148 M = 5.165 mmol NaOHThen we convert NaOH moles into H₃PO₄ moles, using the stoichiometric coefficients:
5.165 mmol NaOH * [tex]\frac{1mmolH_3PO_4}{3mmolNaOH}[/tex] = 1.722 mmol H₃PO₄Finally we determine the H₃PO₄ solution concentration:
1.722 mmol / 10.0 mL = 0.172 MIn both industry and research there are often times when one particular component of a mixture needs to be separated from a solution. Maybe it is a rare metal that is dissolved in a mixture of minerals. Maybe it is a particular protein from lysed plant cells. If the desired component is volatile, distillation could be used. But if the goal is to separate ions in solution, fractional precipitation is preferred.
a. True
b. False
Answer:
a. True
Explanation:
Distillation process is a process that is used to separate the components or the substances from the liquid mixtures by using selectively boiling and condensation.
While fractional precipitation is a process which separates the ions from solution based on the different solubilities.
Therefore, the answer is true.
The Swedish chemist Karl Wilhellm was the first to produce chlorine in the lab
2NaCl + 2H2SO4 + MnO2 -----> Na2SO4 + MnSO4 + H2O + Cl2
If Dr. Wilhellm started with 50.0 g of each reactant, which reactant is the limiting reactant?
Answer:
Explanation:
Remark
Interesting que8stion. You have to figure out how many mols are present in each reactant. Since all periodic tables are different, I'm going to use rounded numbers. If it is too close, I will go further.
NaCl
Na = 23
Cl = 35.5
1 mol = 58.5 grams
given = 50.0 grams
Mols for the reaction = 50/58.5 = 0.855
H2SO4
H2 = 2*1 2
S = 1 * 32 32
O4 = 4*16 64
1 mol = 98 grams
mols present = 50/98 = 0.510
MnO2
Mn = 1 * 55 = 55
O2 = 2*16 = 32
1 mol = 87 grams
mols available = 50/87 = 0.5747
Discussion
Na Cl and H2SO4 both require 2 moles for every mol of Cl2 produces.
H2SO4 has 0.51 mols available for a reaction
NaCl has 0.855 moles available for a reaction
MnO2 has 0.575 moles available for a reaction.
Given those numbers 0.510 mols of H2SO4 will only produce 0.255 mols of chlorine and the rest will be reduced in a similar manner. H2SO4 is the limiting reagent (reactant).
In other words only 0.510 moles of NaCl will be used and 0.855 - 0.510 moles will be left over on the reactants side.
only 0.575 moles of MnO2 will be used and 0.065 moles will be left over.
The oddity in the result shows up because the balance numbers in the equation give a ratio of 2 to 1 for H2SO4 and NaCl The 2 belongs to the reactants and the 1 for the chlorine.
The more energy that particles have, the ___ they move.
The more energy that particles have, the more they move.
t-Butyl alcohol was produced by the liquid-phase hydration (using water, W) of isobutene (I) over an Amberlyst-15 catalyst.
a. True
b. False
Answer:
True
Explanation:
This is because, The hydroboration oxidation of an alkene which is isobutene in the presence of a catalyst will result to alcohol as the product . Therefore, the OH group will attach or link itself to the carbon which is less obstructed. Thus this reaction is in accordance to Anti-Markownikoff's rule.
So isobutene on hydroboration oxidation will produce ter isobutyl alcohol.
If a substance has a density of 0.123 g/mL, 10.0 dL would weigh in g?
Answer:
123 g
Explanation:
First, we convert 10.0 dL into mL, keeping in mind that:
1 dL = 100 mL; then10.0 dL * 100 = 1000 mLNow we can multiply the density by the volume in order to calculate the mass:
Density = mass / volumeDensity * volume = mass0.123 g/mL * 1000 mL = 123 g10.0 dL of a substance with a density of 0.123 g/mL would weigh 123 grams.
But Are Punnett square percentages always correct?
Answer:
yes
Explanation:
cuz is a square and if all angles are equal of a square then it is correct
is scandium a transition metal?
Answer:no
Explanation:
Answer:
Scandium is a transition metal
Explanation:
1) Heat is the ______ of energy and a unit is ____.
A: Measure; Joule
B: Measure; Kelvin
C: Movement; Kelvin
D: Movement; Joule
2) ______ is the internal energy of particles and when this motion is measured, the unit used is ___.
A: Heat; Joule
B: Thermal Energy; Kelvin
C: Thermal Energy; Joule
D: Heat; Kelvin
Answer:
Q1) B
Q2) C
Kelvin is the SI unit of temperature.
Which of the following regions has an economy based on processing food and consumer goods?
A. Western Europe
B. Eastern Europe
C. northern Europe
D. southern Europe
No links plz
Answer:
B. Eastern Europe
Explanation:
The economy of Eastern Europe depends on producing foods. For example, Poland and Belarus are two countries in Eastern Europe, and they both produce chocolates. Producing foods isn't the only detrimental part of the region's economic data. The other half depends on consumer goods. For example, Estonia and Latvia are good countries in packaging food. The answer to the question is B.
What happens to the entropy when a solution is made?
A. The entropy increases.
B. The entropy decreases.
C. The entropy goes to zero.
D. The entropy is unaffected.
Answer:
The entropy increases
Explanation:
Just took the quiz
2 Which of the gases in air are elements? Explain how you can tell.
Answer:
I'll explain.
Explanation:
The molecules of two different elements, nitrogen and oxygen, make up about 99 percent of the air. The rest includes small amounts of argon and carbon dioxide. Oxygen is the life-giving element in the air. You can tell because they're on the periodic table which is a table for elements.
Explanation:
nitrogen and oxygen are the gases in the air which are elements you can simply say it by looking the periodic table
If 1.00 g of KCl is completely dissolved in 24.5 g of water, what is the percent composition (by mass) of the solution that is formed?
Answer:
3.92%
Explanation:
The solution that is formed is of KCl in water. This means that the percent composition by mass is given by the formula:
Mass of KCl / Mass of Solution * 100%We now calculate the mass of solution:
Mass of Solution = Mass of KCl + Mass of Water = 1.00 g + 24.5 gMass of Solution = 25.5 gFinally we calculate the percent composition:
1.00 g / 25.5 g * 100% = 3.92%Which of the following is a characteristic shared by all living things?
A. They have tissues and organs,
B. They take in oxygen.
C. They make more individuals of the same kind.
D. They move.
how real gases differ from ideal gases?
An ideal gas is one that follows the gas laws at all conditions of temperature and pressure. To do so, the gas would need to completely abide by the kinetic-molecular theory. On the other hand, a real gas is a gas that does not behave according to the assumptions of the kinetic-molecular theory.
Furthermore, the particles of an ideal gas are extremely small and have a mass equivalent to practically zero. Ideal gas particles also have no volume.
An example of a real gas is helium, oxygen, and nitrogen.
Carbon-11 decays by position emission.The nuclide formed product is
Answer:
They demonstrated that carbon-11 decays by positron emission to the stable nuclide 11B [Eq. (1)].
What is the volume, in liters, of 0.350 mol of nitrogen gas at 32°C and
0.980 atm of pressure? *
A. 9.85 L
B. 8.94 L
C. 104.6 L
D. 0.94 L
Answer: The volume is 8.94 L.
Explanation:
Given: no. of moles = 0.350 mol, Pressure = 0.980 atm
Temperature = [tex]32^{o}C = (32 + 273) K = 305 K[/tex]
Formula used to calculate the volume is as follows.
PV = nRT
where,
P = pressure
V = volume
n = number of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\0.980 atm \times V = 0.350 mol \times 0.0821 L atm/mol K \times 305 K\\V = 8.94 L[/tex]
Thus, we can conclude that the volume is 8.94 L.
Please answer I will give you brainliest!!
Answer:
Warm front
Explanation:
A warm front forms when a warm air mass pushes into a cooler air mass, shown in the image to the right (A). Warm fronts often bring stormy weather as the warm air mass at the surface rises above the cool air mass, making clouds and storms. Warm fronts move more slowly than cold fronts because it is more difficult for the warm air to push the cold, dense air across the Earth's surface. Warm fronts often form on the east side of low-pressure systems where warmer air from the south is pushed north.
You will often see high clouds like cirrus, cirrostratus, and middle clouds like altostratus ahead of a warm front. These clouds form in the warm air that is high above the cool air. As the front passes over an area, the clouds become lower, and rain is likely. There can be thunderstorms around the warm front if the air is unstable.
On weather maps, the surface location of a warm front is represented by a solid red line with red, filled-in semicircles along it, like in the map on the right (B). The semicircles indicate the direction that the front is moving. They are on the side of the line where the front is moving. Notice on the map that temperatures at ground level are cooler in front of the front than behind it.
