A box has a mass of 4kg and surface area 4m². Calculate the
pressure exerted by the box on the floor.
​

Answer:

2r or diameter

Explanation:

After 3 1/2 rounds it will end up on the other side of the circle and displacement will be 2 x the radius = d

Distance = 7 π R

Displacement = 2 R from the starting point directed through the center of the circle

Answer:

It is practiced around the world .

The statement, that is, food irradiation leaves food mildly radioactive is not true.  

• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.  

• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.  

• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.  

• Food irradiation has been approved in over forty countries and is almost practiced globally.  

Thus, the statement, that is, it leaves food mildly radioactive is incorrect.  

To know more about:

https://brainly.com/question/19586033

Answer:

Determine the direction that the pilot is aiming the plane.

Explanation:

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

Answer:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Explanation:

A continuación, veremos que representa cada caso:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Explanation:

A diode is an electrical element which offers the flow of current freely in one direction with very less resistance.

The given figure depicts a diode in forward bias, where the p-side and the n-side of the diode are connected to positive and negative terminals respectively. In such a case the current flows from the p-side to n-side of the p-n junction very easily and the value of the current increases rapidly after a certain voltage, this voltage is called threshold voltage.

We can deduce from the graph that the resistance of the diode reduces with increase in voltage. As resistance is given by the formula:

[tex]R=\frac{V}{i}[/tex]

Answer:

The time in which the pendulum does a complete revolution is called the period of the pendulum.

Remember that the period of a pendulum is written as:

T = 2*pi*√(L/g)

where:

L = length of the pendulum

pi = 3.14

g = 9.8 m/s^2

Here we know that  L = 14.4m

Then the period of the pendulum will be:

T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s

So one complete oscillation takes 7.61 seconds.

We know that the pendulum starts moving at 8:00 am

We want to know 12:00 noon, which is four hours after the pendulum starts moving.

So, we want to know how many complete oscillations happen in a timelapse of 4 hours.

Each oscillation takes 7.61 seconds.

The total number of oscillations will be the quotient between the total time (4 hours) and the period.

First we need to write both of these in the same units, we know that 1 hour = 3600 seconds

then:

4 hours = 4*(3600 seconds) = 14,400 s

The total number of oscillations in that time frame is:

N = 14,400s/7.61s = 1,892.25

Rounding to the next whole number, we have:

N = 1,892

The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.

Answer:

shushhhgggvvv vgfxgh

Explanation:

gey laahhg

the correct answer is ---- 122

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=T.dA[/tex]

Therefore

 [tex]T=\frac{W}{dr}[/tex]

 [tex]T=\frac{1.5*10^{-4}}{2}[/tex]

 [tex]T=7.5*10^{-5}[/tex]

Answer:

The action of measuring the size, length, or amount of something, as established is called measurement.

Explanation:

“Measurement” is the act of determining a target's size, length, weight, capacity, or other aspect. ... To use measurement tools as necessary. It is also appropriate to say that measurement is done by a worker using a measurement system, and instrumentation is done by a technician.

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases

Answer:

the force of resistance on the right team is 360 N

Explanation:

Given;

force of the left team, = 1000 N

total mass of the right team, m = 300 kg

acceleration of the right team, a = 1.2 m/s²

The force of resistance of the right team is calculated as;

Force = mass x acceleration

Force, F = 300 x 1.2

Force = 360 N

Therefore, the force of resistance on the right team is 360 N

Answer:

The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.

Answer:

[tex]a=0.33\ m/s^2[/tex]

Explanation:

For washer 2,

v₁ = 0.13 m/s

v₂ = 0.36 m/s

t₁ = 1.92

t₂ = 2.61

We need to find the acceleration of waster 2.

[tex]a=\dfrac{v_2-v_1}{t_2-t_1}\\\\a=\dfrac{0.36-0.13}{2.61-1.92}\\\\a=\dfrac{0.23}{0.69}\\\\a=0.33\ m/s^2[/tex]

So, the acceleration of washer 2 is [tex]0.33\ m/s^2[/tex].

Answer:

.33

Explanation:

Answer:

1.the friction of air, gravity2.gravity

Answer:

The softball experiences an applied force as a result of Amy’s throw. As the ball moves, it experiences drag from the air it passes through. It also experiences a downward pull because of gravity.

Explanation:

Plato

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

Answer:

[tex]Q=50.3[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=330Hz[/tex]

Sound intensity drop [tex]I_d=2[/tex]

Time [tex]T=4s[/tex]

Therefore

Sound intensity Ratio

 [tex]\frac{I}{I_x}=\frac{1}{2}[/tex]

Generally the equation for Sound intensity is mathematically given by

 [tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]

 [tex]\frac{1}{2}=e^{-4\ \=t}[/tex]

 [tex]\=t =5.8s[/tex]

Generally the equation for Quality Factor is mathematically given by

 [tex]Q=2 \pi\frac{E}{\triangle E}[/tex]

 [tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]

 [tex]Q=50.3[/tex]

Answer:

I think it's D

Explanation:

because I have seen the tracks of the tires

Answer:

6. a. friction between a tire and the road

7. c. energy of motion

8. c. the force with which a moving vehicle hits another object

Explanation:

6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.

So, the answer is a

7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.

So, the answer is c

8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.

So, the answer is c.

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

Answer:

The magnetic force acting on the proton is 1.68 x 10^-18 N.

Explanation:

magnetic field, B = 5 T

speed , v = 2.1 m/s

charge q = 1.6 x 10^-19 C

Angle, A = 90 degree

The magnetic force on the charge particle is given by

[tex]F = q v B sin A\\\\F = 1.6\times 10^{-19}\times 2.1\times 5\times sin 90\\\\F = 1.68\times 10^{-18} N[/tex]

Answer:

Air.

Explanation:

To know which option is correct, let us consider the relationship between velocity and the wavelength of a wave. This is illustrated below:

Velocity, wavelength and frequency are related by the following equation:

Velocity = wavelength × frequency

v = λf

From the equation above, we can see clearly that the velocity is directly proportional to the wavelength.

This means that an increase in the wavelength will lead to an increase in the velocity and also, a decrease in the wavelength will lead to a decrease in the velocity.

Now, considering the table given in the question above, we can see that the wave has a higher speed in air. This simply means that the wave will also have a higher wavelength in air.

Thus, the correct answer to the question is: air

Answer:

the acceleration of the elevator is increasing

Explanation:

For this exercise we propose the solution using Newton's second law

         F -W = m a

         F = m (g + a)

If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

Answer:

The answer is "thumb-up".

Explanation:

The sling often called the arm sling, is a solution for preventing either shoulder or elbow motion during healing. A triangle bandage could be constructed.

A sling is a strong tissue loop that descends from the head to hold the forearm. The armrests in the sling bent also at the elbow.

The injured hand of the forearm should be positioned inside the pin position in the joint above the level of the elbow when putting the forearm sling.