please helpppppppppp
Answer:
Environmental factors such as diet, temperature, oxygen levels, humidity, light cycles
And the presence of mutagens can all impact which of an animal's genes are expressed, which ultimately affects the animal's phenotype.
Equilibrium occurs in what type of reactions?
A. Catalytic
B. Irreversible
C. Reversible
D. Combustion
Answer:
B. Irreversible
Explanation:
Answer: C Reversible
Explanation:
Founder's Education Quiz
Is burning physical or chemical change?
Answer:
a chemical change
Explanation:
lighting a match is a chemical change. chemical reactions cause chemical change. in a chemical reaction two or more substances, called the reactants, form different substances called products. hope this helped :)
What is a molecule contains the genetic instructions for the development and functioning of all living organisms found in the nucleus of a cell
Prokaryotic is an example of a/an-
A:tissue
B:cell type
C:organ
D:organism
Answer:
B. Cell Type
Explanation:
that is the answer i believe
Answer:
option b- cell type
Explanation:
almost absolutely positive
What is the definition of climate?
1) An area's long term weather pattern
2)When large air masses of different density, moisture, and temperature mee
3)The state of the atmosphere at a given place and time
4)Large volume of air that has similar characteristics of temperature and water
vapor content
Answer:
1) An area's long term weather pattern
Explanation:
Climate is defined as the weather pattern in an area for the long term. Climate means the usual condition of the humidity, temperature, wind, rainfall, and atmospheric pressure in the surface area of Earth for the long term. Usually the time period for a climate in a region is taken over 30-years.
Weather is the state of the atmosphere and climate the long-term weather pattern of the area. For example: degree to which it is hot or cold is weather and expect snow in the Northeast in every January is climate.
Hence, the correct answer is "1) An area's long term weather pattern".
(1) Phosphorus silicon is a semi-conductor
When Silicone is altered with Phosphorus, 4 of its electrons form covalent bonding and the 5th electron becomes delocalized and thus it increases electrical conduction
Answer:
blue blah blue blah
Explanation:
Which of these is not a property of minerals?
A) Clevage
B) Fracture
C) Color
D) Smell
CHEMISTRY HELP
Once the following equation is balanced, what is the correct coefficient for Z₂?
Answer:
The coefficient of Z₂ is 1.
Explanation:
From the question given above:
X + ZY —> XY + Z₂
Next, we shall balance the equation to obtain the coefficient of Z₂. This can be obtained as follow:
X + ZY —> XY + Z₂
There is 1 atom of Z on the left side and 2 atoms on the right side. It can be balance by putting 2 in front of ZY as shown below:
X + 2ZY —> XY + Z₂
There are 2 atoms of Y on the left side and 1 atom on the right side. It can be balance by putting 2 in front of XY as shown below:
X + 2ZY —> 2XY + Z₂
Now, we have 1 atom of X on the left side and 2 atoms on the right side. It can be balance by putting 2 in front of X as shown below:
2X + 2ZY —> 2XY + Z₂
Now the equation is balanced.
Thus, the coefficient of Z₂ is 1.
What is the molecular formula for a compound with a molar mass of 42.08g/mol and an empirical formula of ch2
Answer:
[tex]C_3H_6[/tex]
Explanation:
Hello!
In this case, since the empirical formula is the smallest representation of the molecular formula, it is known that the times in which the empirical formula is into the molecular formula is a whole number and is computed by dividing the molar mass of the molecular formula by that of the empirical formula as shown below:
[tex]\frac{42.08g/mol}{12.01+1.01x2}= \frac{42.08g/mol}{14.03g/mol}=3[/tex]
Thus, the molecular formula times the empirical formula by 3 to obtain:
[tex]C_3H_6[/tex]
Regards!
how are the terms atom and element different?
Answer:
Element is made from same type of atoms
While atom is present in element made up of different particles like proton neutrons electron etc
Explanation:
When all the colors of the spectrum are combined, what will the human
eye see?
A black
B. blue
C. red
D. white
Answer: white?
Explanation:
When all the colors of the spectrum are combined and strike the human eye at the same time, the human eye will see white color. Therefore, option (D) is correct.
What is the electromagnetic spectrum?The electromagnetic spectrum can be described as the range of frequencies of electromagnetic radiation and its wavelengths and photon energies. The electromagnetic spectrum have range from below one hertz to above 10²⁵ hertz.
Electromagnetic radiation with a wavelength between 380 to 760 nm is detected by the human eye and recognized as visible light. Other wavelengths, especially near-infrared and ultraviolet are also sometimes referred to as light.
White light can be defined as a combination of lights of different wavelengths in the visible region of the spectrum. When white light is passed through a prism splits it up into the several colors of light observed in the visible spectrum.
Therefore, all the colors of the spectrum are combined, and the human eye will see white color.
Learn more about electromagnetic spectrum, here:
https://brainly.com/question/15576247
#SPJ6
An isotope has three forms. 30% have a mass of 4 amu, 20% have a mass of 5 amu and
50% have a mass of 3 amu, Average atomic mass will be closest to
The average atomic mass will be 3.70 amu
We have to obtain the average atomic mass by multiplying the mass of each isotope in amu by the relative abundance of the given isotope as contained in the data of the question.
Hence;
Average atomic mass;
(0.30 * 4) + (0.20 * 5) + (0.50 * 3)
= 1.20 + 1.00 + 1.50
= 3.70 amu
https://brainly.com/question/13292428
How would a long period without sunlight affect the food web?
It would cause consumers to consume more food.
It would have no effect on the food web.
It would stop decomposers from breaking down matter.
It would stop producers from producing food.
Answer: it would stop producers from producing food.
Explanation: why? Without the action of the producers to turn sunlight into food, the producers would die, and consumers that rely on them would lose their food source and die too.
Answer:
It would stop producers from producing food
Explanation:
Producers would die, and if producers died, consumers would die too.
Hope this helps
How are food webs and food chains related? HELP IF YOU WANT BRAINLEIST!!
Food webs only contain consumers.
Food webs consist of only one food chain.
Food webs are made of many food chains.
Food webs only contain producers.
Answer: Food webs are made of many food chains is the answer.
Explanation:
Food web consists many food chains.
Which two statements are true about all generators?
They convert motion energy to electric energy.
They have a fixed pair of magnets and a rotating metal coil.
They’re powered by fossil fuels.
They convert electric energy to motion energy.
They use the relative motion of a magnet and a coil of wire.
Answer:
they have a fixed pair of magnets and a rolling coil they convert motion into electric energy they are powered by fosile fuels they use reletive motion of a magnet and coil of a wire
Explanation:
Answer:
They convert motion energy to electric energy.
They use the relative motion of a magnet and a coil of wire.
Explanation:
This is the correct answer.
Give the IUPAC name for each compound.
Answer:
a. 1-fluoro-3,3,4-trimethyl-pentane.
b. 1-iodo-3-ethyl-2-methyl-hexane.
c. 1,3-dichloro-5-dimethyl-hexane.
d. 1-bromo-3-methyl-cyclopentane.
Explanation:
Hello!
In this case, according to the IUPAC rules for the listed alkyl halides, we first need to name the halogens (considering periodic order) then alkyl radicals and finally the parent chain; thus, the names are given below:
a. 1-fluoro-3,3,4-trimethyl-pentane.
b. 1-iodo-3-ethyl-2-methyl-hexane.
c. 1,3-dichloro-5-dimethyl-hexane.
d. 1-bromo-3-methyl-cyclopentane.
e. 5-chloro-1-bromo-1,1,5-trimethyl-pentane (radicals are not clear).
Best regards!
How can you use density to separate mixtures like sand and small plastic pellets?
Answer:
Slide a magnet through the mixture. When you take the magnet off, the iron filings are going to be attracted to the magnet and the sand will stay in the bowl
Explanation:
Answer:
Density can be used to separate the substances that make up a mixture, because each substance in a mixture has its own density. For example, if a mixture of sand and oil is placed in water, the sand will sink to the bottom of the container. The sand is more dense than the water.
Explanation:
Please mark me as brainy if this helps
Write ashort note on the
first battle of
of panipat
Answer:
The First Battle of Panipat was fought between the invading forces of Babur and the Lodi Empire, which took place on 21 April 1526 in North India. It marked the beginning of the Mughal Empire. This was one of the earliest battles involving gunpowderfirearms and field artillery.
For you to write an essay on Panipat first bring into view
Introduction body conclusionThen write a brief story using this format.
How to write a short note on the first battle of Panipat?In writing this essay, you must consider the structure and content of the essay or short note
For structure kick off with
Introduction body conclusionIn conclusion, for the content of the short note you can consider this,
Panipat fought its first battle on 21 April 1526 in the North of India, This battle was fought between the invading powers of Babur and the Lodi Empire.
Read more on History
https://brainly.com/question/6838058
What carpet Burns in a deficiency of O2 a mixture of CO and CO2 forms.Carbon Burns in excess O2 to form only CO2 and CO Burns in excess O2 to form only CO2. Calculate ΔH for C(graphite +1/2O2) →CO(g).
Answer:
Explanation:
From the combustion of carbon, the reactions occurring in limited oxygen conditions are:
[tex]C(graphite) + \dfrac{1}{2}O_{2(g)} \to CO_{(g)}[/tex]
[tex]C(graphite) + O_{2(g)} \to CO_{2(g)}[/tex]
If it occurs in excess, then any leftover CO changes to CO2. i.e.
[tex]C(graphite) + O_{2(g)} \to CO_{2(g)}[/tex] ---- (1)
[tex]CO_{(g)} + \dfrac{1}{2}O_{(g)} \to CO_{2(g)}[/tex] ----- (2)
From (1), the enthalpy change is:
[tex]\Delta H_{rxn1} = \Delta H^0_{fCO_2(g)} - ( \Delta H^0_{f C(graphite)}+ \Delta H^0_{fCO_2(g)}[/tex]
[tex]\Delta H_{rxn1} =-393.5 \ kJ/mol -(0+0)[/tex]
[tex]\Delta H_{rxn1} =-393.5 \ kJ/mol[/tex]
From (2), the enthalpy change is:
[tex]\Delta_{rxn2} = \Delta H^0_{fCO_2(g)} - ( \Delta H^0_{fCO(g)} + \dfrac{1}{2} \Delta H^0_{fO_2(g)})[/tex]
[tex]\Delta_{rxn2} = -393.5 \ kJ/mol -(-110.5 + \dfrac{1}{2}(0))[/tex]
[tex]\Delta_{rxn2} = -283.0 \ kJ/mol[/tex]
Subtracting (2) from (1), we get:
[tex]C(graphite) + O_{2(g)} \to CO_{2(g)} \ \ \ \Delta H_{rxn} = -393.5 \ kJ/mol}[/tex]
[tex]CO_{(g)} + \dfrac{1}{2} O_2(g) \to CO_{2(g)}} \ \ \ \Delta H _{rxn2} = -283.0 \ kJ/mol[/tex]
[tex]C(graphite) + O_{2(g)} \to CO (g) + \dfrac{1}{2}O_{2(g)} \ \ \ \Delta H_{rxn} = -110.5 \ kJ/mol[/tex]
[tex]C(graphite) + \dfrac{1}{2} O_{2(g)} \to CO (g) \ \ \ \Delta H_{rxn} = -110.5 \ kJ/mol[/tex]
The enthalpy change ΔH of the reaction = -110.5 kJ/mol
determine the molar mass for ammonia (NH3) in g/mol.
Answer:
17.031 g/mol
Explanation:
The order is Solumedrol 3 mg/kg for a child weighing 20 kg. Solumedrol is available as 125 mg/2ml. How many ml will be given
Answer:
0.96mL must be given
Explanation:
First, we need to obtain the mass of Solumedrol required for the child by using its mass. Then, with this mass we can solve the volume that must be administered:
Mass of solumedrol required:
20kg * (3mg / kg) = 60mg of solumedrol are required.
Volume given:
60mg Solumedrol * (2mL / 125mg) =
0.96mL must be given
.. Identify how many atoms of each element are in the molecule: H2O2
Answer : There are 2 atoms of hydrogen element and 2 atoms of oxygen element are in [tex]H_2O_2[/tex] molecule.
Explanation:
Molecule : It is the smallest particle in the chemical compound or chemical element that has the same chemical properties of that compound or element.
Atom : It is the smallest unit of matter.
The given molecule is [tex]H_2O_2[/tex].
In the molecule of [tex]H_2O_2[/tex], there are two elements which are hydrogen and oxygen.
In the molecule of [tex]H_2O_2[/tex], there are 2 atoms of hydrogen element and there are 2 atoms of oxygen element.
Hence, there are 2 atoms of hydrogen element and 2 atoms of oxygen element are in [tex]H_2O_2[/tex] molecule.
Which word describes the amount of matter an object contains?
altitude
density
mass
pressure
Answer:
Mass
Explanation:
Answered this question multiple times and got it correct
Hope this helped!
Stay safe!
A patient is prescribed 100mg/day of antibiotic for 2 weeks. The antibiotic is available in vials that contain 20mg/vial of the drug. How many vials are necessary for the entire treatment?
what element is in group 13, period 4
Answer:
Gallium
Explanation:
Answer:
Gallium
Explanation:
How many milliliters of 60% carbonic acid must be mixed with how many milliliters of 15% carbonic acid to make 650 milliliters of a 38% carbonic acid solution
Answer:
348.9 mL of the 60% solution and 251.1 mL of the 15% solution.
Explanation:
First, we calculate how many mililiters of pure carbonic acid are there in 650 mL of a 38% solution:
650 mL * 38/100 = 247 mLThen we can express the sum of both initial solutions as:
1) x * 60/100 + y * 15/100 = 247for the volume of carbonic acid; and
2) x + y = 600 mLFor the volume of the solutions.
We now have a system of two equations and two unknowns (x is the volume of the 60% solution and y is the volume of the 15% solution).
We express x in terms of y in equation 2):
x = 600 - yAnd replace x in equation 1):
(600 - y) * 60/100 + y * 15/100 = 247360 - 0.6y + 0.15y = 247-0.45y = -113y = 251. 1 mLFinally we calculate x using equation 2):
x + 251.1 = 600x = 348.9 mLWhich chemical equation is balanced?
a. 2LiOH + CO2 → Li2CO3 + H2O
b. LiOH + CO2 → Li2CO3 + H2O
c. LiOH + 3CO2 → 2Li2CO3 + H2O
d. 4LiOH + CO2 → Li2CO3 + 2H20
The balance chemical equation is 2LiOH + CO2 → Li2CO3 + H2O. Therefore, option A is correct.
What is balance chemical equation ?A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and the change are both equal.
The law of conservation of mass states that when a chemical reaction takes place, the mass of the reactants and products should be equal. As a result, during the chemical process, the number of atoms in each element remains constant. The chemical equation must be balanced as a result.
The chemical equation is said to be balanced if there are no inequalities. Every element in this illustration now has the same amount of atoms on the reactant and product sides.
Thus, option A is correct.
To learn more about balance chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
Give an example of chemical reaction that occurs in everyday life
Answer: metal and salt water
Explanation: salt starts to brake down metal and metal is everywhere in the ocean hope this helps
Answer:
baking a cake.
Explanation:
baking a cake is an example of a chemical reaction that happens daily because a new substance is forming when the cake is being baked. hope this helps! :)
1.7 x 10 cm= significant figures
Answer:
its 2
Explanation:
