Answer:
– 844 kJ/mol.
Explanation:
The following data were obtained from the question:
N2(g) + 3 F2(g) –––> 2 NF3(g)
Enthalpy of N≡N (N2) = 945 kJ/mol
Enthalpy of F–F (F2) = 155 kJ/mol
Enthalpy of N–F3 (NF3) = 283 kJ/mol
Enthalpy change (∆H) =?
Next, we shall determine the enthalpy of reactant.
This is illustrated below:
Enthalpy of reactant (Hr) = 945 + 3(155)
Enthalpy of reactant (Hr) = 945 + 465
Enthalpy of reactant (Hr) = 1410 kJ/mol
Next, we shall determine the enthalpy of the product.
This is illustrated below:
Enthalpy of product (Hp) = 2 x 283
Enthalpy of product (Hp) = 566 kJ/mol
Finally, we shall determine the enthalpy change (∆H) for the reaction as follow:
Enthalpy of reactant (Hr) = 1410 kJ/mol
Enthalpy of product (Hp) = 566 kJ/mol
Enthalpy change (∆H) =?
Enthalpy change (∆H) = Enthalpy of product (Hp) – Enthalpy of reactant (Hr)
Enthalpy change (∆H) = 566 – 1410
Enthalpy change (∆H) = – 844 kJ/mol
Answer:
– 844 kJ/mol.
Explanation:
The following data were obtained from the question:
N2(g) + 3 F2(g) –––> 2 NF3(g)
Enthalpy of N≡N (N2) = 945 kJ/mol
Enthalpy of F–F (F2) = 155 kJ/mol
Enthalpy of N–F3 (NF3) = 283 kJ/mol
Enthalpy change (∆H) =?
Next, we shall determine the enthalpy of reactant.
This is illustrated below:
Enthalpy of reactant (Hr) = 945 + 3(155)
Enthalpy of reactant (Hr) = 945 + 465
Enthalpy of reactant (Hr) = 1410 kJ/mol
Next, we shall determine the enthalpy of the product.
This is illustrated below:
Enthalpy of product (Hp) = 2 x 283
Enthalpy of product (Hp) = 566 kJ/mol
Finally, we shall determine the enthalpy change (∆H) for the reaction as follow:
Enthalpy of reactant (Hr) = 1410 kJ/mol
Enthalpy of product (Hp) = 566 kJ/mol
Enthalpy change (∆H) =?
Enthalpy change (∆H) = Enthalpy of product (Hp) – Enthalpy of reactant (Hr)
Enthalpy change (∆H) = 566 – 1410
Enthalpy change (∆H) = – 844 kJ/mol
Explanation:
Ammonia, methane, and phosphorus trihydride are three different compounds with three different boiling points. Rank their boiling points in order from lowest to highest.
A. CH4< NH3 < PH3
B. NH3 < PH3< CH4
C. CH4 < PH3 < NH3
D. NH3 < CH4< PH3
E. PH3< NH3 < CH4
Answer:
B. NH3 < PH3< CH4
Explanation:
Hello,
In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:
B. NH3 < PH3< CH4
Best regards.
Which of the following is a covalent bond? A NaCl B K2O C H2O D MgO
Answer:
[tex]H_2O[/tex]
Explanation: Research has proven that ;
Water is a Polar Covalent Molecule
It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and the two hydrogen atoms are not evenly distributed around the oxygen atom.
(a) Identify the name of the method used below for the separation.
(b) Give one more application of this method of separation.
(c) What is the name for the line at position B ?
(d) what conclusions can you draw about the colours present in sweets C and D ?
Answer:
(a) Chromatography
(b) DNA fingerprinting
(c) Origin
(d) Sweet C consists of more colours than sweet D.
ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.
Explanation:
Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.
It can be used to determine the soluble constituents of a given mixture. And for purification purpose.
Which of the following is required for the flow of current in all systems?
a) the presence of ions
b) an electrical potential ofo
c) a closed circuit
d) a short circuit
Answer:
I would say c) a closed circuit.
Hope I was right.
The total kinetic energy of a body is known as:
A. Thermal energy
B. Convection
C. Potential energy
D. Temperature
The total kinetic energy of a body is known as Thermal energy. Option A
What is thermal energy?Thermal energy is the direct sum of all the available random kinetic energies of molecules.
Also note that thermal energy is directly proportional to temperature in Kelvin.
Thus, the total kinetic energy of a body is known as Thermal energy. Option A
Learn more about thermal energy here:
https://brainly.com/question/19666326
#SPJ1
Answer:
A.) Thermal energy
Explanation:
I got it correct on founders edtell
Write a balanced chemical equation for the base hydrolysis of methyl butanoate with NaOH. (Use either molecular formulas or condensed structural formulas, but be consistent in your equation.)
Explanation:
C5H10O2 + NaOH = C2H5COONa + C2H5OH
your result are : sodium propanoate and ethanol
A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.
What is hydrolysis?Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.
The base hydrolysis of methyl butanoate is shown as,
C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH
Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).
Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.
Learn more about hydrolysis here:
https://brainly.com/question/22078321
#SPJ2
The half-life of radium-226 is 1620 years. What percentage of a given amount of the radium will remain after 900 years
Answer:
68%
Explanation:
Since we need a percentage we can use any number we want for our initial value.
5(1/2)^900/1620 = 3.40
(3.40 / 5)*100 = 68%
To make sure lets use a different initial amount
1(1/2)^900/1620 = 0.68
(0.68/1) * 100 = 68%
To solve this question, we'll assume the initial amount of radium-226 to be 1.
Now, we shall proceed to obtaining the percentage of radium-226 that will after 900 years. This can be obtained as illustrated below:
Step 1Determination of the number of half-lives that has elapsed.
Half-life (t½) = 1620 years
Time (t) = 900 years
Number of half-lives (n) =?[tex]n = \frac{t}{t_{1/2}}\\\\n = \frac{900}{1620}\\\\n = \frac{5}{9}[/tex]
Step 2:Determination of the amount remaining
Initial amount (N₀) = 1
Number of half-lives (n) = 5/9
Amount remaining (N) =?[tex]N = \frac{N_{0} }{2^{n}}\\\\N = \frac{1}{2^{5/9}}[/tex]
N = 0.68Step 3Determination of the percentage remaining.
Initial amount (N₀) = 1
Amount remaining (N) = 0.68
Percentage remaining =?Percentage remaining = N/N₀ × 100
Percentage remaining = 0.68/1 × 100
Percentage remaining = 68%Therefore, the percentage amount of radium-226 that remains after 900 years is 68%
Learn more: https://brainly.com/question/10406952
Why do prices increase when demand for a product is high? Companies know they can make more money by selling fewer products at higher prices. Companies know that people will be willing to spend more to get an in-demand product. Companies take advantage of the demand to make people spend more money on excess products. Companies know they can stop production and still make money on sales.
Answer:
Companies know that people will be willing to spend more to get an in-demand product.
Explanation:
When a product is really in demand, many customers are willing to part with more money order to purchase the product, as a result of that, many companies may take advantage of the increasing demand for the product to hike it's price.
Hence, the increase in price may not really have a negative impact on the quantity demanded because the demand for the product is high and customers are willing to spend more money in order to purchase an in-demand product, hence the answer above.
Prices increase when demand is high because companies know that people will be willing to spend more to get in-demand products.
Prices generally increase with higher demand for goods because the higher demand creates pressure for the supply to meet up.
Manufacturing companies can either increase their production to meet up with demand at the same price or capitalize on the situation to make more money by increasing the price without increasing the supply.
Since there is a buying pressure on the product in the market already, people would still be open to buying even at higher prices.
More on demand and prices can be found here: https://brainly.com/question/16170198?referrer=searchResults
Question 8 of 30
When is a redox reaction spontaneous?
A. When a metal electrode is in contact with an electrolyte
B. When a power source supplies an electrical current
C. When the cell potential is positive
D. When the cell potential is negative
According to the concept of redox reactions, the answer to this question is option C.
When the cell potential is positive. A redox reaction is spontaneous when the cell potential is positive.The cell potential is the measure of the driving force of the chemical reaction occurring in the electrochemical cell. In an electrochemical cell, a redox reaction occurs, which leads to the production of an electric potential.
If this potential is positive, then the redox reaction is considered spontaneous. However, if the potential is negative, then the reaction is non-spontaneous.In general, a redox reaction is spontaneous if the potential difference between the two electrodes of the cell is positive. This means that the reaction will occur spontaneously without any external energy input.
Thus, the correct option is C.
Learn more about redox reaction,here:
https://brainly.com/question/28300253
#SPJ4
When titrating a strong acid with a strong base, after the equivalence point is reached, the pH will be determined exclusively by: Select the correct answer below:
A) hydronium concentration
B) hydroxide concentration
C) conjugate base concentration
D) conjugate acid concentration
Answer:
B) hydroxide concentration
Explanation:
Hello,
In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.
After that, due to the fact that the pH is related with the pOH as shown below:
pH=14-pOH
We can directly compute the pH.
Best regards.
A student completed the experiment but found that the total amount of material recovered weighed more than the original sample. What is the most likely source of error and how may it be corrected?
Answer:
This is due to the water moisture present in the recovered sample.
Explanation:
The total amount of material recovered isn’t meant to weigh more than the original sample. However when this happens then it means there is the presence of water moisture in the recovered sample.
The recovered samples however needs to be heated to make it dry and eliminate the water moisture through evaporation.
When 1604 J of heat energy is added to 48.9 g of hexane, C6H14, the temperature increases by 14.5 ∘C. Calculate the molar heat capacity of C6H14.
Answer:
THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C
Explanation:
1604 J of heat is added to 48.9 g of hexane
To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.
Since 1604 J of heat = 48.9 g of hexane
Molar mass of hexane = 86 g/mol = 1 mole
then;
1604 J = 48.9 g
x = 86 g
x = 1604 * 86 / 48.9
x = 4205.4 J
Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.
In other words,
heat = molar heat capacity * temperature change
molar heat capacity = heat/ temperature change
Molar heat capacity = 4205.4 J / 14.5 C
Molar heat capacity = 290.027 J/C
The molar heat capacity of hexane is 290.027 J/ C
Match the words below to the appropriate blanks in the sentences. Make certain each sentence is complete before submitting your answerβ-1,4- and α-1,6-glycosidicβ-1,4-glycosidicgalactosean unbranchedglucosea branchedfructoseα-1,6-glycosidicAmylose is ......... polymer of ....... units joined by ........ bonds. Amylopectin is ....... polymer of .......units joined by ........ bonds.
The words given are not clear, so the clear question is as follows:
Match the words below to the appropriate blanks in the sentences. Make certain each sentence is complete before submitting your answer:
A. β-1,4- and α-1,6-glycosidic
B. α-1,4-glycosidic
C. α-1,4-galactose
D. an unbranched glucose
E. a branched fructose
F. α-1,6-glycosidic
Amylose is ......... polymer of ....... units joined by ........ bonds.
Amylopectin is ....... polymer of .......units joined by ........ bonds.
Answer:
D. an unbranched glucose
C. α-1,4-galactose
B. α-1,4-glycosidic
E. a branched fructose
A. β-1,4- and α-1,6-glycosidic
F. α-1,6-glycosidic
Explanation:
Amylose and amylopectin are two types of polysaccharides that can be found in starch granules.
Amylose is linear or unbranched glucose polymer of α-1,4-galactose units that are joined by α-1,4-glycosidic.
Amylopectin is a branched fructose polymer of β-1,4- and α-1,6-glycosidic units joined by α-1,6-glycosidic bonds.
Hence, the correct answers in the sequential order are:
Amylose:
D. an unbranched glucose
C. α-1,4-galactose
B. α-1,4-glycosidic
Amylopectin:
E. a branched fructose
A. β-1,4- and α-1,6-glycosidic
F. α-1,6-glycosidic
Gaseous methane (CH4) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO) and gaseous water (H2O) . Suppose 0.963 g of methane is mixed with 7.5 g of oxygen. Calculate the minimum mass of methane that could be left over by the chemical reaction. Be sure your answer has the correct number of significant digits.
Answer:
0 g.
Explanation:
Hello,
In this case, since the reaction between methane and oxygen is:
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
If 0.963 g of methane react with 7.5 g of oxygen the first step is to identify the limiting reactant for which we compute the available moles of methane and the moles of methane consumed by the 7.5 g of oxygen:
[tex]n_{CH_4}=0.963gCH_4*\frac{1molCH_4}{16gCH_4}=0.0602molCH_4\\ \\n_{CH_4}^{consumed}=7.5gO_2*\frac{1molO_2}{32gO_2}*\frac{1molCH_4}{2molO_2} =0.117molCH_4[/tex]
Thus, since oxygen theoretically consumes more methane than the available, we conclude the methane is the limiting reactant, for which it will be completely consumed, therefore, no remaining methane will be left over.
[tex]left\ over=0g[/tex]
Regards.
Find the pH of these buffer solutions using the information provided: 1L solution containing 80g of lactic acid (MW
Answer:
pH of the solution is 2.0
Explanation:
The lactic acid is a weak acid that is in equilibrium with water as follows:
Lactic acid + H2O ⇄ Lactate + H₃O⁺
And Ka for lactic acid: 1.38x10⁻⁴
Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]
Initial concentration of lactic acid is (MW: 112.06g/mol):
80g * (1mol / 112.06g) / 1L = 0.714M
The equilibrium concentration of the species in the equilibrium are:
[Lactate] = X
[H₃O⁺] = X
[Lactic acid] = 0.714-X
Replacing in Ka expression:
1.38x10⁻⁴ = [X] [X] / [0.714-X]
9.8532x10⁻⁵ - 1.38x10⁻⁴X = X²
9.8532x10⁻⁵ - 1.38x10⁻⁴X - X² = 0
Solving for X:
X = -1.0x10⁻². False solution, there is no negative concentrations
X = 9.86x10⁻³M. Right solution.
As [H₃O⁺] = X
[H₃O⁺] = 9.86x10⁻³M
and pH = -log [H₃O⁺] = -log 9.86x10⁻³M
pH = 2.0
pH of the solution is 2.0Calculate [OH-] given [H3O+] in each aqueous solution and classify the solution as acidic or basic. [H3O+] = 2.6 x 10-8 M
Answer:
To calculate the [OH-] in the solution we must first find the pOH
That's
pH + pOH = 14
pOH = 14 - pH
First to find the pH we use the formula
pH = - log [H3O+]From the question
[H3O+]= 2.6 × 10^-8 M
pH = - log 2.6 × 10^-8
pH = 7.6
pH = 8
So we pOH is
pOH = 14 - 8 = 6
To find the [OH-] we use the formula
pOH = - log [OH-]6 = - log [OH-]
Find antilog of both sides
[OH-] = 1.0 × 10^-6 MThe solution is slightly basic since it's pH is in the basic region and slightly above the neutral point 7
Hope this helps you
(9443+45−9.9) (9443+45−9.9) ×8.4× 10 6
Select the true statement concerning voltaic and electrolytic cells. Select one: a. Voltaic cells involve oxidation-reduction reactions while electrolytic cells involve decomposition reactions. b. Voltaic cells require applied electrical current while electrolytic cells do not. . c. all electrochemical cells, voltaic and electrolytic, must have spontaneous reactions. d. Electrical current drives nonspontaneous reactions in electrolytic cells.
Answer:
Electrical current drives nonspontaneous reactions in electrolytic cells.
Explanation:
Electrochemical cells are cells that produce electrical energy from chemical energy.
There are two types of electrochemical cells; voltaic cells and electrolytic cells.
A voltaic cell is an electrochemical cell in which electrical energy is produced from spontaneous chemical process while an electrolytic cell is an electrochemical cell where electrical energy is produced from nonspontaneous chemical processes. Current is needed to drive these nonspontaneous chemical processes in an electrolytic cell.
Answer:
electrolytic cells generate electricity through a non-spontaneous reaction while voltaic cells absorb electricity to drive a spontaneous reaction.
Explanation:
Answer via Educere/ Founder's Education
What creation would you make if you had access to any of the chemical elements? can someone answer this for me please.
Answer:
Depends on the chemicals.
Explanation:
The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.
Calculate ΔS∘rxn for the balanced chemical equation 2H2S(g)+3O2(g)→2H2O(g)+2SO2(g) Express the entropy change to four significant figures and include the appropriate units.
Answer:
-170.65
188.8+ 256.8-205.8-(2x205.2)
-170.65 is the entropy change.
What is Entropy Change?Entropy trade is the phenomenon that is the measure of change of disorder or randomness in a thermodynamic gadget. It is associated with the conversion of heat or enthalpy completed in work. A thermodynamic device that has extra randomness means it has high entropy.
Subtract the sum of the absolute entropies of the reactants from the sum of the absolute entropies of the products, each extended by using their suitable stoichiometric coefficients, to reap ΔS° for the reaction.
Learn more about entropy change here: https://brainly.com/question/14257064
#SPJ2
15. Calculate the critical angle of glass and water combination. Show your calculation. 16. What is the critical angle for the interface between Mystery A and glass
Answer:
15. Critical angle of glass and water combination, θ = 62.45°
16. Critical angle for the interface between Mystery A and glass, θ = 37.93°
Note; The question is incomplete. The complete question is as follows:
Medium Air Water Glass Mystery A Mystery B Table-2 Speed (m/s) 1.00 C 0.75 c 0.67 0.41 c 0.71 c n 1.00 1.33 1.50 Index of Refraction n of a given medium is defined as the ratio of speed of light in vacuum, c to the speed of light in a medium, v. n = c/v
Table-4: Incident Angle (degrees) Reflected Angle Refracted angle (degrees) (degrees) % Intensity of reflected ray 0 10 20 30 40 50 N/A N/A N/A 30 40 50 0 11.3 22.7 34.2 46.3 59.5 N/A N/A N/A 0.67 1.22 3.08 % Intensity of refracted ray 100 100 100 99.33 98.78 96.92
When rays travel from a denser medium to a less dense medium, we can define a critical angle of incidence θ such that refracted angle θ₂ = 90°. Applying Snell's law: Critical angle θ = sin-1(n₂/n₁).
When the angle of incidence is greater than the critical angle, 100% of the light intensity is reflected. This is called total internal reflection because all the light is reflected.
15. Calculate the critical angle of glass and water combination. Show your calculation.
16. What is the critical angle for the interface between Mystery A and glass?
Explanation:
15. Applying Snell's law; Critical angle θ = sin-1(n₂/n₁).
where n₂,refractive index of water = 1.33, n₁, refractive index of glass = 1.50 since glass is denser than water
θ = sin-1(1.33/1.50)
θ = 62.45°
Critical angle of glass and water combination, θ = 62.45°
16. Refractive index of mystery A , n = c/v
where v = 0.41 c
therefore, n = c / 0.41 c = 2.44
Critical angle for the interface between Mystery A and glass, θ = sin-1(n₂/n₁).
where n₂,refractive index of glass = 1.50, n₁, refractive index of mystery A = 2.44 since mystery A is denser than glass as seen from its refractive index
θ = sin-1(1.50/2.44)
θ = 37.93°
Critical angle for the interface between Mystery A and glass, θ = 37.93°
4NH3(g) 5O2(g)4NO(g) 6H2O(g) Using standard thermodynamic data at 298K, calculate the free energy change when 1.81 moles of NH3(g) react at standard conditions.
Answer:
-434.14 kJ
Explanation:
Step 1: Write the balanced equation
4 NH₃(g) + 5 O₂(g) ⇒ 4 NO(g) + 6 H₂O(g)
Step 2: Calculate the standard free energy change (ΔG°r) for the reaction
We will use the following expression.
ΔG°r = 4 mol × ΔG°f(NO(g)) + 6 mol × ΔG°f(H₂O(g)) - 4 mol × ΔG°f(NH₃(g)) - 5 mol × ΔG°f(O₂(g))
ΔG°r = 4 mol × (86.55 kJ/mol) + 6 mol × (-228.57 kJ/mol) - 4 mol × (-16.45 kJ/mol) - 5 mol × (0 kJ/mol)
ΔG°r = -959.42 kJ
Step 3: Calculate the standard free energy change for 1.81 moles of NH₃
959.42 kJ are released per 4 moles of NH₃.
[tex]\frac{-959.42 kJ}{4mol} \times 1.81mol = -434.14 kJ[/tex]
Solid cesium bromide has the same kind of crystal structure as CsCl which is pictured below: If the edge length of the unit cell is 428.7 pm, what is the density of CsBr in g/cm3.
Answer:
[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]
Explanation:
Let recall the crystal structure of CsBr obtains a BCC structure. In a BCC structure, there exist only two atom per cell.
The density d of CsBr in g/cm³ can be calculated by using the formula:
[tex]\mathtt{ density \ d = \dfrac{z \times molar\ mass \ (M)}{ edge \ length \ (a) \ \times avogadro's \ number \ (N)}}[/tex]
where;
z = 1 mole of CsBr
edge length = 428.7 pm = (4.287 × 10⁻⁸)³ cm
molar mass of CsBr = 212.81 g/mol
avogadro's number = 6.023 × 10²³
[tex]\mathtt{ density \ d = \dfrac{1 \times 212.81}{(4.287 \times 10^{-8})^3 \times 6.023 \times 10^{23}}}[/tex]
[tex]\mathtt{ density \ d = \dfrac{ 212.81}{47.4540533}}[/tex]
[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]
Which of the following provides a characteristic of
MgO(s) with a correct explanation?
Choose 1 answer:
А
It is hard because its ions are held together by strong
electrostatic attractions.
B
It is malleable because its atoms can easily move past
one another without disrupting the bonding.
It is a poor conductor of electricity because its
electrons are tightly held within covalent bonds and
lone pairs.
It has a high melting point because its molecules
interact through strong intermolecular forces.
Answer:
А It is hard because its ions are held together by strong electrostatic attractions.
B It is malleable because its atoms can easily move past one another without disrupting the bonding.
Explanation:
These are correct explanations of the properties of magnesium.
C is wrong. Mg is a good conductor of electricity and it has metallic bonds.
D is wrong. Mg has no molecules. It has no intermolecular forces.
Please help, Which molecule is shown below
Answer:
Option B. 3–methylheptane.
Explanation:
To obtain the name of the compound given in the question above, we must
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent groups attached.
4. Locate the position of the substituent group attached by giving it the lowest possible count.
5. Combine the above to obtain the name.
Now let us name the compound given in the question above.
1. The compound is an alkane since it contains only single bond.
2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.
3. The substituent group attached is
—CH3 i.e methyl.
4. The substituent group attached is at carbon 3.
5. Therefore, the name of the compound is:
3–methylheptane.
If the theoretical yield of a reaction is 332.5 g and the percent yield for the reaction is 38 percent, what's the actual yield of product in grams? \
A. 8.74 g
B. 12616 g
C. 116.3 g
D. 126.4 g
Answer: D - 126.4g
Explanation:
% Yield = Actual Yield/Theoretical Yield
38% = Actual Yield/332.5
38/100 = Actual Yield/332.5
(.38)(332.5) = 126.35 g = 126.4 g Actual Yield
Answer:
is D. the correct answer
Explanation:
I'm not sure if it is. Please let me know if I'm mistaking.
A chemist prepares a solution of sodium nitrate by measuring out of sodium nitrate into a volumetric flask and filling the flask to the mark with water.
Calculate the concentration in mol/L of the chemist's sodium nitrate solution. Round your answer to 3 significant digits.
Answer:
5.74M or 5.74 mol/L (to 3 sign. fig.)
Explanation:
The molar mass of NaNO3 is 85g/mol, which means that:
1 mole of NaNO3 - 85g
? moles - 122.0g
= 122/85 = 1.44 moles
Concentration in mol/L = no. of moles (moles) ÷ volume (L)
[tex]\frac{1.44}{0.250}[/tex] = 5.74M or 5.74 mol/L (to 3 sign. fig.)
I hope the steps are clear and easy to follow.
Fireworks are chemical reactions that release energy. Which of these phenomena are caused by chemical reactions that release energy? If you’re not sure, make a guess.
Answer:
All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.
The ΔHvap of nitrous oxide is 16.53 kJ · mol−1 and its ΔSvap is 89.51 J · mol−1 · K−1. What it the boiling point of nitrous oxide?
Answer:
[tex]T_b=-88.48\°C[/tex]
Explanation:
Hello,
In this case, since the entropy of vaporization is defined in terms of the enthalpy of vaporization and the boiling point of the given substance, nitrous oxide, as shown below:
[tex]\Delta _{vap}S=\frac{\Delta _{vap}}{T_b}[/tex]
Solving for the boiling point of nitrous oxide, we obtain:
[tex]T_b=\frac{\Delta _{vap}H}{\Delta _{vap}S}=\frac{16.53\frac{kJ}{mol}*\frac{1000J}{1kJ} }{89.51\frac{J}{mol} } \\ \\T_b=184.67K[/tex]
Which in degree Celsius is also:
[tex]Tb=184.67-273.15\\\\T_b=-88.48\°C[/tex]
Best regards.
Janet observes that bubbles rise inside water when water is heated. Which of the following best names and explains the change that causes bubbles to rise?
Answer:
Boiling
Explanation:
When a liquid is heated, the vapor pressure rises steadily. When water attains a temperature of 100°C or 212°F its vapor pressure is now equal to the atmospheric pressure at sea level, this is what we mean by boiling.
When this occurs, water continues to evaporate untill the vapor pressure inside the bubbles becomes high enough to stop water bubbles from collapsing again from the pressure of the water around it so the bubbles rise and break the surface.
