Answer:
The volume of the cylinder is [tex]653.71\ \text{cm}^3[/tex]
Explanation:
Given that,
The height of the cylinder is 13 cm
Radius of the cylinder is 4 cm
We need to find the volume of the cylinder. The formula that is used to find the volume of a cylinder is given by :
[tex]V=\pi r^2 h\\\\V=\dfrac{22}{7} \times (4)^2 \times 13\\\\V=653.71\ \text{cm}^3[/tex]
So, the volume of the cylinder is [tex]653.71\ \text{cm}^3[/tex]
Answer:
653.45 is the answer
Explanation:
Identify the wood turning equipment and what it does.
А
is used to turn wood. It rotates and carves wood to produce a
form.
Answer:
lathe
perfectly symmetrical
Answer: A lathe is used to turn wood . It rotates and carves wood to produce a perfectly symmetrical form .
First one is lathe .
Second one is perfectly symmetrical .
Explanation: I just took the test on Plato and had 100%
6. What are the methods to control noise pollution?
Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.
Answer:
You have to:
a) Improve your insulation.
b) Install a fence
c) Use modern Acoustic wall panels
d) Plant trees
e) Reduce electronic volumes,e.t.c.
Explanation:
okay.
identify properties of a human body system
Answer:
integumentary, skeletal, muscular, nervous, endocrine, cardiovascular, lymphatic, respiratory, digestive, urinary, and reproductive
Explanation:
and this is biology not physics
in the derivation of the time period of a pendulum in electric field when considering the fbd of bob to find the g effective why do we neglect tension
Answer:
we learned that an object that is vibrating is acted upon by a restoring force. The restoring force causes the vibrating object to slow down as it moves away from the equilibrium position and to speed up as it approaches the equilibrium position. It is this restoring force that is responsible for the vibration. So what forces act upon a pendulum bob? And what is the restoring force for a pendulum? There are two dominant forces acting upon a pendulum bob at all times during the course of its motion. There is the force of gravity that acts downward upon the bob. It results from the Earth's mass attracting the mass of the bob. And there is a tension force acting upward and towards the pivot point of the pendulum. The tension force results from the string pulling upon the bob of the pendulum. In our discussion, we will ignore the influence of air resistance - a third force that always opposes the motion of the bob as it swings to and fro. The air resistance force is relatively weak compared to the two dominant forces.
The gravity force is highly predictable; it is always in the same direction (down) and always of the same magnitude - mass*9.8 N/kg. The tension force is considerably less predictable. Both its direction and its magnitude change as the bob swings to and fro. The direction of the tension force is always towards the pivot point. So as the bob swings to the left of its equilibrium position, the tension force is at an angle - directed upwards and to the right. And as the bob swings to the right of its equilibrium position, the tension is directed upwards and to the left. The diagram below depicts the direction of these two forces at five different positions over the course of the pendulum's path.
that's what I know so far
give an example of a balanced force and explain what makes it a balanced force
Monochromatic light of wavelength 649 nm is incident on a narrow slit. On a screen 2.25 m away, the distance between the second diffraction minimum and the central maximum is 1.99 cm. (a) Calculate the angle of diffraction θ of the second minimum. (b) Find the width of the slit.
Answer:
a)0.51°
b)1.47×10^-4m
Explanation:
a)for a single slit experiment, the minima that has an angle of θ towards the centre needs to satisfy the expression below.
bsin(θ)= mλ.........................(*)
Where b= width of the slit
The distance on the screen from Central angle can be expressed as
Sin(θ)= y/d............. (**)
d and y is the horizontal distance between slit and screen
If we input eqn(**) into equation (*) we have
y= mλd/b................(z)
In order to find angle (θ) we have
(θ)= sin-(1.99×10^-2)/2.25
= 0.51°
Therefore, angle of diffraction θ of the second minimum is 0.51°
b)to find the width of the sloth using eqn(z) by substitute the values, we have
b= (2)(649×10^-9)(2.25)/1.99×10^-2
b= 1.47×10^-4m
Therefore, the width of the slit is 1.47×10^-4m
Find the odd one out a)Planets moving on it's axis,Strings of guitar (being played),Motion of a ferry wheel,The vehicles moving on a straight road. b)Motion of the moon around the earth,Motion of the earth around the sun,Motion of a merry-go-round,Heart-beat in a healthy person. c)Motion of a bullet fired from gun,Motion of a football player in the ground,Motion of a vehicle on a straight road,Motion of an apple falling from a tree
Answer:
a) Strings of guitar (being played)
b) Heart-beat in a healthy person
c) Motion of an apple falling from a tree
Explanation:
a) The motion of the string of a guitar being played is the only motion involving simple harmonic motion.
b) All the other motions are circular motion except the heart beat in a healthy person, which is periodic.
c) The motion of an apply falling from a tree is the only motion under the complete influence of gravity from the onset till the end.
element X has two isotopes: X-27 and x-29. x-27 has an atomic mass of 26.975 and a relative abundance of 82.33%, and X-29 has an atomic mass of 29.018 and a relative abundance of 17.67%. calculate the atomic mass of element X. show your work
Answer:
27.34 (no unit)
Explanation:
26.975*82.33%+29.018*17.67%
=27.34
Suppose an experiment is designed to test the durability of batteries in different conditions. All of the batteries tested are double-A (AA) Brand X. All sets of batteries are preconditioned in different environmental conditions for exactly 168 hours (1 week).
Set 1: 0°C (freezing point of water)
Set 2: 24°C (approximately room temperature)
Set 3: 37°C (approximately body temperature)
The batteries are then continuously used to power identical mechanical drummer toys. As long as the toy keeps drumming the battery is considered functional. The drumming time for each toy is measured as an indication of battery durability. In this experiment, which condition is not controlled?
A.) temperature
B.) brand of batteries
C.) test for durability
D.) type of battery (battery size)
Answer:
I assume its c. Since its talking about testing.
Explanation:
Answer:
The answer is test of durability
Explanation:
State 1 difference between 1 way rotary motion and reversible rotary motion
Answer:
The difference between One-way as well as reversible rotary motion is described below.
Explanation:
Unless rotary motions occur restricted to single direction exclusively (i.e. whether clockwise as well as anti-clockwise only), it is defined as another rotary 'one-way' motion.This motor establishes that continuously variable movement at 360 ° chemically guided is conceivable. The rotating is regulated, and for a particular direction, the biochemical occurrences guiding rotation become incredibly selective.A driver of a car stopped at a gas station to fill up his gas tank. He looked at his watch, and the time read exactly 4 : 45 4:45 p.m. At this time, he started pumping gas into the tank. At exactly 4 : 50 4:50, the tank was full and he noticed that he had pumped 12.5 12.5 gallons. What is the average rate of flow of the gasoline into the gas tank
Answer:
Explanation:
Average rate = gallons / minutes
If 12.5gallons in 5mins
Xgallons in 1mins
12.5/5 = 2.5gallons per minute
Will mark as BRAINLIEST.......
The position vector is given by vector r= 5t² I cap + 2 t³ j cap + 2 k cap. Find it's velocity and acceleration at t=2s.
Answer:
We have the position vector given in terms of time t. r(t) = t^3*i + t^2*j
To find the velocity vector we have to differentiate r(t) with respect to time.
r'(t) = 3t^2*i + 2t*j
The vector representing acceleration is the derivative of the position vector
r''(t) = 6t*i + 2*j
When time t = 2.
The velocity vector is 3*2^2*i + 2*2*j
=> 12*i + 4*j
The speed is the absolute value of the velocity vector or sqrt(12^2 + 4^2) = sqrt (144 + 16) = sqrt 160
The acceleration vector is 6*2*i + 2*j
=> 12*i + 2*j
The required acceleration at t=2 is 12*i + 2*j and the speed is sqrt 160.
Explanation:
Can I have thx and brainliest?
Match the words to the correct blanks in the sentences. Use each choice only once. a. The collapse of a protostar with less than 0.08 times the mass of the Sun is halted by________. b. As a protostar shrinks in size, its central temperature rises along with its________. c. A star that has not yet finished forming is called a_______. d. A forming star spins more rapidly as it collapses because of conservation of________. e. If a protostar has a mass too small for it to sustain nuclear fusion it becomes the type of object known as a________.A. thermal pressureB. angular momentumC. energy balanceD. degeneracy pressureE. brown dwarfF. gravitational equilibriumG. protostar
Answer:
The collapse of a protostar with less than 0.08 times the mass of the Sun is halted by DEGENERACY PRESSURE. b. As a protostar shrinks in size, its central temperature rises along with its THERMAL PRESSURE. c. A star that has not yet finished forming is called a__PROTOSTAR_____. d. A forming star spins more rapidly as it collapses because of conservation of ANGULAR MOMENTUM. e. If a protostar has a mass too small for it to sustain nuclear fusion it becomes the type of object known as a____BROWN DWARF____
Calculate the intensity of current flowing through a computer that consumes 180W and operates at 120 V.
A.)0,66 A
B.)12600 A
C.)1,5 A
D.)60 A
Answer:
C) 1.5 A
Explanation:
P = IV
180 W = I (120 V)
I = 1.5 A
A narrow beam of light containing red (660 nm) and blue (470 nm) wavelengths travels from air through a 1.00 cm thick flat piece of crown glass and back to air again. The beam strikes at an incident angle of 30 degrees. (a) At what angles do the two colors emerge
Answer:
The color blue emerges at 19.16° and the color red emerges at 19.32°.
Explanation:
The angle at which the two colors emerge can be calculated using the Snell's Law:
[tex]n_{1}sin(\theta_{1}) = n_{2}sin(\theta_{2})[/tex]
Where:
n₁ is the refractive index of the incident medium (air) = 1.0003
n₂ is the refractive index of the refractive medium:
blue light in crown glass = 1.524
red light in crown glass = 1.512
θ₁ is the angle of the incident light = 30°
θ₂ is the angle of the refracted light
For the red wavelengths we have:
[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.0003*sin(30)}{1.512}) = 19.32 ^{\circ} [/tex]
For the blue wavelengths we have:
[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.0003*sin(30)}{1.524}) = 19.16 ^{\circ} [/tex]
Therefore, the color blue emerges at 19.16° and the color red emerges at 19.32°.
I hope it helps you!
Marco is conducting an experiment. He knows the wave that he is working with has a wavelength of 32.4 cm. If he measures the frequency as 3 hertz, which statement about the wave is accurate?
This question is incomplete; here is the complete question:
Marco is conducting an experiment. He knows the wave that he is working with has a wavelength of 32.4 cm. If he measures the frequency as 3 hertz, which statement about the wave is accurate?
A. The wave has traveled 32.4 cm in 3 seconds.
B. The wave has traveled 32.4 cm in 9 seconds.
C. The wave has traveled 97.2 cm in 3 seconds.
D. The wave has traveled 97.2 cm in 1 second.
The answer to this question is D. The wave has traveled 97.2 cm in 1 second.
Explanation:
The frequency of a wave, which is in this case 3 hertz, represents the number of waves that go through a point during 1 second. According to this, if the frequency of the wave is 3 hertz this means in 1 second there were 3 waves. Moreover, if you multiply the wavelength (32.4cm) by the frequency (3) you will know the distance the wave traveled in 1 second: 32.4 x 3 = 97.2 cm. This makes option D the correct one as the distance in 1 second was 97.2 cm.
Answer:Is D!
Explanation:TEAT(Sorry) -_-*
observe the virual skateboarder coming down the hill and over the ramp describe how each of newton’s laws of motion can be observed in this action you can choose the dry wet or muddy conditions or some combination of these
Answer:
first part the skater goes down a constant slope ramp, initially he has Newton's second law
pply Newton's third law, the normal is the reaction to the support of the body on the surface
the ramp shoots off. axis becomes zero and therefore with Newton's first law its speed
Explanation:
It is the description of this movement let's write Newton's laws.
* The first law that a body goes at constant speed or zero if the sum of the external forces is zero
* the second law is F = m a
* The third law states that the forces act in pairs of equal magnitude and opposite direction, one applied to each body.
Let's apply these laws to our case
In the first part the skater goes down a constant slope ramp, initially he has Newton's second law when he accelerates from the initial velocity of zero to a terminal velocity.
The expression for this is
Wₓ - fr = ma
W sin θ - μ W cos θ = m a
W = mg
g (sin θ - μ cos) = a
the value of the coefficient of kinetic friction depends on the condition of the surface, dry, wet or muddy
This is Newton's second law
On the Y axis, which is perpendicular to the ramp we have
N- [tex]W_{y}[/tex] = 0
If we apply Newton's third law, the normal is the reaction to the support of the body on the surface, note that it can be different from the weight.
In the second part when he is on the ramp.
In the ramp the skater enters with a speed v, suppose that the ramp has an incline so that the skater can jump, in this case the angle is positive with respect to the axis x
In this case the analysis is similar to the previous one
Newton's second law gives the acceleration of the skater, who when he reaches the end of the ramp shoots off.
At this point the force in the x (horizontal) axis becomes zero and therefore with Newton's first law its speed this axis remains constant and the force in the y axis is the force of gravity and has an acceleration that changes if velocity according to Newton's second law
Answer:look at explanations
Explanation:
Can someone please illustrate how the refracted ray will look like?
Answer
As the angle of incidence increases in Figure 2.8, a point is finally reached where the refracted ray does not emerge at the second layer but lie along the interface. This particular angle of incidence at which the angle of refraction is 90° and the refracted ray lies along the interface is known as the critical angle. At and beyond the critical angle, there is no transmitted ray and therefore a very high reflected ray will be recorded .
Therefore,
sinθisin90=Vp1Vp2
But, sin 90 = 1.
At critical angle,
sinθcritical=Vp1Vp2
A critical refracted wave travels along the interface between layers and is refracted back into the upper layer at the critical angle. The waves refracted back into the upper layer are called head waves or first-break refractions because at certain distances from a source, they are the first arriving energy. Recorded first-break refraction is shown in Figure 2.10.
Note that these first-break refractions can give us important information about the shallow velocities on land seismic data.
Note also that seismic data are acquired in such a way that reflections from horizons of interest are in the pre-critical region, even at the farthest offset in the data.
In reality, part of the seismic energy arriving at an interface is transmitted and refracted, and another part of the energy is reflected at that same interface. Given that there are many reflectors in the subsurface, there will be many paths from source to receiver, each of them with a different travel time. The proportion of energy reflected depends on the material properties of the two bounding layers and on the angle of incidence
lab safety test Safety goggles and an apron must be worn when handling chemicals labeled corrosive because they:________.
Answer: React with the skin
Explanation:
lab safety test Safety goggles and an apron must be worn when handling chemicals labeled corrosive because they React with the skin
A construction worker uses an electrical device to attract fallen nails and sharp objects
from a construction site. What is causing the attraction of the metal objects?
O An electrical wave oscillating perpendicular to the electrical device.
O An electrical charge radiating perpendicular to the wire
O Amagnetic wave radiating perpendicular to an electrical device
O A magnetic wave and electrical current moving in opposite directions
Answer:
is the last one, a magnetic wave and electrical current moving in opposite directions
Explanation:
opposite directions always attract in magnetic waves and fields
Describe the motion of water waves.
Answer:
Water waves are an example of waves that involve a combination of both longitudinal and transverse motions. As a wave travels through the waver, the particles travel in clockwise circles. The radius of the circles decreases as the depth into the water increases.
select the correct relationship of the densities of the given substances: !●water < iron < aluminium < mercury ● Iron < water < mercury < aluminium ● water < aluminium < iron < mercury ● none of the above. asap plz!!!
Answer:
option a is correct
Explanation:
water ∠iron∠aluminium∠mercury
water density =1.0000
iron =7.487
aluminium=2.07
mercury=13.59
The pH scale is used to tell if a substance
is an acid or base. Substances with a pH
of 7 are neutral. An acid is anything
below 7 and a base is anything above 7.
Bleach has a pH of about 12. What type of
substance is bleach?
A. base
B. acid
C. neutral
Answer: Bleach is a base
Explanation: If bleach had a pH level of 12, a number above 7, than it is a base. Hope this helps!
How to find average acceleration only using displacement and time?
Answer:
Average acceleration = Displacement / (time)^2
Explanation:
The unit for acceleration is
[tex]m {s}^{ - 2} [/tex]
Displacement = m
Time = s
Hence the units of displacement and time should be manipulated to get the unit of acceleration.
You can't. You can only find average velocity.
But if you also know that initial velocity is zero ... the object started from rest ... then
Avg acceleration =
2 x displacement / time-squared
A car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway. Which of the following statements most accurately describes the motion of the car? Choose 1 answer:(Choice A) A The average velocity is 40 miles per hour. (Choice B) B The total displacement of the trip is 300 miles. (Choice C) C The average speed is 37.5 miles per hour. (Choice D) D The car travels at 50 mph for the first half and 30 mph for the second half.
Answer: D
Explanation:
Given that a car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway.
From point A to B
The speed = distance / time
Where
Distance = 150 mile
Time = 3 hours
Substitute the values into the formula
Speed = 150/3 = 50 mile/ hours
From Point B to Point A
Distance = 150 miles
Time = 5 hours
Where speed = distance/ time
substitute all the parameters into the formula
Speed = 150/5 = 30 mph
Therefore, The car travels at 50 mph for the first half and 30 mph for the second half.
The correct answer is option D
A person holds a 25 kg (250 newton) bag of cement over his head and moves it a distance of 10 m, taking 2 minutes, while another person carries it on a wheelbarrow that same distance, taking 1 minute.Who does more work ? What is the power of each person?
Explanation:
Assuming the 10 m distance is the vertical displacement, the work done by both people is the same.
Work = force × distance
W = (250 N) (10 m)
W = 2500 J
The power of the first person is:
Power = work / time
P = 2500 J / 120 s
P = 20.83 W
The power of the second person is:
P = 2500 J / 60 s
P = 41.67 W
Question 5
Calculate the kinetic energy of a car (m - 800 kg) moving at 15 m/s. Write your answer to the nearest whole number in the blank space
provided. Only write the numerical value of the answer without units. Do not leave any space in between numbers.
Answer: Joules
Answer:
90,000Explanation:
[tex]m =800kg\\v = 15\\\\K.E = \frac{1}{2}mv^2\\ K.E= \frac{1}{2} \times 800\times 15^2\\= 400 \times 225\\= 90000 joules\\= 90 kilojoules[/tex]
If 60 L of a gas are at 4 atm and 27 C °, what pressure would it have if the volume is 40 L 127 C °?
Answer:
8 atm
Explanation:
Ideal gas law:
PV = nRT
where P is pressure, V is volume, n is moles, R is universal gas constant, and T is absolute temperature.
If n is constant:
PV / T = PV / T
(4 atm) (60 L) / (27 + 273) K = P (40 L) / (127 + 273) K
0.8 atm = 0.1 P
P = 8 atm
You and your family are going on a trip in Europe. Calculate the speed in the following scenario. State how you calculated your answer and include correct units. A car travels 240 kilometers in 3 hours; What is the speed of the car during that time?
Answer:
22.2 m/s or 80 km/h
Explanation:
Given that
Distance travelled by the car, d = 240 km
Time taken by the car, t = 3 hours.
Speed of the car, v = ? m/s
for easy calculations, we will be converting the units to meters and seconds respectively.
240 km to meters would be
240 * 1000 m = 240000 m
3 hrs to seconds would be
3 * 60 mins * 60 seconds = 10800 s
now, we have our distance and time to be
d = 240000 m
t = 10800 s
speed is defined as the ratio of distance with respect to time taken, effectively,
Speed = distance/time
speed, v= 240000 / 10800
v = 22.2 m/s
therefore, the speed of the car during the time is 22.2 m/s, or if the speed is needed in km/h, we can convert it
22.2 * 3600/1000 =
80 km/h
Self-Check
por Learning
A truck mass 8000 kg and a car a mass 1000
kg are travelling at the same velocity. Which one has greater kinetic energy ? Why?
Answer:
K.E of truck > K.E of car
Explanation:
Mass of the truck = 8000Kg
K.E=[tex]\frac{1}{2} mv[/tex]
K.E =[tex]\frac{1}{2}*8000*v\\ 4000v[/tex]
Mass of the car = 1000 Kg
K.E of the car =[tex]\frac{1}{2}*1000*v\\ 500v[/tex]
Therefore Kinetic energy of the truck is greater than that of the car
