can someone do this step by step

Answer:

80 m/s.

Explanation:

NOTE: This is a physics question. However, the solution to the question given below:

From the question given above, the following data were obtained:

Acceleration (a) = 2 m/s²

Initial velocity (u) = 20 m/s

Time (t) = 30 s

Final velocity (v) =?

The final velocity of the train can be obtained as shown below:

v = u + at

v = 20 + (2 × 30)

v = 20 + 60

v = 80 m/s

Therefore, the final velocity of train is 80 m/s.

Answer:

Cr(NO3)3 (aq) +K3PO4 (s)

Explanation:

Answer:

huh what?

Explanation:

Is  196,96657  u

I hope I've helped :)

Answer:

See explanation

Explanation:

A system is said to have attained dynamic equilibrium when the rate of forward reaction and the rate of reverse reaction are equal.

Considering the system under consideration;

I2(s)⇄I2(g)

Heating the container converts solid iodine to purple coloured iodine vapour.

At equilibrium, there will be no net change in the amount of solid iodine and iodine vapour present in the system because the two processes (forward and reverse reactions) occur at the same rate at equilibrium.

Answer:

Enter your numerical answer to 1 decimal place. Do not include the units of "g". Question: Question 14 1 pts Consider the following reaction, where A and E are hypothetical elements. A+3E --> AE The atomic mass of A is 42.1 amu. The atomic mass of Eis 56.2 amu. If 42.6 g of A fully reacts, how many grams of AE, are expected to form?

Answer:

39.02

Explanation:

From the question given above, the following data were obtained:

Isotope A:

Mass of A = 38

Abundance of A (A%) = 9.67%

Isotope B:

Mass of B = 39

Abundance of B (B%) = 78.68%

Isotope C:

Mass of C = 40

Abundance of C (C%) = 11.34%

Isotope D:

Mass of D = 41

Abundance of D (D%) = 0.31%

Average atomic mass of X =?

The average atomic mass of X can be obtained as follow:

Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]

= [(38 × 9.67)/100] + [(39 × 78.68)/100] + [(40 × 11.34)/100] + [(41 × 0.31)/100]

= 3.6746 + 30.6852 + 4.536 + 0.1271

= 30.02

Thus, the average atomic mass of X is 39.02

Answer:

SLS functions in cleaning product as a surfactant, wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. This ingredient contributes foaming properties to cleaning products. SLS is safe for use in cleaning products.

Sodium lauryl sulfate and ammonium lauryl sulfate are surfactants that help with the mixing of oil and water. As such, they can clean the skin and hair by helping water to mix with oil and dirt so that they can be rinsed away or suspend poorly soluble ingredients in water.

The U.S. Food and Drug Administration (FDA) includes sodium lauryl sulfate on its list of multipurpose additives allowed to be directly added to food. Sodium lauryl sulfate and ammonium lauryl sulfate are also approved indirect food additives. For example, both ingredients are permitted to be used as components of coatings.

The safety of sodium lauryl sulfate and ammonium lauryl sulfate has been assessed by the Cosmetic Ingredient Review  (CIR) Expert Panel on two separate occasions (1983 and 2002), concluding each time that the data showed these ingredients were safe in formulations designed for brief, discontinuous use, followed by thorough rinsing from the surface of the skin. In products intended for prolonged contact with skin, concentrations should not exceed 1%.  

Sodium lauryl sulfate and ammonium lauryl sulfate may be used in cosmetics and personal care products marketed in Europe according to the general provisions of the Cosmetics Regulation of the European Union.

Learn more about Sodium lauryl sulfate and ammonium lauryl sulfate

https://brainly.com/question/12149356

#SPJ2

Answer:

bakit Kay's lahat Ng module mahirap

Answer: The correct option is C ( is very hard and burns cleanly).

Explanation:

COAL is a form of rock that is made up of mostly carbon amongst other elements which includes sulphur, nitrogen, hydrogen and oxygen. There are different types of coal which include:

--> anthracite ( 90% carbon)

--> bituminous coal ( 70-90% carbon)

--> lignite ( 60- 70% carbon) and

--> peat (60 % carbon).

Anthracite is the type of coal that contains the highest carbon content ( 90% carbon). This makes it very hard and is often a times referred to as HARD COAL. Anthracite is a higher quality coal for domestic and open fire heating. This is because it contains less impurities than other type of coal and thereby making it to BURN CLEANLY avoiding atmospheric pollution.

Answer:

CH3—CH2—O—CH2—CH3 is the compound of glycol.

Answer:

HOH2C―CH2―CH2―CH2OH is glycol

Explanation:

Answer:

Molecular mass, M = 58.20 g/mol.

Explanation:

Given the following data;

Conversion:

760 mmHg = 1 atm

770 mmHg = 770/760 = 1.0131 atm

Temperature = 25°C = 273 + 25 = 298 K

To find the molecular mass, we would use the ideal gas law equation (density version);

PM = dRT

Where;

Making M the subject of formula, we have;

[tex] M = \frac {dRT}{P} [/tex]

Substituting into the formula, we have;

[tex] M = \frac {2.41 * 0.0821 * 298}{1.0131} [/tex]

[tex] M = \frac {58.9626}{1.0131} [/tex]

Molecular mass, M = 58.20 g/mol.

Answer:

in order of their atomic mass

The first periodic table created by Mendeleev was based on the atomic masses of elements. Later Mosely modified it based on the atomic number.

Periodic table is the classification of all the known  elements based on their atomic number. There are 118 elements in periodic table now. They are classified into different groups and periods.

Mendeleev was first to create periodic table for the easy classification of elements. He classified elements based on their atomic masses. At that time there were only 60-65 elements discovered.

Later Mosley modified it to modern periodic table based on the increasing order of atomic number of elements. Therefore, the first arrangement was based on atomic masses.

Find more on periodic table :

https://brainly.com/question/11155928

#SPJ2

Answer: The statement conjugate base of hydrofluoric acid is weaker than that of acetic acid is most likely true.

Explanation:

A strong acid upon dissociation gives a weak conjugate base. This can also be said as stronger is the acid, weaker will be its conjugate base or vice-versa.

Hydrofluoric acid is a strong base as it dissociates completely when dissolved in water.

For example, [tex]HF \rightleftharpoons H^{+} + F^{-}[/tex]

The conjugate base is [tex]F^{-}[/tex] which is a weak base.

Acetic acid is a weak acid as it dissociates partially when dissolved in water. So, the conjugate base of acetic acid is a strong base.

[tex]CH_{3}COOH \rightarrow CH_{3}COO^{-} + H^{+}[/tex]

Thus, we can conclude that the statement conjugate base of hydrofluoric acid is weaker than that of acetic acid is most likely true.

Answer:

0.723 moles (5 s.f.)

Explanation:

Whenever there is a chemical equation, ensure that it is balanced. This is because a balanced chemical equation tells us the mole ratio (not the ratio of their masses), which means the relationship of the number of moles of reactants or products with one another.

The chemical equation given has already been balanced. Looking at the coefficients of HBr and Ba(OH)₂, the mole ratio of HBr to Ba(OH)₂ is 2: 1.

• 1 mole of Ba(OH)₂ is needed to react with 2 mole of HBr

Find the number of moles of HBr present:

Number of moles= mass ÷mr

Amount of HBr

= 117 ÷(1 +79.9)

= 1.4462 moles (5 s.f.)

Since the amount of Ba(OH)₂ required is half the amount of HBr present,

amount of Ba(OH)₂ required

= 1.4462 ÷2

= 0.723 moles (3 s.f.)

Notes:

• mr

= relative molecular mass

= sum of relative atomic masses (which can be found in the periodic table) in a molecule

Answer:

a

Explanation:

Mixture is a combination of two or more elements and sodium is an element with a chemical symbol Na and a charge of +1 and chloride too is an element with a chemical symbol Cl and a charge of -1 so when these two elements are combine it form a chemical solution called Sodium chloride

Answer:

pCH₄ = 0.540 atm

pC₂H₆ = 0.405 atm

pC₃H₈ = 0.505 atm

Explanation:

Step 1: Calculate the total number of gaseous moles

n = n(CH₄) + n(C₂H₆) + n(C₃H₈)

n = 0.320 mol + 0.240 mol + 0.300 mol = 0.860 mol

Step 2: Calculate the partial pressure of each gas

We will use the following expression.

pi = P × Χi

where,

pCH₄ = 1.45 atm × 0.320 mol/0.860 mol = 0.540 atm

pC₂H₆ = 1.45 atm × 0.240 mol/0.860 mol = 0.405 atm

pC₃H₈ = 1.45 atm × 0.300 mol/0.860 mol = 0.505 atm

Answer:

electron configuration

Explanation:

The arrangement of electrons in the atomic orbitals of an atom is called the electron configuration. Electron configurations can be determined using a periodic table.

Answer:

0.512 M

Explanation:

We'll begin by calculating the number of mole in 12 g of C₂H₆O₄. This can be obtained as shown below:

Mass of C₂H₆O₄ = 12 g

Molar mass of C₂H₆O₄ = (2×12) + (6×1) + (4×16)

= 24 + 6 + 64

= 94 g/mol

Mole of C₂H₆O₄ =?

Mole = mass /molar mass

Mole of C₂H₆O₄ = 12 / 94

Mole of C₂H₆O₄ = 0.128 mole

Next, we shall convert 250 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

250 mL = 250 mL × 1 L / 1000 mL

250 mL = 0.25 L

Thus, 250 mL is equivalent to 0.25 L.

Finally, we shall determine the molarity of the solution. This can be obtained as follow:

Mole of C₂H₆O₄ = 0.128 mole

Volume = 0.25 L

Molarity =?

Molarity = mole /Volume

Molarity = 0.128 / 0.25

Molarity = 0.512 M

Thus, the molarity of the solution is 0.512 M

The question is as follows: How many oxygen molecules are produced by the decomposition of 28.5 g of H2O2 (molecular mass = 34.0g / mol) according to the equation

2H2O2 (l) → 2H2O (l) + O2 (g)

Answer: There are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].

Explanation:

Given: Mass of [tex]H_{2}O_{2}[/tex] = 28.5 g

As moles is the mass of a substance divided by its molar mass. Hence, moles of [tex]H_{2}O_{2}[/tex] is calculated as follow.

[tex]Moles = \frac{mass}{molarmass}\\= \frac{28.5 g}{34.0 g/mol}\\= 0.838 mol[/tex]

According to the given equation, 2 moles of [tex]H_{2}O_{2}[/tex] gives 1 mole of [tex]O_{2}[/tex]. So, moles of [tex]O_{2}[/tex] produced by 0.838 moles of [tex]H_{2}O_{2}[/tex]  will be calculated as follows.

[tex]Moles of O_{2} = \frac{0.838 mol}{2}\\= 0.419 mol[/tex]

This means that moles of [tex]O_{2}[/tex] produced is 0.419 mol.

As per the mole concept, 1 mole of every substance has [tex]6.022 \times 10^{23}[/tex] molecules.

So, molecules of [tex]O_{2}[/tex] present in 0.419 mole are as follows.

[tex]0.419 \times 6.022 \times 10^{23}\\= 2.52 \times 10^{23}[/tex]

Thus, we can conclude that there are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].

Answer:

O 100

Explanation:

Answer:

c

Explanation:

Nh4OH + HCL ---> NH4Cl + H3O

so ph decreases as H3O increases

and OH also decreases

When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.

NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.

This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.

In conclusion, option B is correct.

Find out more on Bases at https://brainly.com/question/15565260.

Answer:

all i can accurately say is that 2 and 4 are both true

The salt CaCl2 (calcium chloride) and water (H2O) are formed in this reaction. Also formed is the gas carbon dioxide (CO2) which may cause a bloated feeling in the stomach. The acid that is secreted in your stomach is approximately 0.1 M (moles per liter) hydrochloric acid.

I hope it helps ●~●

Answer:

thnx for the points too muchee

Explanation:

Answer:

Explanation:

[tex]{hope it helps}}[/tex]

Answer:

C thermal

Explanation:

Answer:

See explanation

Explanation:

In Bohr's theory, electrons are found in specific regions in space called orbits. These orbits are also called energy levels. An electron may move from one energy level to another by absorbing or emitting energy.

In the wave mechanical model, electrons are not found in a particular region in space according to Heisenberg's uncertainty principle.

We rather define a certain region in space where there is a high probability of locating the electron. This region in space where there is a high probability of locating the electron is called an orbital.

Hence, in the Bohr's model of the atom,electrons can surely be found in orbits while in the wave mechanical model, the orbital is a probability function that describes a region in space where an electron may be found.

Answer:

A. The red side is acidic.

B. Because it has more positive hydrogen ions.

C. The blue side is basic.

D. Because it has more negative hydroxide ion.

Given the data from the question,

A. The side with more H⁺ is acidic

B. It is acidic because it contains more H⁺

C. The side with more OH¯ is basic

B. It is basic because it contains more OH¯

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

The pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.

The scale ranges from 0 to 14 indicating:

The presence of H⁺ indicates acidity.

Thus, the side with more H⁺ is acidic.

The presence of OH¯ indicates the solution is basic.

Therefore, the side with more OH¯ is basic

Learn more about pH:

https://brainly.com/question/3709867

Answer:

bitter leaf soups

Explanation:

because it cures gems out our body system