Answer:
The answer is D
Explanation:
because insecticides are used for insects but pesticides are used to kill off unwanted plants
Answer:
B. herbicides
Explanation:
it kills weeds.
Percent yield is very important in terms of money. The higher the percent yield, the more of a product you can make. If you are working for a drug company and your theoretical yield is 120 kg, but you actually made 105 kg, what is your percent yield?
A. 8.75%
B. 114%
C. 87.50%
D. 15.00%
Answer:
87.5 %
Explanation:
Step 1: Given data
Theoretical yield: 120 kgReal yield: 105 kgStep 2: Calculate the percent yield
When working with chemical reactions, we can determine the efficience in obtaining a product measuring the percent yield. The theoretical yield is the maximum amount of product that we could obtain according to the stoichiometry, whereas the real yield is the amount of product that we actually obtain when we carry out the process. We can calculate the percent yield usign the following expression.
%yield = real yield / theoretical yield × 100%
%yield = 105 kg / 120 kg × 100%
%yield = 87.5 %
A sample of radioactive material starts with 80 grams. After 3 half-lives have passed, how much radioactive sample remains?
Answer:
After 3 half lives 10 g of radio active material left.
Explanation:
Given data:
Total amount of radio active material = 80 g
Amount left after 3 half lives = ?
Solution:
At time zero = 80 g
At first half life = 80 g/2 = 40 g
At 2nd half life = 40 g/2 = 20 g
At 3rd half life = 20 g/2 = 10 g
Thus, after 3 half lives 10 g of radio active material left.
someone please help me answer this i’m struggling and i will give branliest
Answer:
bottom right corner with arrows going up
which orbital has the highest energy level
Answer:
p orbitals
Explanation:
What happens after condensation to cause precipitation?
A
The sun heats water on the Earth's surface.
B
Water is absorbed into the ground.
C
Clouds fill with moisture and get too heavy.
D
Excess water runs downhill.
Answer:
The answer is c, Clouds fill with moisture and get too hravy
Protons and neutrons are similar because they both:
cause objects to become charged
are attracted to electrons
are found in the nucleus of an atom
have positive charges
Answer:
C. are found in the nucleus of an atom
Explanation:
Protons and Neutrons are always located at the center of the atom also called as the nuclei of the atom and constitute nearly all the mass of the atom, while the electrons revolve around them in orbits called shells. Only protons have a positive charge and electrons have negative charges, due to which only protons and electrons attract each other, while neutrons lack charges or have 'Neutral Charges'.
How many joules are required to melt 250 grams of water
Answer:
i not sure but i searched it up and it said Q=104525J
Explanation:
What is the average Mw for a fatty acid mixture whose fats (1 gram) required 0.0034 equivalents of NaOH to titrate. Remember: 1 Fatty acid has 1 equivalent.
1. Ew = Mw (#H+)
2. Ew = mass/eq
a.) 294.12 g/mol
b.) 145.04 g/mol
c.) 345.56 g/mol
d.) 132.04 g/mol
Answer:
a.) 294.12 g/mol
Explanation:
1 equivalent of fatty acid reacts with 1 equivalent of NaOH.
As in the titration are required 0.0034 equivalents of NaOH, the equivalents of fatty acids = moles of fatty acids are:
0.0034 moles of fatty acids
Molar mass is defined as the ratio between mass of substance in a determined amount of moles. The mass of the fats was 1 gram, that means the molar mass is:
1g / 0.0034moles =
294.12g/mol
Right option is:
a.) 294.12 g/molWrite the formula for diphosphorous pentoxide
Answer:
P4O10
Explanation:
What term is used when heat is transferred from one piece of matter to another until they are of equal temperature?
thermal contact
When heat flows from one object or substance to another it is in contact with, the objects or substances are said to be in thermal contact. The state where objects in thermal contact with each other reach the same temperature, no heat flows between them.
A metal ion uses d2sp3 orbitals when forming a complex. What is its coordination number and the shape of the complex?
Answer:
Octahedral
Explanation:
The idea of hybridization is a valence bond concept introduced by Linus Pauling and soon became an important explanation for the structure of molecules even in coordination chemistry.
Hybridization involves the mixing of orbitals of appropriate energy to form a new set of orbitals that are more suitable for bonding with ligands.
When one s, two d and three p orbitals are hybridized in complex formation, octahedral complexes are formed.
What is the electron configuration for N (nitrogen)?
A. 1s22s23s23p1
B. 1s21p5
C. 1s22s22p3
D. 1s22s22p23s1
Explanation:
₇N = 1s² 2s² 2p³
Group = 15period = 2atomic mass = 14Hydride of Nitrogen = Ammoniavalency = 3Therefore,
Option C is correct ✔
What is magnetism?
O a property of all rocks
O a property of all metals
O the force of attraction or
repulsion of magnetic materials
O a force that depends on mass and distance
Explanation:
I think it's the third one but I'm not sure
Answer:
The Answer for this is C
The Earth and the spaceship both have mass. The astronaut is attracted to Earth by gravity, but he is not attracted to the spaceship. Explain.
What mass (in grams) of silver contains the same number of atoms as 5.59 grams of sulfur?
Answer:
18.84 g of silver.
Explanation:
We'll begin by calculating the number atoms present in 5.59 g of sulphur. This can be obtained as follow:
From Avogadro's hypothesis,
1 mole of sulphur contains 6.02×10²³ atoms.
1 mole of sulphur = 32 g
Thus,
32 g of sulphur contains 6.02×10²³ atoms.
Therefore, 5.59 g of sulphur will contain = (5.59 × 6.02×10²³) / 32 = 1.05×10²³ atoms.
From the calculations made above, 5.59 g of sulphur contains 1.05×10²³ atoms.
Finally, we shall determine the mass of silver that contains 1.05×10²³ atoms.
This is illustrated below:
1 mole of silver = 6.02×10²³ atoms.
1 mole of silver = 108 g
108 g of silver contains 6.02×10²³ atoms.
Therefore, Xg of silver will contain 1.05×10²³ atoms i.e
Xg of silver = (108 × 1.05×10²³)/6.02×10²³
Xg of silver = 18.84 g
Thus, 18.84 g of silver contains the same number of atoms (i.e 1.05×10²³ atoms) as 5.59 g of sulfur
A solution has a pH of 11.75. Calculate the [H:0*] of the solution
The [H₃0⁺] of the solution : 1.778 x 10⁻¹² M
Further explanationpH is the degree of acidity of a solution that depends on the concentration of H⁺ ions. The greater the value the more acidic the solution and the smaller the pH.
pH = - log [H⁺]
So that the two quantities between pH and [H⁺] are inversely proportional because they are associated with negative values.
A solution whose value is different by n has a difference in the concentration of H⁺ ion of 10ⁿ.
pH of solution = 11.75
the [H₃0⁺] of the solution :
[tex]\tt pH=-log[H_3O^+]\\\\11.75=-log[H_3O^+]\\\\(H_3O^+]=10^{-11.75}=1.778\times 10^{-12}[/tex]
. If you have 4.65 moles of H2 gas from: 2H2 + O2 → 2H2O
a. How much Oxygen is needed to completely react with hydrogen?
O2? =
b. How many moles of water will be produced?
H2O? =
At what velocity (m/s) must a 19.9 g object be moving in order to possess a kinetic energy of 1.0 J
Answer:
Explanation:
T
Answer:
for this one you would have to divide 19.9g by the kinetic energy 1.0 and you would get your answer.
Explanation:if you would give me brainiest that would help a lot :)
A gas sample occupies 4.39 L at 44 ºC. What will be the new volume, using Charles’ Law, if the temperature decreases to 25 ºC?
Hi there! :)
[tex]\large\boxed{x = 2.49 L}[/tex]
Use the proportion for Charles' Law where:
[tex]\frac{v_{1}}{t_{1}}= \frac{v_{2}}{t_{2}}[/tex]
v1 = initial volume
t1 = initial temperature
v2 = final volume
v2 = final temperature
Substitute in the given values into the proportion:
v1 = 4.39 L
t1 = 44° C
t2 = 25°C
v2 = x L
Set up the proportion:
[tex]\frac{4.39}{44} = \frac{x}{25}[/tex]
Cross multiply:
[tex]25 * 4.39 = 44x\\\\109.75 = 44x\\\\x = 2.49 L[/tex]
Answer:
The new volume will be approximately 2.49 L.
Explanation:
We are given that a gas sample occupies 4.39 L at 44° C.
We are also given that we are going decrease the temperature to 25° C.
Charles' Law has a formula which shows the relationship between the volumes of a samples and the temperatures of the samples.
The proportion is shown as:
[tex]\displaystyle \bullet \ \ \ \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex],
where V₁ and V₂ are the initial and final volume respectively and T₁ and T₂ are the initial and final temperature respectively.
This proportion can be used to determine what our unknown is. We need to know the final volume.
[tex]\displaystyle \frac{4.39 \ \text{L}}{44 \ \text{C}} = \frac{\text{x}}{25 \ \text{C}}\\\\\\\frac{4.39}{44} = \frac{x}{25}\\\\\\4.39 \times 25 = 44 \times x\\\\\\44x = 109.75\\\\\\\frac{44x}{44}=\frac{109.75}{44}\\\\\\x = 2.49432 \approx \boxed{2.49 \ \text{L}}[/tex]
Therefore, if we reduce the temperature to 25 °C, we will be reducing the volume of the substance to 2.49 L.
What is the name of the tides when the moon
is in 1st and 3rd quarter?
THE OH BOND IN WATER IS POLAR BECAUSE
Answer: In the case of water, we know that the O-H covalent bond is polar, due to the different electronegativities of hydrogen and oxygen. Since there are two O-H bonds in water, their bond dipoles will interact and may result in a molecular dipole which can be measured.
Explanation:
what is the molarity of a solution made by adding 0.720 mole of NaOH to 2.40 liters of water
Answer:
Molarity = 0.3 M
Explanation:
Given data:
Moles of NaOH = 0.720 mol
Volume of water = 2.40 L
Molarity = ?
Solution:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Molarity = 0.720 mol / 2.40 L
Molarity = 0.3 mol/L
Molarity = 0.3 M
9. If purple flowers are dominant to white flowers and
two white flowered plants are crossed, what
percentage of their offspring will be white
flowered?
What is question?
1 carbon atom mixed with 1 oxygen atom what is the formula
Answer:
carbon mono oxide CO
Explanation:
as both are in 1:1 ratio so CO is formed
Pls help plssssssdsss
Answer:
i do k12 too!
Explanation:
lol
#1...TRUE/FALSE, the best way to write a conclusion is to use the RERUN method.?
#2...TRUE/FALSE, an example of an inference is “I saw it rain today.”?
#3...TRUE/FALSE, an example of a quantitative observation is “That is a red doll.”?
#4...TRUE/FALSE, a scientific hypothesis is written as “If [independent variable] Then [dependent variable.]”?
please answer all of them
Cl2 +
NaBr
-
NaCl +
Br2
Answer:
hope this helps :)
Explanation:
Cl2 + NaBr = NaCl + Br2
NaCl + Br2 = NaBr + Cl2
A sample of an unknown compound is vaporized at 150.°C . The gas produced has a volume of 960.mL at a pressure of 1.00atm , and it weighs 0.941g . Assuming the gas behaves as an ideal gas under these conditions, calculate the molar mass of the compound. Round your answer to 3 significant digits.
Answer:
the molar mass of the compound is 34.0 g /mol
Explanation:
The computation of the molar mass of the compound is as follows:
As we know that
PV = nRT
n = mass ÷ MW
PV = mRT ÷ MW
It can be rearrange as
MW = mRT ÷ (PV)
MW = (0.941)(0.082)(150 + 273) ÷ (1 × 0.96)
= 33.99g/mol
= 34.0 g /mol
Hence, the molar mass of the compound is 34.0 g /mol
Part A: You are given a beaker containing a solution of an enzyme that hydrolyzes adenosine triphosphate (ATP) while it generates a lot of heat. You add a substantial amount of the sodium salt of ATP, and you measure the temperature of the beaker, and determine that nothing is happening. The enzyme is not performing the reaction. What is a reasonable chemical to add to the solution to get the enzyme to proceed with the hydrolysis of adenosine triphosphate?
Sulfur oxide,
Iron chloride,
magnesium chloride,
or add more sodium ATP.
Part B: You are investigating the reduction of oxygen that is performed by cytochrome c oxidase. As you start the reaction in a slightly acidic aqueous buffer with 2 mM Cu2SO4 and bubbling oxygen into the buffer. As the reaction proceeds, the solution slowly turns blue, what is happening?
a) Ozone is formed. This causes the solution to turn blue.
b) The copper is getting oxidized from Cu+ to Cu2+ and turns blue.
c) The cytochrome c oxidase protein is decomposing down to a blue product.
d) The pH of the solution is changing. Cu2SO4 is a pH indicator that turns blue when a solution becomes basic.
Part C: In the previous reaction, if you add a small amount of cyanide before adding the
Cu2SO4, the solution does not turn blue. What is a reasonable explanation?
a) The cyanide ion displaces the copper ions in the cytochrome c oxidase and stops the redox reaction.
b) The cyanide ion keeps the pH of the solution high. So the Cu2SO4 pH indicator does not show the decrease in pH.
c) The cyanide ion prevents the formation of ozone.
Answer:
1) magnesium chloride
2) b) The copper is getting oxidized from Cu+ to Cu2+ and turns blue.
Explanation:
The work published by David N. Frick, Sukalyani Banik, and Ryan S. Rypma in J Mol Biol. 2007 Jan 26; 365(4): 1017–1032 clearly shows that divalent metal ions of group 2 such as Mg^2+ play an important role in ATP hydrolysis. Addition of EDTA decreased the rate of hydrolysis of ATP (due to sequestration of the divalent ion of group 2) indicating an active participation of divalent ions in the process.
2) The copper I ion is colourless because it is a d^10 specie. However, when it is oxidized to Cu^2+, a blue colour appears in the solution.
Work shown would be appreciated ❤️
20 points!!!!
Answer:
35.453 amu.
Explanation:
From the question given above, the following data were obtained:
Isotope A (Cl–35):
Abundance (A%) = 75.77%
Mass of A = 34.969 amu
Isotope B (Cl–37):
Abundance (B%) = 24.23%
Mass of B = 36.966 amu
AVERAGE atomic mass of Cl =?
The average atomic mass of Cl can be obtained as follow:
Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100]
Average = [(34.969 × 75.77)/100] + [(36.966 × 24.23)/100]
Average = 26.496 + 8.957
Average atomic mass of Cl = 35.453 amu.
