Compound X has the same molecular formula as butane but has a different boiling point and melting point. What can be concluded about Compound X?


A It is a four-carbon alkene or alkyne.

B It is an optical isomer of butane.

C It is a geometric isomer of butane.

D It is a structural isomer of butane.
need this for gradpoint:)

Answer:

Changes of state occur at segment

✔ B–C

and segment

✔ D–E

Explanation:

got it right on edge :)

The amount of energy added to the ice between Point A and Point D is approximately 25 kJ.

To calculate the amount of energy added to the ice between Point A and Point D, we need to consider the different stages of the heating curve.

Heating the ice from -20°C to 0°C:

The energy required to raise the temperature of the ice can be calculated using the specific heat of ice (2.10 J/(g·°C)) and the mass of the ice (60.0 g). The temperature change is from -20°C to 0°C, which is a total of 20 degrees.

Energy = mass × specific heat × temperature change

Energy = 60.0 g × 2.10 J/(g·°C) × 20°C

Energy = 2520 J

Melting the ice at 0°C:

The energy required to melt the ice can be calculated using the latent heat of fusion of ice (333.4 J/g) and the mass of the ice (60.0 g).

Energy = mass × latent heat of fusion

Energy = 60.0 g × 333.4 J/g

Energy = 20,004 J

Heating the water from 0°C to 15°C:

The energy required to raise the temperature of the water can be calculated using the specific heat of water (4.18 J/(g·°C)) and the mass of the water (60.0 g). The temperature change is from 0°C to 15°C, which is a total of 15 degrees.

Energy = mass × specific heat × temperature change

Energy = 60.0 g × 4.18 J/(g·°C) × 15°C

Energy = 3753 J

The total energy added to the ice between Point A and Point D is the sum of the energy calculated in each step:

Total Energy = Energy (Heating ice) + Energy (Melting ice) + Energy (Heating water)

Total Energy = 2520 J + 20,004 J + 3753 J

Total Energy = 25,277 J

Converting this energy to kilojoules (kJ):

Total Energy = 25,277 J ÷ 1000

Total Energy = 25.277 kJ

Therefore, the amount of energy added to the ice between Point A and Point D is approximately 25 kJ.

To know more about energy

https://brainly.com/question/1932868

#SPJ2

Answer:

The molar concentration of the H₂SO₄ solution is 0.28 M

Explanation:

Molar concentration = number of moles / volume in litres

Number of moles = molar concentration × volume

From the equation of reaction, molar ratio of acid to base = 1 : 2

Using the formula; Na/Nb = CaVa/CbVb

Where Na is the number of moles of acid; Nb = number of moles of base; Ca = concentration of acid; Va = volume of acid; Cb = concentration of base; Vb = volume of base; Na/Nb = mole ratio of acid to base

Substituting the given values in the equation:

1/2 = Ca × 25.18 / 0.93 × 14.92

Ca = 0.93 × 14.92/ 25.18 × 2

Ca = 0.28M

Therefore, the molar concentration of the H₂SO₄ solution is 0.28 M

Answer:

what do you need help with

Answer:

1.17 L of H₂

Explanation:

We'll begin by calculating the number of mole in 2.3 g of Mg. This can be obtained as follow:

Mass of Mg = 2.3 g

Molar mass of Mg = 24 g/mol

Mole of Mg =?

Mole = mass /molar mass

Mole of Mg = 2.3 / 24

Mole of Mg = 0.096 mole

Next, we shall determine the number of mole of H₂ produced by the reaction of 2.3 g (i.e 0.096 mole) of Mg. This can be obtained as follow:

Mg + 2HCl —> MgCl₂ + H₂

From the balanced equation above,

1 mole of Mg reacted to 1 mole of H₂.

Therefore, 0.096 mole of Mg will also react to produce 0.096 mole of H₂.

Finally, we shall determine volume of H₂ produced from the reaction. This can be obtained as follow:

Number of mole (n) of H₂ = 0.096 mole

Pressure (P) = 2 atm

Temperature (T) = 298 K

Gas constant (R) = 0.0821 atm.L/Kmol

Volume (V) of H₂ =?

PV = nRT

2 × V = 0.096 × 0.0821 × 298

Divide both side by 2

V = (0.096 × 0.0821 × 298) /2

V = 1.17 L

Therefore, 1.17 L of H₂ were obtained from the reaction.

Answer:

I used a,b c, d in the equation as substituted coefficients to find the unknown for each element of P, Na, O, H, and I got

P4(s) + 4NaOH(aq) + 2H20(l)---->2Ph3 +2Na2HPO3(aq).

which I think should be the answer.

Answer: The correct option is ALL OF THE ABOVE.

Explanation:

TITRATION is a type of volumetric analysis which is used for determining the concentration of solutions. In this process a specific volume of a solution is placed in a conical flask by means of a pipette and small quantities of a second solution is slowly added from a burette until the end point is reached. This is determined by a means of an indicator which shows a characteristic colour change.

During titration, the following precautions should be followed to avoid errors and maintain standardisation in the experiment.

--> Any air bubble in the burette and pipette must be removed during measurement

--> the burette tap should be tightened to avoid leakage.

--> Remove the funnel from the burette before taking any reading to avoid errors in reading the volume.

--> use the base solution such as Sodium Hydroxide Solution to rinse the burette after washing with soap and tap water:

• to remove any air bubble and fill it's tip

• to remove any residual liquid from the water and soap solution which may interfere with the results of the experiment.

• to check if the burette is in good condition.

Therefore all of the above options to the question are correct.

Answer:

0.0900 mol/L

Explanation:

A chemist makes 330. mL of nickel(II) chloride working solution by adding distilled water to 220. mL of a 0.135 mol/L stock solution of nickel(II) chloride in water. Calculate the concentration of the chemist's working solution. Round your answer to significant digits.

Step 1: Given data

Step 2: Calculate the concentration of the final solution

We prepare a dilute solution from a concentrated one. We can calculate the concentration of the working solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁/V₂

C₂ = 0.135 mol/L × 220. mL/330. mL = 0.0900 mol/L

Answer:

The compound which doesn't contains ionic character is HC, H-atom and CL- atom shares 1 electron a to form covalent bond....

Answer:

Explanation:

BrCl₃ is an interhalogen compound with a hybridization of sp³d. The approximate bond angles can be predicted from the structure (attached below). Although, the lewis structure might be predicted to be trigonal bipyramidal from the structure, it is however a T-shaped geometry because of it's two lone pairs.

Also, from the structure attached, it can be predicted that the approximate bond angles about the central atom is 120° (360 ÷ 3) since each of the three chlorine atoms is equally spaced about the central atom.

The Lewis structure for BrCl₃ is attached to the image below. The bond angles around the central atom, bromine (Br), are 90 degrees between the bromine and each chlorine atom. Therefore, option B is correct.

A Lewis structure, also known as an electron-dot structure or Lewis dot structure is a diagram that represents the valence electrons of an atom or molecule.

Bromine (Br) is in Group 7A and has 7 valence electrons, while each chlorine (Cl) atom in Group 7A also has 7 valence electrons.

Br: 1 atom × 7 valence electrons = 7 valence electrons

Cl: 3 atoms × 7 valence electrons = 21 valence electrons

Total valence electrons = 7 + 21 = 28

To learn more about the bond angle, follow the link:

https://brainly.com/question/31324226

#SPJ6

Answer:

Nitrate NO3

here's your answer, hope it helps you

Answer:

highest boiling point.

Explanation:

Hello there!

In this case, according to the given information, it turns out necessary for us to recall the definition of colligative properties, more specifically that of boiling point elevation, defined in terms of the temperature change, van't Hoff's factor, molality of the solution and boiling point elevation constant:

[tex]\Delta T_b=i*m*K_b[/tex]

In such a way, since all the given solutions have the same molality and solvent (water), they all have the same m and Kb, for which we focus on the van't Hoff's factor which is 1 for CH2O (nonionizing), 2 for NaCl (Na and Cl ions are released), 2 for HF (H and F ions are released) and 3 for AlCl₃ (one Al and three Cl ions are released).

Therefore, since D. 0.50 mol AICI, in 1.0 kg water  has the greatest van't Hoff's factor, we infer it has the highest boiling point.

Regards!

Answer:

The halogen is Iodine.

Explanation:

Using the ideal gas equation, we find the number of moles of gas present, n.

PV = nRT where P = pressure of gas = 1.41 atm, V = volume of gas = 109 mL = 0.109 L, n = number of moles of gas, R = molar gas constant = 0.082 L-atm/mol-K and T = temperature of gas = 398 K

Since PV = nRT, making n subject of the formula, we have

n = PV/RT

substituting the values of the variables into the equation, we have

n = 1.41 atm × 0.109 L/(0.082 L-atm/mol-K × 398 K)

n = 0.15369 atm-L/32.636 L-atm/mol

n = 0.0047 mol

Since n = m/M where m = mass of gas = 1.19 g and M = relative molecular mass of gas

So, M = m/n

M = 1.19 g/0.0047 mol

M = 252.7 g

Since halogens are diatomic the relative atomic mass is M/2 = 252.7g/2 = 126.34 g

From tables, the only halogen with this atomic mass is Iodine.

So, the halogen is Iodine.

Answer:

3.11 mol/kg

Explanation:

Molality M = number of moles of solute, n/mass of solvent, m

To calculate the number of moles of glycerol (C₃H₈O₃) in 22.75 g of glycerol, we find its molar (molecular) mass, M',

So, M' = 3 × atomic mass of carbon + 8 × atomic mass hydrogen + 3 × atomic mass of oxygen

= 3 × 12 g/mol + 8 × 1 g/mol + 3 × 16 g/mol = 36 g/mol + 8 g/mol + 48 g/mol = 92 g/mol.

So, number of moles of glycerol, n = m'/M' where m' = mass of glycerol = 22.75 g and M' = molecular mass of glycerol = 92 g/mol

So, n = m'/M'

n = 22.75 g/92 g/mol

n = 0.247 mol

So, the molality of the solution M = n/m

Since m = mass of ethanol = 79.6 g = 0.0796 kg, substituting the value of n into the equation, we have

M = 0.247 mol/0.0796 kg

M = 3.11 mol/kg

So, the molality of the solution is 3.11 mol/kg.

Answer:

methylcyclohexane does not possess a chiral center

Explanation:

A molecule is said to possess a chiral center if one or more of the atoms in the molecule is bonded to four different atoms or groups.

If we look at methylcyclohexane, none of the carbon atoms in the molecule is bonded to four different atoms or groups hence the molecule contains no chiral centers and will not exhibit optical isomerism.

So, methylcyclohexane has a plane of symmetry thus it is an achiral molecule.

Answer:

4 and 6

Explanation:

Period 4 has 18 elements and so does period 6.

Answer:

The answer is basic

Explanation:

Choose letter b or basic. You welcome.

The strong acid and strong base has high rate constant of dissociation. The rate constant for weak acid and base for the dissociation is low, they do not easily dissociate in water. Therefore option B is the correct option.

Acid is a solution which releases H⁺ hydrogen ion when dissolved in water. Base releases hydroxide ion OH⁻ ion when dissolved in water.

pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. Strength of acidic nature is directly proportional to the concentration of hydronium ion.

On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. Temperature affect the pH. At room temperature pH scale is between 0 to 14. 7 is the pH of neutral solution. A solution of the ionic salt NaF is basic in nature.

Therefore, option B is the correct option.

To know more about acid and bases, here:

https://brainly.com/question/27228111

#SPJ2

Answer:

Rank the following chemical species from lowest absolute entropy (So) (1) to highest absolute entropy (5) at 298 K?

a. Al (s)

b. H2O (l)

c. HCN (g)

d. CH3COOH (l)

e. C2H6 (g)

Explanation:

Entropy is the measure of the degree of disorderness.

In solids, the entropy is very less compared to liquids and gases.

The entropy order is:

solids<liquids<gases

Among the given substances, water in liquid form has a strong intermolecular H-bond.

So, it has also less entropy.

Next acetic acid.

Between the gases, HCN, and ethane, ethane has more entropy due to very weak intermolecular interactions.

HCN has slight H-bonding in IT.

Hence, the entropy order is:

Al(s) < CH3COOH (l) <H2O(l) < HCN(g) < C2H6(g)

Answer:

This would make the reaction more energetically favourable

Explanation:

Fatty acid synthesis starts with the carboxylation of acetyl CoA to malonyl CoA. This irreversible reaction is the committed step in fatty acid synthesis. The synthesis of malonyl CoA is catalyzed by acetyl CoA carboxylase, which contains a biotin prosthetic group.

Answer:

Theoretical yield is 138.4 g

Explanation:

In the first step we determine the reaction:

3Mg + N₂ → Mg₃N₂

Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:

100 g . 1mol/ 24.3g = 4.11 moles of Mg.

Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride

Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂

We convert mass to moles, to find the theoretical yield:

1.37 mol . 100.9 g/mol = 138.2 g

Answer:

The most important difference between the two is that butter is derived from dairy and is rich in saturated fats, whereas margarine is made from plant oils. ... If the margarine contains partially hydrogenated oils, it will contain trans fat, even if the label claims that it has 0 g.

Explanation:

(⌒_⌒;)

Answer:

6.023*10^23........ .......

Answer:

Explanation:

Sample Response: If global warming continues, corals will continue to expel the algae from their cells to avoid poisonous buildup. This will cause corals to die. Without corals, the algae are not protected and cannot perform photosynthesis. This will cause the algae to die as well.

Answer:

3KOH(aq) + FeCl3(aq) --------> Fe(OH)3 + 3KCl

Explanation:

The rule for balancing chemical equations is that the number of atoms of each element must be the same on both sides of the reaction equation.

Hence, the two reactants are potassium hydroxide and aqueous iron(III) chloride.

The balanced molecular reaction equation is;

3KOH(aq) + FeCl3(aq) --------> Fe(OH)3 + 3KCl

Answer:

A hydrometer is a special device used to determine the density of liquids.

Explanation:

I hope this helps you. Have a nice day!