CompuGlobal is an American firm producing computers. CompuGlobal imports computer components from Taiwan and assembles them domestically. Suppose that in the United States, a computer sells for $800 and that 60% of the computer’s value comes from the value of the imported components. The United States imposes a 50% tariff on computers and a 10% tariff on the computer’s components. Assume that costs of producing components are the same in the United States and Taiwan and that transit costs are nonexistent. Based on the information provided, the effective rate of protection that CompuGlobal receives from the tariff is

Answers

Answer 1

Answer: 110%

Explanation:

The effective rate of protection is used in measuring the final tariff in a particular sector and it's expressed as:

g = (t -ai,ti) / (1 - ai)

where,

g = effective protection rate

ai = nominal tariff rate = 0.6

t = cost of intermediate input = 0.5

ti = nominal tariff on intermediate input = 0.1

The computer price here is $800 while the input price is 60% of $800 which will be:

= 60% × $800 = $480

nominal tariff rate = 480/800 = 0.6

Nominal tariff on final goods, t = 50% = 0.5

Tariff on imported input, ti = 10% = 0.1

Using the formula:

g = (t -ai,ti) / (1 - ai)

g = [0.5 - (0.6×0.1)] / (1 - 0.6)

g = (0.5 - 0.06) / 0.4

g = 0.44/.0.4

g = 1.10

g = 110%

The effective rate of protection is 110%


Related Questions

Read the argument below and determine the underlying principle that was used to come to the conclusion presented: A free college education for every citizen is important because it helps the United States create the best-educated workforce in the world. European countries like Germany are able to provide a free college education to their citizens, and the United States should as well. Which other argument uses the same underlying principle as the argument above?

a. Children should get free dental care, even if they drink a lot of soda which causes cavities.
b. Children should get free dental care because it will help prevent more serious issues later on and reduces future healthcare costs.
c. Every child should get free dental care, even if they can afford to pay for it.

Answers

Answer:

1. The underlying principle is

to create the best-educated workforce in the world.

2. The argument that uses the same underlying principle as the argument  1 above is:

b. Children should get free dental care because it will help prevent more serious issues later on and reduces future healthcare costs.

Explanation:

The underlying principle is a general rule which can be applied to different situations.  It shows the reason for doing something or embarking on a program.  For example, to offer free college education for every U.S. citizen, the underlying principle is to "create the best-educated workforce in the world."

Milltown Company specializes in selling used cars. During the month, the dealership sold 32 cars at an average price of $16,000 each. The budget for the month was to sell 30 cars at an average price of $17,000. Compute the dealership's sales price variance for the month.

Answers

Answer:

-$32,000

Explanation:

The sales price variance is a measure used determine the difference between an entity's expected price of a product or service and its actual sales price. It may be favorable or unfavourable to the company and may be calculated as

Sales price variance =  Actual quantity sold * (actual selling price - budgeted selling price)

Hence given that  the dealership sold 32 cars at an average price of $16,000 each while the budget was to sell 30 cars at an average price of $17,000,

Sales price variance = 32 ($16,000 - $17,000)

= -$32,000

The minus indicates unfavourable sales price variance

define accounting ?

Answers

Answer:

Accounting is the process of recording financial transactions pertaining to a business. The accounting process includes summarizing, analyzing and reporting these transactions to oversight agencies, regulators and tax collection entities.

Answer:

the action or process of keeping financial accounts.

Explanation:

A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product are:

Answers

Answer:

1. The correct option is C. 54.

2. The correct option is E. 60.

3. The correct option is A. 3.

4. The correct option is E. 90%.

5. The correct option is E. y.

Explanation:

Note: This question is not complete. The complete question is therefore provided before answering the question as follows:

A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product:

Task           Time (sec)            Immediate Predecessor

u                      30                                   none

v                      30                                    u

w                      6                                      u

x                       12                                    w

y                      54                                     x

z                      30                                    v, y

1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?

A. 162

B. 72

C. 54

D. 12

E. 60

2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?

A. 162

B. 72

C. 54

D. 12

E. 60

3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?

A. 3

B. 4

C. 5

D. 6

E. 7

4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?

A. 100%

B. 92.5%

C. 75%

D. 87.5%

E. 90%

5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?

A. u

B. v

C. w

D. x

E. y

The explanation of the answers is now provided as follows:

1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?

The minimum cycle time is equal to the maximum task time. From the data in the question, it can be seen that the maximum task time is 54. Therefore, the correct option is C. 54. That is, the minimum possible cycle time (in seconds) for this situation is 54.

2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?

Desired cycle time (in seconds) = Demand rate / Number of hours per days = 480 / 8 = 60

Therefore, the correct option is E. 60.

3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?

Total task time = 30 + 30 + 6 + 12 + 54 + 30 = 162

Minimum possible cycle time = 54

Therefore, we have:

Minimum number of workstations needed = Total task time / Minimum possible cycle time = 162 / 54 = 3

Therefore, the correct option is A. 3.

4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?

Line efficiency = Total task time / (Minimum number of workstations needed * Desired cycle time) = 162 / (3 * 60) = 162 / 180 = 0.90, or 90%

Therefore, the correct option is E. 90%.

5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?

The last task should be the one has the longest task time. From the data table in the question, it can be observed that y is the task that has the longest task time. This implies y is the task to perform last.

Therefore, the correct option is E. y.

vai trò của đạo đức trong doanh nghiệp là gì

Answers

Explanation:

Đạo đức kinh doanh giúp doanh nghiệp duy trì mối quan hệ tốt hơn và hài hòa với xã hội, khách hàng, nhân viên và các ngành hữu quan. ... Đạo đức kinh doanh có một vai trò quan trọng trong việc nâng cao lợi nhuận và năng suất của doanh nghiệp và cải thiện thiện chí của doanh nghiệp trên thị trường.  

đánh dấu tôi là não nhất làm ơn giúp tôi và cảm ơn

In addition to the date of recordation, what other factor is used to determine lien priority?

Answers

Answer:

Two factors primarily determine lien priority. Firstly the lien's categorization as superior or junior, and secondly the date the lien was recorded.

Explanation:

An encumbrance is most broadly defined as

another's right to use a property without the permission of the property owner.

another's right to claim the sale proceeds of a property that has been used as collateral for a loan.

another's interest in a real property that limits the interests of the freehold property owner.

another's right to control how the freehold owner of a real property uses the property.

In addition to the date of recordation, lien's categorization is other factor used to determine lien priority.

What is lien priority?

Lien priority helps to know the order in which creditors get paid following a foreclosure.

Date of recordation is one of the factor yo consider because those on the earlier dates are attended to first.

Therefore, lien priority is so base on categorization because Superiors are been attended to first.

Learn more about lien priority at;

https://brainly.com/question/24858866

In the small country of Economerica, there are 6 thousand people employed, 1 thousand people unemployed, and 3 thousand people of working age not included in the labor force. One thousand students graduate from the university and seek jobs in the country, but not one graduate is able to find one. Half of the new graduates believe there is no chance of finding a job and return home to live with their parents. Ceteris Paribus, what would the new unemployment rate be in Economerica?
A. 14.29%
B. 20.00%
C. 25.00%
D. 45.45%

Answers

Answer: B. 20.00%

Explanation:

Unemployment rate does not include those who have given up on finding a job.

Unemployment rate = Unemployed people / Labor force

Unemployed people:

= Original unemployed + half the new graduates

= 1,000 + (1,000 / 2)

= 1,500 people

Labor force:

= Unemployed + employed people

= 1,500 + 6,000

= 7,500 people

Unemployment rate:

= 1,500 / 7,500

= 20%

Which of the following combinations is ensured to increase?

Answers

please you can give any option or full question

An educational software company wants to compare the effectiveness of teaching about supply and demand curves between computer animation presentations and textbook presentation. The company tests the economic knowledge of a number of first-year college students, then randomly divides them into two groups. One group uses the animation and the other studies the text. The company retests all the students and compares the increase in economic understanding between the two groups. Is the study described above an experiment? Why or why not?

Answers

Answer:

Yes, this is often an experiment. the corporate assigned students to either the animation or the text, instead of watching post hoc ergo propter hoc data.

Explanation:  

The explanatory variables are the pre-test data and therefore the assignment to a given group. The responding variable is that the post-test data.

A company purchases and uses 40000 gallons of materials for which they paid $3 a gallon. The materials price variance was $90000 favorable. What is the standard price per gallon?

Answers

Answer:

the standard price per gallon is $5.25

Explanation:

the computation of the standard price per gallon is given below;

Materials Price Variance = Actual Quantity × (Standard Price - Actual Price)

$90,000 = 40,000 × (Standard Price - $3)

$2.25 = Standard Price - $3

Standard Price = $5.25

Hence, the standard price per gallon is $5.25

The same should be considered

At the beginning of the period, the Cutting Department budgeted direct labor of $125,000, direct materials of $151,000 and fixed factory overhead of $11,800 for 8,000 hours of production. The department actually completed 10,600 hours of production. What is the appropriate total budget for the department, assuming it uses flexible budgeting? Round hourly rates to two decimal places. Round interim calculations to two decimal places. Round your final answer to the nearest dollar. a.$381,335 b.$377,606 c.$291,635 d.$287,800

Answers

Answer:

the  appropriate total budget should be $377,500

Explanation:

The computation of the appropriate total budget should be given below:

Direct material ($151,000 ÷ 8,000 × 10,600) $200,075

direct labor ($125,000 ÷ 8,000 × 10,600) $165,625

fixed factory overhead $11,800

Total budget cost 377,500

Hence, the  appropriate total budget should be $377,500

This is the answer but the same is not provided in the given options

A new machine requires an investment of $630,000 and will generate $100,000 in cash inflows for 7 years, at which time the salvage value of the machine will be $130,000. Using a discount rate of 10%, the net present value of the machine is $_________

Answers

Answer:

$-76,447.56

Explanation:

Net present value is the present value of after-tax cash flows from an investment less the amount invested.  

NPV can be calculated using a financial calculator  

Cash flow in Y0 = -630,000

Cash flow in Y1 - Y6 = 100,000

Cash flow in Y7 = 100,000 + 130,000

I = 10%

npv = $-76,447.56

To find the NPV using a financial calculator:

1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.

2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.  

3. Press compute  

Answer:

-76,510, (76,510)

Explanation:

Cara has just come in for her morning shift , but the sales floor is a mess . Looks like the night crew didn't clean up . She groans , but then gets to work cleaning the displays before customers come . If she doesn't , who else will ? What good problem - solving skills is she exhibiting? a ) Seeking advice when necessary Ob ) Open to seeing new perspectives c ) Having a solutions - oriented attitude

Answers

Answer:

having a solutions-oriented attitude

Explanation:

she seen things wasn't done so she starts cleaning because she takes pride in her job

From the list below, select the items that are classified as a materials activity. (You may select more than one answer. Single click the box with the question mark to produce a check mark for a correct answer and double click the box with the question mark to empty the box for a wrong answer. Any boxes left with a question mark will be automatically graded as incorrect.)
Raw materials used
Raw materials beginning inventory
Raw materials purchases
Work in process beginning inventory
Goods manufactured
Direct labor used
Factor overhead used

Answers

Answer and Explanation:

The classification is as follows:

Under Materials activity  

Opening balance of Raw materials inventory

Purchase of the Raw materials purchases

Under Production activity:

OPening balance of Work-in process inventory

Raw material used

Direct labor used

Factory overhead used

Under Sales activity:

Goods manufactured

In this way it should be categorized

Hence, the same should be relevant

Standish Company manufactures consumer products and provided the following information for the month of February:

Units produced 131,000
Standard direct labor hours per unit 0.20
Standard fixed overhead rate (per direct labor hour) $2.50
Budgeted fixed overhead $65,000
Actual fixed overhead costs $68,300
Actual hours worked 26,350

Required:
a. Calculate the fixed overhead spending variance using the formula approach.
b. Calculate the volume variance using the formula approach.

Answers

Answer and Explanation:

The computation is shown below:

a. Fixed overhead Spending Variance is

= Budgeted Fixed Overhead - Actual Fixed overhead

= $65000 - $68300

= - $3300 (unfavorable)

b.

Fixed Overhead Volume Variance is

= (131000 × 0.20 × $2.50) - $65000

=$65500 - $65000

= $500 Favorable

In this way these can be determined

why multinational company are developed​

Answers

Answer:

Multinationals provide an inflow of capital into the developing country.

Explanation:

This capital investment helps the economy develop and increase its productive capacity.

Multinational corporations (MNCs) have a global presence, even in developing countries. There are over 80,000 companies that drive the 21st-century economy. For example, Coca-Cola sells its product in nearly every country and has established over 900 bottling facilities worldwide. MNCs have propelled the GDP of their parent countries, most notably the United States, Japan, China and Western Europe, but how do their international operations affect developing countries?

It is difficult to say whether multinational corporations in developing countries are decidedly ‘good’ or ‘bad.’ One must consider many perspectives before making that judgment. However, researchers have identified a variety of positive and negative impacts applicable to most MNCs

Yard Tools manufactures lawnmowers, weed-trimmers, and chainsaws. Its sales mix and unit contribution margin are as follows.

Sales Mix Unit Contribution Margin
Lawnmowers 20% $33
Weed-trimmers 50% $21
Chainsaws 30% $37

Yard Tools has fixed costs of $4,200,000.

Required:
Compute the number of units of each product that Yard Tools must sell in order to break even under this product mix.

Answers

Answer:

Lawnmowers’ break-even point in units = 29,787 units

Weed-trimmers’ break-even point in units = 74,468 units

Chainsaws' break-even point in units = 44,681 unit

Explanation:

Given:

                                    Sales Mix              Unit Contribution Margin

Lawnmowers                 20%                                     $33

Weed-trimmers              50%                                     $21

Chainsaws                     30%                                     $37

The number of units of each product that Yard Tools must sell in order to break even under this product mix can be computed using Weighted-Average Contribution Margin Ratio as follows:

Weighted contribution margin = (Sales Mix of Lawnmowers * Unit Contribution Margin of Lawnmowers) + (Sales Mix of Weed-trimmers * Unit Contribution Margin of Weed-trimmers) + (Sales Mix of Chainsaws * Unit Contribution Margin of Chainsaws) = (20% * $33) + (50% * $21) + (30% * $37) = $28.20

Total break-even point in units for the company = Fixed cost / Weighted contribution margin = $4,200,000 / $28.20 = 148,936 units

Therefore, we have:

Lawnmowers’ break-even point in units = Sales Mix of Lawnmowers * Total break-even point in units for the company = 20% * 148,936 = 29,787 units

Weed-trimmers’ break-even point in units = Sales Mix of Weed-trimmers * Total break-even point in units for the company = 50% * 148,936 = 74,468 units

Chainsaw’s break-even point in units = Sales Mix of Chainsaws * Total break-even point in units for the company = 30% * 148,936 = 44,681 units

Question 4 of 10
Which situation best illustrates the process of capital formation?
O A. A farmer increases his profits by growing a variety of new crops.
B. An artist buys bonds that will increase in value over time.
C. An engineer tries to limit her spending during the week.
O D. A factory worker takes out a high-interest loan to buy a new home.
SUBMIT

Answers

Answer:

I think it is B

Explanation:

Answer:

an artist buys bondss that will increase in value over time.

Explanation:

took the test. UwU

Country A and Country B have had an informal trading arrangement for many years wherein merchants on the border of the countries may freely trade goods without the restriction of fees. Which of the following is true?

a. The government of Country A may not arbitrarily begin to charge fees for items brought in from Country B.
b. Country A and Country B have a binding agreement to this arrangement under customary international law.
c. Country A and Country B have no binding agreement under customary international law.
d. More than one response is correct.

Answers

Answer:

d. More than one response is correct.

Explanation:

Even though international law does not follow common law, and informal agreements are not enforceable between countries, they tend to facilitate the relationship between them. For example, Canada and the US do not have a strict border patrol and no one is asking for a wall to be built on the Canadian border. It is accepted that US and Canadian citizens cross almost freely as tourists. If someone tried to enforce a strong border policy, the other government would oppose it and it would turn into a diplomatic mess and would probably not be enforceable at all.

Midsouth Stitchery wants to improve their productivity. Their process yield is currently 91.56% based on 9816 yards of material. If they are going to improve their productivity to 92.10, how many yards of finished material will they have to produce from the same amount of material input

Answers

Answer:

9,040.54 yards

Explanation:

Input material amount I = 9,816 yards

Productivity P = 92.10%

Let Output Material amount be O

O = I * P

O = 9,816 yards * 0.9210

O = 9040.536

O = 9040.54 yards

So, the unit of yards they will have to produce from the same amount of material input is 9,040.54 yards

You have been asked by the president of your company to evaluate the proposed acquisition of a new special-purpose truck for $250,000. The truck falls into the MACRS three-year class, and it will be sold after three years for $50,000. Use of the truck will require an increase in NWC (spare parts inventory) of $5,000. The truck will have no effect on revenues, but it is expected to save the firm $80,000 per year in before-tax operating costs, mainly labor. The firm's marginal tax rate is 21 percent. What will the operating cash flow for this project be during year 3

Answers

Answer:

Please find the complete solution in the attachment file.

Explanation:

Please find the attachment table for the 3 years of cash flow:

Relevant Range and Fixed and Variable Costs
Vogel Inc. manufactures memory chips for electronic toys within a relevant range of 61,600 to 100,800 memory chips per year. Within this range, the following partially completed manufacturing cost schedule has been prepared:
Components produced 61,600 79,200 100,800
Total costs:
Total variable costs . . . . . . . . . $19,712 (d) (j)
Total fixed costs . . . . . . . . . . . . 22,176 (e) (k)
Total costs . . . . . . . . . . . . . . . . . $41,888 (f) (l)
Cost per unit:
Variable cost per unit . . . . . . . (a) (g) (m)
Fixed cost per unit . . . . . . . . . . (b) (h) (n)
Total cost per unit . . . . . . . . . . (c) (i) (o)
Complete the cost schedule below. When computing the cost per unit, round to two decimal places. Round all other values to the nearest dollar.
Cost Report
Components produced 61,600 79,200 100,800
Total costs:
Total variable costs $19,712 (d) $ (j) $
Total fixed costs 22,176 (e) (k)
Total costs $41,888 (f) $ (l) $
Cost per Unit
Variable cost per unit (a) $ (g) $ (m) $
Fixed cost per unit (b) (h) (n)
Total cost per unit (c) $ (i) $ (o) $

Answers

Answer:

Variable cost per unit is constant.

Total fixed cost is constant.

Explanation:

Boston Railroad decided to use the high-low method and operating data from the past six months to estimate the fixed and variable components of transportation costs. The activity base used by Boston Railroad is a measure of railroad operating activity, termed "gross-ton miles," which is the total number of tons multiplied by the miles moved. Transportation Costs Gross-Ton Miles January $1,454,100 323,000 February 1,621,300 361,000 March 1,145,800 234,000 April 1,554,400 350,000 May 1,303,700 281,000 June 1,671,400 380,000 Determine the variable cost per gross-ton mile and the fixed cost. Variable cost (Round to two decimal places.) $fill in the blank 1 per gross-ton mile Total fixed cost $fill in the blank 2

Answers

Answer:

Results are below.

Explanation:

Giving the following information:

Transportation Costs Gross-Ton Miles

January $1,454,100 323,000

February 1,621,300 361,000

March 1,145,800 234,000

April 1,554,400 350,000

May 1,303,700 281,000

June 1,671,400 380,000

To calculate the variable and fixed cost under the high-low method, we need to use the following formulas:

Variable cost per unit= (Highest activity cost - Lowest activity cost)/ (Highest activity units - Lowest activity units)

Variable cost per unit= (1,671,400 - 1,145,800) / (380,000 - 234,000)

Variable cost per unit= $3.6

Fixed costs= Highest activity cost - (Variable cost per unit * HAU)

Fixed costs= 1,671,400 - (3.6*380,000)

Fixed costs= $303,400

Fixed costs= LAC - (Variable cost per unit* LAU)

Fixed costs= 1,145,800 - (3.6*234,000)

Fixed costs= $303,400

In ________ organizational cultures, more individuality is shown through the organization’s rules being less strictly applied.

Answers

Answer:

weak

Explanation:

An organizational culture can be defined as the shared norms, beliefs, assumptions and values that exist in an organization.

An ethical climate can be defined as a collection of behaviors that are considered to be acceptable and correct within an organization or business firm. Also, an ethical climate provides the human resources management of an organization with a framework or benchmark on how employee behavioral issues or ethical problems are to be managed or handled within the organization.

In weak organizational cultures, more individuality of an employee working within an organization is shown as a result of the organization’s rules being less strictly applied.

On a related note, the rules guiding an organization are generally strictly being applied in strong organizational culture.

During a risk brainstorming session a team member identifies a risk. This particular risk does not seem to belong to any of the categories in you Risk Breakdown Structure (RBS). How should you respond

Answers

Answer:

Record it in the risk register, discuss potential responses and make a note to update the RBS.

Explanation:

Risk management is the process by which the management of an organisation identifies, assessed, and controls threats that may affect the company's capital or earnings.

The risks can be as a result of natural disasters, management error, financial uncertainty, or accidents.

In the given instance if a risk is not on any of the categories in you Risk Breakdown Structure (RBS), there is need to record it in the risk register, discuss potential responses and make a note to update the RBS.

Discuss various factors that must be considered on the warehouse location decisions? ​

Answers

Answer:

burglar proofing

Explanation:

security

Schell Company manufactures automobile floor mats. It currently has two product lines, the Standard and the Deluxe. Schell has a total of $25,740 in overhead. It currently uses a traditional cost system with overhead applied to the product on the basis of either labor hours or machine hours. Schell has compiled the following information about possible cost drivers and its two product lines:

Schell Company Total Quantity/Amount Consumed by Standard Floor Mat Line Quantity/Amount Consumed by Deluxe Floor Mat Line
1,170 labor hours 740 labor hours 430 labor hours
7,000 machine hours 2,900 machine hours 4,100 machine hours

Required:
a. Suppose Schell uses a traditional costing system with direct labor hours as the cost driver. Determine the amount of overhead assigned to each product line.
b. Suppose Schell uses a traditional costing system with machine hours as the cost driver. Determine the amount of overhead assigned to each product line.

Answers

Answer:

Schell Company

Overhead assigned:             Standard   Deluxe

a. Based on Labor hours      $16,280    $9,460

b. Based on Machine hours $10,663   $15,076

Explanation:

a) Data and Calculations:

Total overhead = $25,740

                           Total   Standard    Deluxe  Overhead Rate

Labor hours        1,170          740          430           $22 ($25,740/1,170)

Machine hours 7,000      2,900        4,100            $3.677 ($25,740/7,000)

Overhead assigned:             Standard   Deluxe

a. Based on Labor hours      $16,280    $9,460

                                         ($22 * 740)   ($22 * 430)

b. Based on Machine hours $10,663   $15,076

                                ($3.677 * 2,900)   ($3.677 * 4,100)

pllzzzzzzzzzzzzzzzzz ​

Answers

Answer:

liability risk

Explanation:

Answer:

liability risk is right opstion

In the short run, open-market purchases a. increase investment and real GDP, and decrease interest rates. b. increase real GDP and interest rates, and decrease investment. c. increase investment and interest rates, and decrease real GDP. d. decrease investment, interest rates, and real GDP.

Answers

Answer: a. increase investment and real GDP, and decrease interest rates.

Explanation:

During an Open Market Purchase, the central bank of the country would be buying back securities from the public which means that it would be infusing money into the economic system.

With an increased amount of money in the economy, people will be able to save more which means that interests rate will drop because there are now more loanable funds. This drop in interest rates will encourage more companies and people to borrow cash for investment which will then lead to a higher GDP.

In the short run, in the open-market purchase, there has been an increase in investment and real GDP and decreased interest rates. Thus option A is correct.

The interest rate has been the amount of interest lent onto the principal sum. The GDP has been the gross domestic product that has been the market value of the final products.

In the open-market purchase, there has been an increase in the amount of money in the market. The government has been buying the securities and results in the market flow of money. The market flow will eventually result in an increase in the GDP with the decreased interest rates.

Thus in the short run, in the open-market purchase, there has been an increase in investment and real GDP and decreased interest rates. Thus option A is correct.

For more information about the open market purchase, refer to the link:

https://brainly.com/question/3437168

Samir is a self-employed marketing consultant. He had no income from January through March 2020. His April through December 2020 income subject to SE tax is $55,000.
Samir's SE tax for 2020 is $7,771 [$55,000 x 0.9235 x 0.153 = $7,771]. Samir may reduce his estimated tax payments by how much? Hint: USE Form Schedule SE to help you find the answer.

Answers

Answer:

$3,886

Explanation:

Since SELF EMPLOYMENT TAX is 15.3% of your wages which is why the Internal Revenue Service (IRS) make it possible for you to deduct your employer equal portion of your self employment taxes that the employer pays during the year which is 7.65% Calculated as (15.3%/2) which therefore means that Samir may reduce his ESTIMATED TAX PAYMENTS by $3,886 [$55,000 x 0.9235 x 0.0765 = $3,886] while the remaining 7.65%( 15.3% -7.65%) are not deductible because they correspond to employee taxes.

Therefore he may reduce his ESTIMATED TAX PAYMENTS by $3,886.

Other Questions
Where do convection currents occur atmophere In your view, which one is the most important characteristic of a society?why? What is 9.4582 rounded to 1? please answer correctly and i will give 10 extra points 2 quc gia ng u th gii v xut khu la go The verbs of possession can be changed into present continuous tense.* true or false Given Isosceles Trapezoid TRAP, if mP=98, find mT Tm hai s c tng l 177. Nu bt s th nht i 17 n v v thm vo s th 25 n v th s th nht s bng 2/3 s th 2 Rays of light coming from the sun (a very distant object) are near and parallel to the principal axis of a concave mirror. After reflecting from the mirror, where will the rays cross each other at a single point? The rays __________ a. will not cross each other after reflecting from a concave mirror. b. will cross at the center of curvature. c. will cross at the point where the principal axis intersects the mirror. d. will cross at the focal point. will cross at a point beyond the center of curvature. what does range mean in maths A conical lids height is 2 centimeters less than the radius, x, of its base. If the lid is made of 25 cubic centimeters of clay, the equation x3 +? x2 +? = 0 can be used to find that the radius of lids base is centimeters. 1. true / false / doesn't say A parallel-plate capacitor consists of two plates, each with an area of 29 cm2cm2 separated by 3.0 mmmm. The charge on the capacitor is 7.8 nCnC . A proton is released from rest next to the positive plate. Part A How long does it take for the proton to reach the negative plate what qualities did settlers need to survive on the great plains HELP PLEASEIn which of the following scenarios would using a GIS be helpful? assessing the soil erosion risk within a watershedproviding navigation assistance to guide a lost driver to his destinationtranscribing inaccurate historical data into accurate historical mapscalculating local time when crossing the International Date Lineanalyzing the relationship between functional and formal regions Ok, so I'm trying to read piano sheet music, but I'm a bit confused. In the pic, can you guys tell me what they are and how does one play them on the keyboard? Like do you play one bar with the left hand and the other with the right hand? If so which bar goes with which hand? What is the slope of a line parallel to line B? Which of the following is a vector quantity? i. Force ii. Velocity iii. Acceleration iv. All of these 5771 9. During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of lodTe did not show Tyndall effect. Explain reason. ill) How can you relate particle size to Tyndall effect? Please hurry I will mark you brainliest What is the value of p so that the line passing through (6, 2) and (9, p) has a slope of -1?