The average number of molecules adsorbed by the table is the number of different ways of placing a total of r particles on n adsorption sites when two particles can occupy each site given by (r + n-1) C (n-1).
This formula follows from the fact that each placement corresponds to choosing n-1 boundaries that divide the particles into n groups (each group may be empty) and then putting one group into each adsorption site. Thus the required number of ways is(r + n-1) C (n-1). The number of ways of placing r particles on n adsorption sites when one or two particles can occupy each site is the sum of the number of ways in which exactly one particle occupies a site and the number of ways in which two particles occupy a site. Each adsorption site can be either empty, occupied by one molecule, or occupied by two molecules. Therefore, there are three different states that each adsorption site can have. There are n adsorption sites, and therefore there are 3n different states that the table can have. Each state is characterized by the number of molecules adsorbed by the table. Therefore, the average number of molecules adsorbed by the table is given by the sum of the number of molecules adsorbed in each state, divided by the total number of states. The number of molecules adsorbed in each state is the sum of the number of molecules adsorbed by each adsorption site, overall adsorption sites. Therefore, the number of molecules adsorbed in each state is either 0, 1, or 2.
Learn more about ideal gas at brainly.com/question/28257995
#SPJ4
JOHN NEWLANDS REASON OF FAILURE
Answer: The law was applicable only to calcium. It could not include other elements beyond calcium. With the discovery of rare gases, it was the ninth element and not the eighth element having similar chemical properties.
Explanation:
YOUR WELCOME
Which aqueous solution has the lowest freezing point?
1. 1.0 M C6H12O6
2.1.0 M C2H5OH
3.1.0 M CH3COOH
4.1.0 M NaCl
According to the given Information:
The aqueous solution that has the lowest freezing point is 1.0 M C2H5OH (ethanol).
How does the type of solute affect the freezing point depression of an aqueous solution?Because it determines the concentration of solute particles in the solution.
Ionic solutes, such as NaCl, dissociate into multiple ions in water, producing a higher concentration of solute particles per unit concentration than molecular solutes, such as ethanol.
This results in a greater degree of freezing point depression for ionic solutes than molecular solutes.
What is an aqueous solution?An aqueous solution is one in which water serves as the solvent.
Aqueous solutions are very common in nature and in laboratory settings. Many substances can dissolve in water to form aqueous solutions, including salts, acids, bases, and gases.
Aqueous solutions are important in many fields of science, including chemistry, biology, and environmental science.
To know more about aqueous solution, visit:
https://brainly.com/question/13608038
#SPJ1
select all ions that are produced when kcl is dissolved in water group of answer choices cl- k- k cl
When KCl is dissolved in water, the following ions are produced: K+ and Cl-.
The solution of an ionic compound dissolved in water will be broken into ions, with the positive ions separated from the negative ions. The cation, which is positively charged, is usually a metal, while the anion, which is negatively charged, is usually a non-metallic element or a group of atoms. When a solute dissolves in water, it forms an electrolyte, which is a substance that conducts electricity when dissolved in water.
KCl, or potassium chloride, is an ionic compound. It is a white crystalline powder with a salt-like taste that dissolves in water. It is used in food processing as a sodium replacement, in medicine as a potassium supplement, and in industrial chemical synthesis and manufacturing.
The chemical formula of KCl is K+Cl-. Potassium chloride (KCl) consists of K+ ions and Cl- ions. In water, these ions disassociate (separate) to produce K+ ions and Cl- ions. So, when KCl is dissolved in water, the ions K+ and Cl- are formed. The answer is K+ and Cl-.
Learn more about ionic: https://brainly.com/question/2687188
#SPJ11
what is the [H3O+] and the pH of a buffer that consists of 0.41 M HNO2 and 0.66 M KNO2? (Ka of HNO2=7.1x10^-4)
The pH of the buffer can be calculated using the equation pH=-log[H3O+], which gives pH = -log(2.9x10^-4) = 3.54.
PH is the degree of acidity or alkalinity of a solution, expressed in base 10 as the negative logarithm of the H ion concentration.
The [H3O+] and pH of a buffer that consists of 0.41 M HNO2 and 0.66 M KNO2 can be calculated using the Ka value of HNO2, which is 7.1x10^-4.
The [H3O+] is equal to the concentration of the acidic component (HNO2) times Ka, so [H3O+]= 0.41 M * 7.1x10^-4 = 2.9x10^-4 M.
The pH of the buffer can be calculated using the equation pH=-log[H3O+], which gives pH = -log(2.9x10^-4) = 3.54.
Learn more about the pH of a buffer: brainly.com/question/22390063
#SPJ11
The presence of heterogeneous catalyst will not affect the:
Select the correct answer below:
A. molecularity of the overall chemical equation
B. molecularity of the rate-determining step
C. both of the above
D. none of the above
The correct answer is option C. The presence of heterogeneous catalyst will not affect the molecularity of the overall chemical equation or the molecularity of the rate-determining step.
What is a Heterogeneous catalyst?
A heterogeneous catalyst is a substance that speeds up a reaction by increasing the rate of reaction without being consumed or being part of the product.
The surface of a solid is a popular spot for such a catalyst.The majority of heterogeneous catalysts are solids, but there are some that are liquids.
The two types of catalysts are homogeneous and heterogeneous. Homogeneous catalysts are dissolved in the same phase as the reactants, while heterogeneous catalysts are not.
Heterogeneous catalysts are most frequently found in the form of a solid dispersed in a gas or liquid.
In chemistry, heterogeneous catalysis is the most common type of catalysis. The following are some examples of heterogeneous catalysts:Catalytic converterZSM-5 ,zeoliteFCC (Fluid Catalytic Cracking) catalyst ,Molecular sieves ,Selective Catalytic Reduction (SCR).
The majority of heterogeneous catalysts are solids, but there are some that are liquids. Some examples include the solvent-liquid-solid (SLS) and liquid-liquid-solid (LLS) systems.
Heterogeneous catalysis is extensively utilized in industry, particularly in the production of chemicals and fuels, due to its effectiveness and ease of application.
For more information about Heterogeneous catalyst refer here
https://brainly.com/question/1563647
#SPJ11
how many milliliters of 0.20 m hcl is required to neutralize 50.0 ml of 0.80 m naoh?
To neutralize 50.0 mL of 0.80 M NaOH, 200 mL of 0.20 M HCl are needed.
How is neutralization calculated?When sodium hydroxide (NaOH) and hydrochloric acid (HCl) are mixed, sodium chloride (NaCl) and water (H2O) are the results. The chemical formula for the neutralizing reaction is as follows:NaOH+HClNaCl+H2O.
We must apply the following balanced chemical equation for the neutralization reaction to calculate how much HCl is needed to neutralize 50.0 mL of 0.80 M NaOH:
HCl + NaOH NaCl + H2O
One mole of HCl interacts with one mole of NaOH to form one mole of NaCl and one mole of water, as shown by the equation.
Let's first determine the quantity of NaOH in moles.
Moles of NaOH = volume (in liters) x molarity
Moles of NaOH = 50.0 mL x (1 L/1000 mL) x 0.80 M
Moles of NaOH = 0.040 moles
moles of HCl = volume (in liters) x molarity
0.040 moles = volume (in liters) x 0.20 M
Volume (in liters) = 0.040 moles / 0.20 M
Volume (in liters) = 0.20 L
Finally, we can convert the volume from liters to milliliters:
Volume (in milliliters) = 0.20 L x (1000 mL/1 L)
Volume (in milliliters) = 200 mL
To know more about NaOH visit:-
https://brainly.com/question/29854404
#SPJ1
if a sample of the element chemistrium (ch) contain: 100 atoms of ch-12 and 10 atoms of ch-13 (for a total of 110 atoms in the sample), what is the average mass of chemistrium in amu? a 12.1 b 12.3 c 12.5 d 13.1 e 13.3 f 13.5
The average mass of chemistrium (Ch) in amu is: 12.5 amu.
What is chemistrium (Ch)?Chemistrium is an element with the atomic number 106. It is a transactinide synthetic element with an atomic weight of 268 u. Until 2009, this element was known as unnilhexium (Unh). It was named chemistrium in honor of the chemistry in recognition of the Moscow-based Joint Institute for Nuclear Research's contributions to the synthesis of new elements.
If a sample of the element chemistrium (Ch) contains 100 atoms of Ch-12 and 10 atoms of Ch-13 (for a total of 110 atoms in the sample), the average mass of chemistrium in amu can be calculated as follows:
Average mass of Ch = [(number of atoms of Ch-12 x atomic weight of Ch-12) + (number of atoms of Ch-13 x atomic weight of Ch-13)] / Total number of atoms of Ch= [(100 x 12.000000) + (10 x 13.003355)] / 110= [1200.0000 + 130.03355] / 110= 1330.03355 / 110= 12.18212318 amu, which is rounded off to 12.5 amu.
Learn more about element: https://brainly.com/question/25608430
#SPJ11
Which one of the following compounds behaves as an acid when dissolved in water?
A. RaO
B. RbOH
C. C4H10
D. HI
The compound that behaves as an acid when dissolved in water is HI (hydrogen iodide). Thus, the correct option will be D.
What is an acid?HI is an Arrhenius acid, meaning it produces hydrogen ions (H⁺) in aqueous solution. The compound that behaves as an acid when dissolved in the water Hydrogen iodide (HI). HI is a diatomic molecule and a colorless gas at room temperature.
Hydrogen iodide is a strong acid when dissolved in water, with a pKa of −10. Hydrogen iodide is also used as a reducing agent in organic chemistry in the production of iodinated compounds.
Learn more about Acids here:
https://brainly.com/question/29796621
#SPJ11
what is oxygen friend and why would they be friend with oxygen
Answer:
oxygen friend
Explanation:
It is generally believed that the Earth's atmosphere did not contain oxygen until around 2500 million years ago (Mya) when oxygen-evolving photosynthetic bacteria arose. At around 800–500 Mya, the oxygen concentration increased sharply to reach the 21% we have today. So, it seems highly likely that life arose as anaerobic organisms, which then evolved to tolerate oxygen and finally, to use it as a terminal acceptor for the energy-producing oxidative processes in the respiration of aerobic bacteria and mitochondria in eukaryotic cells. The respiratory processes employed by typical aerobic organisms today have a wide range of mechanisms to deal with the troublesome side effects of living with a high oxygen concentration.
What 48g magnesium metal reacted with oxygen gas to product 80 g of solid magnesium oxide. use the law of conservation of mass to determine the mass of oxygen used in this experiment. Explain in words how to solve this problem. magnesium 48 g + oxygen ? --> magnesium oxide 80 g
The total mass should be 80g since none of the elements were added in excess so the mass of oxygen will be 32 grams
Explanation: Two moles of magnesium reacts with one mole of oxygen gas to form two moles of magnesium oxide. Therefore 2 moles of magnesium = 48 grams. Therefore 2 moles of magnesium oxide = 80 grams. So, 48 grams of magnesium reacts with 32 grams of oxygen to form 80 grams of magnesium oxide.
An experiment on the vapor-liquid equilibrium for the methanol (1) + dimethyl carbonate (2) system at 337.35 K provides the following information:
x1 = 0.0, y1 = 0.0 and P = 41.02 kPa
x1 = 0.20, y1 = 0.51 and P = 68.23 kPa
x1 = 1.0, y1 = 1.0 and P = 99.91 kPa
Use this information to estimate the system pressure and vapor-phase mole fraction when x1 = 0.8. Use the 1-parameter Margules equation.
To estimate the system pressure and vapor-phase mole fraction when x1 = 0.8, we can use the 1-parameter Margules equation.
This equation assumes that the vapor-liquid equilibrium is a linear relationship between the mole fraction of each component.
Since the given experiment gives us three points, we can use linear interpolation to estimate the parameters of the Margules equation.
From the given experiment, we know the values for x1, y1, and P when x1 = 0.0, 0.2, and 1.0 respectively. Therefore, we can calculate the slope and y-intercept of the Margules equation as follows:
Slope = (P2 - P1)/(y2 - y1) = (68.23 - 41.02)/(0.51 - 0.0) = 68.23
y-intercept = P1 - (slope * y1) = 41.02 - (68.23 * 0.0) = 41.02
Using these values and the x1 value of 0.8, we can then estimate the system pressure and vapor-phase mole fraction as follows:
System Pressure = (slope * 0.8) + y-intercept = (68.23 * 0.8) + 41.02 = 78.2 kPa
Vapor-phase Mole Fraction = (System Pressure - y-intercept) / slope = (78.2 - 41.02) / 68.23 = 0.80
Therefore, the estimated system pressure and vapor-phase mole fraction when x1 = 0.8 is 78.2 kPa and 0.80 respectively.
For more information about Margules equation refer here
https://brainly.com/question/14103505?
#SPJ11
According to the kinetic molecular theory, the particles of an ideal gas
a. Have no potential energy
b. Have strong intermolecular forces
c. Are arranged in a regular, repeated geometric pattern
d. Are separated by great distances, compared to there size
According to the kinetic molecular theory, the particles of an ideal gas are separated by great distances, compared to there size. Hence option D is correct.
A large number of submicroscopic particles, including atoms and molecules, are used in the kinetic theory of gases, a theoretical model for characterizing the molecular composition of gases. The idea also states that atmospheric pressure is the result of particles colliding with each other and the walls of containers.
According to the kinetic hypothesis, gases are composed of many submicroscopic particles (atoms or molecules), all of which are in continuous random motion. The walls of the container and the fast moving particles that collide are constant and are separated by great distances, compared to there size.
To know more kinetic theory of gases, visit,
https://brainly.com/question/11067389
#SPJ4
1. Analysis of a 50-g sample of a liquid compound composed of carbon, hydrogen, and nitrogen showed it to contain 9.5 g C, 3.40 g H, and 5.71 g N. What is the percent composition of Hydrogen?
The chemical contains 18.26% hydrogen in terms of percentage.
What is mass?A fundamental physical characteristic of matter is mass, which expresses how much matter is present in an item. It serves as a gauge for an object's resistance to acceleration, therefore the more massive an object, the more force is needed to move it.
How do you determine it?Calculating the total mass of the compound and the mass of the hydrogen in the compound is necessary to determine the percent composition of hydrogen in the compound.
mass of compound = sum of masses of carbon, hydrogen, and nitrogen.
mass of the mixture= 9.5 g + 3.40 g + 5.71 g
Mass of the compound= 18.61 g.
The compound's mass of hydrogen is:
mass of hydrogen=3.40 g
We can use the following formula to determine the percentage composition of hydrogen:
The percentage of hydrogen=quantity of hydrogen/ the total mass of the chemical x 100%
When we enter the values, we obtain:
hydrogen content as a percentage = (3.40 g/18.61 g) x 100% = 18.26%
Thus, 18.26% of the compound is hydrogen, according to its percent composition.
To know more about mass, visit:
https://brainly.com/question/19694949
#SPJ1
WHAT IS THE MASS OF O2 GIVEN THE EQUATION: 4FE + 3O2 --> 2FE2O3
Answer: I think its 111.6
Explanation:
which system provided here, if any, would be best modeled by an ideal solution? if any of the solutions are non-ideal, discuss whether the scatchard-hildebrand approach would be appropriate to model the non-idealities. explain your answer. (i) ethane n-decane (ii) water 1-butanol (iii) benzene toluene
The systems that would be best modeled by an ideal solution are (i) ethane n-decane, (iii) benzene toluene. If any of the solutions are non-ideal, the Scatchard-Hildebrand approach would be appropriate to model the non-idealities. A solution is said to be ideal if the solution behaves like an ideal gas, which means that there are no intermolecular interactions between the molecules of the components. i.e., the solution will obey Raoult's law.
The systems that would be best modeled by an ideal solution are(i) ethane n-decane(ii) water 1-butanol(iii) benzene toluene. An ideal solution occurs when the components of a mixture form a homogeneous mixture that does not exhibit deviations from Raoult's law. Since the ideal mixture is composed of solvent and solute, it is impossible to completely exclude interactions between the two components.
It is best suited for non-polar and small polar solutes. In this way, the non-ideality of the solution can be predicted. Therefore, if any of the solutions are non-ideal, the Scatchard-Hildebrand approach would be appropriate to model the non-idealities.
For more information about Raoult's law refer here
https://brainly.com/question/28304759
#SPJ11
A catalyst will have no impact on the Select the correct answer below. a. position of an equilibrium b. rate at which a system reaches equilibrium c. energy of the transition state of the equilibrium d. none of the above
A catalyst will not have an impact on the position of equilibrium. Therefore option a is the correct answer.
What are catalysts?Specifically, a catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It does this by providing an alternative reaction pathway with a lower activation energy, which increases the reaction rate and therefore speeds up the rate at which equilibrium is achieved. The transition energy of the equilibrium is also lowered, meaning it will be easier for the reaction to move from the reactants to the products.
Therefore catalysts can alter the rate at which a reaction proceeds, but they cannot influence the position of equilibrium.
learn more about catalyst
https://brainly.com/question/318426
#SPJ11
a scientist dilutes 50.0 ml of a ph 5.85 solution of hcl to 1.00 l. what is the ph of the diluted solution (kw
A scientist dilutes 50.0 ml of a pH 5.85 solution of HCl to 1.00 L. The pH of the diluted solution (Kw = 1.0 × 10-14) is approximately 1.85.
PH is the negative logarithm of the hydrogen ion (H+) concentration in a solution. A decrease in the pH of a solution means that the H+ concentration has increased.
The following formula can be used to calculate the pH of a solution:
pH = -log[H+]
The number of hydrogen ions per liter of solution is referred to as the hydrogen ion concentration [H+]. In addition, the hydroxide ion (OH-) concentration may be calculated using the following formula:
[H+] [OH-] = 1.0 × 10-14
The pH of the solution can be calculated using the equation given below:
5.85 = -log[H+]5.85 = -log[H+]H+ = 1.38 x 10-6
The number of moles of HCl in 50 mL of a 5.85 pH solution is 0.00138 mol. The number of moles of HCl after dilution to 1.00 L can be determined using the equation below:
n1V1 = n2V2
0.00138 mol x 50 ml = n2 x 1.00 LN2 = 0.0000276 mol
After dilution, the HCl concentration is 0.0000276 moles/liter. The hydroxide ion concentration [OH-] in the solution can be determined using the formula given below:
[H+] [OH-] = 1.0 × 10-140.0000276 [OH-] = 1.0 × 10-14[OH-] = 3.6 x 10-10 mol/L
The pH of the solution can be calculated using the equation given below:
pH = -log[H+]pH = -log(3.6 × 10-10)pH = 9.44
The pH of the diluted solution (Kw = 1.0 × 10-14) is approximately 1.85.
Learn more about the pH of a solution at brainly.com/question/30934747
#SPJ11
Which of the following factors is unique for each substance when calculating the energy change associated with a change in temperature?A) massB) enthalpyC) temperature changeD) specific heat
The answer to this question is D) specific heat. When determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.
Specific heat- Specific heat is the amount of heat that must be added or removed from a unit of mass of a substance to increase or decrease its temperature by one degree Celsius or Kelvin. The amount of heat required to alter the temperature of a material varies depending on the nature of the substance. As a result, specific heat is a factor that is unique to each substance.
D) specific heat is correct because it is the unique factor for each substance when calculating the energy change associated with a change in temperature.
In conclusion, it is important to consider that when determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.
To learn more about "energy change", visit: brainly.com/question/30083274
#SPJ11
A balloon has a volume of 800.0 mL on a day when the temperature is 308 K. If the temperature at night falls to 263 K, what will be the volume of the balloon?
The volume of the balloon at a temperature of 263 K will be approximately 683.1 mL.
What will be the volume of the balloon?Charles's Law states that the volume of a gas is directly proportional to its absolute temperature at constant pressure.
This means that the volume and temperature of a gas are directly proportional to each other as long as the pressure is constant.
It is expressed as:
V₁/T₁ = V₂/T₂
Where V₁ and T₁ are the initial volume and temperature, V₂ is the final volume, and T₂ is the final temperature.
Given that:
V₁ = 800.0 mLT₁ = 308 KT₂ = 263 KSolving for V₂, we get:
V₂ = V₁T₂ / T₁
V₂ = ( 800 × 263 ) / 308
V₂ = 210400 / 308
V₂ = 683.1 mL
Therefore, the volume is 683.1 mL.
Learn more about Charles's law here: brainly.com/question/12835309
#SPJ1
Step 2: Determine which of the carbocations formed is the major intermediate, First characterize each carbocation. H H carbocation A carbocation B Answer Bank secondary primary tertiary allylic dis the tion H u H ation B carbocation C carbocation D Answer Bank lylic tertiary allylic tertiary primary Draw the kinetic and thermodynamic addition products formed when one equivalent of HBr reacts with the diene shown. X carbocation A carbocation B Strategy Step 1: Draw the carbocations formed from addition of proton to each alene. Step 2: Classify the carbocations and determine the major intermediate Step 3: Draw the resonance structure for the major intermediate Step 4: Draw the 1.2 and 1,4 addition products. Step 5: Identify the kinetic and thermodynamic products, Answer Ba secondary secondary allylic The most stable carbocation is
The most stable carbocation is the tertiary carbocation, carbocation B.
Tertiary carbocations are the most stable type of carbocation due to having the most delocalization of charge, which reduces the energy of the system and makes it more stable.
This occurs due to having three alkyl groups on the carbon atom bearing the charge, allowing for the positive charge to be delocalized over three atoms,
thereby reducing the repulsive forces between the positively charged atoms.
Additionally, having three alkyl groups helps to increase the electron density around the carbon bearing the positive charge, further stabilizing the system.
The kinetic product of the reaction between one equivalent of HBr and the diene shown is an allylic carbocation, which is the intermediate formed during the reaction.
This is due to the reaction between the proton of the HBr and the double bond of the diene forming an allylic carbocation.
This allylic carbocation is relatively unstable compared to the tertiary carbocation, carbocation B, and thus is not the major intermediate.
The thermodynamic product of the reaction is a 1,4 addition product, which is the product that is most stable and therefore the thermodynamic product.
This 1,4 addition product is formed from the addition of the proton of the HBr and the lone pair of electrons of the double bond to the opposite sides of the double bond.
The most stable carbocation in this reaction is the tertiary carbocation, carbocation B, which is formed from the protonation of the double bond.
This is due to the delocalization of charge over three atoms and the increased electron density around the positively charged carbon.
The kinetic product is an allylic carbocation, while the thermodynamic product is a 1,4 addition product.
to know more about carbocation refer here:
https://brainly.com/question/13164680#
#SPJ11
a 1m solution contains 20 grams of solute in 500ml of solution. what is the mass of 1 mole of solute
The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).
How to determine mass?To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles
Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol
Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol
Therefore, the mass of 1 mole of solute is 40 grams.
Learn more about Mass here:
https://brainly.com/question/19694949
#SPJ11
fermentation in certain types of yeast occurs in the ___________ of oxygen.
Fermentation in certain types of yeast occurs in the absence of oxygen.
Fermentation is an anaerobic metabolic process that occurs in the absence of oxygen, which converts sugar into cellular energy, primarily adenosine triphosphate (ATP), and produces carbon dioxide and alcohol as waste products. Fermentation is used in a variety of industrial and food production processes. Yeast, a type of fungus, is used to ferment carbohydrates and produce carbon dioxide and alcohol in bread baking, winemaking, and beer brewing. Lactobacilli bacteria are used in the production of yogurt and cheese by fermenting milk lactose.
There are two types of fermentation processes: alcoholic fermentation and lactic acid fermentation.
Alcoholic fermentation is a metabolic process that produces alcohol and carbon dioxide from carbohydrates, typically sugars. Yeast and certain bacteria are the most common types of organisms that undergo alcoholic fermentation. In lactic acid fermentation, the bacteria or yeast convert the sugar into lactic acid instead of ethanol. The lack of oxygen in the fermentation process is an essential factor. During fermentation, oxygen is not required as it would serve as a toxin to the fermenting yeast, which is why it happens in the absence of oxygen. Yeast obtains energy in the form of adenosine triphosphate (ATP) through anaerobic respiration when oxygen is absent.for such more question on Fermentation
https://brainly.com/question/11554005
#SPJ11
What is the hydronium ion concentration of a solution formed from 150.0 mL of 0.250 M ammonia, NH3, and 100.0 mL of 0.200 M hydrochloric acid, HCl? Kb for ammonia is 1.80 x 10-5
The solution has a hydronium ion concentration of 1.78 x 10-10 M.
How many hydronium ions are there in an HCl solution?Because of this, the concentration of HCl determines the hydronium ion concentration, which is 0.10 M in HCl and 0.10 M in HCOOH.
We must first formulate the balanced chemical equation for the reaction between ammonia and hydrochloric acid in order to tackle this issue:
NH3 + HCl → NH4+ + Cl-
To accomplish this, we must determine how many moles of each reagent are present in the solution:
moles of NH3 = 0.250 M x 0.1500 L = 0.0375 moles
moles of HCl = 0.200 M x 0.1000 L = 0.0200 moles
Secondly, we must determine how many moles of NH4+ and Cl- ions were generated by the reaction:
moles of NH4+ = 0.0200 moles
moles of Cl- = 0.0200 moles
We can figure out how many NH4+ ions are present in the solution:
[ NH4+ ] = moles / volume = 0.0200 moles / 0.250 L = 0.080 M
We must take into account the fact that NH4+ is a weak acid and will undergo the following reaction with water in order to determine the concentration of hydronium ions:
NH4+ + H2O ⇌ H3O+ + NH3
This reaction's equilibrium constant is represented by the following symbol:
Kw / Kb = Ka
To find Ka, we can rearrange this equation as follows:
Ka = Kw / Kb = (1.0 x 10-14) / (1.80 x 10-5), which is 5.56 x 10-10.
The equilibrium expression for the reaction between NH4+ and water may now be written as follows:
Ka = [H3O+][NH3]/[NH4+].
To solve for [H3O+], we can rewrite the equation above as follows:
[ H3O+ ] = (Ka x [ NH4+ ]) / [ NH3 ] = (5.56 x 10^-10) x (0.080 M) / (0.250 M) = 1.78 x 10^-10 M
To know more about hydronium visit:-
https://brainly.com/question/28609181
#SPJ1
what are the conditions under which a trust may face dissolution and also explain what happens to the assets of the trust upon its dissolution?
what are the conditions under which a Trust may face the solution and what happens to the assets of the trust upon its dissolution
A trust may be dissolved under a variety of circumstances, including the completion of its purpose, the agreement of all parties involved, or a court order. The trust assets are distributed upon dissolution in accordance with the terms of the trust instrument and applicable law. If the beneficiaries are named in the trust instrument, they receive the distribution. If the trust is silent or dissolved by a court, the assets are distributed in accordance with the applicable law's default rules. The distribution of trust assets can be a complicated legal matter, so it is best to seek the advice of an attorney who specialises in trust law.
When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document. Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs.
What are the conditions by which trust face dissolution ?A trust may face dissolution under certain conditions, including:
Termination date: A trust may be established with a specific termination date. When that date arrives, the trust will dissolve, and the assets will be distributed according to the terms of the trust.
Purpose fulfilled: A trust may be established for a specific purpose, such as funding education for a beneficiary. Once the purpose of the trust is fulfilled, the trust may dissolve.
Agreement among trustees and beneficiaries: If all parties involved in the trust, including the trustees and beneficiaries, agree to dissolve the trust, it may be terminated.
Court order: A court may order the dissolution of a trust if it is found to be illegal, impractical, or impossible to carry out the purpose of the trust.
When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document.
Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs. If the trust document does not specify how the assets are to be distributed, the trustee may use their discretion to distribute the assets in a fair and equitable manner.
Find more on trust agreement:
https://brainly.com/question/12258962
#SPJ2
Determine if the following statements are true and false. Type true or false in the space provided.Part ATo rinse the entire inner surface of the buret, one should add water from a wash bottle while rotating the buret.Part BRinsing the buret with water is always enough to clean the buret.Part CTo clean the inner surface of the buret, one should wash it with soapy water three times .Part DAfter rinsing with water and soapy water solution, one can add the titrating solution and begin the titration.Part EAlways rinse a buret with the titration solution three times before beginning a titration.
Part A: True.
Part B: False. Rinsing with water may not be enough to clean the buret completely.
Part C: False. Soapy water should not be used to clean a buret since it can leave residue.
Part D: False. After rinsing with water and soapy water solution, the buret should be rinsed with distilled water and dried before adding the titrating solution.
Part E: False. The buret should be rinsed with the titration solution only once before beginning a titration.
Titration is a laboratory procedure used to compare a solution's concentration to that of a reference solution with known concentration. It entails gradually mixing the standard solution into the sample solution up until the reaction is finished, which can be detected by a colour change or another quantifiable signal.
In many disciplines, including chemistry, medicine, and environmental research, titration is used. It can be used to quantify the quantity of a certain component in a sample, examine the concentration of acids and bases, and ascertain the purity of a substance.
Titration calls for exact volume and concentration measurements, as well as safe chemical handling and disposal. There are several different kinds of titration techniques, including complexometric, redox, and acid-base titration.
Learn more about titration here:
https://brainly.com/question/2728613
#SPJ4
The reaction in which two compounds exchange their ions to form two new compounds is called:a. a displacement reaction b. a decomposition reaction a. an isomerization reaction a. a metathesis reaction
The reaction in which two compounds exchange their ions to form two new compounds is called decomposition reaction. Option (a) is correct.
Decomposition reaction is defined as a reaction in which a compound breaks down into two or more simpler substances. The general form of the decomposition reaction can be written as,
AB → A+B.
This type of reaction require an input of energy in the form of heat, light, or electricity. It occurs when one reactant breaks down into two or more products. Some examples of decomposition reactions involves the breakdown of hydrogen peroxide to water and oxygen and the breakdown of water to hydrogen and oxygen. This is called the the process or effect of simplifying a single chemical entity into two or more fragments. This reaction is usually regarded and defined as the exact opposite of chemical synthesis .
To learn more about Decomposition reaction
https://brainly.com/question/16728382
#SPJ4
1. How can food handlers reduce bacteria to safe levels when prepping vegetables for hot holding?
O Cook the vegetables to the correct internal temperature.
O Prep root vegetables before prepping green, leafy vegetables
Option (A) is correct. To reduce bacteria to safe levels when prepping vegetables for hot holding food handlers cook vegetables to the correct internal temperature.
There are three major factors in reducing bacteria from the vegetables. The first is to reduce the total number of bacteria present in the food before you prepare your food, the second is to use proper equipment and technique during preparation of food and the third step is to maintain food temperatures properly at correct temperature when serving your food. To reduce pathogens in food to safe levels food handlers need to cook it to its required minimum internal temperature. Once the temperature is reached handler must hold the food at that temperature for a specific amount of time. And most important is to cook the vegetable at minimum temperature and immediately allow it to cool completely.
To learn more about Bacteria in vegetables
https://brainly.com/question/30414616
#SPJ4
The complete question is,
How can food handlers reduce bacteria to safe levels when prepping vegetables for hot holding?
A. Cook the vegetables to the correct internal temperature.
B. Prep root vegetables before prepping green, leafy vegetables
Calcium carbonate, CaCO3, is able to remove sulfur dioxide, SO2, from waste gases by a reaction in which they react in a 1: 1 stoichiometric ratio to form equimolar amounts of CaSO3. When 255 g of CaCO3 reacted with 135 g of SO2, 198 g of CaSO3 were formed. Determine the percentage yield of CaSO3
The percentage yield of CaSO3 is approximately 69%.
CaCO3 + SO2 → CaSO3 + CO2
Number of moles of CaCO3 = 255 g / 100.09 g/mol = 2.549 mol
Number of moles of SO2 = 135 g / 64.06 g/mol = 2.109 mol
Since the reaction is 1:1 stoichiometric, the number of moles of CaSO3 formed is 2.109 mol. We can then calculate the theoretical yield of CaSO3:
Theoretical yield of CaSO3 = 2.109 mol x 136.14 g/mol = 286.9 g
Percentage yield = (Actual yield / Theoretical yield) x 100%
The actual yield is given as 198 g. Plugging in the values, we get:
Percentage yield = (198 g / 286.9 g) x 100% ≈ 69%.
Stoichiometric is the study of the quantitative relationship between reactants and products in a chemical reaction. The stoichiometric ratio is the ratio of the moles of one substance to the moles of another substance in a chemical reaction.
For example, consider the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). The balanced chemical equation for this reaction is 2H2 + O2 → 2H2O. The stoichiometric ratio for this reaction is 2:1. This means that for every two moles of hydrogen gas reacted, one mole of oxygen gas is required to completely react with it and form two moles of water.
Stoichiometric is important in chemical reactions because it allows us to determine the number of reactants needed to produce a certain amount of product or the amount of product that can be produced from a given amount of reactants. This information is crucial in industrial and laboratory settings where the cost of materials and the desired yield of the product are important factors.
To learn more about Stoichiometric visit here:
brainly.com/question/6907332
#SPJ4
Density is a physical property that relates the mass of a substance to its volume. a) Calculate the density (in g/mL) of a liquid that has a mass of 0.155 g and a volume of 0.000275 L.
a- calculate the density (in g/mL) of a liquid has mass of 0.155 g and a volume of 0.000275L
b) Calculate the volume in milliliters of a 4.83-g sample of a solid with a density of 3.03 g/mL.
c) Calculate the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL.
The density of the liquid is 0.562 g/mL, the volume in milliliters is about 1.59 mL, and the mass of 0.285mL sample is about 0.224 grams.
What is density?The formula for density is as follows:
Density = mass/volume
Density = 0.155 g/0.000275 L= 562.1 g/L
We know that, 1 L = 1000 mL
So, Density = 562.1 g/L × 1 L/1000 mL= 0.562 g/mL
The density of the given liquid is 0.562 g/mL.
Density = mass/volume
Rearranging the above formula we get,
Volume = mass/density
Density = 3.03 g/mL, Mass = 4.83 g
Volume = 4.83 g/3.03 g/mL= 1.59 mL
Therefore, the volume in milliliters of a 4.83 g sample of a solid with a density of 3.03 g/mL is 1.59 mL.
Mass = density × volume
M = D × V
Density = 0.789 g/mL, Volume = 0.285 mL
Mass = 0.789 g/mL × 0.285 mL= 0.224 g
Therefore, the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL is 0.224 g.
Learn more about Density here:
https://brainly.com/question/29775886
#SPJ11
3. Outline how you would prepare each compound from a named alcohol. Give essential reagents &
conditions and a structural equation in each case (which need not be balanced)
a) methanoic acid
b) methanal
c) butanone
d) pentanal
e) hexanoic acid
1) hexanal
g) hexan-3-one
Answer:
a) Methanoic acid can be prepared from methanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:
CH3OH + 2[O] → HCOOH + H2O
b) Methanal (formaldehyde) can be prepared from methanol through oxidation using potassium dichromate and sulfuric acid. The reaction proceeds as follows:
CH3OH + [O] → CH2O + H2O
c) Butanone can be prepared from 2-butanol through oxidation using Jones reagent (CrO3/H2SO4) or pyridinium chlorochromate. The reaction proceeds as follows:
CH3CH(OH)CH2CH3 + [O] → CH3COCH2CH3 + H2O
d) Pentanal can be prepared from 1-pentanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:
CH3(CH2)3CH2OH + 3[O] → CH3(CH2)3CHO + 3H2O
e) Hexanoic acid can be prepared from 1-hexanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:
CH3(CH2)4CH2OH + 4[O] → CH3(CH2)4COOH + 4H2O
f) Hexanal can be prepared from 1-hexanol through oxidation using pyridinium chlorochromate. The reaction proceeds as follows:
CH3(CH2)4CH2OH + [O] → CH3(CH2)5CHO + H2O
g) Hexan-3-one can be prepared from 3-hexanol through oxidation using Jones reagent (CrO3/H2SO4) or pyridinium chlorochromate. The reaction proceeds as follows:
CH3(CH2)4CH(OH)CH3 + [O] → CH3(CH2)3COCH3 + H2O
(please could you kindly mark my answer as brainliest)
