Consider the following chemical reaction:
2SO2 (g) + O2 (g) -----------> 2SO3 (g)
1.50 L. of sulfur trioxide at the pressure of 1.20 atm. and temperature of 25 oC is mixed with excess of oxygen.
Calclate volume of the product in L. at STP.
A. 11.2 L.
B. 1.65 L.
C. 16.5 L.
D. 0.129 L.

Answer:

the properties are:

these are all the properties but I think the two a solute needs to satisfy are

I hope this helps

Answer:

There are strong intermolecular forces between particles that make up liquids, but not gases.

Explanation:

Solids, liquids and gases are the three states of matter that exists. However, they possess varying properties that distinguishes them from one another. One of these properties is the strength of the intermolecular forces that hold their molecules together.

The intermolecular forces of each state of matter becomes weak in this order: solid>liquid>gas.

- Intermolecular forces in solid molecules are very strong, hence making them compact and well attached to each other.

- Intermolecular forces in liquid molecules are not too strong, hence, cannot exist in a fixed position but tend to flow.

- Intermolecular forces in gaseous molecules are very weak, hence, gases can move easily and rapidly in any given space.

Answer:

- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.

- One black ball and two black balls: they represent a compound formed by two different elements.

- One gray ball and two black balls: they represent a compound formed by two different elements.

- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.

Explanation:

Hey there!

In this case, according to the given information, we can firstly bear to mind the fact that each ball color represents a different element, for that reason we can tell the following:

- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.

- One black ball and two black balls: they represent a compound formed by two different elements.

- One gray ball and two black balls: they represent a compound formed by two different elements.

- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.

Regards!

Answer:

See explanation

Explanation:

a) The balanced reaction equation is;

Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH + PbCO3

b) When we include states of matter;

Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH(aq) + PbCO3 (s)

c) Complete ionic equation;

2Na^+(aq) + CO3^2-(aq) + Pb^2+(aq) + 2OH^-(aq) ----> 2Na^+(aq) + 2OH^-(aq) + PbCO3(s)

Net Ionic equation;

Pb^2+(aq) + CO3^2-(aq) ----> PbCO3(s)

he says he doesnt know sorry

Answer:

Percent yield  = 72.07 %

Explanation:

Our reaction is:

C₄H₁₀O + NaBr + H₂SO₄ → C₄H₉Br + NaHSO₄ + H₂O

It is correctly balanced.

Let's determine which is the limiting reagent:

45 g . 1 mol / 74 g = 0.608 moles of C₄H₁₀O

67.1 g . 1 mol / 102.9 g = 0.652 moles of NaBr

97 g . 1 mol / 98 g = 0.990 moles of sulfuric acid

Ratio is always 1:1, so for 1 mol of NaBr and 1 mol of sulfuric acid we need 1 mol of C₄H₁₀O. We have 0.652 moles of NaBr, we need the same amount of C₄H₁₀O and we have 0.990 moles of acid, we need the same amount of C₄H₁₀O; we only have 0.608 moles, that's why C₄H₁₀O is the limiting reactant, there's no enough C₄H₁₀O.

Ratio is also 1:1, between reactant and product.

1 mol of C₄H₁₀O produces 1 mol of C₄H₉Br

Then, 0.608 moles will produce 0.608 moles of C₄H₉Br

We convert moles to mass: 0.608 mol . 136.9 g/mol = 83.25 g

That's the 100 % yield reaction

Percent yield  = (Yield produced / Theoretical yield) . 100

Percent yield = (60 g / 83.25 g) . 100 = 72.07 %

Answer:

Option e.

Explanation:

Molarity is the concentration that indicates moles of solute in 1 L of solution.

We have another concentration, percent by mass.

Percent by mass indicates mass of solute in 100 g of solution.

Our solute is HNO₃, our solvent is water.

17.5 g of nitric acid is the mass of solute. We can convert them to moles:

17.5 g . 1mol / 63g = 0.278 moles

We do not have volume of solution. We assume the mass is 100 g because the percent by mass but we need density to state the volume.

Density = Mass / Volume

Mass / Density = Volume

Once we have the volume, we need to be sure the units is in L, to determine molarity

M = mol /L

Answer:

1) 0.00498 mol Cu.

2) 0.00000374 mol CO₂

Explanation:

Question 1)

We want to convert 3.00 * 10²¹ copper atoms into moles. Note that 3.00 is three significant figures.

Recall that by definition, one mole of a substance has exactly 6.022 * 10²³ amount of that substance. In other words, we have the ratio:

[tex]\displaystyle \frac{1\text{ mol}}{6.022\times 10^{23} \text{ Cu}}[/tex]

We are given 3.00 * 10²¹ Cu. To cancel out the Cu, we can multiply it by our above ratio with Cu in the denominator. Hence:

[tex]\displaystyle 3.00 \times 10^{21} \text{ Cu} \cdot \frac{1\text{ mol Cu}}{6.022\times 10^{23} \text{ Cu}}[/tex]

Cancel like terms:

[tex]=\displaystyle 3\times 10^{21} \cdot \frac{1\text{ mol Cu}}{6.022\times 10^{23} }[/tex]

Simplify:

[tex]\displaystyle = \frac{3\text{ mol Cu}}{6.022 \times 10^{2}}[/tex]

Use a calculator:

[tex]= 0.004981... \text{ mol Cu}[/tex]

Since the resulting answer must have three significant figures:

[tex]= 0.00498\text{ mol Cu}[/tex]

So, 3.00 * 10²¹ copper atoms is equivalent to approximately 0.00498 moles of copper.

Question 2)

We want to convert 2.25 * 10¹⁸ molecules of carbon dioxide into moles. Note that 2.25 is three significant digits.

By definition, there will be 6.022 * 10²³ carbon dioxide molecules in one mole of carbon dioxide. Hence:

[tex]\displaystyle \frac{6.022 \times 10^{23} \text{ CO$_2$}}{1\text{ mol CO$_2$}}[/tex]

To cancel the carbon dioxide from 2.25 * 10¹⁸, we can multiply it by the above ratio with the carbon dioxide in the denominator. Hence:

[tex]\displaystyle 2.25\times 10^{18} \text{ CO$_2$} \cdot \frac{1\text{ mol CO$_2$}}{6.022\times 10^{23} \text{ CO$_2$}}[/tex]

Cancel like terms:

[tex]\displaystyle= 2.25\times 10^{18} \cdot \frac{1\text{ mol CO$_2$}}{6.022\times 10^{23}}[/tex]

Simplify:

[tex]\displaystyle = \frac{2.25 \text{ mol CO$_2$}}{6.022\times 10^5}}[/tex]

Use a calculator:

[tex]=0.000003736...\text{ mol CO$_2$}[/tex]

Since the resulting answer must have three significant figures:

[tex]= 0.00000374\text{ mol CO$_2$}[/tex]

So, 2.25 * 10¹⁸ molecules of carbon dioxide is equivalent to approximately 0.00000374 moles of carbon dioxide.

Answer:

Explanation:

by definition, 1 mole contains 6.02 x 10^23 of atoms (for elements) or molecules (for compounds)

3.00 x 10^21 atoms of copper / 6.02 x 10^23 of atoms

= 0.004983 moles of copper

= 4.98 x 10^(-3) moles of copper

2.25 x 10^18 molecules of carbon dioxide / 6.02 x 10^23 of molecules

= 0.000003737 moles of carbon dioxide

= 3.74 x 10^(-6) moles of carbon dioxide

Solution :

[tex]$BF_3 (g) + BCl_3 (g) \rightarrow BF_2 Cl + BCl_F(g)$[/tex]

Explanation 1 :

Spontaneity of the reaction is based on two factors :

-- the tendency to acquire a state of minimum energy

-- the energy of a system to acquire a maximum randomness.

Now, since there isn't much difference in the bond enthalpies of B-F and B-Cl. So, we can say the major driving factor is tendency to acquire a state of maximum randomness.

Explanation 2 :

A system containing the [tex]\text{"chemically mixed"}[/tex] B halides has a [tex]\text{greater entropy}[/tex] than a system of [tex]$BCl_3$[/tex] and [tex]BF_3[/tex].

It has the same number of [tex]\text{gas phase molecules}[/tex], but more distinguishable kinds of [tex]\text{molecules}[/tex], hence, more microstates and higher entropy.

Answer:

the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Explanation:

Given the data in the question;

Co = 53 or [ 53 wt% B-47 wt% A ]

W∝ = 0.5 = Wβ

Cβ = 92 or [ 92 wt% B-8 wt% A ]

Now, lets set up the Lever rule for W∝ as follows;

W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]

so we substitute our given values into the expression;

0.5 = [ 92 - 53 ] / [ 92 - C∝ ]

0.5 = 39 /  [ 92 - C∝ ]

0.5[ 92 - C∝ ] = 39

46 - 0.5C∝  = 39

0.5C∝ = 46 - 39

0.5C∝ = 7

C∝ = 7 / 0.5

C∝ = 14  or [ 14 wt% B-86 wt% A ]

Therefore, the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Answer:

1.) Propanone (ketone)

2.) Ethanal( aldehyde)

3.) 3-phenyl-2-propenal (aldehyde)

4.) Butanone (ketone)

5.) Ethanol ( alcohol)

6.) 2-propanol (alcohol)

Explanation:

In organic chemistry, ALCOHOL ( also known as alkanol) are compounds in which hydroxyl groups are linked to alkyl groups. They can be considered as being derived from the corresponding alkanes by replacing the hydrogen atoms with hydroxyl groups. The hydroxyl group is the functional group of the alcohol as it is responsible for their characteristic chemical properties. A typical example of alcohol is ethanol and 2-propanol.

Alkanals or ALDEHYDES have the general formula RCHO while alkanones or KETONES have the general formula RR'CO where R and R' may be alkyl or aryl groups. The main similarity between these two classes of compounds is the presence of the carbonyl group. In aldehydes, there is a hydrogen atom attached to the carbon In the carbonyl group while there is none on the ketones.

Some common examples of ketones are Propanone, Butanone while examples of aldehydes are Ethanal and 3-phenyl-2-propenal

Answer:

Molar mass for eugenol is 161.3 g/mol

Explanation:

This question talks about freezing point depression:

Our solute is eugenol.

Our solvent is camphor.

Formula to state the freezing point depression difference is:

ΔT = Kf . m . i where

ΔT = Freezing T° of pure solvent - Freezing T° of solution

In this case ΔT = 0.62°C

Kf for camphor is: 37°C /m

As eugenol is an organic compund, i = 1. No ions are formed.

To state the molar mass, we need m (molal)

Molal are the moles of solute in 1kg of solvent. Let's replace data:

0.62°C = 40 °C/m . m . 1

0.62°C / 40 m/°C = 0.0155 m

We convert mass of camphor from g to kg = 100 g . 1kg / 1000g = 0.1 kg

0.0155 molal = moles of solute / 0.1 kg

0.0155 m/kg . 0.1 kg = 0.00155 moles

We know that these moles are contained in 250 mg, so the molar mass will be:

0.25 g / 0.00155 mol = 161.3 g/mol

Notice, we convert mg to g, for the units!

Answer:

[tex]\boxed {\boxed {\sf {One \ atom \ donates \ both \ electrons \ in \ a \ pair}}}[/tex]

Explanation:

A covalent bond involves the sharing of electrons to make the atoms more stable, and so they satisfy the Octet Rule (8 valence electrons).

Typically each atom contributes an electron to form an electron pair. This is a single bond. There are also double bonds (two pairs of electrons), triple bonds (three pairs of electrons), and coordinate covalent bonds.

Sometimes, to satisfy the Octet Rule and achieve stability, one atom contributes both of the electrons in an electron pair. This is different from other covalent bonds because usually each of the 2 atoms contributes an electron to make a pair.

Answer:

hydrogen bonding

Explanation:

just took the test :D

Answer:

10.71%

Explanation:

The dissociation of acetic acid can be well expressed as follow:

CH₃COOH ⇄   CH₃COO⁻  + H⁺

Let assume that the prepared amount of the aqueous solution is 14mM since it is not given:

Then:

The I.C.E Table is expressed as follows:

                     CH₃COOH       ⇄   CH₃COO⁻        +           H⁺  

Initial              0.0014                       0                                0

Change            - x                           +x                               +x

Equilibrium   (0.0014 - x)                 x                                 x

Recall that:

Ka for acetic acid CH₃COOH  = 1.8×10⁻⁵

∴

[tex]K_a = \dfrac{[x][x]]}{[0.0014-x]}[/tex]

[tex]1.8*10^{-5} = \dfrac{[x][x]]}{[0.0014-x]}[/tex]

[tex]1.8*10^{-5} = \dfrac{[x]^2}{[0.0014-x]}[/tex]

[tex]1.8*10^{-5}(0.0014-x) = x^2[/tex]

[tex]2.52*10^{-8} -1.8*10^{-5}x = x^2[/tex]

[tex]2.52*10^{-8} -1.8*10^{-5}x - x^2 =0[/tex]

By rearrangement:

[tex]- x^2 -1.8*10^{-5}x +2.52*10^{-8}= 0[/tex]

Multiplying through  by (-) and solving the quadratic equation:

[tex]x^2 +1.8*10^{-5}x-2.52*10^{-8}= 0[/tex]

[tex](-0.00015 + x) (0.000168 + x) =0[/tex]

x = 0.00015 or x = -0.000168

We will only consider the positive value;

so x=[CH₃COO⁻] = [H⁺] = 0.00015

CH₃COOH = (0.0014 - 0.00015) = 0.00125

However, the percentage fraction of the dissociated acetic acid is:

[tex]= \dfrac{ 0.00015}{0.0014}\times 100[/tex]

= 10.71%

Answer:

The correct answer is - 2.557 KJ

Explanation:

In this case, Hg is melting, the process is endothermic, so the energy change will have a positive sign.

we can calculate this energy by the following formula:

Q = met

where, m = mass,

e = specific heat

t = temperature

then,

Q = 78*0.14* (273-38.8)

here 0.14 = C(Hg)

= 2.557 Kj

Answer:

C. By super-cooling certain types of plasma.

Explanation:

Bose-Einstein condensate is a state of matter whereby atoms or particles become cooled to a very low energy state leading to their condensation to give a single quantum state.

Note that plasma refers to atoms that have had some or even all of its electrons stripped away leaving only positively charged ions. Simply put, plasma is ionized matter.

When certain types of plasma are super cooled, Bose-Einstein condensate are formed.

Answer:

The answer is "[tex]1.25 \times 10^{-3} \ \frac{m}{s}[/tex]"

Explanation:

Calculating the rate of the equation:

[tex]=-\frac{1}{2} \frac{\Delta [SO_2]}{\Delta t} =-\frac{\Delta [O_2]}{\Delta t}= +\frac{1}{2} \frac{\Delta [SO_3]}{\Delta t}\\\\=\frac{\Delta [SO_2]}{\Delta t}=\frac{0.0500-0.175\ M}{505}= -2.5 \times 10^{-3} \ \frac{m}{s}\\\\[/tex]

Rate:

[tex]=\frac{-2.5 \times 10^{-3}}{2}=1.25 \times 10^{-3} \ \frac{m}{s}[/tex]

To answer this question, we will first find out the number of gaseous moles on each side of the equilibrium

on the left:

we have 2 moles of A, 5 moles of B and 12 moles of C

which gives us a grand total of 19 gaseous moles

on the right:

here, we have 14 moles of AC gas, we will not count the number of moles of B because it's a solid

giving us 14 gaseous moles on the right

Where does the reaction shift?

more gaseous moles means more space taken, because gas likes to fill all the space it can

if we have more volume, more gas can move around without colliding (reacting) with each other

Hence more volume favors the side with more gaseous moles

here, the left has more gaseous moles. So we can say that the reaction will shift towards the left, or the reactants side

Answer:

Explanation:

given reversible chemical reaction:

2A(g) + 5B(g) + 12C(g)  ↔  14AC(g) + 5B(s)

chemicals in solid form do not take up a lot of volume so change in container volume has no effect

look at chemicals in gas form only:

the total no. of moles of reactants in gas form = 2 + 5 + 12 = 19

the total no. of moles of products in gas form = 14

so an increase in volume of the container will favor the reaction direction with higher volume n high volume means higher no. of moles

the ans is the equilibrium will move towards a) reactants

Explanation:

The given chemical reaction is:

[tex]2Br^- (aq) + I_2(s) <-> Br_2(l) + 2I^- (aq)[/tex]

[tex]E^ocell=oxidation potential of anode + reduction potential of cathode\\[/tex]

The relation between Eo cell and Keq is shown below:

[tex]deltaG=-RTlnK_e_q\\delta=-nFE^o cell\\=>nFE^o cell=RTlnK_e_q\\lnK_e_q=\frac{nF}{RT} E^o cell[/tex]

The value of Eo cell is:

Br- undergoes oxidation and I2 undergoes reduction.

Reduction takes place at cathode.

Oxidation takes place at anode.

Hence,

[tex]E^ocell= (-1.07+0.53)V\\=-0.54V[/tex]

F=96485 C/mol

n=2 mol

R=8.314 J.K-1.mol-1

T=298K

Substitute all these values in the above formula:

[tex]ln K_e_q=\frac{2mol* 96485 C/mol}{8.314 J.K^-^1.mol^-^1x298K} \\\\lnK_e_q=77.8\\K_e_q=e^7^7^.^8\\=>K_e_q=6.13x10^3^3[/tex]

Answer:

Keq=6.13x10^33

Answer:

density of second liquid = 650 kg/m³

Explanation:

Given that:

The volume of the plastic block submerged inside the water  = 0.5 V

The force on the plastic block  = [tex]\rho_1V_1g[/tex]

[tex]= 0.5p_1 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

W [tex]= 0.5p_1 V_g[/tex]

[tex]\rho Vg = 0.5p_1 V_g[/tex]

[tex]\rho = 0.5 \rho _1[/tex]

where;

water density [tex]\rho _1[/tex] = 1000

[tex]\rho = 0.5 (1000)[/tex]

[tex]\rho = 500 kg/m^3[/tex]

In the second liquid, the volume of plastic block in the water = (100-23)%

= 77% = 0.7 V

The force on the plastic block is:

[tex]= 0.77p_2 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

[tex]W = 0.77p_2 V_g[/tex]

[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]

[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]

Answer:

[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to set up this net ionic equation, by firstly setting up the complete molecular equation as follows:

[tex]H_2CO_3(aq)+2NaOH(aq)\rightarrow Na_2CO_3(aq)+2H_2O(l)[/tex]

Thus, since carbonic acid is weak it merely ionizes whereas sodium hydroxides ionizes for the 100 % as it is strong; thus, we can write the complete ionic equation:

[tex]H_2CO_3(aq)+2Na^+(aq)+2OH^-(aq)\rightarrow 2Na^+(aq)+(CO_3)^{2-}(aq)+2H_2O(l)[/tex]

Whereas sodium ions act as the spectator ones to be cancelled out for us to obtain:

[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]

Regards!

Answer:

3.00 L

Explanation:

P₁V₁ = P₂V₂

V₁ = 1.00 L

P₁ = (x) atm

P₂ = [tex]\frac{1}{3}[/tex] · (P₁) = [tex]\frac{x}{3}[/tex]

V₂ = unknown

(x atm)(1.00 L) = ( [tex]\frac{x}{3}[/tex] atm)(V₂)

divide both sides by ( [tex]\frac{x}{3}[/tex] atm)

( 1.00x )( [tex]\frac{3}{x}[/tex] ) = V₂

x cancels out

(1.00)(3) = V₂

V₂ = 3.00 L

Answer:

O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e

Explanation:

An oxidation reaction reaction refers to a reaction in which electrons are lost. In this case, we are about to see the full balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution.

The full equation is;

O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e

So, two electrons were lost in the process.

Answer:

a. 2..86 b. 4.86 c. 10.7 d. 8.7

Explanation:

a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA]

where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.

At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1

So, pH = pKa + log[A⁻]/[HA]

pH = pKa + log1

pH = pKa = 2.86

b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.

Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.

pH = pKa + log0.99x/0.01x

pH = pKa + log0.99/0.01

pH = 2.86 + log99

pH = 2.86 + 1.996

pH = 4.856

pH ≅ 4.86

c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA]

where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.

At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1

So, pH = pKa + log[A⁻]/[HA]

pH = pKa + log1

pH = pKa = 10.7

d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.

Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.

pH = pKa + log0.01x/0.99x

pH = pKa + log1/99

pH = 10.7 - log99

pH = 10.7 - 1.996

pH = 8.704

pH ≅ 8.7

Answer:

41 g

Explanation:

The equation of the reaction is;

Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)

Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles

1 mole of sodium phosphate reacts with 1 mole of chromium nitrate

x moles of sodium phosphate react as with 0.25 moles of chromium nitrate

x= 1 × 0.25/1

x= 0.25 moles

Mass of sodium phosphate = 0.25 moles × 163.94 g/mol

Mass of sodium phosphate = 41 g

Answer:

Physical

Chemical

Explanation:

Intermolecular forces are the forces that hold the molecules of a substance together in a particular state of matter. They decide the physical properties of a substance.

The intra molecular forces are the bond forces that hold atoms together in molecules. The nature of this bonding determines the chemical properties of substances.