Consider the reaction of 2-chloro-2-methylpentane with sodium iodide.
Assuming no other changes, how would it affect the rate if one simultaneously doubled the concentration of 2-chloro-2-methylpentane and sodium iodide?
A) No effect.
B) It would double the rate.
C) It would triple the rate.
D) It would quadruple the rate.
E) It would increase the rate five times.

Answer:

the metal become red hot

Best practices for fume hoods: work 25 cm inside, organize items to one side, use raised ledge; avoid open sash and quick movements.

Laboratory fume hoods must be used safely. Workers should operate at least 25 cm within the hood to preserve ventilation and avoid dangerous chemicals. Place things on one side of the hood to preserve ventilation and prevent clogging.

A raised ledge on the rear of the hood prevents things from falling in and impeding airflow. Avoid fully opening the sash to maintain ventilation and containment. Fast, rapid motions can interrupt airflow, so prevent them. These practises guarantee the fume hood contains harmful compounds, making the lab safer. Therefore, option (B), (D) and (E) are correct.

Learn more about fume hood, here:

https://brainly.com/question/29069541

#SPJ12

Answer:

(i). C6H2COOH and Na2CO3(aq)

observation: Bubbles of a colourless gas (carbon dioxide gas)

(ii) CH3CH2CH2OH and KMnO4 /H

observation: The orange solution turns green.

[This is because oxidation of propanol to propanoic acid occurs]

(iii) CH3CH2OH and CH3COOH + conc. H2SO4

observation: A sweet fruity smell is formed.

[This is because an ester, diethylether is formed]

(iv) CH3CH = CHCH3 and Br2 /H2O

observation: a brown solution is formed.

Answer:

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Explanation:

First of all, we out down the skeleton equation;

Al + MnO4- → MnO2 + Al(OH)4-

Secondly, we write the oxidation and reduction equation in basic medium;

Oxidation half equation:Al + 4H2O + 4OH- → Al(OH)4- + 4H2O + 3e-

Reduction half equation:MnO4- + 4H2O + 3e- → MnO2 + 2H2O + 4OH-

Thirdly, we add the two half reactions together to obtain:

Al + MnO4- + 8H2O + 4OH- + 3e- → Al(OH)4- + MnO2 + 6H2O + 3e- + 4OH-

Lastly, cancel out species that occur on both sides of the reaction equation;

Al + MnO4- + 8H2O→ Al(OH)4- + MnO2 + 6H2O

The simplified equation now becomes;

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Answer:

the relationship between independent and dependent variable

Explanation:

A straight line or linear graph is one of the ways to represent a given data. It shows the relationship between two given set of data; one called the independent variable is plotted on the x-axis (horizontal) while the other called the dependent variable is plotted on the y-axis (vertical).

The straighter the line is, the stronger the relationship between the two variables and vice versa. Hence, the straight line in the graph represents the relationship between independent and dependent variable.

Answer:

True

Explanation:

The value of the mole is equal to the number of atoms in exactly 12 grams of pure carbon-12. 12.00 g C-12 = 1 mol C-12 atoms = 6.022 × 1023 atoms • The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 1023).

In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.

The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:

The addition of barium hydroxide will raise the pH slightly because the buffer still working.

The initial moles of those species are:

Hypochlorous acid:

[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]

Sodium hypochlorite:

[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]

Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:

Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O

For a complete reaction of 0.092 moles of barium hydroxide are required:

[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]

As there are 0.370 moles, the moles of HClO after the reaction are:

0.370 moles - 0.184 moles = 0.186 moles of HClO will remain

As you still have hypochlorite and hypochlorous acid you still have a buffer.

Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.

Learn more about buffers in:

https://brainly.com/question/24302294

water is known as the mixture

Answer:

iv. Iron

water is not a mixture

hydrogen is the simplest element

air is pure

Answer:

Both have solutions in the  graduated cylinder.

Explanation:

Recording the amount of alcohol used as the difference between two masses is the wrong method used for measuring tert-butyl alcohol for the experiment.  For measuring tert-butyl alcohol for this experiment, the student has to measure the two masses when both the graduated cylinders has solution of tert-butyl alcohol not when one of it is empty (having no tert-butyl alcohol ).

The wrong aspect is that the liquid didn't need to be weighed. Instead the volume should have been recorded with the aid of the graduated cylinder.

This is a cylinder with marked readings and is used to measure the volume of liquids in the laboratory.

The graduated cylinder will accurately measure the amount of  alcohol used due to it being volatile and the mass fluctuating during the measurement.

Read  more about Graduated cylinder here https://brainly.com/question/24869562

Answer:

Methane and chlorine

If a mixture of methane and chlorine is exposed to a flame, it explodes - producing carbon and hydrogen chloride. This is not a very useful reaction! The reaction we are going to explore is a more gentle one between methane and chlorine in the presence of ultraviolet light - typically sunlight. This is a good example of a photochemical reaction - a reaction brought about by light.

CH4+Cl2+energy→CH3Cl+HCl(3.4.2)

The organic product is chloromethane. One of the hydrogen atoms in the methane has been replaced by a chlorine atom, so this is a substitution reaction. However, the reaction doesn't stop there, and all the hydrogens in the methane can in turn be replaced by chlorine atoms.

Substitution reactions happen in which hydrogen atoms in the methane are replaced one at a time by chlorine atoms. You end up with a mixture of chloromethane, dichloromethane, trichloromethane and tetrachloromethane.

I hope this help you!:)

Explanation:

Answer:

See explanation

Explanation:

The IUPAC name of aspirin is 2-Acetoxybenzoic acid. It is composed of an acetoxy moiety and a benzoic acid moiety.

The compound can be hydrolysed under prolonged storage conditions to yield acetic acid which causes the vinegar like odour.

Also, one of the products of this hydrolysis bears a phenol group which reacts with FeCl3 to give a purple color.

Answer:

Each molecule of O2 is made up of 2 oxygen atoms. So 1 mole of O2 molecules is made up of 2 moles of oxygen atoms. Therefore 1 mole of oxygen gas contains 2 moles of oxygen atoms. And 0.4 moles of oxygen gas contains 0.8 moles of oxygen atoms.

There are 0.8 moles of oxygen atoms in 0.4 moles of oxygen gas.

Oxygen gas (O₂) consists of two oxygen atoms bonded together. Therefore, to determine the number of moles of oxygen atoms present in a given amount of oxygen gas, we can simply multiply the number of moles of oxygen gas by the number of oxygen atoms per molecule, which is 2.

Given that we have 0.4 moles of oxygen gas, we can calculate the number of moles of oxygen atoms as follows:

Number of moles of oxygen atoms = Number of moles of oxygen gas × Number of oxygen atoms per molecule

= 0.4 moles × 2

= 0.8 moles

Therefore, there are 0.8 moles of oxygen atoms present in 0.4 moles of oxygen gas.

This calculation is based on the stoichiometry of oxygen gas, which indicates that each molecule of O₂ contains two oxygen atoms. By considering the mole ratio between oxygen gas and oxygen atoms, we can determine the number of moles of oxygen atoms in a given quantity of oxygen gas.

To learn more about moles, here

https://brainly.com/question/34302357

#SPJ2

Answer:

[H₃O⁺] = [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]  

Explanation:

By definition pH = -log[H⁺] => [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]

Using your calculator ... I am using a TI-30XA scientific calculator.

Depending on the calculator, the answer may show as 0.0138, or  1.38x10⁻², or 1.38E-2 (=1.38 x 10⁻²). It is the user's job to insert dimensional units into answer of interest =>  0.0138M, or  1.38 x 10⁻²M, or 1.38E-2M.

1.38E-2 which is 1.38 x 10⁻².

Answer:

D) these all have the same boiling point

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

Answer: Hợp chất CTHH 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 70 °C

Actini(III) hydroxide Ac(OH)3   0,0022    

Amonia NH3 1176 900 702 565 428 333 188

Amoni azua NH4N3 16  25,3  37,1  

View 42 more rows  

                    hehe

Answer:

A. tungsten

Explanation:

Tungsten is a material which high melting point ie. does not melt easily incase of high temperature

Answer:

option(A):Tungsten

Explanation:

tungsten has highest melting point.

Using boyles law

[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]

[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]

[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]

Answer:

[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]

Explanation:

We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.

[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]

The volume is changed to 0.92 liters, but the pressure is unknown.

[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]

We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]

The units of liters cancel each other out.

[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]

[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]

[tex]4.565217391 \ atm = P_2[/tex]

The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.

[tex]4.6 \ atm \approx P_2[/tex]

The pressure is approximately 4.6 atmospheres.

The number of replaceable electrons in an atom is called its valency.

Examples

Thanks !

☺️☺️☺️☺️☺️☺️☺️

Answer:

the combining capacity if an atom is know as valency.

the property of an element that determines the number of other atimd with an aton if the element can combine.

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Answer:

State functions represent quantities or properties of a thermodynamic system, while non-state functions represent a process during which the state functions change. For example, the state function PV is proportional to the internal energy of an ideal gas, but the work W is the amount of energy transferred as the system performs work.

Explanation:

Answer:

b

Explanation:

deposition is when water turns from gas to solid. b is the only one that fits

Deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

Deposition is a process that involves collection of large mass or when mean distance between molecules are reduced. It can also be explained as gathering of substances together to form a larger mass.

Therefore, the phenomenon explained in the given example about deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

Learn more about deposition here: https://brainly.com/question/6110024

Explanation:

From the question given above, the following data were obtained:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Number of half-lives (n) =?

n = t / t½

Finally, we shall determine the percentage remaining. This can be obtained as follow:

Let the original amount be N₀

Let the amount remaining be N

Number of half-lives (n) = 60 / 9.7

N = N₀ / 2ⁿ

Divide both side by N₀

N/N₀ = 1/2ⁿ

N/N₀ = 1 / 2⁽⁶⁰÷⁹•⁷⁾

N/N₀ = 0.0137

Multiply by 100 to express in percentage

N/N₀ = 0.0137 × 100

Therefore, the percentage remaining after 60 days is 1.37%

Learn more: https://brainly.com/question/14883322

Solution :

A substrate is defined as the chemical species that are being observed in the chemical reaction where the substrate reacts with a reagent and forms a product. It can also be referred to the surface where some other chemical reactions are performed.

Stereochemistry is defined as the study of relative spatial arrangement of the atoms which forms the structure of the molecules and their respective manipulations.

In the context, the products including the stereochemical designations for any chirality centers starting from the  (R)-3-methylhex-1-yne as the substrate are attached below.  

Explanation:

Add water, Na2CO3 dissolves, filter, PbCO3 stays in the paper and dissolved Na2CO3 goes through as the solution. Dry the PbCO3 and you have the dry solid.

OR

Add water to dissolve then filter to obtain PbCo3 as you're residue and Na2Co3 as the filtrate. Dry the insoluble PbCo3 between filter papers and you obtain solid PbCo3

Answer :

volume of a gas = weight * 22.4 l / gram molecular weight

volume of o2 = ?

weight given = 20.5 g

gram molecular weight of oxygen = 32 (because of 2 oxygen atoms )

volume of oxygen = 20.5 * 22.4 / 32

volume of oxygen = 14.35 liters  

Explanation:

hope this helps you

if wrong just correct me